165 lines
4.1 KiB
YAML
165 lines
4.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung S3C/S5P/Exynos SoC I2C Controller
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- samsung,s3c2410-i2c
|
|
- samsung,s3c2440-i2c
|
|
# For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
|
|
- samsung,s3c2440-hdmiphy-i2c
|
|
# For s3c2440-like I2C used as a host to SATA PHY controller on an
|
|
# internal bus:
|
|
- samsung,exynos5-sata-phy-i2c
|
|
|
|
'#address-cells':
|
|
const: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: i2c
|
|
|
|
gpios:
|
|
description: |
|
|
The order of the GPIOs should be the following:: <SDA, SCL>. The GPIO
|
|
specifier depends on the gpio controller. Required in all cases except
|
|
for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
|
|
permanently wired to the respective client.
|
|
This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
|
|
deprecated: yes
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
samsung,i2c-max-bus-freq:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Desired frequency in Hz of the bus.
|
|
default: 100000
|
|
|
|
samsung,i2c-sda-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Delay (in ns) applied to data line (SDA) edges.
|
|
default: 0
|
|
|
|
samsung,i2c-slave-addr:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Slave address in multi-master environment.
|
|
default: 0
|
|
|
|
samsung,sysreg-phandle:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: Pandle to syscon used to control the system registers.
|
|
|
|
'#size-cells':
|
|
const: 0
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/i2c/i2c-controller.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- samsung,s3c2440-hdmiphy-i2c
|
|
- samsung,exynos5-sata-phy-i2c
|
|
then:
|
|
properties:
|
|
gpios: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- samsung,s3c2410-i2c
|
|
- samsung,s3c2440-i2c
|
|
- samsung,s3c2440-hdmiphy-i2c
|
|
then:
|
|
required:
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/exynos5250.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
i2c@12c60000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C60000 0x100>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
samsung,i2c-slave-addr = <0x66>;
|
|
|
|
eeprom@50 {
|
|
compatible = "samsung,s524ad0xd1", "atmel,24c128";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@12ce0000 {
|
|
compatible = "samsung,s3c2440-hdmiphy-i2c";
|
|
reg = <0x12CE0000 0x1000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C_HDMI>;
|
|
clock-names = "i2c";
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
|
|
phy-i2c@38 {
|
|
compatible = "samsung,exynos4212-hdmiphy";
|
|
reg = <0x38>;
|
|
};
|
|
};
|
|
|
|
i2c@121d0000 {
|
|
compatible = "samsung,exynos5-sata-phy-i2c";
|
|
reg = <0x121D0000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SATA_PHYI2C>;
|
|
clock-names = "i2c";
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <40000>;
|
|
|
|
phy-i2c@38 {
|
|
compatible = "samsung,exynos-sataphy-i2c";
|
|
reg = <0x38>;
|
|
};
|
|
};
|