99 lines
2.1 KiB
YAML
99 lines
2.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NXP FXAS21002C Gyroscope
|
|
|
|
maintainers:
|
|
- Rui Miguel Silva <rmfrfs@gmail.com>
|
|
|
|
description: |
|
|
3 axis digital gyroscope device with an I2C and SPI interface.
|
|
http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
|
|
|
|
properties:
|
|
compatible:
|
|
const: nxp,fxas21002c
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
vdd-supply:
|
|
description: Regulator that provides power to the sensor
|
|
|
|
vddio-supply:
|
|
description: Regulator that provides power to the bus
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: GPIO connected to reset
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 2
|
|
description: Either interrupt may be triggered on rising or falling edges.
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
maxItems: 2
|
|
items:
|
|
enum:
|
|
- INT1
|
|
- INT2
|
|
|
|
drive-open-drain:
|
|
type: boolean
|
|
description: the interrupt/data ready line will be configured as open drain,
|
|
which is useful if several sensors share the same interrupt
|
|
line.
|
|
|
|
spi-max-frequency:
|
|
maximum: 2000000
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gyroscope@20 {
|
|
compatible = "nxp,fxas21002c";
|
|
reg = <0x20>;
|
|
|
|
vdd-supply = <®_peri_3p15v>;
|
|
vddio-supply = <®_peri_3p15v>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "INT1";
|
|
};
|
|
};
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gyroscope@0 {
|
|
compatible = "nxp,fxas21002c";
|
|
reg = <0x0>;
|
|
|
|
spi-max-frequency = <2000000>;
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "INT2";
|
|
};
|
|
};
|