117 lines
2.7 KiB
YAML
117 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/imu/st,lsm6dsx.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STM 6-axis (acc + gyro) IMU Mems sensors
|
|
|
|
maintainers:
|
|
- Lorenzo Bianconi <lorenzo@kernel.org>
|
|
|
|
description:
|
|
Devices have both I2C and SPI interfaces.
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- st,lsm6ds3
|
|
- st,lsm6ds3h
|
|
- st,lsm6dsl
|
|
- st,lsm6dsm
|
|
- st,ism330dlc
|
|
- st,lsm6dso
|
|
- st,asm330lhh
|
|
- st,lsm6dsox
|
|
- st,lsm6dsr
|
|
- st,lsm6ds3tr-c
|
|
- st,ism330dhcx
|
|
- st,lsm9ds1-imu
|
|
- st,lsm6ds0
|
|
- st,lsm6dsrx
|
|
- st,lsm6dst
|
|
- st,lsm6dsop
|
|
- st,lsm6dsv
|
|
- st,lsm6dso16is
|
|
- items:
|
|
- const: st,asm330lhhx
|
|
- const: st,lsm6dsr
|
|
- items:
|
|
- const: st,lsm6dstx
|
|
- const: st,lsm6dst
|
|
- items:
|
|
- const: st,lsm6dsv16x
|
|
- const: st,lsm6dsv
|
|
- items:
|
|
- const: st,ism330is
|
|
- const: st,lsm6dso16is
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 2
|
|
description:
|
|
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
|
|
|
|
vdd-supply:
|
|
description: if defined provides VDD power to the sensor.
|
|
|
|
vddio-supply:
|
|
description: if defined provides VDD IO power to the sensor.
|
|
|
|
st,drdy-int-pin:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
The pin on the package that will be used to signal data ready
|
|
enum:
|
|
- 1
|
|
- 2
|
|
|
|
st,pullups:
|
|
type: boolean
|
|
description: enable/disable internal i2c controller pullup resistors.
|
|
|
|
st,disable-sensor-hub:
|
|
type: boolean
|
|
description:
|
|
Enable/disable internal i2c controller slave autoprobing at bootstrap.
|
|
Disable sensor-hub is useful if i2c controller clock/data lines are
|
|
connected through a pull-up with other chip lines (e.g. SDO/SA0).
|
|
|
|
drive-open-drain:
|
|
type: boolean
|
|
description:
|
|
The interrupt/data ready line will be configured as open drain, which
|
|
is useful if several sensors share the same interrupt line.
|
|
|
|
wakeup-source:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
imu@6b {
|
|
compatible = "st,lsm6dsm";
|
|
reg = <0x6b>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
...
|