200 lines
5.4 KiB
YAML
200 lines
5.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics MEMS sensors
|
|
|
|
description: The STMicroelectronics sensor devices are pretty straight-forward
|
|
I2C or SPI devices, all sharing the same device tree descriptions no matter
|
|
what type of sensor it is.
|
|
Note that whilst this covers many STMicro MEMs sensors, some more complex
|
|
IMUs need their own bindings.
|
|
The STMicroelectronics sensor devices are pretty straight-forward I2C or
|
|
SPI devices, all sharing the same device tree descriptions no matter what
|
|
type of sensor it is.
|
|
|
|
maintainers:
|
|
- Denis Ciocca <denis.ciocca@st.com>
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- description: STMicroelectronics Accelerometers
|
|
enum:
|
|
- st,h3lis331dl-accel
|
|
- st,lis2de12
|
|
- st,lis2dw12
|
|
- st,lis2hh12
|
|
- st,lis2dh12-accel
|
|
- st,lis302dl
|
|
- st,lis331dl-accel
|
|
- st,lis331dlh-accel
|
|
- st,lis3de
|
|
- st,lis3dh-accel
|
|
- st,lis3dhh
|
|
- st,lis3l02dq
|
|
- st,lis3lv02dl-accel
|
|
- st,lng2dm-accel
|
|
- st,lsm303agr-accel
|
|
- st,lsm303c-accel
|
|
- st,lsm303dl-accel
|
|
- st,lsm303dlh-accel
|
|
- st,lsm303dlhc-accel
|
|
- st,lsm303dlm-accel
|
|
- st,lsm330-accel
|
|
- st,lsm330d-accel
|
|
- st,lsm330dl-accel
|
|
- st,lsm330dlc-accel
|
|
- description: Silan Accelerometers
|
|
enum:
|
|
- silan,sc7a20
|
|
- description: STMicroelectronics Gyroscopes
|
|
enum:
|
|
- st,l3g4200d-gyro
|
|
- st,l3g4is-gyro
|
|
- st,l3gd20-gyro
|
|
- st,l3gd20h-gyro
|
|
- st,lsm330-gyro
|
|
- st,lsm330d-gyro
|
|
- st,lsm330dl-gyro
|
|
- st,lsm330dlc-gyro
|
|
- st,lsm9ds0-gyro
|
|
- description: STMicroelectronics Magnetometers
|
|
enum:
|
|
- st,lis2mdl
|
|
- st,lis3mdl-magn
|
|
- st,lsm303agr-magn
|
|
- st,lsm303c-magn
|
|
- st,lsm303dlh-magn
|
|
- st,lsm303dlhc-magn
|
|
- st,lsm303dlm-magn
|
|
- st,lsm9ds1-magn
|
|
- description: STMicroelectronics Pressure Sensors
|
|
enum:
|
|
- st,lps001wp-press
|
|
- st,lps22df
|
|
- st,lps22hb-press
|
|
- st,lps22hh
|
|
- st,lps25h-press
|
|
- st,lps331ap-press
|
|
- st,lps33hw
|
|
- st,lps35hw
|
|
- description: IMUs
|
|
enum:
|
|
- st,lsm9ds0-imu
|
|
- description: Deprecated bindings
|
|
enum:
|
|
- st,lis302dl-spi
|
|
- st,lis3lv02d
|
|
deprecated: true
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
description: interrupt line(s) connected to the DRDY line(s) and/or the
|
|
Intertial interrupt lines INT1 and INT2 if these exist. This means up to
|
|
three interrupts, and the DRDY must be the first one if it exists on
|
|
the package. The trigger edge of the interrupts is sometimes software
|
|
configurable in the hardware so the operating system should parse this
|
|
flag and set up the trigger edge as indicated in the device tree.
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
vdd-supply: true
|
|
vddio-supply: true
|
|
|
|
st,drdy-int-pin:
|
|
description: the pin on the package that will be used to signal
|
|
"data ready" (valid values 1 or 2). This property is not configurable
|
|
on all sensors.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [1, 2]
|
|
|
|
drive-open-drain:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: the interrupt/data ready line will be configured
|
|
as open drain, which is useful if several sensors share the same
|
|
interrupt line. (This binding is taken from pinctrl.)
|
|
|
|
mount-matrix:
|
|
description: an optional 3x3 mounting rotation matrix.
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
# These have no interrupts
|
|
- st,lps001wp
|
|
then:
|
|
properties:
|
|
interrupts: false
|
|
st,drdy-int-pin: false
|
|
drive-open-drain: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
# These have only DRDY
|
|
- st,lis2mdl
|
|
- st,lis3l02dq
|
|
- st,lis3lv02dl-accel
|
|
- st,lps22df
|
|
- st,lps22hb-press
|
|
- st,lps22hh
|
|
- st,lps25h-press
|
|
- st,lps33hw
|
|
- st,lps35hw
|
|
- st,lsm303agr-magn
|
|
- st,lsm303dlh-magn
|
|
- st,lsm303dlhc-magn
|
|
- st,lsm303dlm-magn
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
maxItems: 1
|
|
st,drdy-int-pin: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
accelerometer@1c {
|
|
compatible = "st,lis331dl-accel";
|
|
reg = <0x1c>;
|
|
st,drdy-int-pin = <1>;
|
|
vdd-supply = <&ldo1>;
|
|
vddio-supply = <&ldo2>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
num-cs = <1>;
|
|
|
|
l3g4200d: gyroscope@0 {
|
|
compatible = "st,l3g4200d-gyro";
|
|
st,drdy-int-pin = <2>;
|
|
reg = <0>;
|
|
vdd-supply = <&vcc_io>;
|
|
vddio-supply = <&vcc_io>;
|
|
};
|
|
};
|
|
...
|