57 lines
1.8 KiB
Plaintext
57 lines
1.8 KiB
Plaintext
Synaptics RMI4 2D Sensor Device Binding
|
|
|
|
The Synaptics RMI4 core is able to support RMI4 devices using different
|
|
transports and different functions. This file describes the device tree
|
|
bindings for devices which contain 2D sensors using Function 11 or
|
|
Function 12. Complete documentation for transports and other functions
|
|
can be found in:
|
|
Documentation/devicetree/bindings/input/rmi4.
|
|
|
|
RMI4 Function 11 and Function 12 are for 2D touch position sensing.
|
|
Additional documentation for F11 can be found at:
|
|
http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
|
|
|
|
Optional Touch Properties:
|
|
Description in Documentation/devicetree/bindings/input/touchscreen
|
|
- touchscreen-inverted-x
|
|
- touchscreen-inverted-y
|
|
- touchscreen-swapped-x-y
|
|
- touchscreen-x-mm
|
|
- touchscreen-y-mm
|
|
|
|
Optional Properties:
|
|
- syna,clip-x-low: Sets a minimum value for X.
|
|
- syna,clip-y-low: Sets a minimum value for Y.
|
|
- syna,clip-x-high: Sets a maximum value for X.
|
|
- syna,clip-y-high: Sets a maximum value for Y.
|
|
- syna,offset-x: Add an offset to X.
|
|
- syna,offset-y: Add an offset to Y.
|
|
- syna,delta-x-threshold: Set the minimum distance on the X axis required
|
|
to generate an interrupt in reduced reporting
|
|
mode.
|
|
- syna,delta-y-threshold: Set the minimum distance on the Y axis required
|
|
to generate an interrupt in reduced reporting
|
|
mode.
|
|
- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
|
|
- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
|
|
disable reporing absolute position data.
|
|
- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero
|
|
command.
|
|
|
|
|
|
Example of a RMI4 I2C device with F11:
|
|
Example:
|
|
&i2c1 {
|
|
rmi4-i2c-dev@2c {
|
|
compatible = "syna,rmi4-i2c";
|
|
|
|
...
|
|
|
|
rmi4-f11@11 {
|
|
reg = <0x11>;
|
|
touchscreen-inverted-y;
|
|
syna,sensor-type = <2>;
|
|
};
|
|
};
|
|
};
|