106 lines
2.8 KiB
YAML
106 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
|
|
|
|
maintainers:
|
|
- Fabio Estevam <festevam@gmail.com>
|
|
|
|
allOf:
|
|
- $ref: serial.yaml#
|
|
- $ref: rs485.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: fsl,imx1-uart
|
|
- const: fsl,imx21-uart
|
|
- items:
|
|
- enum:
|
|
- fsl,imx25-uart
|
|
- fsl,imx27-uart
|
|
- fsl,imx31-uart
|
|
- fsl,imx35-uart
|
|
- fsl,imx50-uart
|
|
- fsl,imx51-uart
|
|
- fsl,imx53-uart
|
|
- fsl,imx6q-uart
|
|
- const: fsl,imx21-uart
|
|
- items:
|
|
- enum:
|
|
- fsl,imx6sl-uart
|
|
- fsl,imx6sll-uart
|
|
- fsl,imx6sx-uart
|
|
- const: fsl,imx6q-uart
|
|
- const: fsl,imx21-uart
|
|
- items:
|
|
- enum:
|
|
- fsl,imx6ul-uart
|
|
- fsl,imx7d-uart
|
|
- fsl,imx8mm-uart
|
|
- fsl,imx8mn-uart
|
|
- fsl,imx8mp-uart
|
|
- fsl,imx8mq-uart
|
|
- const: fsl,imx6q-uart
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
fsl,dte-mode:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: |
|
|
Indicate the uart works in DTE mode. The uart works in DCE mode by default.
|
|
|
|
fsl,inverted-tx:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: |
|
|
Indicate that the hardware attached to the peripheral inverts the signal
|
|
transmitted, and that the peripheral should invert its output using the
|
|
INVT registers.
|
|
|
|
fsl,inverted-rx:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: |
|
|
Indicate that the hardware attached to the peripheral inverts the signal
|
|
received, and that the peripheral should invert its input using the
|
|
INVR registers.
|
|
|
|
fsl,dma-info:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 2
|
|
maxItems: 2
|
|
description: |
|
|
First cell contains the size of DMA buffer chunks, second cell contains
|
|
the amount of chunks used for the device. Multiplying both numbers is
|
|
the total size of memory used for receiving data.
|
|
When not being configured the system will use default settings, which
|
|
are sensible for most use cases. If you need low latency processing on
|
|
slow connections this needs to be configured appropriately.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
aliases {
|
|
serial0 = &uart1;
|
|
};
|
|
|
|
uart1: serial@73fbc000 {
|
|
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
|
|
reg = <0x73fbc000 0x4000>;
|
|
interrupts = <31>;
|
|
uart-has-rtscts;
|
|
fsl,dte-mode;
|
|
};
|