582 lines
11 KiB
Plaintext
582 lines
11 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/soc/bcm-pmb.h>
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "brcm,brahma-b53";
|
|
reg = <0x0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0xfff8>;
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "brcm,brahma-b53";
|
|
reg = <0x1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0xfff8>;
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "brcm,brahma-b53";
|
|
reg = <0x2>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0xfff8>;
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "brcm,brahma-b53";
|
|
reg = <0x3>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0xfff8>;
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
l2: l2-cache0 {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
axi@81000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00 0x00 0x81000000 0x4000>;
|
|
|
|
gic: interrupt-controller@1000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x1000 0x1000>,
|
|
<0x2000 0x2000>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
clocks {
|
|
periph_clk: periph_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00 0x00 0x80000000 0x281000>;
|
|
|
|
enet: ethernet@2000 {
|
|
compatible = "brcm,bcm4908-enet";
|
|
reg = <0x2000 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "rx", "tx";
|
|
};
|
|
|
|
usb_phy: usb-phy@c200 {
|
|
compatible = "brcm,bcm4908-usb-phy";
|
|
reg = <0xc200 0x100>;
|
|
reg-names = "ctrl";
|
|
power-domains = <&pmb BCM_PMB_HOST_USB>;
|
|
dr_mode = "host";
|
|
brcm,has-xhci;
|
|
brcm,has-eohci;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@c300 {
|
|
compatible = "generic-ehci";
|
|
reg = <0xc300 0x100>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb_phy PHY_TYPE_USB2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@c400 {
|
|
compatible = "generic-ohci";
|
|
reg = <0xc400 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb_phy PHY_TYPE_USB2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
xhci: usb@d000 {
|
|
compatible = "generic-xhci";
|
|
reg = <0xd000 0x8c8>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb_phy PHY_TYPE_USB3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bus@80000 {
|
|
compatible = "simple-bus";
|
|
#size-cells = <1>;
|
|
#address-cells = <1>;
|
|
ranges = <0 0x80000 0x50000>;
|
|
|
|
ethernet-switch@0 {
|
|
compatible = "brcm,bcm4908-switch";
|
|
reg = <0x0 0x40000>,
|
|
<0x40000 0x110>,
|
|
<0x40340 0x30>,
|
|
<0x40380 0x30>,
|
|
<0x40600 0x34>,
|
|
<0x40800 0x208>;
|
|
reg-names = "core", "reg", "intrl2_0",
|
|
"intrl2_1", "fcb", "acb";
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
|
brcm,num-gphy = <5>;
|
|
brcm,num-rgmii-ports = <2>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports: ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy8>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy9>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy10>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy11>;
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
phy-mode = "internal";
|
|
ethernet = <&enet>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio: mdio@405c0 {
|
|
compatible = "brcm,unimac-mdio";
|
|
reg = <0x405c0 0x8>;
|
|
reg-names = "mdio";
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
phy8: ethernet-phy@8 {
|
|
reg = <8>;
|
|
};
|
|
|
|
phy9: ethernet-phy@9 {
|
|
reg = <9>;
|
|
};
|
|
|
|
phy10: ethernet-phy@a {
|
|
reg = <10>;
|
|
};
|
|
|
|
phy11: ethernet-phy@b {
|
|
reg = <11>;
|
|
};
|
|
|
|
phy12: ethernet-phy@c {
|
|
reg = <12>;
|
|
};
|
|
};
|
|
};
|
|
|
|
procmon: bus@280000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x280000 0x1000>;
|
|
ranges;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
pmb: power-controller@2800c0 {
|
|
compatible = "brcm,bcm4908-pmb";
|
|
reg = <0x2800c0 0x40>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
bus@ff800000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00 0x00 0xff800000 0x3000>;
|
|
|
|
twd: timer-mfd@400 {
|
|
compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
|
|
reg = <0x400 0x4c>;
|
|
ranges = <0x0 0x400 0x4c>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
timer@0 {
|
|
compatible = "brcm,bcm63138-timer";
|
|
reg = <0x0 0x28>;
|
|
};
|
|
|
|
watchdog@28 {
|
|
compatible = "brcm,bcm6345-wdt";
|
|
reg = <0x28 0x8>;
|
|
};
|
|
};
|
|
|
|
gpio0: gpio-controller@500 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg-names = "dirout", "dat";
|
|
reg = <0x500 0x28>, <0x528 0x28>;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
|
|
pinctrl@560 {
|
|
compatible = "brcm,bcm4908-pinctrl";
|
|
reg = <0x560 0x10>;
|
|
|
|
pins_led_0_a: led_0-a-pins {
|
|
function = "led_0";
|
|
groups = "led_0_grp_a";
|
|
};
|
|
|
|
pins_led_1_a: led_1-a-pins {
|
|
function = "led_1";
|
|
groups = "led_1_grp_a";
|
|
};
|
|
|
|
pins_led_2_a: led_2-a-pins {
|
|
function = "led_2";
|
|
groups = "led_2_grp_a";
|
|
};
|
|
|
|
pins_led_3_a: led_3-a-pins {
|
|
function = "led_3";
|
|
groups = "led_3_grp_a";
|
|
};
|
|
|
|
pins_led_4_a: led_4-a-pins {
|
|
function = "led_4";
|
|
groups = "led_4_grp_a";
|
|
};
|
|
|
|
pins_led_5_a: led_5-a-pins {
|
|
function = "led_5";
|
|
groups = "led_5_grp_a";
|
|
};
|
|
|
|
pins_led_6_a: led_6-a-pins {
|
|
function = "led_6";
|
|
groups = "led_6_grp_a";
|
|
};
|
|
|
|
pins_led_7_a: led_7-a-pins {
|
|
function = "led_7";
|
|
groups = "led_7_grp_a";
|
|
};
|
|
|
|
pins_led_8_a: led_8-a-pins {
|
|
function = "led_8";
|
|
groups = "led_8_grp_a";
|
|
};
|
|
|
|
pins_led_9_a: led_9-a-pins {
|
|
function = "led_9";
|
|
groups = "led_9_grp_a";
|
|
};
|
|
|
|
pins_led_10_a: led_10-a-pins {
|
|
function = "led_10";
|
|
groups = "led_10_grp_a";
|
|
};
|
|
|
|
pins_led_11_a: led_11-a-pins {
|
|
function = "led_11";
|
|
groups = "led_11_grp_a";
|
|
};
|
|
|
|
pins_led_12_a: led_12-a-pins {
|
|
function = "led_12";
|
|
groups = "led_12_grp_a";
|
|
};
|
|
|
|
pins_led_13_a: led_13-a-pins {
|
|
function = "led_13";
|
|
groups = "led_13_grp_a";
|
|
};
|
|
|
|
pins_led_14_a: led_14-a-pins {
|
|
function = "led_14";
|
|
groups = "led_14_grp_a";
|
|
};
|
|
|
|
pins_led_15_a: led_15-a-pins {
|
|
function = "led_15";
|
|
groups = "led_15_grp_a";
|
|
};
|
|
|
|
pins_led_16_a: led_16-a-pins {
|
|
function = "led_16";
|
|
groups = "led_16_grp_a";
|
|
};
|
|
|
|
pins_led_17_a: led_17-a-pins {
|
|
function = "led_17";
|
|
groups = "led_17_grp_a";
|
|
};
|
|
|
|
pins_led_18_a: led_18-a-pins {
|
|
function = "led_18";
|
|
groups = "led_18_grp_a";
|
|
};
|
|
|
|
pins_led_19_a: led_19-a-pins {
|
|
function = "led_19";
|
|
groups = "led_19_grp_a";
|
|
};
|
|
|
|
pins_led_20_a: led_20-a-pins {
|
|
function = "led_20";
|
|
groups = "led_20_grp_a";
|
|
};
|
|
|
|
pins_led_21_a: led_21-a-pins {
|
|
function = "led_21";
|
|
groups = "led_21_grp_a";
|
|
};
|
|
|
|
pins_led_22_a: led_22-a-pins {
|
|
function = "led_22";
|
|
groups = "led_22_grp_a";
|
|
};
|
|
|
|
pins_led_23_a: led_23-a-pins {
|
|
function = "led_23";
|
|
groups = "led_23_grp_a";
|
|
};
|
|
|
|
pins_led_24_a: led_24-a-pins {
|
|
function = "led_24";
|
|
groups = "led_24_grp_a";
|
|
};
|
|
|
|
pins_led_25_a: led_25-a-pins {
|
|
function = "led_25";
|
|
groups = "led_25_grp_a";
|
|
};
|
|
|
|
pins_led_26_a: led_26-a-pins {
|
|
function = "led_26";
|
|
groups = "led_26_grp_a";
|
|
};
|
|
|
|
pins_led_27_a: led_27-a-pins {
|
|
function = "led_27";
|
|
groups = "led_27_grp_a";
|
|
};
|
|
|
|
pins_led_28_a: led_28-a-pins {
|
|
function = "led_28";
|
|
groups = "led_28_grp_a";
|
|
};
|
|
|
|
pins_led_29_a: led_29-a-pins {
|
|
function = "led_29";
|
|
groups = "led_29_grp_a";
|
|
};
|
|
|
|
pins_led_30_a: led_30-a-pins {
|
|
function = "led_30";
|
|
groups = "led_30_grp_a";
|
|
};
|
|
|
|
pins_led_31_a: led_31-a-pins {
|
|
function = "led_31";
|
|
groups = "led_31_grp_a";
|
|
};
|
|
|
|
pins_hs_uart: hs_uart-pins {
|
|
function = "hs_uart";
|
|
groups = "hs_uart_grp";
|
|
};
|
|
|
|
pins_i2c_a: i2c-a-pins {
|
|
function = "i2c";
|
|
groups = "i2c_grp_a";
|
|
};
|
|
|
|
pins_i2c_b: i2c-b-pins {
|
|
function = "i2c";
|
|
groups = "i2c_grp_b";
|
|
};
|
|
|
|
pins_i2s: i2s-pins {
|
|
function = "i2s";
|
|
groups = "i2s_grp";
|
|
};
|
|
|
|
pins_nand_ctrl: nand_ctrl-pins {
|
|
function = "nand_ctrl";
|
|
groups = "nand_ctrl_grp";
|
|
};
|
|
|
|
pins_nand_data: nand_data-pins {
|
|
function = "nand_data";
|
|
groups = "nand_data_grp";
|
|
};
|
|
|
|
pins_emmc_ctrl: emmc_ctrl-pins {
|
|
function = "emmc_ctrl";
|
|
groups = "emmc_ctrl_grp";
|
|
};
|
|
|
|
pins_usb0_pwr: usb0_pwr-pins {
|
|
function = "usb0_pwr";
|
|
groups = "usb0_pwr_grp";
|
|
};
|
|
|
|
pins_usb1_pwr: usb1_pwr-pins {
|
|
function = "usb1_pwr";
|
|
groups = "usb1_pwr_grp";
|
|
};
|
|
};
|
|
|
|
uart0: serial@640 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x640 0x18>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&periph_clk>;
|
|
clock-names = "refclk";
|
|
status = "okay";
|
|
};
|
|
|
|
leds: leds@800 {
|
|
compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
|
|
reg = <0x800 0xdc>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
nand-controller@1800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
|
|
reg = <0x1800 0x600>, <0x2000 0x10>;
|
|
reg-names = "nand", "nand-int-base";
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "nand_ctlrdy";
|
|
status = "okay";
|
|
|
|
nandcs: nand@0 {
|
|
compatible = "brcm,nandcs";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
i2c@2100 {
|
|
compatible = "brcm,brcmper-i2c";
|
|
reg = <0x2100 0x58>;
|
|
clock-frequency = <97500>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_i2c_a>;
|
|
status = "disabled";
|
|
};
|
|
|
|
misc@2600 {
|
|
compatible = "brcm,misc", "simple-mfd";
|
|
reg = <0x2600 0xe4>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00 0x2600 0xe4>;
|
|
|
|
reset-controller@2644 {
|
|
compatible = "brcm,bcm4908-misc-pcie-reset";
|
|
reg = <0x44 0x04>;
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&twd>;
|
|
offset = <0x34>;
|
|
mask = <1>;
|
|
};
|
|
};
|