kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

1041 lines
25 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
*/
#include "imx8mp.dtsi"
/ {
model = "DH electronics i.MX8M Plus DHCOM SoM";
compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
aliases {
ethernet0 = &eqos;
ethernet1 = &fec;
rtc0 = &rv3032;
rtc1 = &snvs_rtc;
spi0 = &flexspi;
};
memory@40000000 {
device_type = "memory";
/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
reg = <0x0 0x40000000 0 0x08000000>;
};
reg_eth_vio: regulator-eth-vio {
compatible = "regulator-fixed";
gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pinctrl_enet_vio>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "eth_vio";
vin-supply = <&buck4>;
};
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 19 0>; /* SD2_RESET */
off-on-delay-us = <12000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VDD_3V3_SD";
startup-delay-us = <100>;
vin-supply = <&buck4>;
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
status = "disabled";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "disabled";
};
&eqos { /* First ethernet */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-handle = <&ethphy0g>;
phy-mode = "rgmii-id";
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
/* Up to one of these two PHYs may be populated. */
ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
compatible = "ethernet-phy-id0007.c110",
"ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio3>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy0>;
pinctrl-names = "default";
reg = <1>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
/* Non-default PHY population option. */
status = "disabled";
};
ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
compatible = "ethernet-phy-id0022.1642",
"ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio3>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <0>;
pinctrl-0 = <&pinctrl_ethphy0>;
pinctrl-names = "default";
reg = <5>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
/* Default PHY population option. */
status = "okay";
};
};
};
&fec { /* Second ethernet */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-handle = <&ethphy1f>;
phy-mode = "rgmii";
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Up to one PHY may be populated. */
ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
compatible = "ethernet-phy-id0007.c110",
"ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy1>;
pinctrl-names = "default";
reg = <1>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
/* Non-default PHY population option. */
status = "disabled";
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "disabled";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
status = "disabled";
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
flash@0 { /* W25Q128JWPIM */
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&gpio1 {
gpio-line-names =
"DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio2 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "DHCOM-K", "", "", "", "",
"", "", "", "", "DHCOM-INT", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "SOM-HW0", "",
"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
};
&gpio4 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "SOM-HW1", "", "", "", "",
"", "", "", "DHCOM-D", "", "", "", "";
};
&gpio5 {
gpio-line-names =
"", "", "DHCOM-C", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
"", "", "", "", "", "", "", "";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic: pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
/*
* i.MX 8M Plus Data Sheet for Consumer Products
* 3.1.4 Operating ranges
* MIMX8ML8CVNKZAB
*/
regulators {
buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-ramp-delay = <3125>;
regulator-always-on;
regulator-boot-on;
};
buck2: BUCK2 { /* VDD_ARM */
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-ramp-delay = <3125>;
regulator-always-on;
regulator-boot-on;
};
buck4: BUCK4 { /* VDD_3V3 */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
buck5: BUCK5 { /* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
buck6: BUCK6 { /* NVCC_DRAM_1V1 */
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
ldo1: LDO1 { /* NVCC_SNVS_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3: LDO3 { /* VDDA_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4: LDO4 { /* PMIC_LDO4 */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo5: LDO5 { /* NVCC_SD2 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
adc@48 {
compatible = "ti,tla2024";
reg = <0x48>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 { /* Voltage over AIN0 and AIN1. */
reg = <0>;
};
channel@1 { /* Voltage over AIN0 and AIN3. */
reg = <1>;
};
channel@2 { /* Voltage over AIN1 and AIN3. */
reg = <2>;
};
channel@3 { /* Voltage over AIN2 and AIN3. */
reg = <3>;
};
channel@4 { /* Voltage over AIN0 and GND. */
reg = <4>;
};
channel@5 { /* Voltage over AIN1 and GND. */
reg = <5>;
};
channel@6 { /* Voltage over AIN2 and GND. */
reg = <6>;
};
channel@7 { /* Voltage over AIN3 and GND. */
reg = <7>;
};
};
touchscreen@49 {
compatible = "ti,tsc2004";
reg = <0x49>;
interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch>;
vio-supply = <&buck4>;
};
eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */
compatible = "atmel,24c02";
pagesize = <16>;
reg = <0x50>;
};
rv3032: rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
};
eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */
compatible = "atmel,24c02";
pagesize = <16>;
reg = <0x53>;
};
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
pinctrl-1 = <&pinctrl_i2c4_gpio>;
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c5 { /* HDMI EDID bus */
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c5>;
pinctrl-1 = <&pinctrl_i2c5_gpio>;
scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pinctrl_pwm1>;
pinctrl-names = "default";
status = "disabled";
};
&uart1 {
/* CA53 console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
/* Bluetooth */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
uart-has-rtscts;
status = "okay";
/*
* PLL1 at 80 MHz supplies UART2 root with 80 MHz clock,
* which with 16x oversampling yields 5 Mbdps baud base,
* which can be well divided by 5/4 to achieve 4 Mbdps,
* which is exactly the maximum rate supported by muRata
* 2AE bluetooth UART.
*/
assigned-clocks = <&clk IMX8MP_CLK_UART2>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
assigned-clock-rates = <80000000>;
bluetooth {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_bt>;
compatible = "cypress,cyw4373a0-bt";
shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
max-speed = <4000000>;
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&usb_dwc3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0_vbus>;
dr_mode = "otg";
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&usb_dwc3_1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1_vbus>;
dr_mode = "host";
status = "okay";
};
/* SDIO WiFi */
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
vmmc-supply = <&buck4>;
bus-width = <4>;
non-removable;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
brcmf: bcrmf@1 { /* muRata 2AE */
reg = <1>;
compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
/*
* The "host-wake" interrupt output is by default not
* connected to the SoC, but can be connected on to
* SoC pin on the carrier board.
*/
reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
};
/* SD slot */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmmc-supply = <&buck4>;
vqmmc-supply = <&buck5>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-0 = <&pinctrl_hog_base
&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
/* GPIO_M is connected to CLKOUT2 */
&pinctrl_dhcom_int>;
pinctrl-names = "default";
pinctrl_dhcom_a: dhcom-a-grp {
fsl,pins = <
/* ENET_QOS_EVENT0-OUT */
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2
>;
};
pinctrl_dhcom_b: dhcom-b-grp {
fsl,pins = <
/* ENET_QOS_EVENT0-IN */
MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2
>;
};
pinctrl_dhcom_c: dhcom-c-grp {
fsl,pins = <
/* GPIO_C */
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2
>;
};
pinctrl_dhcom_d: dhcom-d-grp {
fsl,pins = <
/* GPIO_D */
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2
>;
};
pinctrl_dhcom_e: dhcom-e-grp {
fsl,pins = <
/* GPIO_E */
MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2
>;
};
pinctrl_dhcom_f: dhcom-f-grp {
fsl,pins = <
/* GPIO_F */
MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2
>;
};
pinctrl_dhcom_g: dhcom-g-grp {
fsl,pins = <
/* GPIO_G */
MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2
>;
};
pinctrl_dhcom_h: dhcom-h-grp {
fsl,pins = <
/* GPIO_H */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2
>;
};
pinctrl_dhcom_i: dhcom-i-grp {
fsl,pins = <
/* CSI1_SYNC */
MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2
>;
};
pinctrl_dhcom_j: dhcom-j-grp {
fsl,pins = <
/* CSIx_#RST */
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2
>;
};
pinctrl_dhcom_k: dhcom-k-grp {
fsl,pins = <
/* CSIx_PWDN */
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2
>;
};
pinctrl_dhcom_l: dhcom-l-grp {
fsl,pins = <
/* CSI2_SYNC */
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2
>;
};
pinctrl_dhcom_int: dhcom-int-grp {
fsl,pins = <
/* INT_HIGHEST_PRIO */
MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2
>;
};
pinctrl_hog_base: dhcom-hog-base-grp {
fsl,pins = <
/* GPIOs for memory coding */
MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080
MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080
MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080
/* GPIOs for hardware coding */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080
MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080
>;
};
pinctrl_ecspi1: dhcom-ecspi1-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44
MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44
MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40
>;
};
pinctrl_ecspi2: dhcom-ecspi2-grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
>;
};
pinctrl_eqos: dhcom-eqos-grp { /* RGMII */
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
>;
};
pinctrl_enet_vio: dhcom-enet-vio-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
>;
};
pinctrl_ethphy0: dhcom-ethphy0-grp {
fsl,pins = <
/* ENET1_#RST Reset */
MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
/* ENET1_#INT Interrupt */
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22
>;
};
pinctrl_ethphy1: dhcom-ethphy1-grp {
fsl,pins = <
/* ENET1_#RST Reset */
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11
/* ENET1_#INT Interrupt */
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11
>;
};
pinctrl_fec: dhcom-fec-grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f
>;
};
pinctrl_flexcan1: dhcom-flexcan1-grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
>;
};
pinctrl_flexcan2: dhcom-flexcan2-grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154
MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154
>;
};
pinctrl_flexspi: dhcom-flexspi-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
>;
};
pinctrl_hdmi: dhcom-hdmi-grp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
>;
};
pinctrl_i2c3: dhcom-i2c3-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084
>;
};
pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84
>;
};
pinctrl_i2c4: dhcom-i2c4-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084
>;
};
pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84
MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84
>;
};
pinctrl_i2c5: dhcom-i2c5-grp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084
MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084
>;
};
pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84
MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
>;
};
pinctrl_pmic: dhcom-pmic-grp {
fsl,pins = <
/* PMIC_nINT */
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
>;
};
pinctrl_pwm1: dhcom-pwm1-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6
>;
};
pinctrl_rtc: dhcom-rtc-grp {
fsl,pins = <
/* RTC_#INT Interrupt */
MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080
>;
};
pinctrl_touch: dhcom-touch-grp {
fsl,pins = <
/* #TOUCH_INT */
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080
>;
};
pinctrl_uart1: dhcom-uart1-grp {
fsl,pins = <
/* Console UART */
MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49
MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49
MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49
MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49
>;
};
pinctrl_uart2: dhcom-uart2-grp {
fsl,pins = <
/* Bluetooth UART */
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49
MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
>;
};
pinctrl_uart2_bt: dhcom-uart2-bt-grp {
fsl,pins = <
/* BT_REG_EN */
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
>;
};
pinctrl_uart3: dhcom-uart3-grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49
MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49
MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49
MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49
>;
};
pinctrl_uart4: dhcom-uart4-grp {
fsl,pins = <
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
>;
};
pinctrl_usb0_vbus: dhcom-usb0-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
>;
};
pinctrl_usb1_vbus: dhcom-usb1-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6
MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80
>;
};
pinctrl_usdhc1: dhcom-usdhc1-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
/* WL_REG_EN */
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
/* WL_REG_EN */
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
/* WL_REG_EN */
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
pinctrl_usdhc2: dhcom-usdhc2-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20
>;
};
pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080
>;
};
pinctrl_usdhc3: dhcom-usdhc3-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
>;
};
pinctrl_wdog: dhcom-wdog-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
>;
};
};
Reference in New Issue View Git Blame Copy Permalink