1205 lines
26 KiB
Plaintext
1205 lines
26 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright 2016 MediaTek Inc.
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/regulator/dlg,da9211-regulator.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "mt8173.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
mmc0 = &mmc0;
|
|
mmc1 = &mmc1;
|
|
mmc2 = &mmc3;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x40000000 0 0x80000000>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm0 0 1000000>;
|
|
power-supply = <&bl_fixed_reg>;
|
|
enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&panel_backlight_en_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
bl_fixed_reg: fixedregulator2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "bl_fixed";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
startup-delay-us = <1000>;
|
|
enable-active-high;
|
|
gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bl_fixed_pins>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pins>;
|
|
|
|
switch-lid {
|
|
label = "Lid";
|
|
gpios = <&pio 69 GPIO_ACTIVE_LOW>;
|
|
linux,code = <SW_LID>;
|
|
linux,input-type = <EV_SW>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
switch-power {
|
|
label = "Power";
|
|
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_POWER>;
|
|
debounce-interval = <30>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
switch-tablet-mode {
|
|
label = "Tablet_mode";
|
|
gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <SW_TABLET_MODE>;
|
|
linux,input-type = <EV_SW>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
switch-volume-down {
|
|
label = "Volume_down";
|
|
gpios = <&pio 123 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
switch-volume-up {
|
|
label = "Volume_up";
|
|
gpios = <&pio 124 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
panel_fixed_3v3: regulator1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "PANEL_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&panel_fixed_pins>;
|
|
};
|
|
|
|
ps8640_fixed_1v2: regulator2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "PS8640_1V2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-enable-ramp-delay = <2000>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ps8640_fixed_pins>;
|
|
};
|
|
|
|
sdio_fixed_3v3: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio_fixed_3v3_pins>;
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "mediatek,mt8173-rt5650";
|
|
mediatek,audio-codec = <&rt5650 &hdmi0>;
|
|
mediatek,platform = <&afe>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&aud_i2s2>;
|
|
|
|
mediatek,mclk = <1>;
|
|
codec-capture {
|
|
sound-dai = <&rt5650 1>;
|
|
};
|
|
};
|
|
|
|
hdmicon: connector {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
type = "a";
|
|
ddc-i2c-bus = <&hdmiddc0>;
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&hdmi0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "arm,smc-wdt";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Disable the original MMIO watch dog and switch to the SMC watchdog, which
|
|
* operates on the same MMIO.
|
|
*/
|
|
&watchdog {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mfg_async {
|
|
domain-supply = <&da9211_vgpu_reg>;
|
|
};
|
|
|
|
&cec {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
proc-supply = <&mt6397_vpca15_reg>;
|
|
};
|
|
|
|
&cpu1 {
|
|
proc-supply = <&mt6397_vpca15_reg>;
|
|
};
|
|
|
|
&cpu2 {
|
|
proc-supply = <&da9211_vcpu_reg>;
|
|
sram-supply = <&mt6397_vsramca7_reg>;
|
|
};
|
|
|
|
&cpu3 {
|
|
proc-supply = <&da9211_vcpu_reg>;
|
|
sram-supply = <&mt6397_vsramca7_reg>;
|
|
};
|
|
|
|
&cpu_thermal {
|
|
sustainable-power = <4500>; /* milliwatts */
|
|
trips {
|
|
threshold: trip-point0 {
|
|
temperature = <60000>;
|
|
};
|
|
|
|
target: trip-point1 {
|
|
temperature = <65000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
ports {
|
|
port {
|
|
dsi0_out: endpoint {
|
|
remote-endpoint = <&ps8640_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dpi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
status = "okay";
|
|
ports {
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
hdmi0_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi_phy {
|
|
status = "okay";
|
|
mediatek,ibias = <0xc>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
rt5650: audio-codec@1a {
|
|
compatible = "realtek,rt5650";
|
|
reg = <0x1a>;
|
|
avdd-supply = <&mt6397_vgp1_reg>;
|
|
cpvdd-supply = <&mt6397_vcama_reg>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rt5650_irq>;
|
|
#sound-dai-cells = <1>;
|
|
realtek,dmic1-data-pin = <2>;
|
|
realtek,jd-mode = <2>;
|
|
};
|
|
|
|
ps8640: edp-bridge@8 {
|
|
compatible = "parade,ps8640";
|
|
reg = <0x8>;
|
|
powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
|
|
reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ps8640_pins>;
|
|
vdd12-supply = <&ps8640_fixed_1v2>;
|
|
vdd33-supply = <&mt6397_vgp2_reg>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
ps8640_in: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
ps8640_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
aux-bus {
|
|
panel: panel {
|
|
compatible = "lg,lp120up1";
|
|
power-supply = <&panel_fixed_3v3>;
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&ps8640_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <1500000>;
|
|
status = "okay";
|
|
|
|
da9211: da9211@68 {
|
|
compatible = "dlg,da9211";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
regulators {
|
|
da9211_vcpu_reg: BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1310000>;
|
|
regulator-min-microamp = <2000000>;
|
|
regulator-max-microamp = <4400000>;
|
|
regulator-ramp-delay = <10000>;
|
|
regulator-always-on;
|
|
regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
|
|
DA9211_BUCK_MODE_AUTO>;
|
|
};
|
|
|
|
da9211_vgpu_reg: BUCKB {
|
|
regulator-name = "VBUCKB";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1310000>;
|
|
regulator-min-microamp = <2000000>;
|
|
regulator-max-microamp = <3000000>;
|
|
regulator-ramp-delay = <10000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
tpm: tpm@20 {
|
|
compatible = "infineon,slb9645tt";
|
|
reg = <0x20>;
|
|
powered-while-suspended;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
touchscreen: touchscreen@10 {
|
|
compatible = "elan,ekth3500";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&trackpad_irq>;
|
|
|
|
trackpad: trackpad@15 {
|
|
compatible = "elan,ekth3000";
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <0x15>;
|
|
vcc-supply = <&mt6397_vgp6_reg>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&mipi_tx0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
cap-mmc-hw-reset;
|
|
hs400-ds-delay = <0x14015>;
|
|
mediatek,hs200-cmd-int-delay = <30>;
|
|
mediatek,hs400-cmd-int-delay = <14>;
|
|
mediatek,hs400-cmd-resp-sel-rising;
|
|
vmmc-supply = <&mt6397_vemc_3v3_reg>;
|
|
vqmmc-supply = <&mt6397_vio18_reg>;
|
|
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
|
|
non-removable;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
pinctrl-1 = <&mmc1_pins_uhs>;
|
|
bus-width = <4>;
|
|
max-frequency = <200000000>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
cd-gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&mt6397_vmch_reg>;
|
|
vqmmc-supply = <&mt6397_vmc_reg>;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc3_pins_default>;
|
|
pinctrl-1 = <&mmc3_pins_uhs>;
|
|
bus-width = <4>;
|
|
max-frequency = <200000000>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
cap-sdio-irq;
|
|
vmmc-supply = <&sdio_fixed_3v3>;
|
|
vqmmc-supply = <&mt6397_vgp3_reg>;
|
|
non-removable;
|
|
cap-power-off-card;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
btmrvl: btmrvl@2 {
|
|
compatible = "marvell,sd8897-bt";
|
|
reg = <2>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
|
|
marvell,wakeup-pin = /bits/ 16 <0x0d>;
|
|
marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
|
|
};
|
|
|
|
mwifiex: mwifiex@1 {
|
|
compatible = "marvell,sd8897";
|
|
reg = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
|
|
marvell,wakeup-pin = <3>;
|
|
};
|
|
};
|
|
|
|
&nor_flash {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nor_gpio1_pins>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
gpio-line-names = "EC_INT_1V8",
|
|
"SD_CD_L",
|
|
"ALC5514_IRQ",
|
|
"ALC5650_IRQ",
|
|
/*
|
|
* AP_FLASH_WP_L is crossystem ABI. Schematics
|
|
* call it SFWP_B.
|
|
*/
|
|
"AP_FLASH_WP_L",
|
|
"SFIN",
|
|
"SFCS0",
|
|
"SFHOLD",
|
|
"SFOUT",
|
|
"SFCK",
|
|
"WRAP_EVENT_S_EINT10",
|
|
"PMU_INT",
|
|
"I2S2_WS_ALC5650",
|
|
"I2S2_BCK_ALC5650",
|
|
"PWR_BTN_1V8",
|
|
"DA9212_IRQ",
|
|
"IDDIG",
|
|
"WATCHDOG",
|
|
"CEC",
|
|
"HDMISCK",
|
|
"HDMISD",
|
|
"HTPLG",
|
|
"MSDC3_DAT0",
|
|
"MSDC3_DAT1",
|
|
"MSDC3_DAT2",
|
|
"MSDC3_DAT3",
|
|
"MSDC3_CLK",
|
|
"MSDC3_CMD",
|
|
"USB_C0_OC_FLAGB",
|
|
"USBA_OC1_L",
|
|
"PS8640_1V2_ENABLE",
|
|
"THERM_ALERT_N",
|
|
"PANEL_LCD_POWER_EN",
|
|
"ANX7688_CHIP_PD_C",
|
|
"EC_IN_RW_1V8",
|
|
"ANX7688_1V_EN_C",
|
|
"USB_DP_HPD_C",
|
|
"TPM_DAVINT_N",
|
|
"MARVELL8897_IRQ",
|
|
"EN_USB_A0_PWR",
|
|
"USBA_A0_OC_L",
|
|
"EN_PP3300_DX_EDP",
|
|
"",
|
|
"SOC_I2C2_1V8_SDA_400K",
|
|
"SOC_I2C2_1V8_SCL_400K",
|
|
"SOC_I2C0_1V8_SDA_400K",
|
|
"SOC_I2C0_1V8_SCL_400K",
|
|
"EMMC_ID1",
|
|
"EMMC_ID0",
|
|
"MEM_CONFIG3",
|
|
"EMMC_ID2",
|
|
"MEM_CONFIG1",
|
|
"MEM_CONFIG2",
|
|
"BRD_ID2",
|
|
"MEM_CONFIG0",
|
|
"BRD_ID0",
|
|
"BRD_ID1",
|
|
"EMMC_DAT0",
|
|
"EMMC_DAT1",
|
|
"EMMC_DAT2",
|
|
"EMMC_DAT3",
|
|
"EMMC_DAT4",
|
|
"EMMC_DAT5",
|
|
"EMMC_DAT6",
|
|
"EMMC_DAT7",
|
|
"EMMC_CLK",
|
|
"EMMC_CMD",
|
|
"EMMC_RCLK",
|
|
"PLT_RST_L",
|
|
"LID_OPEN_1V8_L",
|
|
"AUDIO_SPI_MISO_R",
|
|
"",
|
|
"AC_OK_1V8",
|
|
"SD_DATA0",
|
|
"SD_DATA1",
|
|
"SD_DATA2",
|
|
"SD_DATA3",
|
|
"SD_CLK",
|
|
"SD_CMD",
|
|
"PWRAP_SPI0_MI",
|
|
"PWRAP_SPI0_MO",
|
|
"PWRAP_SPI0_CK",
|
|
"PWRAP_SPI0_CSN",
|
|
"",
|
|
"",
|
|
"WIFI_PDN",
|
|
"RTC32K_1V8",
|
|
"DISP_PWM0",
|
|
"TOUCHSCREEN_INT_L",
|
|
"",
|
|
"SRCLKENA0",
|
|
"SRCLKENA1",
|
|
"PS8640_MODE_CONF",
|
|
"TOUCHSCREEN_RESET_R",
|
|
"PLATFORM_PROCHOT_L",
|
|
"PANEL_POWER_EN",
|
|
"REC_MODE_L",
|
|
"EC_FW_UPDATE_L",
|
|
"ACCEL2_INT_L",
|
|
"HDMI_DP_INT",
|
|
"ACCELGYRO3_INT_L",
|
|
"ACCELGYRO4_INT_L",
|
|
"SPI_EC_CLK",
|
|
"SPI_EC_MI",
|
|
"SPI_EC_MO",
|
|
"SPI_EC_CSN",
|
|
"SOC_I2C3_1V8_SDA_400K",
|
|
"SOC_I2C3_1V8_SCL_400K",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"PS8640_SYSRSTN_1V8",
|
|
"APIN_MAX98090_DOUT2",
|
|
"TP_INT_1V8_L_R",
|
|
"RST_USB_HUB_R",
|
|
"BT_WAKE_L",
|
|
"ACCEL1_INT_L",
|
|
"TABLET_MODE_L",
|
|
"",
|
|
"V_UP_IN_L_R",
|
|
"V_DOWN_IN_L_R",
|
|
"SOC_I2C1_1V8_SDA_1M",
|
|
"SOC_I2C1_1V8_SCL_1M",
|
|
"PS8640_PDN_1V8",
|
|
"MAX98090_LRCLK",
|
|
"MAX98090_BCLK",
|
|
"MAX98090_MCLK",
|
|
"APOUT_MAX98090_DIN",
|
|
"APIN_MAX98090_DOUT",
|
|
"SOC_I2C4_1V8_SDA_400K",
|
|
"SOC_I2C4_1V8_SCL_400K";
|
|
|
|
aud_i2s2: aud_i2s2 {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
|
|
<MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
|
|
<MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
|
|
<MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
|
|
<MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
|
|
<MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
|
|
<MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
bl_fixed_pins: bl_fixed_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
bt_wake_pins: bt_wake_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
disp_pwm0_pins: disp_pwm0_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_keys_pins: gpio_keys_pins {
|
|
volume_pins {
|
|
pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>,
|
|
<MT8173_PIN_124_KPCOL2__FUNC_GPIO124>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
tablet_mode_pins {
|
|
pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
hdmi_mux_pins: hdmi_mux_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
|
|
};
|
|
};
|
|
|
|
i2c1_pins_a: i2c1 {
|
|
da9211_pins {
|
|
pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
|
|
<MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
|
|
<MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
|
|
<MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
|
|
<MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
|
|
<MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
|
|
<MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
|
|
<MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
|
|
<MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_default: mmc1default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
|
|
<MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
|
|
<MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
|
|
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
|
|
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
|
|
bias-pull-down;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
};
|
|
|
|
pins_insert {
|
|
pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc3_pins_default: mmc3default {
|
|
pins_dat {
|
|
pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
|
|
<MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
|
|
<MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
|
|
<MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_cmd {
|
|
pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
|
|
bias-pull-down;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0 {
|
|
pins_cmd_dat {
|
|
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
|
|
<MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
|
|
<MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
|
|
<MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
|
|
<MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
|
|
<MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
|
|
<MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
|
|
<MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
|
|
<MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_6mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
|
|
drive-strength = <MTK_DRIVE_6mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_ds {
|
|
pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>;
|
|
drive-strength = <MTK_DRIVE_10mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_uhs: mmc1 {
|
|
pins_cmd_dat {
|
|
pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
|
|
<MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
|
|
<MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
|
|
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
|
|
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_6mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
};
|
|
|
|
mmc3_pins_uhs: mmc3 {
|
|
pins_dat {
|
|
pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
|
|
<MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
|
|
<MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
|
|
<MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_cmd {
|
|
pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
};
|
|
|
|
nor_gpio1_pins: nor {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
|
|
<MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
|
|
<MT8173_PIN_8_EINT8__FUNC_SFIN>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins2 {
|
|
pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
panel_backlight_en_pins: panel_backlight_en_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_95_PCM_TX__FUNC_GPIO95>;
|
|
};
|
|
};
|
|
|
|
panel_fixed_pins: panel_fixed_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
|
|
};
|
|
};
|
|
|
|
ps8640_pins: ps8640_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>,
|
|
<MT8173_PIN_115_URTS0__FUNC_GPIO115>,
|
|
<MT8173_PIN_127_LCM_RST__FUNC_GPIO127>;
|
|
};
|
|
};
|
|
|
|
ps8640_fixed_pins: ps8640_fixed_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>;
|
|
};
|
|
};
|
|
|
|
rt5650_irq: rt5650_irq {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdio_fixed_3v3_pins: sdio_fixed_3v3_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
spi_pins_a: spi1 {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_spi {
|
|
pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>,
|
|
<MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>,
|
|
<MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>,
|
|
<MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
trackpad_irq: trackpad_irq {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
usb_pins: usb {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
|
|
output-high;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
wifi_wake_pins: wifi_wake_pins {
|
|
pins1 {
|
|
pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&disp_pwm0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwrap {
|
|
pmic: pmic {
|
|
compatible = "mediatek,mt6397";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
clock: mt6397clock {
|
|
compatible = "mediatek,mt6397-clk";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pio6397: pinctrl {
|
|
compatible = "mediatek,mt6397-pinctrl";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
regulator: mt6397regulator {
|
|
compatible = "mediatek,mt6397-regulator";
|
|
|
|
mt6397_vpca15_reg: buck_vpca15 {
|
|
regulator-compatible = "buck_vpca15";
|
|
regulator-name = "vpca15";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
regulator-allowed-modes = <0 1>;
|
|
};
|
|
|
|
mt6397_vpca7_reg: buck_vpca7 {
|
|
regulator-compatible = "buck_vpca7";
|
|
regulator-name = "vpca7";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <115>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vsramca15_reg: buck_vsramca15 {
|
|
regulator-compatible = "buck_vsramca15";
|
|
regulator-name = "vsramca15";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vsramca7_reg: buck_vsramca7 {
|
|
regulator-compatible = "buck_vsramca7";
|
|
regulator-name = "vsramca7";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vcore_reg: buck_vcore {
|
|
regulator-compatible = "buck_vcore";
|
|
regulator-name = "vcore";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vgpu_reg: buck_vgpu {
|
|
regulator-compatible = "buck_vgpu";
|
|
regulator-name = "vgpu";
|
|
regulator-min-microvolt = < 700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <115>;
|
|
};
|
|
|
|
mt6397_vdrm_reg: buck_vdrm {
|
|
regulator-compatible = "buck_vdrm";
|
|
regulator-name = "vdrm";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vio18_reg: buck_vio18 {
|
|
regulator-compatible = "buck_vio18";
|
|
regulator-name = "vio18";
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <1980000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vtcxo_reg: ldo_vtcxo {
|
|
regulator-compatible = "ldo_vtcxo";
|
|
regulator-name = "vtcxo";
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_va28_reg: ldo_va28 {
|
|
regulator-compatible = "ldo_va28";
|
|
regulator-name = "va28";
|
|
};
|
|
|
|
mt6397_vcama_reg: ldo_vcama {
|
|
regulator-compatible = "ldo_vcama";
|
|
regulator-name = "vcama";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vio28_reg: ldo_vio28 {
|
|
regulator-compatible = "ldo_vio28";
|
|
regulator-name = "vio28";
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vusb_reg: ldo_vusb {
|
|
regulator-compatible = "ldo_vusb";
|
|
regulator-name = "vusb";
|
|
};
|
|
|
|
mt6397_vmc_reg: ldo_vmc {
|
|
regulator-compatible = "ldo_vmc";
|
|
regulator-name = "vmc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vmch_reg: ldo_vmch {
|
|
regulator-compatible = "ldo_vmch";
|
|
regulator-name = "vmch";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vemc_3v3_reg: ldo_vemc3v3 {
|
|
regulator-compatible = "ldo_vemc3v3";
|
|
regulator-name = "vemc_3v3";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vgp1_reg: ldo_vgp1 {
|
|
regulator-compatible = "ldo_vgp1";
|
|
regulator-name = "vcamd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
};
|
|
|
|
mt6397_vgp2_reg: ldo_vgp2 {
|
|
regulator-compatible = "ldo_vgp2";
|
|
regulator-name = "vcamio";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vgp3_reg: ldo_vgp3 {
|
|
regulator-compatible = "ldo_vgp3";
|
|
regulator-name = "vcamaf";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vgp4_reg: ldo_vgp4 {
|
|
regulator-compatible = "ldo_vgp4";
|
|
regulator-name = "vgp4";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vgp5_reg: ldo_vgp5 {
|
|
regulator-compatible = "ldo_vgp5";
|
|
regulator-name = "vgp5";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
|
|
mt6397_vgp6_reg: ldo_vgp6 {
|
|
regulator-compatible = "ldo_vgp6";
|
|
regulator-name = "vgp6";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6397_vibr_reg: ldo_vibr {
|
|
regulator-compatible = "ldo_vibr";
|
|
regulator-name = "vibr";
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <218>;
|
|
};
|
|
};
|
|
|
|
rtc: mt6397rtc {
|
|
compatible = "mediatek,mt6397-rtc";
|
|
};
|
|
|
|
syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
|
|
compatible = "mediatek,mt6397-pctl-pmic-syscfg",
|
|
"syscon";
|
|
reg = <0 0x0000c000 0 0x0108>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_pins_a>;
|
|
mediatek,pad-select = <1>;
|
|
status = "okay";
|
|
/* clients */
|
|
cros_ec: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <12000000>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
google,cros-ec-spi-msg-delay = <500>;
|
|
|
|
i2c_tunnel: i2c-tunnel0 {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
google,remote-bus = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
battery: sbs-battery@b {
|
|
compatible = "sbs,sbs-battery";
|
|
reg = <0xb>;
|
|
sbs,i2c-retry-count = <2>;
|
|
sbs,poll-retry-count = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssusb {
|
|
dr_mode = "host";
|
|
wakeup-source;
|
|
vusb33-supply = <&mt6397_vusb_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&thermal {
|
|
bank0-supply = <&mt6397_vpca15_reg>;
|
|
bank1-supply = <&da9211_vcpu_reg>;
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_pins>;
|
|
vusb33-supply = <&mt6397_vusb_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
#include <arm/cros-ec-keyboard.dtsi>
|