391 lines
6.7 KiB
Plaintext
391 lines
6.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018, Linaro Limited
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "qcs404.dtsi"
|
|
#include "pms405.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
serial1 = &blsp1_uart3;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_ch0_3p3:
|
|
vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "eSMPS3_3P3";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
usb3_vbus_reg: regulator-usb3-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBUS_BOOST_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_vbus_boost_pin>;
|
|
vin-supply = <&vph_pwr>;
|
|
enable-active-high;
|
|
|
|
/* TODO: Drop this when introducing role switching */
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&blsp1_uart3 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
vddio-supply = <&vreg_l6_1p8>;
|
|
vddxo-supply = <&vreg_l5_1p8>;
|
|
vddrf-supply = <&vreg_l1_1p3>;
|
|
vddch0-supply = <&vdd_ch0_3p3>;
|
|
|
|
local-bd-address = [ 02 00 00 00 5a ad ];
|
|
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&blsp1_dma {
|
|
qcom,controlled-remotely;
|
|
};
|
|
|
|
&blsp2_dma {
|
|
qcom,controlled-remotely;
|
|
};
|
|
|
|
&gcc {
|
|
protected-clocks = <GCC_BIMC_CDSP_CLK>,
|
|
<GCC_CDSP_CFG_AHB_CLK>,
|
|
<GCC_CDSP_BIMC_CLK_SRC>,
|
|
<GCC_CDSP_TBU_CLK>,
|
|
<141>, /* GCC_WCSS_Q6_AHB_CLK */
|
|
<142>; /* GCC_WCSS_Q6_AXIM_CLK */
|
|
};
|
|
|
|
&pms405_spmi_regulators {
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
|
|
pms405_s3: s3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd_apc";
|
|
regulator-initial-mode = <1>;
|
|
regulator-min-microvolt = <1048000>;
|
|
regulator-max-microvolt = <1384000>;
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
|
|
perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&perst_state>;
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
|
|
vdda-vp-supply = <&vreg_l3_1p05>;
|
|
vdda-vph-supply = <&vreg_l5_1p8>;
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_cdsp {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_wcss {
|
|
status = "okay";
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators {
|
|
compatible = "qcom,rpm-pms405-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
vdd_s2-supply = <&vph_pwr>;
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
vdd_s4-supply = <&vph_pwr>;
|
|
vdd_s5-supply = <&vph_pwr>;
|
|
vdd_l1_l2-supply = <&vreg_s5_1p35>;
|
|
vdd_l3_l8-supply = <&vreg_s5_1p35>;
|
|
vdd_l4-supply = <&vreg_s5_1p35>;
|
|
vdd_l5_l6-supply = <&vreg_s4_1p8>;
|
|
vdd_l7-supply = <&vph_pwr>;
|
|
vdd_l9-supply = <&vreg_s5_1p35>;
|
|
vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
|
|
|
|
vreg_s4_1p8: s4 {
|
|
regulator-min-microvolt = <1728000>;
|
|
regulator-max-microvolt = <1920000>;
|
|
};
|
|
|
|
vreg_s5_1p35: s5 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_l1_1p3: l1 {
|
|
regulator-min-microvolt = <1240000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_l2_1p275: l2 {
|
|
regulator-min-microvolt = <1048000>;
|
|
regulator-max-microvolt = <1280000>;
|
|
};
|
|
|
|
vreg_l3_1p05: l3 {
|
|
regulator-min-microvolt = <1048000>;
|
|
regulator-max-microvolt = <1160000>;
|
|
};
|
|
|
|
vreg_l4_1p2: l4 {
|
|
regulator-min-microvolt = <1144000>;
|
|
regulator-max-microvolt = <1256000>;
|
|
};
|
|
|
|
vreg_l5_1p8: l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l6_1p8: l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l7_1p8: l7 {
|
|
regulator-min-microvolt = <1616000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vreg_l8_1p2: l8 {
|
|
regulator-min-microvolt = <1136000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_l10_3p3: l10 {
|
|
regulator-min-microvolt = <2936000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
};
|
|
|
|
vreg_l11_sdc2: l11 {
|
|
regulator-min-microvolt = <2696000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
};
|
|
|
|
vreg_l12_3p3: l12 {
|
|
regulator-min-microvolt = <3050000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vreg_l13_3p3: l13 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdcc1 {
|
|
status = "okay";
|
|
|
|
supports-cqe;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs400-1_8v;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
};
|
|
|
|
&tlmm {
|
|
perst_state: perst-state {
|
|
pins = "gpio43";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
sdc1_on: sdc1-on-state {
|
|
clk-pins {
|
|
pins = "sdc1_clk";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc1_data";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
rclk-pins {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdc1_off: sdc1-off-state {
|
|
clk-pins {
|
|
pins = "sdc1_clk";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc1_data";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
rclk-pins {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
usb3_id_pin: usb3-id-state {
|
|
pins = "gpio116";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
&pms405_gpios {
|
|
usb_vbus_boost_pin: usb-vbus-boost-state {
|
|
pinconf {
|
|
pins = "gpio3";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
output-low;
|
|
power-source = <1>;
|
|
};
|
|
};
|
|
usb3_vbus_pin: usb3-vbus-state {
|
|
pinconf {
|
|
pins = "gpio12";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
input-enable;
|
|
bias-pull-down;
|
|
power-source = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy_sec {
|
|
vdd-supply = <&vreg_l4_1p2>;
|
|
vdda1p8-supply = <&vreg_l5_1p8>;
|
|
vdda3p3-supply = <&vreg_l12_3p3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usb2_phy_prim {
|
|
vdd-supply = <&vreg_l4_1p2>;
|
|
vdda1p8-supply = <&vreg_l5_1p8>;
|
|
vdda3p3-supply = <&vreg_l12_3p3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_phy {
|
|
vdd-supply = <&vreg_l3_1p05>;
|
|
vdda1p8-supply = <&vreg_l5_1p8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
|
|
vdd-1.8-xo-supply = <&vreg_l5_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l1_1p3>;
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in qcs404.dtsi */
|
|
|
|
&blsp1_uart2_default {
|
|
rx-pins {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
tx-pins {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&blsp1_uart3_default {
|
|
cts-pins {
|
|
bias-disable;
|
|
};
|
|
|
|
rts-tx-pins {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
rx-pins {
|
|
bias-pull-up;
|
|
};
|
|
};
|