830 lines
16 KiB
Plaintext
830 lines
16 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
|
|
*
|
|
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include <dt-bindings/sound/qcom,q6afe.h>
|
|
#include <dt-bindings/sound/qcom,q6asm.h>
|
|
|
|
#include "sdm845.dtsi"
|
|
#include "sdm845-wcd9340.dtsi"
|
|
#include "pm8998.dtsi"
|
|
#include "pmi8998.dtsi"
|
|
|
|
/delete-node/ &rmtfs_mem;
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart9;
|
|
serial1 = &uart6;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
label = "Volume keys";
|
|
autorepeat;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
|
|
|
|
key-vol-down {
|
|
label = "Volume down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
key-vol-up {
|
|
label = "Volume up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
/*
|
|
* The rmtfs_mem needs to be guarded due to "XPU limitations"
|
|
* it is otherwise possible for an allocation adjacent to the
|
|
* rmtfs_mem region to trigger an XPU violation, causing a crash.
|
|
*/
|
|
rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
|
|
no-map;
|
|
reg = <0 0xf5b00000 0 0x1000>;
|
|
};
|
|
/*
|
|
* The rmtfs memory region in downstream is 'dynamically allocated'
|
|
* but given the same address every time. Hard code it as this address is
|
|
* where the modem firmware expects it to be.
|
|
*/
|
|
rmtfs_mem: rmtfs-mem@f5b01000 {
|
|
compatible = "qcom,rmtfs-mem";
|
|
reg = <0 0xf5b01000 0 0x200000>;
|
|
no-map;
|
|
|
|
qcom,client-id = <1>;
|
|
qcom,vmid = <15>;
|
|
};
|
|
rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
|
|
no-map;
|
|
reg = <0 0xf5d01000 0 0x1000>;
|
|
};
|
|
|
|
/*
|
|
* It seems like reserving the old rmtfs_mem region is also needed to prevent
|
|
* random crashes which are most likely modem related, more testing needed.
|
|
*/
|
|
removed_region: removed-region@88f00000 {
|
|
no-map;
|
|
reg = <0 0x88f00000 0 0x1c00000>;
|
|
};
|
|
|
|
ramoops: ramoops@ac300000 {
|
|
compatible = "ramoops";
|
|
reg = <0 0xac300000 0 0x400000>;
|
|
record-size = <0x40000>;
|
|
console-size = <0x40000>;
|
|
ftrace-size = <0x40000>;
|
|
pmsg-size = <0x200000>;
|
|
ecc-size = <16>;
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
};
|
|
|
|
/*
|
|
* Apparently RPMh does not provide support for PM8998 S4 because it
|
|
* is always-on; model it as a fixed regulator.
|
|
*/
|
|
vreg_s4a_1p8: pm8998-smps4 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_s4a_1p8";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
};
|
|
|
|
/*
|
|
* The touchscreen regulator seems to be controlled somehow by a gpio.
|
|
* Model it as a fixed regulator and keep it on. Without schematics we
|
|
* don't know how this is actually wired up...
|
|
*/
|
|
ts_1p8_supply: ts-1p8-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ts_1p8_supply";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
gpio = <&tlmm 88 0>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&adsp_pas {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm8998-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
vdd-s11-supply = <&vph_pwr>;
|
|
vdd-s12-supply = <&vph_pwr>;
|
|
vdd-s13-supply = <&vph_pwr>;
|
|
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
|
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
|
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
|
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
|
vdd-l6-supply = <&vph_pwr>;
|
|
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
|
vdd-l9-supply = <&vreg_bob>;
|
|
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
|
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
|
vdd-l16-l28-supply = <&vreg_bob>;
|
|
vdd-l18-l22-supply = <&vreg_bob>;
|
|
vdd-l20-l24-supply = <&vreg_bob>;
|
|
vdd-l26-supply = <&vreg_s3a_1p35>;
|
|
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s3a_1p35: smps3 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_s5a_2p04: smps5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
vreg_s7a_1p025: smps7 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1028000>;
|
|
};
|
|
|
|
vdda_mipi_dsi0_pll:
|
|
vdda_qlink_lv:
|
|
vdda_ufs1_core:
|
|
vdda_usb1_ss_core:
|
|
vreg_l1a_0p875: ldo1 {
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2a_1p2: ldo2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l5a_0p8: ldo5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7a_1p8: ldo7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_qusb_hs0_1p8:
|
|
vreg_l12a_1p8: ldo12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l14a_1p88: ldo14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l17a_1p3: ldo17 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l20a_2p95: ldo20 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l23a_3p3: ldo23 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_qusb_hs0_3p1:
|
|
vreg_l24a_3p075: ldo24 {
|
|
regulator-min-microvolt = <3088000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l25a_3p3: ldo25 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_mipi_dsi0_1p2:
|
|
vdda_ufs1_1p2:
|
|
vreg_l26a_1p2: ldo26 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l28a_3p0: ldo28 {
|
|
regulator-min-microvolt = <2856000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pmi8998-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
vdd-bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-bypass;
|
|
};
|
|
};
|
|
|
|
regulators-2 {
|
|
compatible = "qcom,pm8005-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
|
|
vreg_s3c_0p6: smps3 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cdsp_pas {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
vdda-supply = <&vdda_mipi_dsi0_1p2>;
|
|
|
|
/*
|
|
* Both devices use different panels but all other properties
|
|
* are common. Compatible line is declared in device dts.
|
|
*/
|
|
display_panel: panel@0 {
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
vddio-supply = <&vreg_l14a_1p88>;
|
|
|
|
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi0_out {
|
|
remote-endpoint = <&panel_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&dsi0_phy {
|
|
status = "okay";
|
|
vdds-supply = <&vdda_mipi_dsi0_pll>;
|
|
};
|
|
|
|
&gcc {
|
|
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
|
<GCC_QSPI_CORE_CLK_SRC>,
|
|
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
|
<GCC_LPASS_Q6_AXI_CLK>,
|
|
<GCC_LPASS_SWAY_CLK>;
|
|
};
|
|
|
|
&gmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
|
|
zap-shader {
|
|
memory-region = <&gpu_mem>;
|
|
firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
|
|
};
|
|
};
|
|
|
|
&i2c10 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
bq27441_fg: bq27441-battery@55 {
|
|
compatible = "ti,bq27411";
|
|
status = "okay";
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
&i2c12 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
synaptics-rmi4-i2c@20 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_default_pins>;
|
|
|
|
vdd-supply = <&vreg_l28a_3p0>;
|
|
vio-supply = <&ts_1p8_supply>;
|
|
|
|
syna,reset-delay-ms = <200>;
|
|
syna,startup-delay-ms = <200>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x01>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4_f12: rmi4-f12@12 {
|
|
reg = <0x12>;
|
|
touchscreen-x-mm = <68>;
|
|
touchscreen-y-mm = <144>;
|
|
syna,sensor-type = <1>;
|
|
syna,rezero-wait-ms = <200>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ipa {
|
|
qcom,gsi-loader = "self";
|
|
memory-region = <&ipa_fw_mem>;
|
|
firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Modem/wifi */
|
|
&mss_pil {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
|
|
};
|
|
|
|
&pm8998_gpios {
|
|
volume_down_gpio: pm8998-gpio5-state {
|
|
pinconf {
|
|
pins = "gpio5";
|
|
function = "normal";
|
|
input-enable;
|
|
bias-pull-up;
|
|
qcom,drive-strength = <0>;
|
|
};
|
|
};
|
|
|
|
volume_up_gpio: pm8998-gpio6-state {
|
|
pinconf {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
input-enable;
|
|
bias-pull-up;
|
|
qcom,drive-strength = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmi8998_rradc {
|
|
status = "okay";
|
|
};
|
|
|
|
&q6afedai {
|
|
qi2s@22 {
|
|
reg = <22>;
|
|
qcom,sd-lines = <1>;
|
|
};
|
|
|
|
qi2s@23 {
|
|
reg = <23>;
|
|
qcom,sd-lines = <0>;
|
|
};
|
|
};
|
|
|
|
&q6asmdai {
|
|
dai@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
dai@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
dai@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
dai@3 {
|
|
reg = <3>;
|
|
};
|
|
|
|
dai@4 {
|
|
reg = <4>;
|
|
};
|
|
|
|
dai@5 {
|
|
reg = <5>;
|
|
};
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qup_i2c10_default {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qup_i2c12_default {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qup_uart9_rx {
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
&qup_uart9_tx {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&sound {
|
|
compatible = "qcom,sdm845-sndcard";
|
|
pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
mm1-dai-link {
|
|
link-name = "MultiMedia1";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
|
};
|
|
};
|
|
|
|
mm2-dai-link {
|
|
link-name = "MultiMedia2";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
|
};
|
|
};
|
|
|
|
mm3-dai-link {
|
|
link-name = "MultiMedia3";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
|
};
|
|
};
|
|
|
|
mm4-dai-link {
|
|
link-name = "MultiMedia4";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
|
|
};
|
|
};
|
|
|
|
mm5-dai-link {
|
|
link-name = "MultiMedia5";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
|
|
};
|
|
};
|
|
|
|
mm6-dai-link {
|
|
link-name = "MultiMedia6";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
|
|
};
|
|
};
|
|
|
|
speaker_playback_dai: speaker-dai-link {
|
|
link-name = "Speaker Playback";
|
|
cpu {
|
|
sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
};
|
|
|
|
slim-dai-link {
|
|
link-name = "SLIM Playback 1";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_0_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 0>;
|
|
};
|
|
};
|
|
|
|
slimcap-dai-link {
|
|
link-name = "SLIM Capture 1";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_0_TX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 1>;
|
|
};
|
|
};
|
|
|
|
slim2-dai-link {
|
|
link-name = "SLIM Playback 2";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_1_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 2>; /* AIF2_PB */
|
|
};
|
|
};
|
|
|
|
slimcap2-dai-link {
|
|
link-name = "SLIM Capture 2";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_1_TX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 3>; /* AIF2_CAP */
|
|
};
|
|
};
|
|
|
|
slimcap3-dai-link {
|
|
link-name = "SLIM Capture 3";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_2_TX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 5>; /* AIF3_CAP */
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart6 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&qup_uart6_4pin>;
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
/*
|
|
* This path is relative to the qca/
|
|
* subdir under lib/firmware.
|
|
*/
|
|
firmware-name = "oneplus6/crnv21.bin";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&uart9 {
|
|
label = "LS-UART1";
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
status = "okay";
|
|
|
|
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
|
vcc-max-microamp = <600000>;
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vdda_ufs1_core>;
|
|
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
|
|
/*
|
|
* disable USB3 clock requirement as the device only supports
|
|
* USB2.
|
|
*/
|
|
qcom,select-utmi-as-pipe-clk;
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
/*
|
|
* We don't have the capability to switch modes yet.
|
|
*/
|
|
dr_mode = "peripheral";
|
|
|
|
/* fastest mode for USB 2 */
|
|
maximum-speed = "high-speed";
|
|
|
|
/* Remove USB3 phy as it's unused on this device. */
|
|
phys = <&usb_1_hsphy>;
|
|
phy-names = "usb2-phy";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vdda_usb1_ss_core>;
|
|
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
|
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
|
|
|
qcom,imp-res-offset-value = <8>;
|
|
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
|
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
|
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
|
|
|
tri_state_key_default: tri-state-key-default-state {
|
|
pins = "gpio40", "gpio42", "gpio26";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_default_pins: ts-int-state {
|
|
pins = "gpio99", "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
panel_reset_pins: panel-reset-state {
|
|
pins = "gpio6", "gpio25", "gpio26";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
panel_te_pin: panel-te-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
panel_esd_pin: panel-esd-state {
|
|
pins = "gpio30";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
input-enable;
|
|
};
|
|
|
|
speaker_default: speaker-default-state {
|
|
mux {
|
|
pins = "gpio69";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&venus {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
|
|
};
|
|
|
|
&wcd9340 {
|
|
pinctrl-0 = <&wcd_intr_default>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
|
|
vdd-buck-supply = <&vreg_s4a_1p8>;
|
|
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
|
vdd-tx-supply = <&vreg_s4a_1p8>;
|
|
vdd-rx-supply = <&vreg_s4a_1p8>;
|
|
vdd-io-supply = <&vreg_s4a_1p8>;
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
|
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
|
|
|
qcom,snoc-host-cap-8bit-quirk;
|
|
};
|