718 lines
15 KiB
Plaintext
718 lines
15 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
|
|
* Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
|
|
* Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "sdm845.dtsi"
|
|
#include "pm8998.dtsi"
|
|
#include "pmi8998.dtsi"
|
|
|
|
/ {
|
|
model = "SHIFT SHIFT6mq";
|
|
compatible = "shift,axolotl", "qcom,sdm845";
|
|
qcom,msm-id = <321 0x20001>;
|
|
qcom,board-id = <11 0>;
|
|
|
|
aliases {
|
|
display0 = &framebuffer0;
|
|
serial0 = &uart9;
|
|
serial1 = &uart6;
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
stdout-path = "serial0";
|
|
|
|
/* Use framebuffer setup by the bootloader. */
|
|
framebuffer0: framebuffer@9d400000 {
|
|
compatible = "simple-framebuffer";
|
|
reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
|
|
width = <1080>;
|
|
height = <2160>;
|
|
stride = <(1080 * 4)>;
|
|
format = "a8r8g8b8";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&volume_up_gpio>;
|
|
|
|
key-vol-up {
|
|
label = "volume_up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
framebuffer_region@9d400000 {
|
|
reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
|
|
no-map;
|
|
};
|
|
|
|
ramoops: ramoops@b0000000 {
|
|
compatible = "ramoops";
|
|
reg = <0 0xb0000000 0 0x00400000>;
|
|
record-size = <0x40000>;
|
|
console-size = <0x40000>;
|
|
ftrace-size = <0x40000>;
|
|
pmsg-size = <0x200000>;
|
|
ecc-size = <0x0>;
|
|
};
|
|
};
|
|
|
|
battery: battery {
|
|
compatible = "simple-battery";
|
|
|
|
charge-full-design-microamp-hours = <3850000>;
|
|
voltage-min-design-microvolt = <3600000>;
|
|
voltage-max-design-microvolt = <4400000>;
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
};
|
|
|
|
vreg_s4a_1p8: pm8998-smps4 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_s4a_1p8";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
};
|
|
};
|
|
|
|
&adsp_pas {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm8998-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
vdd-s11-supply = <&vph_pwr>;
|
|
vdd-s12-supply = <&vph_pwr>;
|
|
vdd-s13-supply = <&vph_pwr>;
|
|
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
|
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
|
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
|
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
|
vdd-l6-supply = <&vph_pwr>;
|
|
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
|
vdd-l9-supply = <&vreg_bob>;
|
|
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
|
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
|
vdd-l16-l28-supply = <&vreg_bob>;
|
|
vdd-l18-l22-supply = <&vreg_bob>;
|
|
vdd-l20-l24-supply = <&vreg_bob>;
|
|
vdd-l26-supply = <&vreg_s3a_1p35>;
|
|
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s2a_1p125: smps2 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
vreg_s3a_1p35: smps3 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_s5a_2p04: smps5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
vreg_s7a_1p025: smps7 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1028000>;
|
|
};
|
|
|
|
vdd_qusb_hs0:
|
|
vdda_hp_pcie_core:
|
|
vdda_mipi_csi0_0p9:
|
|
vdda_mipi_csi1_0p9:
|
|
vdda_mipi_csi2_0p9:
|
|
vdda_mipi_dsi0_pll:
|
|
vdda_mipi_dsi1_pll:
|
|
vdda_qlink_lv:
|
|
vdda_qlink_lv_ck:
|
|
vdda_qrefs_0p875:
|
|
vdda_pcie_core:
|
|
vdda_pll_cc_ebi01:
|
|
vdda_pll_cc_ebi23:
|
|
vdda_sp_sensor:
|
|
vdda_ufs1_core:
|
|
vdda_ufs2_core:
|
|
vdda_usb1_ss_core:
|
|
vdda_usb2_ss_core:
|
|
vreg_l1a_0p875: ldo1 {
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vddpx_10:
|
|
vreg_l2a_1p2: ldo2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l3a_1p0: ldo3 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd_wcss_cx:
|
|
vdd_wcss_mx:
|
|
vdda_wcss_pll:
|
|
vreg_l5a_0p8: ldo5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vddpx_13:
|
|
vreg_l6a_1p8: ldo6 {
|
|
regulator-min-microvolt = <1856000>;
|
|
regulator-max-microvolt = <1856000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7a_1p8: ldo7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l8a_1p2: ldo8 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1248000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9a_1p8: ldo9 {
|
|
regulator-min-microvolt = <1704000>;
|
|
regulator-max-microvolt = <2928000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10a_1p8: ldo10 {
|
|
regulator-min-microvolt = <1704000>;
|
|
regulator-max-microvolt = <2928000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11a_1p0: ldo11 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1048000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd_qfprom:
|
|
vdd_qfprom_sp:
|
|
vdda_apc1_cs_1p8:
|
|
vdda_gfx_cs_1p8:
|
|
vdda_qrefs_1p8:
|
|
vdda_qusb_hs0_1p8:
|
|
vddpx_11:
|
|
vreg_l12a_1p8: ldo12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vddpx_2:
|
|
vreg_l13a_2p95: ldo13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l14a_1p88: ldo14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l15a_1p8: ldo15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l16a_2p7: ldo16 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2704000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l17a_1p3: ldo17 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l18a_2p7: ldo18 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l19a_3p0: ldo19 {
|
|
regulator-min-microvolt = <2856000>;
|
|
regulator-max-microvolt = <3104000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l20a_2p95: ldo20 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l21a_2p95: ldo21 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l22a_2p85: ldo22 {
|
|
regulator-min-microvolt = <2864000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l23a_3p3: ldo23 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_qusb_hs0_3p1:
|
|
vreg_l24a_3p075: ldo24 {
|
|
regulator-min-microvolt = <3088000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l25a_3p3: ldo25 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_hp_pcie_1p2:
|
|
vdda_hv_ebi0:
|
|
vdda_hv_ebi1:
|
|
vdda_hv_ebi2:
|
|
vdda_hv_ebi3:
|
|
vdda_mipi_csi_1p25:
|
|
vdda_mipi_dsi0_1p2:
|
|
vdda_mipi_dsi1_1p2:
|
|
vdda_pcie_1p2:
|
|
vdda_ufs1_1p2:
|
|
vdda_ufs2_1p2:
|
|
vdda_usb1_ss_1p2:
|
|
vdda_usb2_ss_1p2:
|
|
vreg_l26a_1p2: ldo26 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l28a_3p0: ldo28 {
|
|
regulator-min-microvolt = <2856000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_lvs1a_1p8: lvs1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_lvs2a_1p8: lvs2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pmi8998-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
vdd-bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-bypass;
|
|
};
|
|
};
|
|
|
|
regulators-2 {
|
|
compatible = "qcom,pm8005-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
|
|
vreg_s3c_0p6: smps3 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cdsp_pas {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
vdda-supply = <&vdda_mipi_dsi0_1p2>;
|
|
|
|
panel@0 {
|
|
compatible = "visionox,rm69299-shift";
|
|
status = "okay";
|
|
reg = <0>;
|
|
vdda-supply = <&vreg_l14a_1p88>;
|
|
vdd3p3-supply = <&vreg_l28a_3p0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sde_dsi_active &sde_te_active>;
|
|
pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
|
|
|
|
port {
|
|
panel_in_0: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi0_out {
|
|
remote-endpoint = <&panel_in_0>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&dsi0_phy {
|
|
status = "okay";
|
|
vdds-supply = <&vdda_mipi_dsi0_pll>;
|
|
};
|
|
|
|
&gcc {
|
|
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
|
<GCC_QSPI_CORE_CLK_SRC>,
|
|
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
|
<GCC_LPASS_Q6_AXI_CLK>,
|
|
<GCC_LPASS_SWAY_CLK>;
|
|
};
|
|
|
|
&gmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
|
|
zap-shader {
|
|
memory-region = <&gpu_mem>;
|
|
firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
touchscreen@38 {
|
|
compatible = "focaltech,fts8719";
|
|
reg = <0x38>;
|
|
wakeup-source;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <125 0x2>;
|
|
vdd-supply = <&vreg_l28a_3p0>;
|
|
vcc-i2c-supply = <&vreg_l14a_1p88>;
|
|
|
|
pinctrl-names = "default", "suspend";
|
|
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
|
|
reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
|
|
irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
|
|
touchscreen-size-x = <1080>;
|
|
touchscreen-size-y = <2160>;
|
|
focaltech,max-touch-number = <5>;
|
|
};
|
|
};
|
|
|
|
&ipa {
|
|
qcom,gsi-loader = "self";
|
|
memory-region = <&ipa_fw_mem>;
|
|
firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mss_pil {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
|
|
};
|
|
|
|
&pm8998_gpios {
|
|
volume_up_gpio: pm8998-gpio6-state {
|
|
pinconf {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
input-enable;
|
|
bias-pull-up;
|
|
qcom,drive-strength = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8998_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pmi8998_lpg {
|
|
status = "okay";
|
|
|
|
multi-led {
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
|
|
led@4 {
|
|
reg = <4>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@5 {
|
|
reg = <5>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qup_uart9_rx {
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
&qup_uart9_tx {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
|
|
|
sde_dsi_active: sde-dsi-active-state {
|
|
pins = "gpio6", "gpio11";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
sde_dsi_suspend: sde-dsi-suspend-state {
|
|
pins = "gpio6", "gpio11";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sde_te_active: sde-te-active-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sde_te_suspend: sde-te-suspend-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
ts_int_active: ts-int-active-state {
|
|
pins = "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
|
|
ts_int_suspend: ts-int-suspend-state {
|
|
pins = "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
input-enable;
|
|
};
|
|
|
|
ts_reset_active: ts-reset-active-state {
|
|
pins = "gpio99";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
ts_reset_suspend: ts-reset-suspend-state {
|
|
pins = "gpio99";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&uart6 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&qup_uart6_4pin>;
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
/*
|
|
* This path is relative to the qca/
|
|
* subdir under lib/firmware.
|
|
*/
|
|
firmware-name = "axolotl/crnv21.bin";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&uart9 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
status = "okay";
|
|
|
|
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
|
vcc-max-microamp = <600000>;
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vdda_ufs1_core>;
|
|
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vreg_l1a_0p875>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l26a_1p2>;
|
|
vdda-pll-supply = <&vreg_l1a_0p875>;
|
|
};
|
|
|
|
&venus {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/axolotl/venus.mbn";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
|
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
|
|
|
qcom,snoc-host-cap-8bit-quirk;
|
|
};
|