749 lines
14 KiB
Plaintext
749 lines
14 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2020-2021, Linaro Limited
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "sm8350.dtsi"
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. SM8350 HDK";
|
|
compatible = "qcom,sm8350-hdk", "qcom,sm8350";
|
|
|
|
aliases {
|
|
serial0 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con: endpoint {
|
|
remote-endpoint = <<9611_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lt9611_1v2: lt9611-1v2-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LT9611_1V2";
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lt9611_3v3: lt9611-3v3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LT9611_3V3";
|
|
|
|
vin-supply = <&vreg_bob>;
|
|
gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&adsp {
|
|
status = "okay";
|
|
firmware-name = "qcom/sm8350/adsp.mbn";
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm8350-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
vdd-s11-supply = <&vph_pwr>;
|
|
vdd-s12-supply = <&vph_pwr>;
|
|
|
|
vdd-l1-l4-supply = <&vreg_s11b_0p95>;
|
|
vdd-l2-l7-supply = <&vreg_bob>;
|
|
vdd-l3-l5-supply = <&vreg_bob>;
|
|
vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
|
|
|
|
vreg_s10b_1p8: smps10 {
|
|
regulator-name = "vreg_s10b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s11b_0p95: smps11 {
|
|
regulator-name = "vreg_s11b_0p95";
|
|
regulator-min-microvolt = <952000>;
|
|
regulator-max-microvolt = <952000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s12b_1p25: smps12 {
|
|
regulator-name = "vreg_s12b_1p25";
|
|
regulator-min-microvolt = <1256000>;
|
|
regulator-max-microvolt = <1256000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1b_0p88: ldo1 {
|
|
regulator-name = "vreg_l1b_0p88";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2b_3p07: ldo2 {
|
|
regulator-name = "vreg_l2b_3p07";
|
|
regulator-min-microvolt = <3072000>;
|
|
regulator-max-microvolt = <3072000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3b_0p9: ldo3 {
|
|
regulator-name = "vreg_l3b_0p9";
|
|
regulator-min-microvolt = <904000>;
|
|
regulator-max-microvolt = <904000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5b_0p88: ldo5 {
|
|
regulator-name = "vreg_l5b_0p88";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <888000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6b_1p2: ldo6 {
|
|
regulator-name = "vreg_l6b_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1208000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7b_2p96: ldo7 {
|
|
regulator-name = "vreg_l7b_2p96";
|
|
regulator-min-microvolt = <2504000>;
|
|
regulator-max-microvolt = <2504000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9b_1p2: ldo9 {
|
|
regulator-name = "vreg_l9b_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pm8350c-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
|
|
vdd-l1-l12-supply = <&vreg_s1c_1p86>;
|
|
vdd-l2-l8-supply = <&vreg_s1c_1p86>;
|
|
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
|
|
vdd-l6-l9-l11-supply = <&vreg_bob>;
|
|
vdd-l10-supply = <&vreg_s12b_1p25>;
|
|
|
|
vdd-bob-supply = <&vph_pwr>;
|
|
|
|
vreg_s1c_1p86: smps1 {
|
|
regulator-name = "vreg_s1c_1p86";
|
|
regulator-min-microvolt = <1856000>;
|
|
regulator-max-microvolt = <1880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_bob: bob {
|
|
regulator-name = "vreg_bob";
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l1c_1p8: ldo1 {
|
|
regulator-name = "vreg_l1c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2c_1p8: ldo2 {
|
|
regulator-name = "vreg_l2c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6c_1p8: ldo6 {
|
|
regulator-name = "vreg_l6c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9c_2p96: ldo9 {
|
|
regulator-name = "vreg_l9c_2p96";
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10c_1p2: ldo10 {
|
|
regulator-name = "vreg_l10c_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cdsp {
|
|
status = "okay";
|
|
firmware-name = "qcom/sm8350/cdsp.mbn";
|
|
};
|
|
|
|
&dispcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
vdda-supply = <&vreg_l6b_1p2>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
port@1 {
|
|
endpoint {
|
|
remote-endpoint = <<9611_a>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdss_dsi0_phy {
|
|
vdds-supply = <&vreg_l5b_0p88>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
|
|
zap-shader {
|
|
firmware-name = "qcom/sm8350/a660_zap.mbn";
|
|
};
|
|
};
|
|
|
|
&i2c15 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
lt9611_codec: hdmi-bridge@2b {
|
|
compatible = "lontium,lt9611uxc";
|
|
reg = <0x2b>;
|
|
|
|
interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>;
|
|
reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
|
|
|
|
vdd-supply = <<9611_1v2>;
|
|
vcc-supply = <<9611_3v3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <<9611_state>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
lt9611_a: endpoint {
|
|
remote-endpoint = <&mdss_dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
lt9611_out: endpoint {
|
|
remote-endpoint = <&hdmi_con>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_mdp {
|
|
status = "okay";
|
|
};
|
|
|
|
&mpss {
|
|
status = "okay";
|
|
firmware-name = "qcom/sm8350/modem.mbn";
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_default_state>;
|
|
|
|
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0_phy {
|
|
vdda-phy-supply = <&vreg_l5b_0p88>;
|
|
vdda-pll-supply = <&vreg_l6b_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie1_default_state>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1_phy {
|
|
status = "okay";
|
|
vdda-phy-supply = <&vreg_l5b_0p88>;
|
|
vdda-pll-supply = <&vreg_l6b_1p2>;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&slpi {
|
|
status = "okay";
|
|
firmware-name = "qcom/sm8350/slpi.mbn";
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <52 8>;
|
|
|
|
gpio-line-names =
|
|
"APPS_I2C_SDA", /* GPIO_0 */
|
|
"APPS_I2C_SCL",
|
|
"FSA_INT_N",
|
|
"USER_LED3_EN",
|
|
"SMBUS_SDA_1P8",
|
|
"SMBUS_SCL_1P8",
|
|
"2M2_3P3_EN",
|
|
"ALERT_DUAL_M2_N",
|
|
"EXP_UART_CTS",
|
|
"EXP_UART_RFR",
|
|
"EXP_UART_TX", /* GPIO_10 */
|
|
"EXP_UART_RX",
|
|
"NC",
|
|
"NC",
|
|
"RCM_MARKER1",
|
|
"WSA0_EN",
|
|
"CAM1_RESET_N",
|
|
"CAM0_RESET_N",
|
|
"DEBUG_UART_TX",
|
|
"DEBUG_UART_RX",
|
|
"TS_I2C_SDA", /* GPIO_20 */
|
|
"TS_I2C_SCL",
|
|
"TS_RESET_N",
|
|
"TS_INT_N",
|
|
"DISP0_RESET_N",
|
|
"DISP1_RESET_N",
|
|
"ETH_RESET",
|
|
"RCM_MARKER2",
|
|
"CAM_DC_MIPI_MUX_EN",
|
|
"CAM_DC_MIPI_MUX_SEL",
|
|
"AFC_PHY_TA_D_PLUS", /* GPIO_30 */
|
|
"AFC_PHY_TA_D_MINUS",
|
|
"PM8008_1_IRQ",
|
|
"PM8008_1_RESET_N",
|
|
"PM8008_2_IRQ",
|
|
"PM8008_2_RESET_N",
|
|
"CAM_DC_I3C_SDA",
|
|
"CAM_DC_I3C_SCL",
|
|
"FP_INT_N",
|
|
"FP_WUHB_INT_N",
|
|
"SMB_SPMI_DATA", /* GPIO_40 */
|
|
"SMB_SPMI_CLK",
|
|
"USB_HUB_RESET",
|
|
"FORCE_USB_BOOT",
|
|
"LRF_IRQ",
|
|
"NC",
|
|
"IMU2_INT",
|
|
"HDMI_3P3_EN",
|
|
"HDMI_RSTN",
|
|
"HDMI_1P2_EN",
|
|
"HDMI_INT", /* GPIO_50 */
|
|
"USB1_ID",
|
|
"FP_SPI_MISO",
|
|
"FP_SPI_MOSI",
|
|
"FP_SPI_CLK",
|
|
"FP_SPI_CS_N",
|
|
"NFC_ESE_SPI_MISO",
|
|
"NFC_ESE_SPI_MOSI",
|
|
"NFC_ESE_SPI_CLK",
|
|
"NFC_ESE_SPI_CS",
|
|
"NFC_I2C_SDA", /* GPIO_60 */
|
|
"NFC_I2C_SCLC",
|
|
"NFC_EN",
|
|
"NFC_CLK_REQ",
|
|
"HST_WLAN_EN",
|
|
"HST_BT_EN",
|
|
"HST_SW_CTRL",
|
|
"NC",
|
|
"HST_BT_UART_CTS",
|
|
"HST_BT_UART_RFR",
|
|
"HST_BT_UART_TX", /* GPIO_70 */
|
|
"HST_BT_UART_RX",
|
|
"CAM_DC_SPI0_MISO",
|
|
"CAM_DC_SPI0_MOSI",
|
|
"CAM_DC_SPI0_CLK",
|
|
"CAM_DC_SPI0_CS_N",
|
|
"CAM_DC_SPI1_MISO",
|
|
"CAM_DC_SPI1_MOSI",
|
|
"CAM_DC_SPI1_CLK",
|
|
"CAM_DC_SPI1_CS_N",
|
|
"HALL_INT_N", /* GPIO_80 */
|
|
"USB_PHY_PS",
|
|
"MDP_VSYNC_P",
|
|
"MDP_VSYNC_S",
|
|
"ETH_3P3_EN",
|
|
"RADAR_INT",
|
|
"NFC_DWL_REQ",
|
|
"SM_GPIO_87",
|
|
"WCD_RESET_N",
|
|
"ALSP_INT_N",
|
|
"PRESS_INT", /* GPIO_90 */
|
|
"SAR_INT_N",
|
|
"SD_CARD_DET_N",
|
|
"NC",
|
|
"PCIE0_RESET_N",
|
|
"PCIE0_CLK_REQ_N",
|
|
"PCIE0_WAKE_N",
|
|
"PCIE1_RESET_N",
|
|
"PCIE1_CLK_REQ_N",
|
|
"PCIE1_WAKE_N",
|
|
"CAM_MCLK0", /* GPIO_100 */
|
|
"CAM_MCLK1",
|
|
"CAM_MCLK2",
|
|
"CAM_MCLK3",
|
|
"CAM_MCLK4",
|
|
"CAM_MCLK5",
|
|
"CAM2_RESET_N",
|
|
"CCI_I2C0_SDA",
|
|
"CCI_I2C0_SCL",
|
|
"CCI_I2C1_SDA",
|
|
"CCI_I2C1_SCL", /* GPIO_110 */
|
|
"CCI_I2C2_SDA",
|
|
"CCI_I2C2_SCL",
|
|
"CCI_I2C3_SDA",
|
|
"CCI_I2C3_SCL",
|
|
"CAM5_RESET_N",
|
|
"CAM4_RESET_N",
|
|
"CAM3_RESET_N",
|
|
"IMU1_INT",
|
|
"MAG_INT_N",
|
|
"MI2S2_I2S_SCK", /* GPIO_120 */
|
|
"MI2S2_I2S_DAT0",
|
|
"MI2S2_I2S_WS",
|
|
"HIFI_DAC_I2S_MCLK",
|
|
"MI2S2_I2S_DAT1",
|
|
"HIFI_DAC_I2S_SCK",
|
|
"HIFI_DAC_I2S_DAT0",
|
|
"NC",
|
|
"HIFI_DAC_I2S_WS",
|
|
"HST_BT_WLAN_SLIMBUS_CLK",
|
|
"HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
|
|
"BT_LED_EN",
|
|
"WLAN_LED_EN",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"UIM2_PRESENT",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"UIM1_PRESENT", /* GPIO_140 */
|
|
"NC",
|
|
"SM_RFFE0_DATA",
|
|
"NC",
|
|
"SM_RFFE1_DATA",
|
|
"SM_MSS_GRFC4",
|
|
"SM_MSS_GRFC5",
|
|
"SM_MSS_GRFC6",
|
|
"SM_MSS_GRFC7",
|
|
"SM_RFFE4_CLK",
|
|
"SM_RFFE4_DATA", /* GPIO_150 */
|
|
"WLAN_COEX_UART1_RX",
|
|
"WLAN_COEX_UART1_TX",
|
|
"HST_SW_CTRL",
|
|
"DSI0_STATUS",
|
|
"DSI1_STATUS",
|
|
"APPS_PBL_BOOT_SPEED_1",
|
|
"APPS_BOOT_FROM_ROM",
|
|
"APPS_PBL_BOOT_SPEED_0",
|
|
"QLINK0_REQ",
|
|
"QLINK0_EN", /* GPIO_160 */
|
|
"QLINK0_WMSS_RESET_N",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"WCD_SWR_TX_CLK",
|
|
"WCD_SWR_TX_DATA0",
|
|
"WCD_SWR_TX_DATA1", /* GPIO_170 */
|
|
"WCD_SWR_RX_CLK",
|
|
"WCD_SWR_RX_DATA0",
|
|
"WCD_SWR_RX_DATA1",
|
|
"DMIC01_CLK",
|
|
"DMIC01_DATA",
|
|
"DMIC23_CLK",
|
|
"DMIC23_DATA",
|
|
"WSA_SWR_CLK",
|
|
"WSA_SWR_DATA",
|
|
"DMIC45_CLK", /* GPIO_180 */
|
|
"DMIC45_DATA",
|
|
"WCD_SWR_TX_DATA2",
|
|
"SENSOR_I3C_SDA",
|
|
"SENSOR_I3C_SCL",
|
|
"CAM_OIS0_I3C_SDA",
|
|
"CAM_OIS0_I3C_SCL",
|
|
"IMU_SPI_MISO",
|
|
"IMU_SPI_MOSI",
|
|
"IMU_SPI_CLK",
|
|
"IMU_SPI_CS_N", /* GPIO_190 */
|
|
"MAG_I2C_SDA",
|
|
"MAG_I2C_SCL",
|
|
"SENSOR_I2C_SDA",
|
|
"SENSOR_I2C_SCL",
|
|
"RADAR_SPI_MISO",
|
|
"RADAR_SPI_MOSI",
|
|
"RADAR_SPI_CLK",
|
|
"RADAR_SPI_CS_N",
|
|
"HST_BLE_UART_TX",
|
|
"HST_BLE_UART_RX", /* GPIO_200 */
|
|
"HST_WLAN_UART_TX",
|
|
"HST_WLAN_UART_RX";
|
|
|
|
pcie0_default_state: pcie0-default-state {
|
|
perst-pins {
|
|
pins = "gpio94";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
clkreq-pins {
|
|
pins = "gpio95";
|
|
function = "pcie0_clkreqn";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
wake-pins {
|
|
pins = "gpio96";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pcie1_default_state: pcie1-default-state {
|
|
perst-pins {
|
|
pins = "gpio97";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
clkreq-pins {
|
|
pins = "gpio98";
|
|
function = "pcie1_clkreqn";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
wake-pins {
|
|
pins = "gpio99";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
status = "okay";
|
|
|
|
reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l7b_2p96>;
|
|
vcc-max-microamp = <800000>;
|
|
vccq-supply = <&vreg_l9b_1p2>;
|
|
vccq-max-microamp = <900000>;
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l5b_0p88>;
|
|
vdda-pll-supply = <&vreg_l6b_1p2>;
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
/* TODO: Define USB-C connector properly */
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
|
|
vdda-pll-supply = <&vreg_l5b_0p88>;
|
|
vdda18-supply = <&vreg_l1c_1p8>;
|
|
vdda33-supply = <&vreg_l2b_3p07>;
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l6b_1p2>;
|
|
vdda-pll-supply = <&vreg_l1b_0p88>;
|
|
};
|
|
|
|
&usb_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_2_dwc3 {
|
|
dr_mode = "host";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_hub_enabled_state>;
|
|
};
|
|
|
|
&usb_2_hsphy {
|
|
status = "okay";
|
|
|
|
vdda-pll-supply = <&vreg_l5b_0p88>;
|
|
vdda18-supply = <&vreg_l1c_1p8>;
|
|
vdda33-supply = <&vreg_l2b_3p07>;
|
|
};
|
|
|
|
&usb_2_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l6b_1p2>;
|
|
vdda-pll-supply = <&vreg_l5b_0p88>;
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in sm8350.dtsi */
|
|
|
|
&tlmm {
|
|
usb_hub_enabled_state: usb-hub-enabled-state {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
|
|
lt9611_state: lt9611-state {
|
|
rst-pins {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
|
|
output-high;
|
|
input-disable;
|
|
};
|
|
|
|
irq-pins {
|
|
pins = "gpio50";
|
|
function = "gpio";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|