870 lines
16 KiB
Plaintext
870 lines
16 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for the Ebisu board
|
|
*
|
|
* Copyright (C) 2018 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Renesas Ebisu board";
|
|
compatible = "renesas,ebisu";
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c4 = &i2c4;
|
|
i2c5 = &i2c5;
|
|
i2c6 = &i2c6;
|
|
i2c7 = &i2c7;
|
|
serial0 = &scif2;
|
|
ethernet0 = &avb;
|
|
mmc0 = &sdhi3;
|
|
mmc1 = &sdhi0;
|
|
mmc2 = &sdhi1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
audio_clkout: audio-clkout {
|
|
/*
|
|
* This is same as <&rcar_sound 0>
|
|
* but needed to avoid cs2000/rcar_sound probe dead-lock
|
|
*/
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <11289600>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm3 0 50000>;
|
|
|
|
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
|
|
default-brightness-level = <10>;
|
|
|
|
power-supply = <®_12p0v>;
|
|
};
|
|
|
|
cvbs-in {
|
|
compatible = "composite-video-connector";
|
|
label = "CVBS IN";
|
|
|
|
port {
|
|
cvbs_con: endpoint {
|
|
remote-endpoint = <&adv7482_ain7>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi-in {
|
|
compatible = "hdmi-connector";
|
|
label = "HDMI IN";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_in_con: endpoint {
|
|
remote-endpoint = <&adv7482_hdmi>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi-out {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_out: endpoint {
|
|
remote-endpoint = <&adv7511_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&keys_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
key-1 {
|
|
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_1>;
|
|
label = "SW4-1";
|
|
wakeup-source;
|
|
debounce-interval = <20>;
|
|
};
|
|
key-2 {
|
|
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_2>;
|
|
label = "SW4-2";
|
|
wakeup-source;
|
|
debounce-interval = <20>;
|
|
};
|
|
key-3 {
|
|
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_3>;
|
|
label = "SW4-3";
|
|
wakeup-source;
|
|
debounce-interval = <20>;
|
|
};
|
|
key-4 {
|
|
gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_4>;
|
|
label = "SW4-4";
|
|
wakeup-source;
|
|
debounce-interval = <20>;
|
|
};
|
|
};
|
|
|
|
lvds-decoder {
|
|
compatible = "thine,thc63lvd1024";
|
|
vcc-supply = <®_3p3v>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
thc63lvd1024_in: endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
thc63lvd1024_out: endpoint {
|
|
remote-endpoint = <&adv7511_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
memory@48000000 {
|
|
device_type = "memory";
|
|
/* first 128MB is reserved for secure area. */
|
|
reg = <0x0 0x48000000 0x0 0x38000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_12p0v: regulator-12p0v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "D12.0V";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
rsnd_ak4613: sound {
|
|
compatible = "simple-audio-card";
|
|
|
|
simple-audio-card,name = "rsnd-ak4613";
|
|
simple-audio-card,format = "left_j";
|
|
simple-audio-card,bitclock-master = <&sndcpu>;
|
|
simple-audio-card,frame-master = <&sndcpu>;
|
|
|
|
sndcodec: simple-audio-card,codec {
|
|
sound-dai = <&ak4613>;
|
|
};
|
|
|
|
sndcpu: simple-audio-card,cpu {
|
|
sound-dai = <&rcar_sound>;
|
|
};
|
|
};
|
|
|
|
vbus0_usb2: regulator-vbus0-usb2 {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "USB20_VBUS_CN";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vcc_sdhi0: regulator-vcc-sdhi0 {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "SDHI0 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vccq_sdhi0: regulator-vccq-sdhi0 {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "SDHI0 VccQ";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <1>;
|
|
states = <3300000 1>, <1800000 0>;
|
|
};
|
|
|
|
vcc_sdhi1: regulator-vcc-sdhi1 {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "SDHI1 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vccq_sdhi1: regulator-vccq-sdhi1 {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "SDHI1 VccQ";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <1>;
|
|
states = <3300000 1>, <1800000 0>;
|
|
};
|
|
|
|
vga {
|
|
compatible = "vga-connector";
|
|
|
|
port {
|
|
vga_in: endpoint {
|
|
remote-endpoint = <&adv7123_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vga-encoder {
|
|
compatible = "adi,adv7123";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
adv7123_in: endpoint {
|
|
remote-endpoint = <&du_out_rgb>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
adv7123_out: endpoint {
|
|
remote-endpoint = <&vga_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
x12_clk: x12 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24576000>;
|
|
};
|
|
|
|
x13_clk: x13 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <74250000>;
|
|
};
|
|
};
|
|
|
|
&audio_clk_a {
|
|
clock-frequency = <22579200>;
|
|
};
|
|
|
|
&avb {
|
|
pinctrl-0 = <&avb_pins>;
|
|
pinctrl-names = "default";
|
|
phy-handle = <&phy0>;
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id0022.1622",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
rxc-skew-ps = <1500>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
|
/*
|
|
* TX clock internal delay mode is required for reliable
|
|
* 1Gbps communication using the KSZ9031RNX phy present on
|
|
* the Ebisu board, however, TX clock internal delay mode
|
|
* isn't supported on R-Car E3(e). Thus, limit speed to
|
|
* 100Mbps for reliable communication.
|
|
*/
|
|
max-speed = <100>;
|
|
};
|
|
};
|
|
|
|
&canfd {
|
|
pinctrl-0 = <&canfd0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
channel0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&csi40 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
port@0 {
|
|
csi40_in: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2>;
|
|
remote-endpoint = <&adv7482_txa>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&du {
|
|
pinctrl-0 = <&du_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
clocks = <&cpg CPG_MOD 724>,
|
|
<&cpg CPG_MOD 723>,
|
|
<&x13_clk>;
|
|
clock-names = "du.0", "du.1", "dclkin.0";
|
|
|
|
ports {
|
|
port@0 {
|
|
du_out_rgb: endpoint {
|
|
remote-endpoint = <&adv7123_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&extal_clk {
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
&hsusb {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
io_expander: gpio@20 {
|
|
compatible = "onnn,pca9654";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
hdmi-encoder@39 {
|
|
compatible = "adi,adv7511w";
|
|
reg = <0x39>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
adi,input-depth = <8>;
|
|
adi,input-colorspace = "rgb";
|
|
adi,input-clock = "1x";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
adv7511_in: endpoint {
|
|
remote-endpoint = <&thc63lvd1024_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
adv7511_out: endpoint {
|
|
remote-endpoint = <&hdmi_con_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
video-receiver@70 {
|
|
compatible = "adi,adv7482";
|
|
reg = <0x70>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupt-names = "intrq1", "intrq2";
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
|
|
<17 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
adv7482_ain7: endpoint {
|
|
remote-endpoint = <&cvbs_con>;
|
|
};
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
adv7482_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_in_con>;
|
|
};
|
|
};
|
|
|
|
port@a {
|
|
reg = <10>;
|
|
|
|
adv7482_txa: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2>;
|
|
remote-endpoint = <&csi40_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
ak4613: codec@10 {
|
|
compatible = "asahi-kasei,ak4613";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x10>;
|
|
clocks = <&rcar_sound 3>;
|
|
|
|
asahi-kasei,in1-single-end;
|
|
asahi-kasei,in2-single-end;
|
|
asahi-kasei,out1-single-end;
|
|
asahi-kasei,out2-single-end;
|
|
asahi-kasei,out3-single-end;
|
|
asahi-kasei,out4-single-end;
|
|
asahi-kasei,out5-single-end;
|
|
asahi-kasei,out6-single-end;
|
|
};
|
|
|
|
cs2000: clk-multiplier@4f {
|
|
#clock-cells = <0>;
|
|
compatible = "cirrus,cs2000-cp";
|
|
reg = <0x4f>;
|
|
clocks = <&audio_clkout>, <&x12_clk>;
|
|
clock-names = "clk_in", "ref_clk";
|
|
|
|
assigned-clocks = <&cs2000>;
|
|
assigned-clock-rates = <24576000>; /* 1/1 divide */
|
|
};
|
|
};
|
|
|
|
&i2c_dvfs {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
pmic: pmic@30 {
|
|
pinctrl-0 = <&irq0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
compatible = "rohm,bd9571mwv";
|
|
reg = <0x30>;
|
|
interrupt-parent = <&intc_ex>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
rohm,ddr-backup-power = <0x1>;
|
|
rohm,rstbmode-level;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "rohm,br24t01", "atmel,24c01";
|
|
reg = <0x50>;
|
|
pagesize = <8>;
|
|
};
|
|
};
|
|
|
|
&lvds0 {
|
|
status = "okay";
|
|
|
|
clocks = <&cpg CPG_MOD 727>,
|
|
<&x13_clk>,
|
|
<&extal_clk>;
|
|
clock-names = "fck", "dclkin.0", "extal";
|
|
|
|
ports {
|
|
port@1 {
|
|
lvds0_out: endpoint {
|
|
remote-endpoint = <&thc63lvd1024_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&lvds1 {
|
|
/*
|
|
* Even though the LVDS1 output is not connected, the encoder must be
|
|
* enabled to supply a pixel clock to the DU for the DPAD output when
|
|
* LVDS0 is in use.
|
|
*/
|
|
status = "okay";
|
|
|
|
clocks = <&cpg CPG_MOD 727>,
|
|
<&x13_clk>,
|
|
<&extal_clk>;
|
|
clock-names = "fck", "dclkin.0", "extal";
|
|
};
|
|
|
|
&ohci0 {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_bus_clk {
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
&pciec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pfc {
|
|
avb_pins: avb {
|
|
groups = "avb_link", "avb_mii";
|
|
function = "avb";
|
|
};
|
|
|
|
canfd0_pins: canfd0 {
|
|
groups = "canfd0_data";
|
|
function = "canfd0";
|
|
};
|
|
|
|
du_pins: du {
|
|
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
|
|
function = "du";
|
|
};
|
|
|
|
irq0_pins: irq0 {
|
|
groups = "intc_ex_irq0";
|
|
function = "intc_ex";
|
|
};
|
|
|
|
keys_pins: keys {
|
|
pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
|
|
bias-pull-up;
|
|
};
|
|
|
|
pwm3_pins: pwm3 {
|
|
groups = "pwm3_b";
|
|
function = "pwm3";
|
|
};
|
|
|
|
pwm5_pins: pwm5 {
|
|
groups = "pwm5_a";
|
|
function = "pwm5";
|
|
};
|
|
|
|
rpc_pins: rpc {
|
|
groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
|
|
"rpc_int";
|
|
function = "rpc";
|
|
};
|
|
|
|
scif2_pins: scif2 {
|
|
groups = "scif2_data_a";
|
|
function = "scif2";
|
|
};
|
|
|
|
sdhi0_pins: sd0 {
|
|
groups = "sdhi0_data4", "sdhi0_ctrl";
|
|
function = "sdhi0";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sdhi0_pins_uhs: sd0_uhs {
|
|
groups = "sdhi0_data4", "sdhi0_ctrl";
|
|
function = "sdhi0";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sdhi1_pins: sd1 {
|
|
groups = "sdhi1_data4", "sdhi1_ctrl";
|
|
function = "sdhi1";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sdhi1_pins_uhs: sd1_uhs {
|
|
groups = "sdhi1_data4", "sdhi1_ctrl";
|
|
function = "sdhi1";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sdhi3_pins: sd3 {
|
|
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
|
|
function = "sdhi3";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sound_clk_pins: sound_clk {
|
|
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
|
|
"audio_clkout_a", "audio_clkout1_a";
|
|
function = "audio_clk";
|
|
};
|
|
|
|
sound_pins: sound {
|
|
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
|
|
function = "ssi";
|
|
};
|
|
|
|
usb0_pins: usb {
|
|
groups = "usb0_b", "usb0_id";
|
|
function = "usb0";
|
|
};
|
|
|
|
usb30_pins: usb30 {
|
|
groups = "usb30";
|
|
function = "usb30";
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-0 = <&pwm3_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm5 {
|
|
pinctrl-0 = <&pwm5_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&rcar_sound {
|
|
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
/* Single DAI */
|
|
#sound-dai-cells = <0>;
|
|
|
|
/* audio_clkout0/1/2/3 */
|
|
#clock-cells = <1>;
|
|
clock-frequency = <12288000 11289600>;
|
|
|
|
status = "okay";
|
|
|
|
/* update <audio_clk_b> to <cs2000> */
|
|
clocks = <&cpg CPG_MOD 1005>,
|
|
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
|
|
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
|
|
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
|
|
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
|
|
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
|
|
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
|
|
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
|
|
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
|
|
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
|
|
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
|
|
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
|
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
|
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
|
|
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
|
|
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
|
|
|
|
rcar_sound,dai {
|
|
dai0 {
|
|
playback = <&ssi0>, <&src0>, <&dvc0>;
|
|
capture = <&ssi1>, <&src1>, <&dvc1>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&rpc {
|
|
pinctrl-0 = <&rpc_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
/* Left disabled. To be enabled by firmware when unlocked. */
|
|
|
|
flash@0 {
|
|
compatible = "cypress,hyperflash", "cfi-flash";
|
|
reg = <0>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
bootparam@0 {
|
|
reg = <0x00000000 0x040000>;
|
|
read-only;
|
|
};
|
|
bl2@40000 {
|
|
reg = <0x00040000 0x140000>;
|
|
read-only;
|
|
};
|
|
cert_header_sa6@180000 {
|
|
reg = <0x00180000 0x040000>;
|
|
read-only;
|
|
};
|
|
bl31@1c0000 {
|
|
reg = <0x001c0000 0x040000>;
|
|
read-only;
|
|
};
|
|
tee@200000 {
|
|
reg = <0x00200000 0x440000>;
|
|
read-only;
|
|
};
|
|
uboot@640000 {
|
|
reg = <0x00640000 0x100000>;
|
|
read-only;
|
|
};
|
|
dtb@740000 {
|
|
reg = <0x00740000 0x080000>;
|
|
};
|
|
kernel@7c0000 {
|
|
reg = <0x007c0000 0x1400000>;
|
|
};
|
|
user@1bc0000 {
|
|
reg = <0x01bc0000 0x2440000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&rwdt {
|
|
timeout-sec = <60>;
|
|
status = "okay";
|
|
};
|
|
|
|
&scif2 {
|
|
pinctrl-0 = <&scif2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi0 {
|
|
pinctrl-0 = <&sdhi0_pins>;
|
|
pinctrl-1 = <&sdhi0_pins_uhs>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <&vcc_sdhi0>;
|
|
vqmmc-supply = <&vccq_sdhi0>;
|
|
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
|
|
bus-width = <4>;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi1 {
|
|
pinctrl-0 = <&sdhi1_pins>;
|
|
pinctrl-1 = <&sdhi1_pins_uhs>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <&vcc_sdhi1>;
|
|
vqmmc-supply = <&vccq_sdhi1>;
|
|
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi3 {
|
|
/* used for on-board 8bit eMMC */
|
|
pinctrl-0 = <&sdhi3_pins>;
|
|
pinctrl-1 = <&sdhi3_pins>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
bus-width = <8>;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
full-pwr-cycle-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
shared-pin;
|
|
};
|
|
|
|
&usb2_phy0 {
|
|
pinctrl-0 = <&usb0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vbus-supply = <&vbus0_usb2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_peri0 {
|
|
companion = <&xhci0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vin4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vin5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&xhci0 {
|
|
pinctrl-0 = <&usb30_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|