linux-zen-desktop/drivers/dma/ptdma/ptdma.h

338 lines
8.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* AMD Passthru DMA device driver
* -- Based on the CCP driver
*
* Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
*
* Author: Sanjay R Mehta <sanju.mehta@amd.com>
* Author: Tom Lendacky <thomas.lendacky@amd.com>
* Author: Gary R Hook <gary.hook@amd.com>
*/
#ifndef __PT_DEV_H__
#define __PT_DEV_H__
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/dmapool.h>
#include "../virt-dma.h"
#define MAX_PT_NAME_LEN 16
#define MAX_DMAPOOL_NAME_LEN 32
#define MAX_HW_QUEUES 1
#define MAX_CMD_QLEN 100
#define PT_ENGINE_PASSTHRU 5
/* Register Mappings */
#define IRQ_MASK_REG 0x040
#define IRQ_STATUS_REG 0x200
#define CMD_Q_ERROR(__qs) ((__qs) & 0x0000003f)
#define CMD_QUEUE_PRIO_OFFSET 0x00
#define CMD_REQID_CONFIG_OFFSET 0x04
#define CMD_TIMEOUT_OFFSET 0x08
#define CMD_PT_VERSION 0x10
#define CMD_Q_CONTROL_BASE 0x0000
#define CMD_Q_TAIL_LO_BASE 0x0004
#define CMD_Q_HEAD_LO_BASE 0x0008
#define CMD_Q_INT_ENABLE_BASE 0x000C
#define CMD_Q_INTERRUPT_STATUS_BASE 0x0010
#define CMD_Q_STATUS_BASE 0x0100
#define CMD_Q_INT_STATUS_BASE 0x0104
#define CMD_Q_DMA_STATUS_BASE 0x0108
#define CMD_Q_DMA_READ_STATUS_BASE 0x010C
#define CMD_Q_DMA_WRITE_STATUS_BASE 0x0110
#define CMD_Q_ABORT_BASE 0x0114
#define CMD_Q_AX_CACHE_BASE 0x0118
#define CMD_CONFIG_OFFSET 0x1120
#define CMD_CLK_GATE_CTL_OFFSET 0x6004
#define CMD_DESC_DW0_VAL 0x500012
/* Address offset for virtual queue registers */
#define CMD_Q_STATUS_INCR 0x1000
/* Bit masks */
#define CMD_CONFIG_REQID 0
#define CMD_TIMEOUT_DISABLE 0
#define CMD_CLK_DYN_GATING_DIS 0
#define CMD_CLK_SW_GATE_MODE 0
#define CMD_CLK_GATE_CTL 0
#define CMD_QUEUE_PRIO GENMASK(2, 1)
#define CMD_CONFIG_VHB_EN BIT(0)
#define CMD_CLK_DYN_GATING_EN BIT(0)
#define CMD_CLK_HW_GATE_MODE BIT(0)
#define CMD_CLK_GATE_ON_DELAY BIT(12)
#define CMD_CLK_GATE_OFF_DELAY BIT(12)
#define CMD_CLK_GATE_CONFIG (CMD_CLK_GATE_CTL | \
CMD_CLK_HW_GATE_MODE | \
CMD_CLK_GATE_ON_DELAY | \
CMD_CLK_DYN_GATING_EN | \
CMD_CLK_GATE_OFF_DELAY)
#define CMD_Q_LEN 32
#define CMD_Q_RUN BIT(0)
#define CMD_Q_HALT BIT(1)
#define CMD_Q_MEM_LOCATION BIT(2)
#define CMD_Q_SIZE_MASK GENMASK(4, 0)
#define CMD_Q_SIZE GENMASK(7, 3)
#define CMD_Q_SHIFT GENMASK(1, 0)
#define QUEUE_SIZE_VAL ((ffs(CMD_Q_LEN) - 2) & \
CMD_Q_SIZE_MASK)
#define Q_PTR_MASK (2 << (QUEUE_SIZE_VAL + 5) - 1)
#define Q_DESC_SIZE sizeof(struct ptdma_desc)
#define Q_SIZE(n) (CMD_Q_LEN * (n))
#define INT_COMPLETION BIT(0)
#define INT_ERROR BIT(1)
#define INT_QUEUE_STOPPED BIT(2)
#define INT_EMPTY_QUEUE BIT(3)
#define SUPPORTED_INTERRUPTS (INT_COMPLETION | INT_ERROR)
/****** Local Storage Block ******/
#define LSB_START 0
#define LSB_END 127
#define LSB_COUNT (LSB_END - LSB_START + 1)
#define PT_DMAPOOL_MAX_SIZE 64
#define PT_DMAPOOL_ALIGN BIT(5)
#define PT_PASSTHRU_BLOCKSIZE 512
struct pt_device;
struct pt_tasklet_data {
struct completion completion;
struct pt_cmd *cmd;
};
/*
* struct pt_passthru_engine - pass-through operation
* without performing DMA mapping
* @mask: mask to be applied to data
* @mask_len: length in bytes of mask
* @src_dma: data to be used for this operation
* @dst_dma: data produced by this operation
* @src_len: length in bytes of data used for this operation
*
* Variables required to be set when calling pt_enqueue_cmd():
* - bit_mod, byte_swap, src, dst, src_len
* - mask, mask_len if bit_mod is not PT_PASSTHRU_BITWISE_NOOP
*/
struct pt_passthru_engine {
dma_addr_t mask;
u32 mask_len; /* In bytes */
dma_addr_t src_dma, dst_dma;
u64 src_len; /* In bytes */
};
/*
* struct pt_cmd - PTDMA operation request
* @entry: list element
* @work: work element used for callbacks
* @pt: PT device to be run on
* @ret: operation return code
* @flags: cmd processing flags
* @engine: PTDMA operation to perform (passthru)
* @engine_error: PT engine return code
* @passthru: engine specific structures, refer to specific engine struct below
* @callback: operation completion callback function
* @data: parameter value to be supplied to the callback function
*
* Variables required to be set when calling pt_enqueue_cmd():
* - engine, callback
* - See the operation structures below for what is required for each
* operation.
*/
struct pt_cmd {
struct list_head entry;
struct work_struct work;
struct pt_device *pt;
int ret;
u32 engine;
u32 engine_error;
struct pt_passthru_engine passthru;
/* Completion callback support */
void (*pt_cmd_callback)(void *data, int err);
void *data;
};
struct pt_dma_desc {
struct virt_dma_desc vd;
struct pt_device *pt;
enum dma_status status;
size_t len;
bool issued_to_hw;
struct pt_cmd pt_cmd;
};
struct pt_dma_chan {
struct virt_dma_chan vc;
struct pt_device *pt;
};
struct pt_cmd_queue {
struct pt_device *pt;
/* Queue dma pool */
struct dma_pool *dma_pool;
/* Queue base address (not neccessarily aligned)*/
struct ptdma_desc *qbase;
/* Aligned queue start address (per requirement) */
spinlock_t q_lock ____cacheline_aligned;
unsigned int qidx;
unsigned int qsize;
dma_addr_t qbase_dma;
dma_addr_t qdma_tail;
unsigned int active;
unsigned int suspended;
/* Interrupt flag */
bool int_en;
/* Register addresses for queue */
void __iomem *reg_control;
u32 qcontrol; /* Cached control register */
/* Status values from job */
u32 int_status;
u32 q_status;
u32 q_int_status;
u32 cmd_error;
/* Queue Statistics */
unsigned long total_pt_ops;
} ____cacheline_aligned;
struct pt_device {
struct list_head entry;
unsigned int ord;
char name[MAX_PT_NAME_LEN];
struct device *dev;
/* Bus specific device information */
struct pt_msix *pt_msix;
struct pt_dev_vdata *dev_vdata;
unsigned int pt_irq;
/* I/O area used for device communication */
void __iomem *io_regs;
spinlock_t cmd_lock ____cacheline_aligned;
unsigned int cmd_count;
struct list_head cmd;
/*
* The command queue. This represent the queue available on the
* PTDMA that are available for processing cmds
*/
struct pt_cmd_queue cmd_q;
/* Support for the DMA Engine capabilities */
struct dma_device dma_dev;
struct pt_dma_chan *pt_dma_chan;
struct kmem_cache *dma_cmd_cache;
struct kmem_cache *dma_desc_cache;
wait_queue_head_t lsb_queue;
/* Device Statistics */
unsigned long total_interrupts;
struct pt_tasklet_data tdata;
};
/*
* descriptor for PTDMA commands
* 8 32-bit words:
* word 0: function; engine; control bits
* word 1: length of source data
* word 2: low 32 bits of source pointer
* word 3: upper 16 bits of source pointer; source memory type
* word 4: low 32 bits of destination pointer
* word 5: upper 16 bits of destination pointer; destination memory type
* word 6: reserved 32 bits
* word 7: reserved 32 bits
*/
#define DWORD0_SOC BIT(0)
#define DWORD0_IOC BIT(1)
struct dword3 {
unsigned int src_hi:16;
unsigned int src_mem:2;
unsigned int lsb_cxt_id:8;
unsigned int rsvd1:5;
unsigned int fixed:1;
};
struct dword5 {
unsigned int dst_hi:16;
unsigned int dst_mem:2;
unsigned int rsvd1:13;
unsigned int fixed:1;
};
struct ptdma_desc {
u32 dw0;
u32 length;
u32 src_lo;
struct dword3 dw3;
u32 dst_lo;
struct dword5 dw5;
__le32 rsvd1;
__le32 rsvd2;
};
/* Structure to hold PT device data */
struct pt_dev_vdata {
const unsigned int bar;
};
int pt_dmaengine_register(struct pt_device *pt);
void pt_dmaengine_unregister(struct pt_device *pt);
void ptdma_debugfs_setup(struct pt_device *pt);
int pt_core_init(struct pt_device *pt);
void pt_core_destroy(struct pt_device *pt);
int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
struct pt_passthru_engine *pt_engine);
void pt_check_status_trans(struct pt_device *pt, struct pt_cmd_queue *cmd_q);
void pt_start_queue(struct pt_cmd_queue *cmd_q);
void pt_stop_queue(struct pt_cmd_queue *cmd_q);
static inline void pt_core_disable_queue_interrupts(struct pt_device *pt)
{
iowrite32(0, pt->cmd_q.reg_control + 0x000C);
}
static inline void pt_core_enable_queue_interrupts(struct pt_device *pt)
{
iowrite32(SUPPORTED_INTERRUPTS, pt->cmd_q.reg_control + 0x000C);
}
#endif