linux-zen-desktop/drivers/misc/lattice-ecp3-config.c

243 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/unaligned.h>
#define FIRMWARE_NAME "lattice-ecp3.bit"
/*
* The JTAG ID's of the supported FPGA's. The ID is 32bit wide
* reversed as noted in the manual.
*/
#define ID_ECP3_17 0xc2088080
#define ID_ECP3_35 0xc2048080
/* FPGA commands */
#define FPGA_CMD_READ_ID 0x07 /* plus 24 bits */
#define FPGA_CMD_READ_STATUS 0x09 /* plus 24 bits */
#define FPGA_CMD_CLEAR 0x70
#define FPGA_CMD_REFRESH 0x71
#define FPGA_CMD_WRITE_EN 0x4a /* plus 2 bits */
#define FPGA_CMD_WRITE_DIS 0x4f /* plus 8 bits */
#define FPGA_CMD_WRITE_INC 0x41 /* plus 0 bits */
/*
* The status register is 32bit revered, DONE is bit 17 from the TN1222.pdf
* (LatticeECP3 Slave SPI Port User's Guide)
*/
#define FPGA_STATUS_DONE 0x00004000
#define FPGA_STATUS_CLEARED 0x00010000
#define FPGA_CLEAR_TIMEOUT 5000 /* max. 5000ms for FPGA clear */
#define FPGA_CLEAR_MSLEEP 10
#define FPGA_CLEAR_LOOP_COUNT (FPGA_CLEAR_TIMEOUT / FPGA_CLEAR_MSLEEP)
struct fpga_data {
struct completion fw_loaded;
};
struct ecp3_dev {
u32 jedec_id;
char *name;
};
static const struct ecp3_dev ecp3_dev[] = {
{
.jedec_id = ID_ECP3_17,
.name = "Lattice ECP3-17",
},
{
.jedec_id = ID_ECP3_35,
.name = "Lattice ECP3-35",
},
};
static void firmware_load(const struct firmware *fw, void *context)
{
struct spi_device *spi = (struct spi_device *)context;
struct fpga_data *data = spi_get_drvdata(spi);
u8 *buffer;
u8 txbuf[8];
u8 rxbuf[8];
int rx_len = 8;
int i;
u32 jedec_id;
u32 status;
if (fw == NULL) {
dev_err(&spi->dev, "Cannot load firmware, aborting\n");
goto out;
}
if (fw->size == 0) {
dev_err(&spi->dev, "Error: Firmware size is 0!\n");
goto out;
}
/* Fill dummy data (24 stuffing bits for commands) */
txbuf[1] = 0x00;
txbuf[2] = 0x00;
txbuf[3] = 0x00;
/* Trying to speak with the FPGA via SPI... */
txbuf[0] = FPGA_CMD_READ_ID;
spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
jedec_id = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id);
for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) {
if (jedec_id == ecp3_dev[i].jedec_id)
break;
}
if (i == ARRAY_SIZE(ecp3_dev)) {
dev_err(&spi->dev,
"Error: No supported FPGA detected (JEDEC_ID=%08x)!\n",
jedec_id);
goto out;
}
dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
txbuf[0] = FPGA_CMD_READ_STATUS;
spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
buffer = kzalloc(fw->size + 8, GFP_KERNEL);
if (!buffer) {
dev_err(&spi->dev, "Error: Can't allocate memory!\n");
goto out;
}
/*
* Insert WRITE_INC command into stream (one SPI frame)
*/
buffer[0] = FPGA_CMD_WRITE_INC;
buffer[1] = 0xff;
buffer[2] = 0xff;
buffer[3] = 0xff;
memcpy(buffer + 4, fw->data, fw->size);
txbuf[0] = FPGA_CMD_REFRESH;
spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_WRITE_EN;
spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_CLEAR;
spi_write(spi, txbuf, 4);
/*
* Wait for FPGA memory to become cleared
*/
for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) {
txbuf[0] = FPGA_CMD_READ_STATUS;
spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
if (status == FPGA_STATUS_CLEARED)
break;
msleep(FPGA_CLEAR_MSLEEP);
}
if (i == FPGA_CLEAR_LOOP_COUNT) {
dev_err(&spi->dev,
"Error: Timeout waiting for FPGA to clear (status=%08x)!\n",
status);
kfree(buffer);
goto out;
}
dev_info(&spi->dev, "Configuring the FPGA...\n");
spi_write(spi, buffer, fw->size + 8);
txbuf[0] = FPGA_CMD_WRITE_DIS;
spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_READ_STATUS;
spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
/* Check result */
if (status & FPGA_STATUS_DONE)
dev_info(&spi->dev, "FPGA successfully configured!\n");
else
dev_info(&spi->dev, "FPGA not configured (DONE not set)\n");
/*
* Don't forget to release the firmware again
*/
release_firmware(fw);
kfree(buffer);
out:
complete(&data->fw_loaded);
}
static int lattice_ecp3_probe(struct spi_device *spi)
{
struct fpga_data *data;
int err;
data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
dev_err(&spi->dev, "Memory allocation for fpga_data failed\n");
return -ENOMEM;
}
spi_set_drvdata(spi, data);
init_completion(&data->fw_loaded);
err = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
FIRMWARE_NAME, &spi->dev,
GFP_KERNEL, spi, firmware_load);
if (err) {
dev_err(&spi->dev, "Firmware loading failed with %d!\n", err);
return err;
}
dev_info(&spi->dev, "FPGA bitstream configuration driver registered\n");
return 0;
}
static void lattice_ecp3_remove(struct spi_device *spi)
{
struct fpga_data *data = spi_get_drvdata(spi);
wait_for_completion(&data->fw_loaded);
}
static const struct spi_device_id lattice_ecp3_id[] = {
{ "ecp3-17", 0 },
{ "ecp3-35", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, lattice_ecp3_id);
static struct spi_driver lattice_ecp3_driver = {
.driver = {
.name = "lattice-ecp3",
},
.probe = lattice_ecp3_probe,
.remove = lattice_ecp3_remove,
.id_table = lattice_ecp3_id,
};
module_spi_driver(lattice_ecp3_driver);
MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
MODULE_DESCRIPTION("Lattice ECP3 FPGA configuration via SPI");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FIRMWARE_NAME);