259 lines
6.4 KiB
C
259 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Driver for the Texas Instruments DP83TD510 PHY
|
|
* Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
|
|
#define DP83TD510E_PHY_ID 0x20000181
|
|
|
|
/* MDIO_MMD_VEND2 registers */
|
|
#define DP83TD510E_PHY_STS 0x10
|
|
#define DP83TD510E_STS_MII_INT BIT(7)
|
|
#define DP83TD510E_LINK_STATUS BIT(0)
|
|
|
|
#define DP83TD510E_GEN_CFG 0x11
|
|
#define DP83TD510E_GENCFG_INT_POLARITY BIT(3)
|
|
#define DP83TD510E_GENCFG_INT_EN BIT(1)
|
|
#define DP83TD510E_GENCFG_INT_OE BIT(0)
|
|
|
|
#define DP83TD510E_INTERRUPT_REG_1 0x12
|
|
#define DP83TD510E_INT1_LINK BIT(13)
|
|
#define DP83TD510E_INT1_LINK_EN BIT(5)
|
|
|
|
#define DP83TD510E_AN_STAT_1 0x60c
|
|
#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL BIT(15)
|
|
|
|
#define DP83TD510E_MSE_DETECT 0xa85
|
|
|
|
#define DP83TD510_SQI_MAX 7
|
|
|
|
/* Register values are converted to SNR(dB) as suggested by
|
|
* "Application Report - DP83TD510E Cable Diagnostics Toolkit":
|
|
* SNR(dB) = -10 * log10 (VAL/2^17) - 1.76 dB.
|
|
* SQI ranges are implemented according to "OPEN ALLIANCE - Advanced diagnostic
|
|
* features for 100BASE-T1 automotive Ethernet PHYs"
|
|
*/
|
|
static const u16 dp83td510_mse_sqi_map[] = {
|
|
0x0569, /* < 18dB */
|
|
0x044c, /* 18dB =< SNR < 19dB */
|
|
0x0369, /* 19dB =< SNR < 20dB */
|
|
0x02b6, /* 20dB =< SNR < 21dB */
|
|
0x0227, /* 21dB =< SNR < 22dB */
|
|
0x01b6, /* 22dB =< SNR < 23dB */
|
|
0x015b, /* 23dB =< SNR < 24dB */
|
|
0x0000 /* 24dB =< SNR */
|
|
};
|
|
|
|
static int dp83td510_config_intr(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
/* Clear any pending interrupts */
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
|
|
0x0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
|
|
DP83TD510E_INTERRUPT_REG_1,
|
|
DP83TD510E_INT1_LINK_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
|
|
DP83TD510E_GEN_CFG,
|
|
DP83TD510E_GENCFG_INT_POLARITY |
|
|
DP83TD510E_GENCFG_INT_EN |
|
|
DP83TD510E_GENCFG_INT_OE);
|
|
} else {
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
|
|
DP83TD510E_INTERRUPT_REG_1, 0x0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
|
|
DP83TD510E_GEN_CFG,
|
|
DP83TD510E_GENCFG_INT_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clear any pending interrupts */
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
|
|
0x0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS);
|
|
if (ret < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
} else if (!(ret & DP83TD510E_STS_MII_INT)) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Read the current enabled interrupts */
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1);
|
|
if (ret < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
} else if (!(ret & DP83TD510E_INT1_LINK_EN) ||
|
|
!(ret & DP83TD510E_INT1_LINK)) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int dp83td510_read_status(struct phy_device *phydev)
|
|
{
|
|
u16 phy_sts;
|
|
int ret;
|
|
|
|
phydev->speed = SPEED_UNKNOWN;
|
|
phydev->duplex = DUPLEX_UNKNOWN;
|
|
phydev->pause = 0;
|
|
phydev->asym_pause = 0;
|
|
linkmode_zero(phydev->lp_advertising);
|
|
|
|
phy_sts = phy_read(phydev, DP83TD510E_PHY_STS);
|
|
|
|
phydev->link = !!(phy_sts & DP83TD510E_LINK_STATUS);
|
|
if (phydev->link) {
|
|
/* This PHY supports only one link mode: 10BaseT1L_Full */
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->speed = SPEED_10;
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
ret = genphy_c45_read_lpa(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_resolve_aneg_linkmode(phydev);
|
|
}
|
|
}
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
ret = genphy_c45_baset1_read_status(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
|
|
DP83TD510E_AN_STAT_1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & DP83TD510E_MASTER_SLAVE_RESOL_FAIL)
|
|
phydev->master_slave_state = MASTER_SLAVE_STATE_ERR;
|
|
} else {
|
|
return genphy_c45_pma_baset1_read_master_slave(phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83td510_config_aneg(struct phy_device *phydev)
|
|
{
|
|
bool changed = false;
|
|
int ret;
|
|
|
|
ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (phydev->autoneg == AUTONEG_DISABLE)
|
|
return genphy_c45_an_disable_aneg(phydev);
|
|
|
|
ret = genphy_c45_an_config_aneg(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret > 0)
|
|
changed = true;
|
|
|
|
return genphy_c45_check_and_restart_aneg(phydev, changed);
|
|
}
|
|
|
|
static int dp83td510_get_sqi(struct phy_device *phydev)
|
|
{
|
|
int sqi, ret;
|
|
u16 mse_val;
|
|
|
|
if (!phydev->link)
|
|
return 0;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_MSE_DETECT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mse_val = 0xFFFF & ret;
|
|
for (sqi = 0; sqi < ARRAY_SIZE(dp83td510_mse_sqi_map); sqi++) {
|
|
if (mse_val >= dp83td510_mse_sqi_map[sqi])
|
|
return sqi;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int dp83td510_get_sqi_max(struct phy_device *phydev)
|
|
{
|
|
return DP83TD510_SQI_MAX;
|
|
}
|
|
|
|
static int dp83td510_get_features(struct phy_device *phydev)
|
|
{
|
|
/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
|
|
* In case RMII mode is used (most meaningful mode for this PHY) and
|
|
* the PHY do not have own XTAL, and CLK providing MAC is not probed,
|
|
* we won't be able to read all needed ability registers.
|
|
* So provide it manually.
|
|
*/
|
|
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
|
|
phydev->supported);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver dp83td510_driver[] = {
|
|
{
|
|
PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
|
|
.name = "TI DP83TD510E",
|
|
|
|
.config_aneg = dp83td510_config_aneg,
|
|
.read_status = dp83td510_read_status,
|
|
.get_features = dp83td510_get_features,
|
|
.config_intr = dp83td510_config_intr,
|
|
.handle_interrupt = dp83td510_handle_interrupt,
|
|
.get_sqi = dp83td510_get_sqi,
|
|
.get_sqi_max = dp83td510_get_sqi_max,
|
|
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
} };
|
|
module_phy_driver(dp83td510_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused dp83td510_tbl[] = {
|
|
{ PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(mdio, dp83td510_tbl);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver");
|
|
MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|