227 lines
6.2 KiB
C
227 lines
6.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
|
|
/*
|
|
* Copyright (C) 2012-2014, 2019-2021 Intel Corporation
|
|
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
|
|
* Copyright (C) 2016-2017 Intel Deutschland GmbH
|
|
*/
|
|
#ifndef __iwl_fw_api_phy_h__
|
|
#define __iwl_fw_api_phy_h__
|
|
|
|
/**
|
|
* enum iwl_phy_ops_subcmd_ids - PHY group commands
|
|
*/
|
|
enum iwl_phy_ops_subcmd_ids {
|
|
/**
|
|
* @CMD_DTS_MEASUREMENT_TRIGGER_WIDE:
|
|
* Uses either &struct iwl_dts_measurement_cmd or
|
|
* &struct iwl_ext_dts_measurement_cmd
|
|
*/
|
|
CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
|
|
|
|
/**
|
|
* @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd
|
|
*/
|
|
CTDP_CONFIG_CMD = 0x03,
|
|
|
|
/**
|
|
* @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd
|
|
*/
|
|
TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
|
|
|
|
/**
|
|
* @PER_CHAIN_LIMIT_OFFSET_CMD: &struct iwl_geo_tx_power_profiles_cmd
|
|
*/
|
|
PER_CHAIN_LIMIT_OFFSET_CMD = 0x05,
|
|
|
|
/**
|
|
* @PER_PLATFORM_ANT_GAIN_CMD: &struct iwl_ppag_table_cmd
|
|
*/
|
|
PER_PLATFORM_ANT_GAIN_CMD = 0x07,
|
|
|
|
/**
|
|
* @CT_KILL_NOTIFICATION: &struct ct_kill_notif
|
|
*/
|
|
CT_KILL_NOTIFICATION = 0xFE,
|
|
|
|
/**
|
|
* @DTS_MEASUREMENT_NOTIF_WIDE:
|
|
* &struct iwl_dts_measurement_notif_v1 or
|
|
* &struct iwl_dts_measurement_notif_v2
|
|
*/
|
|
DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
|
|
};
|
|
|
|
/* DTS measurements */
|
|
|
|
enum iwl_dts_measurement_flags {
|
|
DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0),
|
|
DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1),
|
|
};
|
|
|
|
/**
|
|
* struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
|
|
*
|
|
* @flags: indicates which measurements we want as specified in
|
|
* &enum iwl_dts_measurement_flags
|
|
*/
|
|
struct iwl_dts_measurement_cmd {
|
|
__le32 flags;
|
|
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
|
|
|
|
/**
|
|
* enum iwl_dts_control_measurement_mode - DTS measurement type
|
|
* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
|
|
* back (latest value. Not waiting for new value). Use automatic
|
|
* SW DTS configuration.
|
|
* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
|
|
* trigger DTS reading and provide read back temperature read
|
|
* when available.
|
|
* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
|
|
* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
|
|
* without measurement trigger.
|
|
*/
|
|
enum iwl_dts_control_measurement_mode {
|
|
DTS_AUTOMATIC = 0,
|
|
DTS_REQUEST_READ = 1,
|
|
DTS_OVER_WRITE = 2,
|
|
DTS_DIRECT_WITHOUT_MEASURE = 3,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
|
|
* @DTS_USE_TOP: Top
|
|
* @DTS_USE_CHAIN_A: chain A
|
|
* @DTS_USE_CHAIN_B: chain B
|
|
* @DTS_USE_CHAIN_C: chain C
|
|
* @XTAL_TEMPERATURE: read temperature from xtal
|
|
*/
|
|
enum iwl_dts_used {
|
|
DTS_USE_TOP = 0,
|
|
DTS_USE_CHAIN_A = 1,
|
|
DTS_USE_CHAIN_B = 2,
|
|
DTS_USE_CHAIN_C = 3,
|
|
XTAL_TEMPERATURE = 4,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
|
|
* @DTS_BIT6_MODE: bit 6 mode
|
|
* @DTS_BIT8_MODE: bit 8 mode
|
|
*/
|
|
enum iwl_dts_bit_mode {
|
|
DTS_BIT6_MODE = 0,
|
|
DTS_BIT8_MODE = 1,
|
|
};
|
|
|
|
/**
|
|
* struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
|
|
* @control_mode: see &enum iwl_dts_control_measurement_mode
|
|
* @temperature: used when over write DTS mode is selected
|
|
* @sensor: set temperature sensor to use. See &enum iwl_dts_used
|
|
* @avg_factor: average factor to DTS in request DTS read mode
|
|
* @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
|
|
* @step_duration: step duration for the DTS
|
|
*/
|
|
struct iwl_ext_dts_measurement_cmd {
|
|
__le32 control_mode;
|
|
__le32 temperature;
|
|
__le32 sensor;
|
|
__le32 avg_factor;
|
|
__le32 bit_mode;
|
|
__le32 step_duration;
|
|
} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
|
|
|
|
/**
|
|
* struct iwl_dts_measurement_notif_v1 - measurements notification
|
|
*
|
|
* @temp: the measured temperature
|
|
* @voltage: the measured voltage
|
|
*/
|
|
struct iwl_dts_measurement_notif_v1 {
|
|
__le32 temp;
|
|
__le32 voltage;
|
|
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
|
|
|
|
/**
|
|
* struct iwl_dts_measurement_notif_v2 - measurements notification
|
|
*
|
|
* @temp: the measured temperature
|
|
* @voltage: the measured voltage
|
|
* @threshold_idx: the trip index that was crossed
|
|
*/
|
|
struct iwl_dts_measurement_notif_v2 {
|
|
__le32 temp;
|
|
__le32 voltage;
|
|
__le32 threshold_idx;
|
|
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwl_dts_measurement_resp - measurements response
|
|
*
|
|
* @temp: the measured temperature
|
|
*/
|
|
struct iwl_dts_measurement_resp {
|
|
__le32 temp;
|
|
} __packed; /* CMD_DTS_MEASUREMENT_RSP_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct ct_kill_notif - CT-kill entry notification
|
|
* This structure represent both versions of this notification.
|
|
*
|
|
* @temperature: the current temperature in celsius
|
|
* @dts: only in v2: DTS that trigger the CT Kill bitmap:
|
|
* bit 0: ToP master
|
|
* bit 1: PA chain A master
|
|
* bit 2: PA chain B master
|
|
* bit 3: ToP slave
|
|
* bit 4: PA chain A slave
|
|
* bit 5: PA chain B slave)
|
|
* bits 6,7: reserved (set to 0)
|
|
* @scheme: only for v2: scheme that trigger the CT Kill (0-SW, 1-HW)
|
|
*/
|
|
struct ct_kill_notif {
|
|
__le16 temperature;
|
|
u8 dts;
|
|
u8 scheme;
|
|
} __packed; /* CT_KILL_NOTIFICATION_API_S_VER_1, CT_KILL_NOTIFICATION_API_S_VER_2 */
|
|
|
|
/**
|
|
* enum ctdp_cmd_operation - CTDP command operations
|
|
* @CTDP_CMD_OPERATION_START: update the current budget
|
|
* @CTDP_CMD_OPERATION_STOP: stop ctdp
|
|
* @CTDP_CMD_OPERATION_REPORT: get the average budget
|
|
*/
|
|
enum iwl_mvm_ctdp_cmd_operation {
|
|
CTDP_CMD_OPERATION_START = 0x1,
|
|
CTDP_CMD_OPERATION_STOP = 0x2,
|
|
CTDP_CMD_OPERATION_REPORT = 0x4,
|
|
};/* CTDP_CMD_OPERATION_TYPE_E */
|
|
|
|
/**
|
|
* struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
|
|
*
|
|
* @operation: see &enum iwl_mvm_ctdp_cmd_operation
|
|
* @budget: the budget in milliwatt
|
|
* @window_size: defined in API but not used
|
|
*/
|
|
struct iwl_mvm_ctdp_cmd {
|
|
__le32 operation;
|
|
__le32 budget;
|
|
__le32 window_size;
|
|
} __packed;
|
|
|
|
#define IWL_MAX_DTS_TRIPS 8
|
|
|
|
/**
|
|
* struct temp_report_ths_cmd - set temperature thresholds
|
|
*
|
|
* @num_temps: number of temperature thresholds passed
|
|
* @thresholds: array with the thresholds to be configured
|
|
*/
|
|
struct temp_report_ths_cmd {
|
|
__le32 num_temps;
|
|
__le16 thresholds[IWL_MAX_DTS_TRIPS];
|
|
} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
|
|
|
|
#endif /* __iwl_fw_api_phy_h__ */
|