1010 lines
26 KiB
C
1010 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* NXP Wireless LAN device driver: debugfs
|
|
*
|
|
* Copyright 2011-2020 NXP
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#include "main.h"
|
|
#include "11n.h"
|
|
|
|
|
|
static struct dentry *mwifiex_dfs_dir;
|
|
|
|
static char *bss_modes[] = {
|
|
"UNSPECIFIED",
|
|
"ADHOC",
|
|
"STATION",
|
|
"AP",
|
|
"AP_VLAN",
|
|
"WDS",
|
|
"MONITOR",
|
|
"MESH_POINT",
|
|
"P2P_CLIENT",
|
|
"P2P_GO",
|
|
"P2P_DEVICE",
|
|
};
|
|
|
|
/*
|
|
* Proc info file read handler.
|
|
*
|
|
* This function is called when the 'info' file is opened for reading.
|
|
* It prints the following driver related information -
|
|
* - Driver name
|
|
* - Driver version
|
|
* - Driver extended version
|
|
* - Interface name
|
|
* - BSS mode
|
|
* - Media state (connected or disconnected)
|
|
* - MAC address
|
|
* - Total number of Tx bytes
|
|
* - Total number of Rx bytes
|
|
* - Total number of Tx packets
|
|
* - Total number of Rx packets
|
|
* - Total number of dropped Tx packets
|
|
* - Total number of dropped Rx packets
|
|
* - Total number of corrupted Tx packets
|
|
* - Total number of corrupted Rx packets
|
|
* - Carrier status (on or off)
|
|
* - Tx queue status (started or stopped)
|
|
*
|
|
* For STA mode drivers, it also prints the following extra -
|
|
* - ESSID
|
|
* - BSSID
|
|
* - Channel
|
|
* - Region code
|
|
* - Multicast count
|
|
* - Multicast addresses
|
|
*/
|
|
static ssize_t
|
|
mwifiex_info_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *) file->private_data;
|
|
struct net_device *netdev = priv->netdev;
|
|
struct netdev_hw_addr *ha;
|
|
struct netdev_queue *txq;
|
|
unsigned long page = get_zeroed_page(GFP_KERNEL);
|
|
char *p = (char *) page, fmt[64];
|
|
struct mwifiex_bss_info info;
|
|
ssize_t ret;
|
|
int i = 0;
|
|
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
ret = mwifiex_get_bss_info(priv, &info);
|
|
if (ret)
|
|
goto free_and_exit;
|
|
|
|
mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1);
|
|
|
|
mwifiex_get_ver_ext(priv, 0);
|
|
|
|
p += sprintf(p, "driver_name = " "\"mwifiex\"\n");
|
|
p += sprintf(p, "driver_version = %s", fmt);
|
|
p += sprintf(p, "\nverext = %s", priv->version_str);
|
|
p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
|
|
|
|
if (info.bss_mode >= ARRAY_SIZE(bss_modes))
|
|
p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode);
|
|
else
|
|
p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
|
|
|
|
p += sprintf(p, "media_state=\"%s\"\n",
|
|
(!priv->media_connected ? "Disconnected" : "Connected"));
|
|
p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr);
|
|
|
|
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) {
|
|
p += sprintf(p, "multicast_count=\"%d\"\n",
|
|
netdev_mc_count(netdev));
|
|
p += sprintf(p, "essid=\"%.*s\"\n", info.ssid.ssid_len,
|
|
info.ssid.ssid);
|
|
p += sprintf(p, "bssid=\"%pM\"\n", info.bssid);
|
|
p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan);
|
|
p += sprintf(p, "country_code = \"%s\"\n", info.country_code);
|
|
p += sprintf(p, "region_code=\"0x%x\"\n",
|
|
priv->adapter->region_code);
|
|
|
|
netdev_for_each_mc_addr(ha, netdev)
|
|
p += sprintf(p, "multicast_address[%d]=\"%pM\"\n",
|
|
i++, ha->addr);
|
|
}
|
|
|
|
p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes);
|
|
p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes);
|
|
p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets);
|
|
p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets);
|
|
p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped);
|
|
p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped);
|
|
p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors);
|
|
p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors);
|
|
p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev))
|
|
? "on" : "off"));
|
|
p += sprintf(p, "tx queue");
|
|
for (i = 0; i < netdev->num_tx_queues; i++) {
|
|
txq = netdev_get_tx_queue(netdev, i);
|
|
p += sprintf(p, " %d:%s", i, netif_tx_queue_stopped(txq) ?
|
|
"stopped" : "started");
|
|
}
|
|
p += sprintf(p, "\n");
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
|
|
(unsigned long) p - page);
|
|
|
|
free_and_exit:
|
|
free_page(page);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Proc getlog file read handler.
|
|
*
|
|
* This function is called when the 'getlog' file is opened for reading
|
|
* It prints the following log information -
|
|
* - Number of multicast Tx frames
|
|
* - Number of failed packets
|
|
* - Number of Tx retries
|
|
* - Number of multicast Tx retries
|
|
* - Number of duplicate frames
|
|
* - Number of RTS successes
|
|
* - Number of RTS failures
|
|
* - Number of ACK failures
|
|
* - Number of fragmented Rx frames
|
|
* - Number of multicast Rx frames
|
|
* - Number of FCS errors
|
|
* - Number of Tx frames
|
|
* - WEP ICV error counts
|
|
* - Number of received beacons
|
|
* - Number of missed beacons
|
|
*/
|
|
static ssize_t
|
|
mwifiex_getlog_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *) file->private_data;
|
|
unsigned long page = get_zeroed_page(GFP_KERNEL);
|
|
char *p = (char *) page;
|
|
ssize_t ret;
|
|
struct mwifiex_ds_get_stats stats;
|
|
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
memset(&stats, 0, sizeof(stats));
|
|
ret = mwifiex_get_stats_info(priv, &stats);
|
|
if (ret)
|
|
goto free_and_exit;
|
|
|
|
p += sprintf(p, "\n"
|
|
"mcasttxframe %u\n"
|
|
"failed %u\n"
|
|
"retry %u\n"
|
|
"multiretry %u\n"
|
|
"framedup %u\n"
|
|
"rtssuccess %u\n"
|
|
"rtsfailure %u\n"
|
|
"ackfailure %u\n"
|
|
"rxfrag %u\n"
|
|
"mcastrxframe %u\n"
|
|
"fcserror %u\n"
|
|
"txframe %u\n"
|
|
"wepicverrcnt-1 %u\n"
|
|
"wepicverrcnt-2 %u\n"
|
|
"wepicverrcnt-3 %u\n"
|
|
"wepicverrcnt-4 %u\n"
|
|
"bcn_rcv_cnt %u\n"
|
|
"bcn_miss_cnt %u\n",
|
|
stats.mcast_tx_frame,
|
|
stats.failed,
|
|
stats.retry,
|
|
stats.multi_retry,
|
|
stats.frame_dup,
|
|
stats.rts_success,
|
|
stats.rts_failure,
|
|
stats.ack_failure,
|
|
stats.rx_frag,
|
|
stats.mcast_rx_frame,
|
|
stats.fcs_error,
|
|
stats.tx_frame,
|
|
stats.wep_icv_error[0],
|
|
stats.wep_icv_error[1],
|
|
stats.wep_icv_error[2],
|
|
stats.wep_icv_error[3],
|
|
stats.bcn_rcv_cnt,
|
|
stats.bcn_miss_cnt);
|
|
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
|
|
(unsigned long) p - page);
|
|
|
|
free_and_exit:
|
|
free_page(page);
|
|
return ret;
|
|
}
|
|
|
|
/* Sysfs histogram file read handler.
|
|
*
|
|
* This function is called when the 'histogram' file is opened for reading
|
|
* It prints the following histogram information -
|
|
* - Number of histogram samples
|
|
* - Receive packet number of each rx_rate
|
|
* - Receive packet number of each snr
|
|
* - Receive packet number of each nosie_flr
|
|
* - Receive packet number of each signal streath
|
|
*/
|
|
static ssize_t
|
|
mwifiex_histogram_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *)file->private_data;
|
|
ssize_t ret;
|
|
struct mwifiex_histogram_data *phist_data;
|
|
int i, value;
|
|
unsigned long page = get_zeroed_page(GFP_KERNEL);
|
|
char *p = (char *)page;
|
|
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
if (!priv || !priv->hist_data)
|
|
return -EFAULT;
|
|
phist_data = priv->hist_data;
|
|
|
|
p += sprintf(p, "\n"
|
|
"total samples = %d\n",
|
|
atomic_read(&phist_data->num_samples));
|
|
|
|
p += sprintf(p,
|
|
"rx rates (in Mbps): 0=1M 1=2M 2=5.5M 3=11M 4=6M 5=9M 6=12M\n"
|
|
"7=18M 8=24M 9=36M 10=48M 11=54M 12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n");
|
|
|
|
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) {
|
|
p += sprintf(p,
|
|
"44-53=MCS0-9(VHT:BW20) 54-63=MCS0-9(VHT:BW40) 64-73=MCS0-9(VHT:BW80)\n\n");
|
|
} else {
|
|
p += sprintf(p, "\n");
|
|
}
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_RX_RATES; i++) {
|
|
value = atomic_read(&phist_data->rx_rate[i]);
|
|
if (value)
|
|
p += sprintf(p, "rx_rate[%02d] = %d\n", i, value);
|
|
}
|
|
|
|
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) {
|
|
for (i = MWIFIEX_MAX_RX_RATES; i < MWIFIEX_MAX_AC_RX_RATES;
|
|
i++) {
|
|
value = atomic_read(&phist_data->rx_rate[i]);
|
|
if (value)
|
|
p += sprintf(p, "rx_rate[%02d] = %d\n",
|
|
i, value);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_SNR; i++) {
|
|
value = atomic_read(&phist_data->snr[i]);
|
|
if (value)
|
|
p += sprintf(p, "snr[%02ddB] = %d\n", i, value);
|
|
}
|
|
for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) {
|
|
value = atomic_read(&phist_data->noise_flr[i]);
|
|
if (value)
|
|
p += sprintf(p, "noise_flr[%02ddBm] = %d\n",
|
|
(int)(i-128), value);
|
|
}
|
|
for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) {
|
|
value = atomic_read(&phist_data->sig_str[i]);
|
|
if (value)
|
|
p += sprintf(p, "sig_strength[-%02ddBm] = %d\n",
|
|
i, value);
|
|
}
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page,
|
|
(unsigned long)p - page);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t
|
|
mwifiex_histogram_write(struct file *file, const char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
|
|
if (priv && priv->hist_data)
|
|
mwifiex_hist_data_reset(priv);
|
|
return 0;
|
|
}
|
|
|
|
static struct mwifiex_debug_info info;
|
|
|
|
/*
|
|
* Proc debug file read handler.
|
|
*
|
|
* This function is called when the 'debug' file is opened for reading
|
|
* It prints the following log information -
|
|
* - Interrupt count
|
|
* - WMM AC VO packets count
|
|
* - WMM AC VI packets count
|
|
* - WMM AC BE packets count
|
|
* - WMM AC BK packets count
|
|
* - Maximum Tx buffer size
|
|
* - Tx buffer size
|
|
* - Current Tx buffer size
|
|
* - Power Save mode
|
|
* - Power Save state
|
|
* - Deep Sleep status
|
|
* - Device wakeup required status
|
|
* - Number of wakeup tries
|
|
* - Host Sleep configured status
|
|
* - Host Sleep activated status
|
|
* - Number of Tx timeouts
|
|
* - Number of command timeouts
|
|
* - Last timed out command ID
|
|
* - Last timed out command action
|
|
* - Last command ID
|
|
* - Last command action
|
|
* - Last command index
|
|
* - Last command response ID
|
|
* - Last command response index
|
|
* - Last event
|
|
* - Last event index
|
|
* - Number of host to card command failures
|
|
* - Number of sleep confirm command failures
|
|
* - Number of host to card data failure
|
|
* - Number of deauthentication events
|
|
* - Number of disassociation events
|
|
* - Number of link lost events
|
|
* - Number of deauthentication commands
|
|
* - Number of association success commands
|
|
* - Number of association failure commands
|
|
* - Number of commands sent
|
|
* - Number of data packets sent
|
|
* - Number of command responses received
|
|
* - Number of events received
|
|
* - Tx BA stream table (TID, RA)
|
|
* - Rx reorder table (TID, TA, Start window, Window size, Buffer)
|
|
*/
|
|
static ssize_t
|
|
mwifiex_debug_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *) file->private_data;
|
|
unsigned long page = get_zeroed_page(GFP_KERNEL);
|
|
char *p = (char *) page;
|
|
ssize_t ret;
|
|
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
ret = mwifiex_get_debug_info(priv, &info);
|
|
if (ret)
|
|
goto free_and_exit;
|
|
|
|
p += mwifiex_debug_info_to_buffer(priv, p, &info);
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
|
|
(unsigned long) p - page);
|
|
|
|
free_and_exit:
|
|
free_page(page);
|
|
return ret;
|
|
}
|
|
|
|
static u32 saved_reg_type, saved_reg_offset, saved_reg_value;
|
|
|
|
/*
|
|
* Proc regrdwr file write handler.
|
|
*
|
|
* This function is called when the 'regrdwr' file is opened for writing
|
|
*
|
|
* This function can be used to write to a register.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_regrdwr_write(struct file *file,
|
|
const char __user *ubuf, size_t count, loff_t *ppos)
|
|
{
|
|
char *buf;
|
|
int ret;
|
|
u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX;
|
|
|
|
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value);
|
|
|
|
if (reg_type == 0 || reg_offset == 0) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
} else {
|
|
saved_reg_type = reg_type;
|
|
saved_reg_offset = reg_offset;
|
|
saved_reg_value = reg_value;
|
|
ret = count;
|
|
}
|
|
done:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Proc regrdwr file read handler.
|
|
*
|
|
* This function is called when the 'regrdwr' file is opened for reading
|
|
*
|
|
* This function can be used to read from a register.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_regrdwr_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *) file->private_data;
|
|
unsigned long addr = get_zeroed_page(GFP_KERNEL);
|
|
char *buf = (char *) addr;
|
|
int pos = 0, ret = 0;
|
|
u32 reg_value;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
if (!saved_reg_type) {
|
|
/* No command has been given */
|
|
pos += snprintf(buf, PAGE_SIZE, "0");
|
|
goto done;
|
|
}
|
|
/* Set command has been given */
|
|
if (saved_reg_value != UINT_MAX) {
|
|
ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset,
|
|
saved_reg_value);
|
|
|
|
pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n",
|
|
saved_reg_type, saved_reg_offset,
|
|
saved_reg_value);
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
|
|
goto done;
|
|
}
|
|
/* Get command has been given */
|
|
ret = mwifiex_reg_read(priv, saved_reg_type,
|
|
saved_reg_offset, ®_value);
|
|
if (ret) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type,
|
|
saved_reg_offset, reg_value);
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
|
|
done:
|
|
free_page(addr);
|
|
return ret;
|
|
}
|
|
|
|
/* Proc debug_mask file read handler.
|
|
* This function is called when the 'debug_mask' file is opened for reading
|
|
* This function can be used read driver debugging mask value.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_debug_mask_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *)file->private_data;
|
|
unsigned long page = get_zeroed_page(GFP_KERNEL);
|
|
char *buf = (char *)page;
|
|
size_t ret = 0;
|
|
int pos = 0;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
pos += snprintf(buf, PAGE_SIZE, "debug mask=0x%08x\n",
|
|
priv->adapter->debug_mask);
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
|
|
free_page(page);
|
|
return ret;
|
|
}
|
|
|
|
/* Proc debug_mask file read handler.
|
|
* This function is called when the 'debug_mask' file is opened for reading
|
|
* This function can be used read driver debugging mask value.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_debug_mask_write(struct file *file, const char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
int ret;
|
|
unsigned long debug_mask;
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
char *buf;
|
|
|
|
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
if (kstrtoul(buf, 0, &debug_mask)) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
priv->adapter->debug_mask = debug_mask;
|
|
ret = count;
|
|
done:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/* debugfs verext file write handler.
|
|
* This function is called when the 'verext' file is opened for write
|
|
*/
|
|
static ssize_t
|
|
mwifiex_verext_write(struct file *file, const char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
int ret;
|
|
u32 versionstrsel;
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
char buf[16];
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
|
|
return -EFAULT;
|
|
|
|
ret = kstrtou32(buf, 10, &versionstrsel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->versionstrsel = versionstrsel;
|
|
|
|
return count;
|
|
}
|
|
|
|
/* Proc verext file read handler.
|
|
* This function is called when the 'verext' file is opened for reading
|
|
* This function can be used read driver exteneed verion string.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_verext_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *)file->private_data;
|
|
char buf[256];
|
|
int ret;
|
|
|
|
mwifiex_get_ver_ext(priv, priv->versionstrsel);
|
|
ret = snprintf(buf, sizeof(buf), "version string: %s\n",
|
|
priv->version_str);
|
|
|
|
return simple_read_from_buffer(ubuf, count, ppos, buf, ret);
|
|
}
|
|
|
|
/* Proc memrw file write handler.
|
|
* This function is called when the 'memrw' file is opened for writing
|
|
* This function can be used to write to a memory location.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_memrw_write(struct file *file, const char __user *ubuf, size_t count,
|
|
loff_t *ppos)
|
|
{
|
|
int ret;
|
|
char cmd;
|
|
struct mwifiex_ds_mem_rw mem_rw;
|
|
u16 cmd_action;
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
char *buf;
|
|
|
|
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
ret = sscanf(buf, "%c %x %x", &cmd, &mem_rw.addr, &mem_rw.value);
|
|
if (ret != 3) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
if ((cmd == 'r') || (cmd == 'R')) {
|
|
cmd_action = HostCmd_ACT_GEN_GET;
|
|
mem_rw.value = 0;
|
|
} else if ((cmd == 'w') || (cmd == 'W')) {
|
|
cmd_action = HostCmd_ACT_GEN_SET;
|
|
} else {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
memcpy(&priv->mem_rw, &mem_rw, sizeof(mem_rw));
|
|
if (mwifiex_send_cmd(priv, HostCmd_CMD_MEM_ACCESS, cmd_action, 0,
|
|
&mem_rw, true))
|
|
ret = -1;
|
|
else
|
|
ret = count;
|
|
|
|
done:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/* Proc memrw file read handler.
|
|
* This function is called when the 'memrw' file is opened for reading
|
|
* This function can be used to read from a memory location.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_memrw_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
unsigned long addr = get_zeroed_page(GFP_KERNEL);
|
|
char *buf = (char *)addr;
|
|
int ret, pos = 0;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
pos += snprintf(buf, PAGE_SIZE, "0x%x 0x%x\n", priv->mem_rw.addr,
|
|
priv->mem_rw.value);
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
|
|
free_page(addr);
|
|
return ret;
|
|
}
|
|
|
|
static u32 saved_offset = -1, saved_bytes = -1;
|
|
|
|
/*
|
|
* Proc rdeeprom file write handler.
|
|
*
|
|
* This function is called when the 'rdeeprom' file is opened for writing
|
|
*
|
|
* This function can be used to write to a RDEEPROM location.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_rdeeprom_write(struct file *file,
|
|
const char __user *ubuf, size_t count, loff_t *ppos)
|
|
{
|
|
char *buf;
|
|
int ret = 0;
|
|
int offset = -1, bytes = -1;
|
|
|
|
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
sscanf(buf, "%d %d", &offset, &bytes);
|
|
|
|
if (offset == -1 || bytes == -1) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
} else {
|
|
saved_offset = offset;
|
|
saved_bytes = bytes;
|
|
ret = count;
|
|
}
|
|
done:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Proc rdeeprom read write handler.
|
|
*
|
|
* This function is called when the 'rdeeprom' file is opened for reading
|
|
*
|
|
* This function can be used to read from a RDEEPROM location.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_rdeeprom_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv =
|
|
(struct mwifiex_private *) file->private_data;
|
|
unsigned long addr = get_zeroed_page(GFP_KERNEL);
|
|
char *buf = (char *) addr;
|
|
int pos, ret, i;
|
|
u8 value[MAX_EEPROM_DATA];
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
if (saved_offset == -1) {
|
|
/* No command has been given */
|
|
pos = snprintf(buf, PAGE_SIZE, "0");
|
|
goto done;
|
|
}
|
|
|
|
/* Get command has been given */
|
|
ret = mwifiex_eeprom_read(priv, (u16) saved_offset,
|
|
(u16) saved_bytes, value);
|
|
if (ret) {
|
|
ret = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
pos = snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes);
|
|
|
|
for (i = 0; i < saved_bytes; i++)
|
|
pos += scnprintf(buf + pos, PAGE_SIZE - pos, "%d ", value[i]);
|
|
|
|
done:
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
out_free:
|
|
free_page(addr);
|
|
return ret;
|
|
}
|
|
|
|
/* Proc hscfg file write handler
|
|
* This function can be used to configure the host sleep parameters.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_hscfg_write(struct file *file, const char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
char *buf;
|
|
int ret, arg_num;
|
|
struct mwifiex_ds_hs_cfg hscfg;
|
|
int conditions = HS_CFG_COND_DEF;
|
|
u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF;
|
|
|
|
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap);
|
|
|
|
memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg));
|
|
|
|
if (arg_num > 3) {
|
|
mwifiex_dbg(priv->adapter, ERROR,
|
|
"Too many arguments\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
if (arg_num >= 1 && arg_num < 3)
|
|
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
|
|
MWIFIEX_SYNC_CMD, &hscfg);
|
|
|
|
if (arg_num) {
|
|
if (conditions == HS_CFG_CANCEL) {
|
|
mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD);
|
|
ret = count;
|
|
goto done;
|
|
}
|
|
hscfg.conditions = conditions;
|
|
}
|
|
if (arg_num >= 2)
|
|
hscfg.gpio = gpio;
|
|
if (arg_num == 3)
|
|
hscfg.gap = gap;
|
|
|
|
hscfg.is_invoke_hostcmd = false;
|
|
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
|
|
MWIFIEX_SYNC_CMD, &hscfg);
|
|
|
|
mwifiex_enable_hs(priv->adapter);
|
|
clear_bit(MWIFIEX_IS_HS_ENABLING, &priv->adapter->work_flags);
|
|
ret = count;
|
|
done:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/* Proc hscfg file read handler
|
|
* This function can be used to read host sleep configuration
|
|
* parameters from driver.
|
|
*/
|
|
static ssize_t
|
|
mwifiex_hscfg_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = (void *)file->private_data;
|
|
unsigned long addr = get_zeroed_page(GFP_KERNEL);
|
|
char *buf = (char *)addr;
|
|
int pos, ret;
|
|
struct mwifiex_ds_hs_cfg hscfg;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
|
|
MWIFIEX_SYNC_CMD, &hscfg);
|
|
|
|
pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions,
|
|
hscfg.gpio, hscfg.gap);
|
|
|
|
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
|
|
|
|
free_page(addr);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t
|
|
mwifiex_timeshare_coex_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = file->private_data;
|
|
char buf[3];
|
|
bool timeshare_coex;
|
|
int ret;
|
|
unsigned int len;
|
|
|
|
if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX,
|
|
HostCmd_ACT_GEN_GET, 0, ×hare_coex, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
len = sprintf(buf, "%d\n", timeshare_coex);
|
|
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
|
|
}
|
|
|
|
static ssize_t
|
|
mwifiex_timeshare_coex_write(struct file *file, const char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
bool timeshare_coex;
|
|
struct mwifiex_private *priv = file->private_data;
|
|
char kbuf[16];
|
|
int ret;
|
|
|
|
if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15)
|
|
return -EOPNOTSUPP;
|
|
|
|
memset(kbuf, 0, sizeof(kbuf));
|
|
|
|
if (copy_from_user(&kbuf, ubuf, min_t(size_t, sizeof(kbuf) - 1, count)))
|
|
return -EFAULT;
|
|
|
|
if (kstrtobool(kbuf, ×hare_coex))
|
|
return -EINVAL;
|
|
|
|
ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX,
|
|
HostCmd_ACT_GEN_SET, 0, ×hare_coex, true);
|
|
if (ret)
|
|
return ret;
|
|
else
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
mwifiex_reset_write(struct file *file,
|
|
const char __user *ubuf, size_t count, loff_t *ppos)
|
|
{
|
|
struct mwifiex_private *priv = file->private_data;
|
|
struct mwifiex_adapter *adapter = priv->adapter;
|
|
bool result;
|
|
int rc;
|
|
|
|
rc = kstrtobool_from_user(ubuf, count, &result);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (!result)
|
|
return -EINVAL;
|
|
|
|
if (adapter->if_ops.card_reset) {
|
|
dev_info(adapter->dev, "Resetting per request\n");
|
|
adapter->if_ops.card_reset(adapter);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
#define MWIFIEX_DFS_ADD_FILE(name) do { \
|
|
debugfs_create_file(#name, 0644, priv->dfs_dev_dir, priv, \
|
|
&mwifiex_dfs_##name##_fops); \
|
|
} while (0);
|
|
|
|
#define MWIFIEX_DFS_FILE_OPS(name) \
|
|
static const struct file_operations mwifiex_dfs_##name##_fops = { \
|
|
.read = mwifiex_##name##_read, \
|
|
.write = mwifiex_##name##_write, \
|
|
.open = simple_open, \
|
|
};
|
|
|
|
#define MWIFIEX_DFS_FILE_READ_OPS(name) \
|
|
static const struct file_operations mwifiex_dfs_##name##_fops = { \
|
|
.read = mwifiex_##name##_read, \
|
|
.open = simple_open, \
|
|
};
|
|
|
|
#define MWIFIEX_DFS_FILE_WRITE_OPS(name) \
|
|
static const struct file_operations mwifiex_dfs_##name##_fops = { \
|
|
.write = mwifiex_##name##_write, \
|
|
.open = simple_open, \
|
|
};
|
|
|
|
|
|
MWIFIEX_DFS_FILE_READ_OPS(info);
|
|
MWIFIEX_DFS_FILE_READ_OPS(debug);
|
|
MWIFIEX_DFS_FILE_READ_OPS(getlog);
|
|
MWIFIEX_DFS_FILE_OPS(regrdwr);
|
|
MWIFIEX_DFS_FILE_OPS(rdeeprom);
|
|
MWIFIEX_DFS_FILE_OPS(memrw);
|
|
MWIFIEX_DFS_FILE_OPS(hscfg);
|
|
MWIFIEX_DFS_FILE_OPS(histogram);
|
|
MWIFIEX_DFS_FILE_OPS(debug_mask);
|
|
MWIFIEX_DFS_FILE_OPS(timeshare_coex);
|
|
MWIFIEX_DFS_FILE_WRITE_OPS(reset);
|
|
MWIFIEX_DFS_FILE_OPS(verext);
|
|
|
|
/*
|
|
* This function creates the debug FS directory structure and the files.
|
|
*/
|
|
void
|
|
mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
|
|
{
|
|
if (!mwifiex_dfs_dir || !priv)
|
|
return;
|
|
|
|
priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
|
|
mwifiex_dfs_dir);
|
|
|
|
if (!priv->dfs_dev_dir)
|
|
return;
|
|
|
|
MWIFIEX_DFS_ADD_FILE(info);
|
|
MWIFIEX_DFS_ADD_FILE(debug);
|
|
MWIFIEX_DFS_ADD_FILE(getlog);
|
|
MWIFIEX_DFS_ADD_FILE(regrdwr);
|
|
MWIFIEX_DFS_ADD_FILE(rdeeprom);
|
|
|
|
MWIFIEX_DFS_ADD_FILE(memrw);
|
|
MWIFIEX_DFS_ADD_FILE(hscfg);
|
|
MWIFIEX_DFS_ADD_FILE(histogram);
|
|
MWIFIEX_DFS_ADD_FILE(debug_mask);
|
|
MWIFIEX_DFS_ADD_FILE(timeshare_coex);
|
|
MWIFIEX_DFS_ADD_FILE(reset);
|
|
MWIFIEX_DFS_ADD_FILE(verext);
|
|
}
|
|
|
|
/*
|
|
* This function removes the debug FS directory structure and the files.
|
|
*/
|
|
void
|
|
mwifiex_dev_debugfs_remove(struct mwifiex_private *priv)
|
|
{
|
|
if (!priv)
|
|
return;
|
|
|
|
debugfs_remove_recursive(priv->dfs_dev_dir);
|
|
}
|
|
|
|
/*
|
|
* This function creates the top level proc directory.
|
|
*/
|
|
void
|
|
mwifiex_debugfs_init(void)
|
|
{
|
|
if (!mwifiex_dfs_dir)
|
|
mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL);
|
|
}
|
|
|
|
/*
|
|
* This function removes the top level proc directory.
|
|
*/
|
|
void
|
|
mwifiex_debugfs_remove(void)
|
|
{
|
|
debugfs_remove(mwifiex_dfs_dir);
|
|
}
|