494 lines
11 KiB
C
494 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/iio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include "../thermal_hwmon.h"
|
|
|
|
#define QPNP_TM_REG_DIG_MAJOR 0x01
|
|
#define QPNP_TM_REG_TYPE 0x04
|
|
#define QPNP_TM_REG_SUBTYPE 0x05
|
|
#define QPNP_TM_REG_STATUS 0x08
|
|
#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40
|
|
#define QPNP_TM_REG_ALARM_CTRL 0x46
|
|
|
|
#define QPNP_TM_TYPE 0x09
|
|
#define QPNP_TM_SUBTYPE_GEN1 0x08
|
|
#define QPNP_TM_SUBTYPE_GEN2 0x09
|
|
|
|
#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0)
|
|
#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
|
|
#define STATUS_GEN2_STATE_SHIFT 4
|
|
|
|
#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6)
|
|
#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
|
|
|
|
#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3)
|
|
|
|
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
|
|
|
|
#define THRESH_COUNT 4
|
|
#define STAGE_COUNT 3
|
|
|
|
/* Over-temperature trip point values in mC */
|
|
static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
|
|
{ 105000, 125000, 145000 },
|
|
{ 110000, 130000, 150000 },
|
|
{ 115000, 135000, 155000 },
|
|
{ 120000, 140000, 160000 },
|
|
};
|
|
|
|
static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
|
|
{ 90000, 110000, 140000 },
|
|
{ 95000, 115000, 145000 },
|
|
{ 100000, 120000, 150000 },
|
|
{ 105000, 125000, 155000 },
|
|
};
|
|
|
|
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
|
|
|
|
#define THRESH_MIN 0
|
|
#define THRESH_MAX 3
|
|
|
|
#define TEMP_STAGE_HYSTERESIS 2000
|
|
|
|
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
|
|
#define DEFAULT_TEMP 37000
|
|
|
|
struct qpnp_tm_chip {
|
|
struct regmap *map;
|
|
struct device *dev;
|
|
struct thermal_zone_device *tz_dev;
|
|
unsigned int subtype;
|
|
long temp;
|
|
unsigned int thresh;
|
|
unsigned int stage;
|
|
unsigned int prev_stage;
|
|
unsigned int base;
|
|
/* protects .thresh, .stage and chip registers */
|
|
struct mutex lock;
|
|
bool initialized;
|
|
|
|
struct iio_channel *adc;
|
|
const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
|
|
};
|
|
|
|
/* This array maps from GEN2 alarm state to GEN1 alarm stage */
|
|
static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
|
|
|
|
static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(chip->map, chip->base + addr, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*data = val;
|
|
return 0;
|
|
}
|
|
|
|
static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
|
|
{
|
|
return regmap_write(chip->map, chip->base + addr, data);
|
|
}
|
|
|
|
/**
|
|
* qpnp_tm_decode_temp() - return temperature in mC corresponding to the
|
|
* specified over-temperature stage
|
|
* @chip: Pointer to the qpnp_tm chip
|
|
* @stage: Over-temperature stage
|
|
*
|
|
* Return: temperature in mC
|
|
*/
|
|
static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
|
|
{
|
|
if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
|
|
stage > STAGE_COUNT)
|
|
return 0;
|
|
|
|
return (*chip->temp_map)[chip->thresh][stage - 1];
|
|
}
|
|
|
|
/**
|
|
* qpnp_tm_get_temp_stage() - return over-temperature stage
|
|
* @chip: Pointer to the qpnp_tm chip
|
|
*
|
|
* Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
|
|
*/
|
|
static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
|
|
{
|
|
int ret;
|
|
u8 reg = 0;
|
|
|
|
ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
|
|
ret = reg & STATUS_GEN1_STAGE_MASK;
|
|
else
|
|
ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function updates the internal temp value based on the
|
|
* current thermal stage and threshold as well as the previous stage
|
|
*/
|
|
static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
|
|
{
|
|
unsigned int stage, stage_new, stage_old;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&chip->lock));
|
|
|
|
ret = qpnp_tm_get_temp_stage(chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
stage = ret;
|
|
|
|
if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
|
|
stage_new = stage;
|
|
stage_old = chip->stage;
|
|
} else {
|
|
stage_new = alarm_state_map[stage];
|
|
stage_old = alarm_state_map[chip->stage];
|
|
}
|
|
|
|
if (stage_new > stage_old) {
|
|
/* increasing stage, use lower bound */
|
|
chip->temp = qpnp_tm_decode_temp(chip, stage_new)
|
|
+ TEMP_STAGE_HYSTERESIS;
|
|
} else if (stage_new < stage_old) {
|
|
/* decreasing stage, use upper bound */
|
|
chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
|
|
- TEMP_STAGE_HYSTERESIS;
|
|
}
|
|
|
|
chip->stage = stage;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
|
|
{
|
|
struct qpnp_tm_chip *chip = tz->devdata;
|
|
int ret, mili_celsius;
|
|
|
|
if (!temp)
|
|
return -EINVAL;
|
|
|
|
if (!chip->initialized) {
|
|
*temp = DEFAULT_TEMP;
|
|
return 0;
|
|
}
|
|
|
|
if (!chip->adc) {
|
|
mutex_lock(&chip->lock);
|
|
ret = qpnp_tm_update_temp_no_adc(chip);
|
|
mutex_unlock(&chip->lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = iio_read_channel_processed(chip->adc, &mili_celsius);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
chip->temp = mili_celsius;
|
|
}
|
|
|
|
*temp = chip->temp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
|
|
int temp)
|
|
{
|
|
long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
|
|
long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
|
|
bool disable_s2_shutdown = false;
|
|
u8 reg;
|
|
|
|
WARN_ON(!mutex_is_locked(&chip->lock));
|
|
|
|
/*
|
|
* Default: S2 and S3 shutdown enabled, thresholds at
|
|
* lowest threshold set, monitoring at 25Hz
|
|
*/
|
|
reg = SHUTDOWN_CTRL1_RATE_25HZ;
|
|
|
|
if (temp == THERMAL_TEMP_INVALID ||
|
|
temp < stage2_threshold_min) {
|
|
chip->thresh = THRESH_MIN;
|
|
goto skip;
|
|
}
|
|
|
|
if (temp <= stage2_threshold_max) {
|
|
chip->thresh = THRESH_MAX -
|
|
((stage2_threshold_max - temp) /
|
|
TEMP_THRESH_STEP);
|
|
disable_s2_shutdown = true;
|
|
} else {
|
|
chip->thresh = THRESH_MAX;
|
|
|
|
if (chip->adc)
|
|
disable_s2_shutdown = true;
|
|
else
|
|
dev_warn(chip->dev,
|
|
"No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
|
|
temp, stage2_threshold_max, stage2_threshold_max);
|
|
}
|
|
|
|
skip:
|
|
reg |= chip->thresh;
|
|
if (disable_s2_shutdown)
|
|
reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
|
|
|
|
return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
|
|
}
|
|
|
|
static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip_id, int temp)
|
|
{
|
|
struct qpnp_tm_chip *chip = tz->devdata;
|
|
struct thermal_trip trip;
|
|
int ret;
|
|
|
|
ret = __thermal_zone_get_trip(chip->tz_dev, trip_id, &trip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (trip.type != THERMAL_TRIP_CRITICAL)
|
|
return 0;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = qpnp_tm_update_critical_trip_temp(chip, temp);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = {
|
|
.get_temp = qpnp_tm_get_temp,
|
|
.set_trip_temp = qpnp_tm_set_trip_temp,
|
|
};
|
|
|
|
static irqreturn_t qpnp_tm_isr(int irq, void *data)
|
|
{
|
|
struct qpnp_tm_chip *chip = data;
|
|
|
|
thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
|
|
{
|
|
struct thermal_trip trip;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < thermal_zone_get_num_trips(chip->tz_dev); i++) {
|
|
|
|
ret = thermal_zone_get_trip(chip->tz_dev, i, &trip);
|
|
if (ret)
|
|
continue;
|
|
|
|
if (trip.type == THERMAL_TRIP_CRITICAL)
|
|
return trip.temperature;
|
|
}
|
|
|
|
return THERMAL_TEMP_INVALID;
|
|
}
|
|
|
|
/*
|
|
* This function initializes the internal temp value based on only the
|
|
* current thermal stage and threshold. Setup threshold control and
|
|
* disable shutdown override.
|
|
*/
|
|
static int qpnp_tm_init(struct qpnp_tm_chip *chip)
|
|
{
|
|
unsigned int stage;
|
|
int ret;
|
|
u8 reg = 0;
|
|
int crit_temp;
|
|
|
|
mutex_lock(&chip->lock);
|
|
|
|
ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
|
|
chip->temp = DEFAULT_TEMP;
|
|
|
|
ret = qpnp_tm_get_temp_stage(chip);
|
|
if (ret < 0)
|
|
goto out;
|
|
chip->stage = ret;
|
|
|
|
stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
|
|
? chip->stage : alarm_state_map[chip->stage];
|
|
|
|
if (stage)
|
|
chip->temp = qpnp_tm_decode_temp(chip, stage);
|
|
|
|
mutex_unlock(&chip->lock);
|
|
|
|
crit_temp = qpnp_tm_get_critical_trip_temp(chip);
|
|
|
|
mutex_lock(&chip->lock);
|
|
|
|
ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Enable the thermal alarm PMIC module in always-on mode. */
|
|
reg = ALARM_CTRL_FORCE_ENABLE;
|
|
ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
|
|
|
|
chip->initialized = true;
|
|
|
|
out:
|
|
mutex_unlock(&chip->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int qpnp_tm_probe(struct platform_device *pdev)
|
|
{
|
|
struct qpnp_tm_chip *chip;
|
|
struct device_node *node;
|
|
u8 type, subtype, dig_major;
|
|
u32 res;
|
|
int ret, irq;
|
|
|
|
node = pdev->dev.of_node;
|
|
|
|
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&pdev->dev, chip);
|
|
chip->dev = &pdev->dev;
|
|
|
|
mutex_init(&chip->lock);
|
|
|
|
chip->map = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!chip->map)
|
|
return -ENXIO;
|
|
|
|
ret = of_property_read_u32(node, "reg", &res);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
/* ADC based measurements are optional */
|
|
chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
|
|
if (IS_ERR(chip->adc)) {
|
|
ret = PTR_ERR(chip->adc);
|
|
chip->adc = NULL;
|
|
if (ret == -EPROBE_DEFER)
|
|
return ret;
|
|
}
|
|
|
|
chip->base = res;
|
|
|
|
ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "could not read type\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "could not read subtype\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "could not read dig_major\n");
|
|
return ret;
|
|
}
|
|
|
|
if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
|
|
&& subtype != QPNP_TM_SUBTYPE_GEN2)) {
|
|
dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
|
|
type, subtype);
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip->subtype = subtype;
|
|
if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
|
|
chip->temp_map = &temp_map_gen2_v1;
|
|
else
|
|
chip->temp_map = &temp_map_gen1;
|
|
|
|
/*
|
|
* Register the sensor before initializing the hardware to be able to
|
|
* read the trip points. get_temp() returns the default temperature
|
|
* before the hardware initialization is completed.
|
|
*/
|
|
chip->tz_dev = devm_thermal_of_zone_register(
|
|
&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
|
|
if (IS_ERR(chip->tz_dev)) {
|
|
dev_err(&pdev->dev, "failed to register sensor\n");
|
|
return PTR_ERR(chip->tz_dev);
|
|
}
|
|
|
|
ret = qpnp_tm_init(chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "init failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
|
|
dev_warn(&pdev->dev,
|
|
"Failed to add hwmon sysfs attributes\n");
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
|
|
IRQF_ONESHOT, node->name, chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id qpnp_tm_match_table[] = {
|
|
{ .compatible = "qcom,spmi-temp-alarm" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
|
|
|
|
static struct platform_driver qpnp_tm_driver = {
|
|
.driver = {
|
|
.name = "spmi-temp-alarm",
|
|
.of_match_table = qpnp_tm_match_table,
|
|
},
|
|
.probe = qpnp_tm_probe,
|
|
};
|
|
module_platform_driver(qpnp_tm_driver);
|
|
|
|
MODULE_ALIAS("platform:spmi-temp-alarm");
|
|
MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
|
|
MODULE_LICENSE("GPL v2");
|