329 lines
8.0 KiB
C
329 lines
8.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dwc3-am62.c - TI specific Glue layer for AM62 DWC3 USB Controller
|
|
*
|
|
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
/* USB WRAPPER register offsets */
|
|
#define USBSS_PID 0x0
|
|
#define USBSS_OVERCURRENT_CTRL 0x4
|
|
#define USBSS_PHY_CONFIG 0x8
|
|
#define USBSS_PHY_TEST 0xc
|
|
#define USBSS_CORE_STAT 0x14
|
|
#define USBSS_HOST_VBUS_CTRL 0x18
|
|
#define USBSS_MODE_CONTROL 0x1c
|
|
#define USBSS_WAKEUP_CONFIG 0x30
|
|
#define USBSS_WAKEUP_STAT 0x34
|
|
#define USBSS_OVERRIDE_CONFIG 0x38
|
|
#define USBSS_IRQ_MISC_STATUS_RAW 0x430
|
|
#define USBSS_IRQ_MISC_STATUS 0x434
|
|
#define USBSS_IRQ_MISC_ENABLE_SET 0x438
|
|
#define USBSS_IRQ_MISC_ENABLE_CLR 0x43c
|
|
#define USBSS_IRQ_MISC_EOI 0x440
|
|
#define USBSS_INTR_TEST 0x490
|
|
#define USBSS_VBUS_FILTER 0x614
|
|
#define USBSS_VBUS_STAT 0x618
|
|
#define USBSS_DEBUG_CFG 0x708
|
|
#define USBSS_DEBUG_DATA 0x70c
|
|
#define USBSS_HOST_HUB_CTRL 0x714
|
|
|
|
/* PHY CONFIG register bits */
|
|
#define USBSS_PHY_VBUS_SEL_MASK GENMASK(2, 1)
|
|
#define USBSS_PHY_VBUS_SEL_SHIFT 1
|
|
#define USBSS_PHY_LANE_REVERSE BIT(0)
|
|
|
|
/* MODE CONTROL register bits */
|
|
#define USBSS_MODE_VALID BIT(0)
|
|
|
|
/* WAKEUP CONFIG register bits */
|
|
#define USBSS_WAKEUP_CFG_OVERCURRENT_EN BIT(3)
|
|
#define USBSS_WAKEUP_CFG_LINESTATE_EN BIT(2)
|
|
#define USBSS_WAKEUP_CFG_SESSVALID_EN BIT(1)
|
|
#define USBSS_WAKEUP_CFG_VBUSVALID_EN BIT(0)
|
|
|
|
/* WAKEUP STAT register bits */
|
|
#define USBSS_WAKEUP_STAT_OVERCURRENT BIT(4)
|
|
#define USBSS_WAKEUP_STAT_LINESTATE BIT(3)
|
|
#define USBSS_WAKEUP_STAT_SESSVALID BIT(2)
|
|
#define USBSS_WAKEUP_STAT_VBUSVALID BIT(1)
|
|
#define USBSS_WAKEUP_STAT_CLR BIT(0)
|
|
|
|
/* IRQ_MISC_STATUS_RAW register bits */
|
|
#define USBSS_IRQ_MISC_RAW_VBUSVALID BIT(22)
|
|
#define USBSS_IRQ_MISC_RAW_SESSVALID BIT(20)
|
|
|
|
/* IRQ_MISC_STATUS register bits */
|
|
#define USBSS_IRQ_MISC_VBUSVALID BIT(22)
|
|
#define USBSS_IRQ_MISC_SESSVALID BIT(20)
|
|
|
|
/* IRQ_MISC_ENABLE_SET register bits */
|
|
#define USBSS_IRQ_MISC_ENABLE_SET_VBUSVALID BIT(22)
|
|
#define USBSS_IRQ_MISC_ENABLE_SET_SESSVALID BIT(20)
|
|
|
|
/* IRQ_MISC_ENABLE_CLR register bits */
|
|
#define USBSS_IRQ_MISC_ENABLE_CLR_VBUSVALID BIT(22)
|
|
#define USBSS_IRQ_MISC_ENABLE_CLR_SESSVALID BIT(20)
|
|
|
|
/* IRQ_MISC_EOI register bits */
|
|
#define USBSS_IRQ_MISC_EOI_VECTOR BIT(0)
|
|
|
|
/* VBUS_STAT register bits */
|
|
#define USBSS_VBUS_STAT_SESSVALID BIT(2)
|
|
#define USBSS_VBUS_STAT_VBUSVALID BIT(0)
|
|
|
|
/* Mask for PHY PLL REFCLK */
|
|
#define PHY_PLL_REFCLK_MASK GENMASK(3, 0)
|
|
|
|
#define DWC3_AM62_AUTOSUSPEND_DELAY 100
|
|
|
|
struct dwc3_data {
|
|
struct device *dev;
|
|
void __iomem *usbss;
|
|
struct clk *usb2_refclk;
|
|
int rate_code;
|
|
struct regmap *syscon;
|
|
unsigned int offset;
|
|
unsigned int vbus_divider;
|
|
};
|
|
|
|
static const int dwc3_ti_rate_table[] = { /* in KHZ */
|
|
9600,
|
|
10000,
|
|
12000,
|
|
19200,
|
|
20000,
|
|
24000,
|
|
25000,
|
|
26000,
|
|
38400,
|
|
40000,
|
|
58000,
|
|
50000,
|
|
52000,
|
|
};
|
|
|
|
static inline u32 dwc3_ti_readl(struct dwc3_data *data, u32 offset)
|
|
{
|
|
return readl((data->usbss) + offset);
|
|
}
|
|
|
|
static inline void dwc3_ti_writel(struct dwc3_data *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, (data->usbss) + offset);
|
|
}
|
|
|
|
static int phy_syscon_pll_refclk(struct dwc3_data *data)
|
|
{
|
|
struct device *dev = data->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct of_phandle_args args;
|
|
struct regmap *syscon;
|
|
int ret;
|
|
|
|
syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-phy-pll-refclk");
|
|
if (IS_ERR(syscon)) {
|
|
dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
|
|
return PTR_ERR(syscon);
|
|
}
|
|
|
|
data->syscon = syscon;
|
|
|
|
ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1,
|
|
0, &args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->offset = args.args[0];
|
|
|
|
ret = regmap_update_bits(data->syscon, data->offset, PHY_PLL_REFCLK_MASK, data->rate_code);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set phy pll reference clock rate\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ti_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct dwc3_data *data;
|
|
int i, ret;
|
|
unsigned long rate;
|
|
u32 reg;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->dev = dev;
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
data->usbss = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(data->usbss)) {
|
|
dev_err(dev, "can't map IOMEM resource\n");
|
|
return PTR_ERR(data->usbss);
|
|
}
|
|
|
|
data->usb2_refclk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(data->usb2_refclk)) {
|
|
dev_err(dev, "can't get usb2_refclk\n");
|
|
return PTR_ERR(data->usb2_refclk);
|
|
}
|
|
|
|
/* Calculate the rate code */
|
|
rate = clk_get_rate(data->usb2_refclk);
|
|
rate /= 1000; // To KHz
|
|
for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) {
|
|
if (dwc3_ti_rate_table[i] == rate)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(dwc3_ti_rate_table)) {
|
|
dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->rate_code = i;
|
|
|
|
/* Read the syscon property and set the rate code */
|
|
ret = phy_syscon_pll_refclk(data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* VBUS divider select */
|
|
data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
|
|
reg = dwc3_ti_readl(data, USBSS_PHY_CONFIG);
|
|
if (data->vbus_divider)
|
|
reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
|
|
|
|
dwc3_ti_writel(data, USBSS_PHY_CONFIG, reg);
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
/*
|
|
* Don't ignore its dependencies with its children
|
|
*/
|
|
pm_suspend_ignore_children(dev, false);
|
|
clk_prepare_enable(data->usb2_refclk);
|
|
pm_runtime_get_noresume(dev);
|
|
|
|
ret = of_platform_populate(node, NULL, NULL, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create dwc3 core: %d\n", ret);
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
/* Set mode valid bit to indicate role is valid */
|
|
reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
|
|
reg |= USBSS_MODE_VALID;
|
|
dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
|
|
|
|
/* Setting up autosuspend */
|
|
pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
return 0;
|
|
|
|
err_pm_disable:
|
|
clk_disable_unprepare(data->usb2_refclk);
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_ti_remove_core(struct device *dev, void *c)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
platform_device_unregister(pdev);
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ti_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dwc3_data *data = platform_get_drvdata(pdev);
|
|
u32 reg;
|
|
|
|
device_for_each_child(dev, NULL, dwc3_ti_remove_core);
|
|
|
|
/* Clear mode valid bit */
|
|
reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
|
|
reg &= ~USBSS_MODE_VALID;
|
|
dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
|
|
|
|
pm_runtime_put_sync(dev);
|
|
clk_disable_unprepare(data->usb2_refclk);
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int dwc3_ti_suspend_common(struct device *dev)
|
|
{
|
|
struct dwc3_data *data = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(data->usb2_refclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ti_resume_common(struct device *dev)
|
|
{
|
|
struct dwc3_data *data = dev_get_drvdata(dev);
|
|
|
|
clk_prepare_enable(data->usb2_refclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static UNIVERSAL_DEV_PM_OPS(dwc3_ti_pm_ops, dwc3_ti_suspend_common,
|
|
dwc3_ti_resume_common, NULL);
|
|
|
|
#define DEV_PM_OPS (&dwc3_ti_pm_ops)
|
|
#else
|
|
#define DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct of_device_id dwc3_ti_of_match[] = {
|
|
{ .compatible = "ti,am62-usb"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dwc3_ti_of_match);
|
|
|
|
static struct platform_driver dwc3_ti_driver = {
|
|
.probe = dwc3_ti_probe,
|
|
.remove = dwc3_ti_remove,
|
|
.driver = {
|
|
.name = "dwc3-am62",
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = dwc3_ti_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dwc3_ti_driver);
|
|
|
|
MODULE_ALIAS("platform:dwc3-am62");
|
|
MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("DesignWare USB3 TI Glue Layer");
|