328 lines
7.1 KiB
Bash
Executable File
328 lines
7.1 KiB
Bash
Executable File
#!/bin/bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
# +--------------------+ +----------------------+
|
|
# | H1 | | H2 |
|
|
# | | | |
|
|
# | $h1.200 + | | + $h2.200 |
|
|
# | 192.0.2.1/28 | | | | 192.0.2.18/28 |
|
|
# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 |
|
|
# | | | | | |
|
|
# | $h1 + | | + $h2 |
|
|
# | | | | | |
|
|
# +------------------|-+ +-|--------------------+
|
|
# | |
|
|
# +------------------|-------------------------|--------------------+
|
|
# | SW | | |
|
|
# | | | |
|
|
# | $rp1 + + $rp2 |
|
|
# | | | |
|
|
# | $rp1.200 + + $rp2.200 |
|
|
# | 192.0.2.2/28 192.0.2.17/28 |
|
|
# | 2001:db8:1::2/64 2001:db8:2::2/64 |
|
|
# | |
|
|
# +-----------------------------------------------------------------+
|
|
|
|
ALL_TESTS="
|
|
ping_ipv4
|
|
ping_ipv6
|
|
test_stats_rx_ipv4
|
|
test_stats_tx_ipv4
|
|
test_stats_rx_ipv6
|
|
test_stats_tx_ipv6
|
|
respin_enablement
|
|
test_stats_rx_ipv4
|
|
test_stats_tx_ipv4
|
|
test_stats_rx_ipv6
|
|
test_stats_tx_ipv6
|
|
reapply_config
|
|
ping_ipv4
|
|
ping_ipv6
|
|
test_stats_rx_ipv4
|
|
test_stats_tx_ipv4
|
|
test_stats_rx_ipv6
|
|
test_stats_tx_ipv6
|
|
test_stats_report_rx
|
|
test_stats_report_tx
|
|
test_destroy_enabled
|
|
test_double_enable
|
|
"
|
|
NUM_NETIFS=4
|
|
source lib.sh
|
|
|
|
h1_create()
|
|
{
|
|
simple_if_init $h1
|
|
vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64
|
|
ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
|
|
ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
|
|
}
|
|
|
|
h1_destroy()
|
|
{
|
|
ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
|
|
ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
|
|
vlan_destroy $h1 200
|
|
simple_if_fini $h1
|
|
}
|
|
|
|
h2_create()
|
|
{
|
|
simple_if_init $h2
|
|
vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64
|
|
ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
|
|
ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
|
|
}
|
|
|
|
h2_destroy()
|
|
{
|
|
ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
|
|
ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
|
|
vlan_destroy $h2 200
|
|
simple_if_fini $h2
|
|
}
|
|
|
|
router_rp1_200_create()
|
|
{
|
|
ip link add name $rp1.200 link $rp1 type vlan id 200
|
|
ip link set dev $rp1.200 addrgenmode eui64
|
|
ip link set dev $rp1.200 up
|
|
ip address add dev $rp1.200 192.0.2.2/28
|
|
ip address add dev $rp1.200 2001:db8:1::2/64
|
|
ip stats set dev $rp1.200 l3_stats on
|
|
}
|
|
|
|
router_rp1_200_destroy()
|
|
{
|
|
ip stats set dev $rp1.200 l3_stats off
|
|
ip address del dev $rp1.200 2001:db8:1::2/64
|
|
ip address del dev $rp1.200 192.0.2.2/28
|
|
ip link del dev $rp1.200
|
|
}
|
|
|
|
router_create()
|
|
{
|
|
ip link set dev $rp1 up
|
|
router_rp1_200_create
|
|
|
|
ip link set dev $rp2 up
|
|
vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64
|
|
}
|
|
|
|
router_destroy()
|
|
{
|
|
vlan_destroy $rp2 200
|
|
ip link set dev $rp2 down
|
|
|
|
router_rp1_200_destroy
|
|
ip link set dev $rp1 down
|
|
}
|
|
|
|
setup_prepare()
|
|
{
|
|
h1=${NETIFS[p1]}
|
|
rp1=${NETIFS[p2]}
|
|
|
|
rp2=${NETIFS[p3]}
|
|
h2=${NETIFS[p4]}
|
|
|
|
rp1mac=$(mac_get $rp1)
|
|
rp2mac=$(mac_get $rp2)
|
|
|
|
vrf_prepare
|
|
|
|
h1_create
|
|
h2_create
|
|
|
|
router_create
|
|
|
|
forwarding_enable
|
|
}
|
|
|
|
cleanup()
|
|
{
|
|
pre_cleanup
|
|
|
|
forwarding_restore
|
|
|
|
router_destroy
|
|
|
|
h2_destroy
|
|
h1_destroy
|
|
|
|
vrf_cleanup
|
|
}
|
|
|
|
ping_ipv4()
|
|
{
|
|
ping_test $h1.200 192.0.2.18 " IPv4"
|
|
}
|
|
|
|
ping_ipv6()
|
|
{
|
|
ping_test $h1.200 2001:db8:2::1 " IPv6"
|
|
}
|
|
|
|
send_packets_rx_ipv4()
|
|
{
|
|
# Send 21 packets instead of 20, because the first one might trap and go
|
|
# through the SW datapath, which might not bump the HW counter.
|
|
$MZ $h1.200 -c 21 -d 20msec -p 100 \
|
|
-a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \
|
|
-q -t udp sp=54321,dp=12345
|
|
}
|
|
|
|
send_packets_rx_ipv6()
|
|
{
|
|
$MZ $h1.200 -6 -c 21 -d 20msec -p 100 \
|
|
-a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \
|
|
-q -t udp sp=54321,dp=12345
|
|
}
|
|
|
|
send_packets_tx_ipv4()
|
|
{
|
|
$MZ $h2.200 -c 21 -d 20msec -p 100 \
|
|
-a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \
|
|
-q -t udp sp=54321,dp=12345
|
|
}
|
|
|
|
send_packets_tx_ipv6()
|
|
{
|
|
$MZ $h2.200 -6 -c 21 -d 20msec -p 100 \
|
|
-a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \
|
|
-q -t udp sp=54321,dp=12345
|
|
}
|
|
|
|
___test_stats()
|
|
{
|
|
local dir=$1; shift
|
|
local prot=$1; shift
|
|
|
|
local a
|
|
local b
|
|
|
|
a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
|
|
send_packets_${dir}_${prot}
|
|
"$@"
|
|
b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
|
|
hw_stats_get l3_stats $rp1.200 ${dir} packets)
|
|
check_err $? "Traffic not reflected in the counter: $a -> $b"
|
|
}
|
|
|
|
__test_stats()
|
|
{
|
|
local dir=$1; shift
|
|
local prot=$1; shift
|
|
|
|
RET=0
|
|
___test_stats "$dir" "$prot"
|
|
log_test "Test $dir packets: $prot"
|
|
}
|
|
|
|
test_stats_rx_ipv4()
|
|
{
|
|
__test_stats rx ipv4
|
|
}
|
|
|
|
test_stats_tx_ipv4()
|
|
{
|
|
__test_stats tx ipv4
|
|
}
|
|
|
|
test_stats_rx_ipv6()
|
|
{
|
|
__test_stats rx ipv6
|
|
}
|
|
|
|
test_stats_tx_ipv6()
|
|
{
|
|
__test_stats tx ipv6
|
|
}
|
|
|
|
# Make sure everything works well even after stats have been disabled and
|
|
# reenabled on the same device without touching the L3 configuration.
|
|
respin_enablement()
|
|
{
|
|
log_info "Turning stats off and on again"
|
|
ip stats set dev $rp1.200 l3_stats off
|
|
ip stats set dev $rp1.200 l3_stats on
|
|
}
|
|
|
|
# For the initial run, l3_stats is enabled on a completely set up netdevice. Now
|
|
# do it the other way around: enabling the L3 stats on an L2 netdevice, and only
|
|
# then apply the L3 configuration.
|
|
reapply_config()
|
|
{
|
|
log_info "Reapplying configuration"
|
|
|
|
router_rp1_200_destroy
|
|
|
|
ip link add name $rp1.200 link $rp1 type vlan id 200
|
|
ip link set dev $rp1.200 addrgenmode none
|
|
ip stats set dev $rp1.200 l3_stats on
|
|
ip link set dev $rp1.200 addrgenmode eui64
|
|
ip link set dev $rp1.200 up
|
|
ip address add dev $rp1.200 192.0.2.2/28
|
|
ip address add dev $rp1.200 2001:db8:1::2/64
|
|
}
|
|
|
|
__test_stats_report()
|
|
{
|
|
local dir=$1; shift
|
|
local prot=$1; shift
|
|
|
|
local a
|
|
local b
|
|
|
|
RET=0
|
|
|
|
a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
|
|
send_packets_${dir}_${prot}
|
|
ip address flush dev $rp1.200
|
|
b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
|
|
hw_stats_get l3_stats $rp1.200 ${dir} packets)
|
|
check_err $? "Traffic not reflected in the counter: $a -> $b"
|
|
log_test "Test ${dir} packets: stats pushed on loss of L3"
|
|
|
|
ip stats set dev $rp1.200 l3_stats off
|
|
ip link del dev $rp1.200
|
|
router_rp1_200_create
|
|
}
|
|
|
|
test_stats_report_rx()
|
|
{
|
|
__test_stats_report rx ipv4
|
|
}
|
|
|
|
test_stats_report_tx()
|
|
{
|
|
__test_stats_report tx ipv4
|
|
}
|
|
|
|
test_destroy_enabled()
|
|
{
|
|
RET=0
|
|
|
|
ip link del dev $rp1.200
|
|
router_rp1_200_create
|
|
|
|
log_test "Destroy l3_stats-enabled netdev"
|
|
}
|
|
|
|
test_double_enable()
|
|
{
|
|
RET=0
|
|
___test_stats rx ipv4 \
|
|
ip stats set dev $rp1.200 l3_stats on
|
|
log_test "Test stat retention across a spurious enablement"
|
|
}
|
|
|
|
trap cleanup EXIT
|
|
|
|
setup_prepare
|
|
setup_wait
|
|
|
|
tests_run
|
|
|
|
exit $EXIT_STATUS
|