352 lines
7.4 KiB
Plaintext
352 lines
7.4 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* Device Tree for ARC HS Development Kit
|
||
|
*/
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/reset/snps,hsdk-reset.h>
|
||
|
|
||
|
/ {
|
||
|
model = "snps,hsdk";
|
||
|
compatible = "snps,hsdk";
|
||
|
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
chosen {
|
||
|
bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
|
||
|
};
|
||
|
|
||
|
aliases {
|
||
|
ethernet = &gmac;
|
||
|
};
|
||
|
|
||
|
cpus {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
cpu@0 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "snps,archs38";
|
||
|
reg = <0>;
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
|
||
|
cpu@1 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "snps,archs38";
|
||
|
reg = <1>;
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
|
||
|
cpu@2 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "snps,archs38";
|
||
|
reg = <2>;
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
|
||
|
cpu@3 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "snps,archs38";
|
||
|
reg = <3>;
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
input_clk: input-clk {
|
||
|
#clock-cells = <0>;
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <33333333>;
|
||
|
};
|
||
|
|
||
|
reg_5v0: regulator-5v0 {
|
||
|
compatible = "regulator-fixed";
|
||
|
|
||
|
regulator-name = "5v0-supply";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
};
|
||
|
|
||
|
cpu_intc: cpu-interrupt-controller {
|
||
|
compatible = "snps,archs-intc";
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <1>;
|
||
|
};
|
||
|
|
||
|
idu_intc: idu-interrupt-controller {
|
||
|
compatible = "snps,archs-idu-intc";
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <1>;
|
||
|
interrupt-parent = <&cpu_intc>;
|
||
|
};
|
||
|
|
||
|
arcpct: pct {
|
||
|
compatible = "snps,archs-pct";
|
||
|
interrupt-parent = <&cpu_intc>;
|
||
|
interrupts = <20>;
|
||
|
};
|
||
|
|
||
|
/* TIMER0 with interrupt for clockevent */
|
||
|
timer {
|
||
|
compatible = "snps,arc-timer";
|
||
|
interrupts = <16>;
|
||
|
interrupt-parent = <&cpu_intc>;
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
|
||
|
/* 64-bit Global Free Running Counter */
|
||
|
gfrc {
|
||
|
compatible = "snps,archs-timer-gfrc";
|
||
|
clocks = <&core_clk>;
|
||
|
};
|
||
|
|
||
|
soc {
|
||
|
compatible = "simple-bus";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
interrupt-parent = <&idu_intc>;
|
||
|
|
||
|
ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
|
||
|
|
||
|
cgu_rst: reset-controller@8a0 {
|
||
|
compatible = "snps,hsdk-reset";
|
||
|
#reset-cells = <1>;
|
||
|
reg = <0x8a0 0x4>, <0xff0 0x4>;
|
||
|
};
|
||
|
|
||
|
core_clk: core-clk@0 {
|
||
|
compatible = "snps,hsdk-core-pll-clock";
|
||
|
reg = <0x00 0x10>, <0x14b8 0x4>;
|
||
|
#clock-cells = <0>;
|
||
|
clocks = <&input_clk>;
|
||
|
|
||
|
/*
|
||
|
* Set initial core pll output frequency to 1GHz.
|
||
|
* It will be applied at the core pll driver probing
|
||
|
* on early boot.
|
||
|
*/
|
||
|
assigned-clocks = <&core_clk>;
|
||
|
assigned-clock-rates = <1000000000>;
|
||
|
};
|
||
|
|
||
|
serial: serial@5000 {
|
||
|
compatible = "snps,dw-apb-uart";
|
||
|
reg = <0x5000 0x100>;
|
||
|
clock-frequency = <33330000>;
|
||
|
interrupts = <6>;
|
||
|
baud = <115200>;
|
||
|
reg-shift = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
};
|
||
|
|
||
|
gmacclk: gmacclk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <400000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
mmcclk_ciu: mmcclk-ciu {
|
||
|
compatible = "fixed-clock";
|
||
|
/*
|
||
|
* DW sdio controller has external ciu clock divider
|
||
|
* controlled via register in SDIO IP. Due to its
|
||
|
* unexpected default value (it should divide by 1
|
||
|
* but it divides by 8) SDIO IP uses wrong clock and
|
||
|
* works unstable (see STAR 9001204800)
|
||
|
* We switched to the minimum possible value of the
|
||
|
* divisor (div-by-2) in HSDK platform code.
|
||
|
* So add temporary fix and change clock frequency
|
||
|
* to 50000000 Hz until we fix dw sdio driver itself.
|
||
|
*/
|
||
|
clock-frequency = <50000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
mmcclk_biu: mmcclk-biu {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <400000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
gpu_core_clk: gpu-core-clk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <400000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
gpu_dma_clk: gpu-dma-clk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <400000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
gpu_cfg_clk: gpu-cfg-clk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <200000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
dmac_core_clk: dmac-core-clk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <400000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
dmac_cfg_clk: dmac-gpu-cfg-clk {
|
||
|
compatible = "fixed-clock";
|
||
|
clock-frequency = <200000000>;
|
||
|
#clock-cells = <0>;
|
||
|
};
|
||
|
|
||
|
gmac: ethernet@8000 {
|
||
|
#interrupt-cells = <1>;
|
||
|
compatible = "snps,dwmac";
|
||
|
reg = <0x8000 0x2000>;
|
||
|
interrupts = <10>;
|
||
|
interrupt-names = "macirq";
|
||
|
phy-mode = "rgmii-id";
|
||
|
snps,pbl = <32>;
|
||
|
snps,multicast-filter-bins = <256>;
|
||
|
clocks = <&gmacclk>;
|
||
|
clock-names = "stmmaceth";
|
||
|
phy-handle = <&phy0>;
|
||
|
resets = <&cgu_rst HSDK_ETH_RESET>;
|
||
|
reset-names = "stmmaceth";
|
||
|
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
|
||
|
dma-coherent;
|
||
|
|
||
|
tx-fifo-depth = <4096>;
|
||
|
rx-fifo-depth = <4096>;
|
||
|
|
||
|
mdio {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
compatible = "snps,dwmac-mdio";
|
||
|
phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
|
||
|
reg = <0>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
usb@60000 {
|
||
|
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
|
||
|
reg = <0x60000 0x100>;
|
||
|
interrupts = <15>;
|
||
|
resets = <&cgu_rst HSDK_USB_RESET>;
|
||
|
dma-coherent;
|
||
|
};
|
||
|
|
||
|
usb@40000 {
|
||
|
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
|
||
|
reg = <0x40000 0x100>;
|
||
|
interrupts = <15>;
|
||
|
resets = <&cgu_rst HSDK_USB_RESET>;
|
||
|
dma-coherent;
|
||
|
};
|
||
|
|
||
|
mmc@a000 {
|
||
|
compatible = "altr,socfpga-dw-mshc";
|
||
|
reg = <0xa000 0x400>;
|
||
|
num-slots = <1>;
|
||
|
fifo-depth = <16>;
|
||
|
card-detect-delay = <200>;
|
||
|
clocks = <&mmcclk_biu>, <&mmcclk_ciu>;
|
||
|
clock-names = "biu", "ciu";
|
||
|
interrupts = <12>;
|
||
|
bus-width = <4>;
|
||
|
dma-coherent;
|
||
|
};
|
||
|
|
||
|
spi0: spi@20000 {
|
||
|
compatible = "snps,dw-apb-ssi";
|
||
|
reg = <0x20000 0x100>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
interrupts = <16>;
|
||
|
num-cs = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
clocks = <&input_clk>;
|
||
|
cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
|
||
|
<&creg_gpio 1 GPIO_ACTIVE_LOW>;
|
||
|
|
||
|
flash@0 {
|
||
|
compatible = "sst26wf016b", "jedec,spi-nor";
|
||
|
reg = <0>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
spi-max-frequency = <4000000>;
|
||
|
};
|
||
|
|
||
|
adc@1 {
|
||
|
compatible = "ti,adc108s102";
|
||
|
reg = <1>;
|
||
|
vref-supply = <®_5v0>;
|
||
|
spi-max-frequency = <1000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
creg_gpio: gpio@14b0 {
|
||
|
compatible = "snps,creg-gpio-hsdk";
|
||
|
reg = <0x14b0 0x4>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
ngpios = <2>;
|
||
|
};
|
||
|
|
||
|
gpio: gpio@3000 {
|
||
|
compatible = "snps,dw-apb-gpio";
|
||
|
reg = <0x3000 0x20>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
gpio_port_a: gpio-controller@0 {
|
||
|
compatible = "snps,dw-apb-gpio-port";
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
snps,nr-gpios = <24>;
|
||
|
reg = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gpu_3d: gpu@90000 {
|
||
|
compatible = "vivante,gc";
|
||
|
reg = <0x90000 0x4000>;
|
||
|
clocks = <&gpu_dma_clk>,
|
||
|
<&gpu_cfg_clk>,
|
||
|
<&gpu_core_clk>,
|
||
|
<&gpu_core_clk>;
|
||
|
clock-names = "bus", "reg", "core", "shader";
|
||
|
interrupts = <28>;
|
||
|
};
|
||
|
|
||
|
dmac: dmac@80000 {
|
||
|
compatible = "snps,axi-dma-1.01a";
|
||
|
reg = <0x80000 0x400>;
|
||
|
interrupts = <27>;
|
||
|
clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
|
||
|
clock-names = "core-clk", "cfgr-clk";
|
||
|
|
||
|
dma-channels = <4>;
|
||
|
snps,dma-masters = <2>;
|
||
|
snps,data-width = <3>;
|
||
|
snps,block-size = <4096 4096 4096 4096>;
|
||
|
snps,priority = <0 1 2 3>;
|
||
|
snps,axi-max-burst-len = <16>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
memory@80000000 {
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <2>;
|
||
|
device_type = "memory";
|
||
|
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */
|
||
|
/* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */
|
||
|
};
|
||
|
};
|