658 lines
15 KiB
Plaintext
658 lines
15 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
|
/*
|
||
|
|
* Copyright 2011 ST-Ericsson AB
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "ste-db9500.dtsi"
|
||
|
|
#include "ste-href-ab8500.dtsi"
|
||
|
|
#include "ste-href-family-pinctrl.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Calao Systems Snowball platform with device tree";
|
||
|
|
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
|
||
|
|
|
||
|
|
memory {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x00000000 0x20000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
battery: battery {
|
||
|
|
compatible = "simple-battery";
|
||
|
|
battery-type = "lithium-ion-polymer";
|
||
|
|
};
|
||
|
|
|
||
|
|
thermal-zones {
|
||
|
|
battery-thermal {
|
||
|
|
/* This zone will be polled by the battery temperature code */
|
||
|
|
polling-delay = <0>;
|
||
|
|
polling-delay-passive = <0>;
|
||
|
|
thermal-sensors = <&bat_therm>;
|
||
|
|
|
||
|
|
trips {
|
||
|
|
battery-crit-hi {
|
||
|
|
temperature = <70000>;
|
||
|
|
hysteresis = <2000>;
|
||
|
|
type = "critical";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
bat_therm: thermistor {
|
||
|
|
compatible = "murata,ncp18wb473";
|
||
|
|
io-channels = <&gpadc 0x02>; /* BatTemp */
|
||
|
|
pullup-uv = <1800000>;
|
||
|
|
pullup-ohm = <230000>;
|
||
|
|
pulldown-ohm = <0>;
|
||
|
|
#thermal-sensor-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
en_3v3_reg: en_3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "en-3v3-fixed-supply";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
|
||
|
|
gpio = <&ab8500_gpio 25 0x4>;
|
||
|
|
startup-delay-us = <5000>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
button@1 {
|
||
|
|
debounce-interval = <50>;
|
||
|
|
wakeup-source;
|
||
|
|
linux,code = <2>;
|
||
|
|
label = "userpb";
|
||
|
|
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
button@2 {
|
||
|
|
debounce-interval = <50>;
|
||
|
|
wakeup-source;
|
||
|
|
linux,code = <3>;
|
||
|
|
label = "extkb1";
|
||
|
|
gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
button@3 {
|
||
|
|
debounce-interval = <50>;
|
||
|
|
wakeup-source;
|
||
|
|
linux,code = <4>;
|
||
|
|
label = "extkb2";
|
||
|
|
gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
button@4 {
|
||
|
|
debounce-interval = <50>;
|
||
|
|
wakeup-source;
|
||
|
|
linux,code = <5>;
|
||
|
|
label = "extkb3";
|
||
|
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
button@5 {
|
||
|
|
debounce-interval = <50>;
|
||
|
|
wakeup-source;
|
||
|
|
linux,code = <6>;
|
||
|
|
label = "extkb4";
|
||
|
|
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&gpioled_snowball_mode>;
|
||
|
|
used-led {
|
||
|
|
label = "user_led";
|
||
|
|
gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
|
||
|
|
default-state = "on";
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
soc {
|
||
|
|
/* Name the GPIO muxed rails on the Snowball board */
|
||
|
|
gpio@8012e000 {
|
||
|
|
/* GPIOs 0 - 31 */
|
||
|
|
gpio-line-names = "", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "",
|
||
|
|
"AP_GPIO31";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8012e080 {
|
||
|
|
/* GPIOs 32 - 63 */
|
||
|
|
gpio-line-names = "USR PB", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8000e000 {
|
||
|
|
/* GPIOs 64 - 95 */
|
||
|
|
gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8000e100 {
|
||
|
|
/* GPIOs 128 - 159 */
|
||
|
|
gpio-line-names = "", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "IRQ_LAN", "RSTn_LAN",
|
||
|
|
"USR_LED", "", "", "", "", "", "",
|
||
|
|
"", "", "AP_GPIO151", "AP_GPIO152",
|
||
|
|
"", "", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8000e180 {
|
||
|
|
/* GPIOs 160 - 191 */
|
||
|
|
gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
|
||
|
|
"ACCELEROMETER_INT1_RDY",
|
||
|
|
"ACCELEROMETER_INT2", "MAG_DRDY",
|
||
|
|
"GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
|
||
|
|
"GYRO_INT", "UART_WAKE", "GBF_RESET",
|
||
|
|
"", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8011e000 {
|
||
|
|
/* GPIOs 192 - 223 */
|
||
|
|
gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
|
||
|
|
"", "", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "", "",
|
||
|
|
"WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
|
||
|
|
"MMC_CD", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@8011e080 {
|
||
|
|
/* GPIOs 224 - 255 */
|
||
|
|
gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "",
|
||
|
|
"", "", "", "", "", "", "", "";
|
||
|
|
};
|
||
|
|
|
||
|
|
msp0: msp@80123000 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
msp1: msp@80124000 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&msp1txrx_a_1_default>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
msp2: msp@80117000 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&msp2_a_1_default>;
|
||
|
|
};
|
||
|
|
|
||
|
|
msp3: msp@80125000 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
external-bus@50000000 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ethernet@0 {
|
||
|
|
compatible = "smsc,lan9115";
|
||
|
|
reg = <0 0x10000>;
|
||
|
|
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
interrupt-parent = <&gpio4>;
|
||
|
|
vdd33a-supply = <&en_3v3_reg>;
|
||
|
|
vddvario-supply = <&db8500_vape_reg>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <ð_snowball_mode>;
|
||
|
|
|
||
|
|
reg-shift = <1>;
|
||
|
|
reg-io-width = <2>;
|
||
|
|
smsc,force-internal-phy;
|
||
|
|
smsc,irq-active-high;
|
||
|
|
smsc,irq-push-pull;
|
||
|
|
|
||
|
|
clocks = <&prcc_pclk 3 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* ST6G3244ME level translator for 1.8/2.9 V */
|
||
|
|
vmmci: regulator-gpio {
|
||
|
|
compatible = "regulator-gpio";
|
||
|
|
|
||
|
|
/* GPIO228 SD_SEL */
|
||
|
|
gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
|
||
|
|
/* GPIO217 MMC_EN */
|
||
|
|
enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2900000>;
|
||
|
|
regulator-name = "mmci-reg";
|
||
|
|
regulator-type = "voltage";
|
||
|
|
|
||
|
|
startup-delay-us = <100>;
|
||
|
|
|
||
|
|
states = <1800000 0x1
|
||
|
|
2900000 0x0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
// External Micro SD slot
|
||
|
|
mmc@80126000 {
|
||
|
|
arm,primecell-periphid = <0x10480180>;
|
||
|
|
max-frequency = <100000000>;
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
sd-uhs-sdr12;
|
||
|
|
sd-uhs-sdr25;
|
||
|
|
/* All direction control is used */
|
||
|
|
st,sig-dir-cmd;
|
||
|
|
st,sig-dir-dat0;
|
||
|
|
st,sig-dir-dat2;
|
||
|
|
st,sig-dir-dat31;
|
||
|
|
st,sig-pin-fbclk;
|
||
|
|
full-pwr-cycle;
|
||
|
|
vmmc-supply = <&ab8500_ldo_aux3_reg>;
|
||
|
|
vqmmc-supply = <&vmmci>;
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
|
||
|
|
pinctrl-1 = <&mc0_a_1_sleep>;
|
||
|
|
|
||
|
|
/* GPIO218 MMC_CD */
|
||
|
|
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
// WLAN SDIO channel
|
||
|
|
mmc@80118000 {
|
||
|
|
arm,primecell-periphid = <0x10480180>;
|
||
|
|
max-frequency = <100000000>;
|
||
|
|
bus-width = <4>;
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&mc1_a_1_default>;
|
||
|
|
pinctrl-1 = <&mc1_a_1_sleep>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
// Unused PoP eMMC - register and put it to sleep by default */
|
||
|
|
mmc@80005000 {
|
||
|
|
arm,primecell-periphid = <0x10480180>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mc2_a_1_sleep>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
// On-board eMMC
|
||
|
|
mmc@80114000 {
|
||
|
|
arm,primecell-periphid = <0x10480180>;
|
||
|
|
max-frequency = <100000000>;
|
||
|
|
bus-width = <8>;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
no-sdio;
|
||
|
|
no-sd;
|
||
|
|
vmmc-supply = <&ab8500_ldo_aux2_reg>;
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&mc4_a_1_default>;
|
||
|
|
pinctrl-1 = <&mc4_a_1_sleep>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
uart@80120000 {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&u0_a_1_default>;
|
||
|
|
pinctrl-1 = <&u0_a_1_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* This UART is unused and thus left disabled */
|
||
|
|
uart@80121000 {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&u1rxtx_a_1_default>;
|
||
|
|
pinctrl-1 = <&u1rxtx_a_1_sleep>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart@80007000 {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&u2rxtx_c_1_default>;
|
||
|
|
pinctrl-1 = <&u2rxtx_c_1_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@80004000 {
|
||
|
|
pinctrl-names = "default","sleep";
|
||
|
|
pinctrl-0 = <&i2c0_a_1_default>;
|
||
|
|
pinctrl-1 = <&i2c0_a_1_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@80122000 {
|
||
|
|
pinctrl-names = "default","sleep";
|
||
|
|
pinctrl-0 = <&i2c1_b_2_default>;
|
||
|
|
pinctrl-1 = <&i2c1_b_2_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@80128000 {
|
||
|
|
pinctrl-names = "default","sleep";
|
||
|
|
pinctrl-0 = <&i2c2_b_2_default>;
|
||
|
|
pinctrl-1 = <&i2c2_b_2_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
lsm303dlh@18 {
|
||
|
|
/* Accelerometer */
|
||
|
|
compatible = "st,lsm303dlh-accel";
|
||
|
|
st,drdy-int-pin = <1>;
|
||
|
|
reg = <0x18>;
|
||
|
|
vdd-supply = <&ab8500_ldo_aux1_reg>;
|
||
|
|
vddio-supply = <&db8500_vsmps2_reg>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&accel_snowball_mode>;
|
||
|
|
interrupt-parent = <&gpio5>;
|
||
|
|
interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
|
||
|
|
<4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
|
||
|
|
};
|
||
|
|
lsm303dlh@1e {
|
||
|
|
/* Magnetometer */
|
||
|
|
compatible = "st,lsm303dlh-magn";
|
||
|
|
reg = <0x1e>;
|
||
|
|
vdd-supply = <&ab8500_ldo_aux1_reg>;
|
||
|
|
vddio-supply = <&db8500_vsmps2_reg>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&magneto_snowball_mode>;
|
||
|
|
interrupt-parent = <&gpio5>;
|
||
|
|
interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
|
||
|
|
};
|
||
|
|
l3g4200d@68 {
|
||
|
|
/* Gyroscope */
|
||
|
|
compatible = "st,l3g4200d-gyro";
|
||
|
|
st,drdy-int-pin = <2>;
|
||
|
|
reg = <0x68>;
|
||
|
|
vdd-supply = <&ab8500_ldo_aux1_reg>;
|
||
|
|
vddio-supply = <&db8500_vsmps2_reg>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&gyro_snowball_mode>;
|
||
|
|
interrupt-parent = <&gpio5>;
|
||
|
|
interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
|
||
|
|
<9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
|
||
|
|
};
|
||
|
|
lsp001wm@5c {
|
||
|
|
/* Barometer/pressure sensor */
|
||
|
|
compatible = "st,lps001wp-press";
|
||
|
|
reg = <0x5c>;
|
||
|
|
vdd-supply = <&ab8500_ldo_aux1_reg>;
|
||
|
|
vddio-supply = <&db8500_vsmps2_reg>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@80110000 {
|
||
|
|
pinctrl-names = "default","sleep";
|
||
|
|
pinctrl-0 = <&i2c3_c_2_default>;
|
||
|
|
pinctrl-1 = <&i2c3_c_2_sleep>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
spi@80002000 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&ssp0_snowball_mode>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
prcmu@80157000 {
|
||
|
|
ab8500 {
|
||
|
|
gpio {
|
||
|
|
/*
|
||
|
|
* AB8500 GPIOs are numbered starting from 1, so the first
|
||
|
|
* index 0 is what in the datasheet is called "GPIO1", and
|
||
|
|
* the second is "GPIO2" and so forth. Confusingly, the
|
||
|
|
* Snowball schematic then names the "GPIO2" line "PM_GPIO1".
|
||
|
|
* while later naming "GPIO4" as "PM_GPIO4".
|
||
|
|
*/
|
||
|
|
gpio-line-names = "", /* AB8500 GPIO1 */
|
||
|
|
"PM_GPIO1", /* AB8500 GPIO2 */
|
||
|
|
"WLAN_CLK_REQ", /* AB8500 GPIO3 */
|
||
|
|
"PM_GPIO4", /* AB8500 GPIO4 */
|
||
|
|
"", "", "", "", "", "", "", "", "", "", "",
|
||
|
|
"EN_3V6", /* AB8500 GPIO16 */
|
||
|
|
"", "", "", "" ,"", "", "", "", "",
|
||
|
|
"EN_3V3", /* AB8500 GPIO26 */
|
||
|
|
"", "", "", "", "", "", "", "", "", "", "", "", "",
|
||
|
|
"PM_GPIO40", /* AB8500 GPIO40 */
|
||
|
|
"PM_GPIO41", /* AB8500 GPIO41 */
|
||
|
|
"PM_GPIO42"; /* AB8500 GPIO42 */
|
||
|
|
};
|
||
|
|
|
||
|
|
phy {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&usb_a_1_default>;
|
||
|
|
pinctrl-1 = <&usb_a_1_sleep>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ext_regulators: regulator-external {
|
||
|
|
ab8500_ext1_reg: ab8500_ext1 {
|
||
|
|
regulator-name = "ab8500-ext-supply1";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ext2_reg_reg: ab8500_ext2 {
|
||
|
|
regulator-name = "ab8500-ext-supply2";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ext3_reg_reg: ab8500_ext3 {
|
||
|
|
regulator-name = "ab8500-ext-supply3";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
regulator {
|
||
|
|
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
|
||
|
|
regulator-name = "V-DISPLAY";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
|
||
|
|
regulator-name = "V-eMMC1";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
|
||
|
|
regulator-name = "V-MMC-SD";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
|
||
|
|
regulator-name = "V-INTCORE";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
|
||
|
|
regulator-name = "V-TVOUT";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_audio_reg: ab8500_ldo_audio {
|
||
|
|
regulator-name = "V-AUD";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
|
||
|
|
regulator-name = "V-AMIC1";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
|
||
|
|
regulator-name = "V-AMIC2";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
|
||
|
|
regulator-name = "V-DMIC";
|
||
|
|
};
|
||
|
|
|
||
|
|
ab8500_ldo_ana_reg: ab8500_ldo_ana {
|
||
|
|
regulator-name = "V-CSI/DSI";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl {
|
||
|
|
/*
|
||
|
|
* Set this up using hogs, as time goes by and as seems fit, these
|
||
|
|
* can be moved over to being controlled by respective device.
|
||
|
|
*/
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&gbf_snowball_mode>,
|
||
|
|
<&wlan_snowball_mode>;
|
||
|
|
|
||
|
|
ethernet {
|
||
|
|
/*
|
||
|
|
* Mux in "SM" which is used for the
|
||
|
|
* SMSC911x Ethernet adapter
|
||
|
|
*/
|
||
|
|
eth_snowball_mode: eth_snowball {
|
||
|
|
snowball_mux {
|
||
|
|
function = "sm";
|
||
|
|
groups = "sm_b_1";
|
||
|
|
};
|
||
|
|
/* LAN IRQ pin */
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO140_B11";
|
||
|
|
ste,config = <&in_nopull>;
|
||
|
|
};
|
||
|
|
/* LAN reset pin */
|
||
|
|
snowball_cfg2 {
|
||
|
|
pins = "GPIO141_C12";
|
||
|
|
ste,config = <&gpio_out_hi>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
};
|
||
|
|
sdi0 {
|
||
|
|
sdi0_default_mode: sdi0_default {
|
||
|
|
snowball_mux {
|
||
|
|
function = "mc0";
|
||
|
|
/* Add the DAT31 pin even if it is not really used */
|
||
|
|
groups = "mc0dat31dir_a_1";
|
||
|
|
};
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO21_AB3"; /* DAT31DIR */
|
||
|
|
ste,config = <&out_hi>;
|
||
|
|
};
|
||
|
|
/* SD card detect GPIO pin, extend default state */
|
||
|
|
snowball_cfg2 {
|
||
|
|
pins = "GPIO218_AH11";
|
||
|
|
ste,config = <&gpio_in_pu>;
|
||
|
|
};
|
||
|
|
/* VMMCI level-shifter enable */
|
||
|
|
snowball_cfg3 {
|
||
|
|
pins = "GPIO217_AH12";
|
||
|
|
ste,config = <&gpio_out_hi>;
|
||
|
|
};
|
||
|
|
/* VMMCI level-shifter voltage select */
|
||
|
|
snowball_cfg4 {
|
||
|
|
pins = "GPIO228_AJ6";
|
||
|
|
ste,config = <&gpio_out_hi>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
ssp0 {
|
||
|
|
ssp0_snowball_mode: ssp0_snowball_default {
|
||
|
|
snowball_mux {
|
||
|
|
function = "ssp0";
|
||
|
|
groups = "ssp0_a_1";
|
||
|
|
};
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO144_B13"; /* FRM */
|
||
|
|
ste,config = <&gpio_out_hi>;
|
||
|
|
};
|
||
|
|
snowball_cfg2 {
|
||
|
|
pins = "GPIO145_C13"; /* RXD */
|
||
|
|
ste,config = <&in_pd>;
|
||
|
|
};
|
||
|
|
snowball_cfg3 {
|
||
|
|
pins =
|
||
|
|
"GPIO146_D13", /* TXD */
|
||
|
|
"GPIO143_D12"; /* CLK */
|
||
|
|
ste,config = <&out_lo>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
};
|
||
|
|
gpio_led {
|
||
|
|
gpioled_snowball_mode: gpioled_default {
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO142_C11";
|
||
|
|
ste,config = <&gpio_out_hi>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
};
|
||
|
|
accelerometer {
|
||
|
|
accel_snowball_mode: accel_snowball {
|
||
|
|
/* Accelerometer lines */
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins =
|
||
|
|
"GPIO163_C20", /* ACCEL_IRQ1 */
|
||
|
|
"GPIO164_B21"; /* ACCEL_IRQ2 */
|
||
|
|
ste,config = <&gpio_in_pu>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
gyro {
|
||
|
|
gyro_snowball_mode: gyro_snowball {
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins =
|
||
|
|
"GPIO166_A22", /* DRDY */
|
||
|
|
"GPIO169_D22"; /* INT */
|
||
|
|
ste,config = <&gpio_in_pu>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
magnetometer {
|
||
|
|
magneto_snowball_mode: magneto_snowball {
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO165_C21"; /* MAG_DRDY */
|
||
|
|
ste,config = <&gpio_in_pu>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
gbf {
|
||
|
|
gbf_snowball_mode: gbf_snowball {
|
||
|
|
/*
|
||
|
|
* GBF (GPS, Bluetooth, FM-radio) interface,
|
||
|
|
* pull low to reset state
|
||
|
|
*/
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins = "GPIO171_D23"; /* GBF_ENA_RESET */
|
||
|
|
ste,config = <&gpio_out_lo>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
wlan {
|
||
|
|
wlan_snowball_mode: wlan_snowball {
|
||
|
|
/*
|
||
|
|
* Activate this mode with the WLAN chip.
|
||
|
|
* These are plain GPIO pins used by WLAN
|
||
|
|
*/
|
||
|
|
snowball_cfg1 {
|
||
|
|
pins =
|
||
|
|
"GPIO161_D21", /* WLAN_PMU_EN */
|
||
|
|
"GPIO215_AH13"; /* WLAN_ENA */
|
||
|
|
ste,config = <&gpio_out_lo>;
|
||
|
|
};
|
||
|
|
snowball_cfg2 {
|
||
|
|
pins = "GPIO216_AG12"; /* WLAN_IRQ */
|
||
|
|
ste,config = <&gpio_in_pu>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mcde@a0350000 {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&lcd_default_mode>;
|
||
|
|
pinctrl-1 = <&lcd_sleep_mode>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|