731 lines
17 KiB
Plaintext
731 lines
17 KiB
Plaintext
|
/*
|
||
|
|
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
|
||
|
|
*
|
||
|
|
* This file is dual-licensed: you can use it either under the terms
|
||
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||
|
|
* licensing only applies to this file, and not this project as a
|
||
|
|
* whole.
|
||
|
|
*
|
||
|
|
* a) This file is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of the
|
||
|
|
* License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This file is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* Or, alternatively,
|
||
|
|
*
|
||
|
|
* b) Permission is hereby granted, free of charge, to any person
|
||
|
|
* obtaining a copy of this software and associated documentation
|
||
|
|
* files (the "Software"), to deal in the Software without
|
||
|
|
* restriction, including without limitation the rights to use,
|
||
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||
|
|
* sell copies of the Software, and to permit persons to whom the
|
||
|
|
* Software is furnished to do so, subject to the following
|
||
|
|
* conditions:
|
||
|
|
*
|
||
|
|
* The above copyright notice and this permission notice shall be
|
||
|
|
* included in all copies or substantial portions of the Software.
|
||
|
|
*
|
||
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "armv7-m.dtsi"
|
||
|
|
#include <dt-bindings/clock/stm32h7-clks.h>
|
||
|
|
#include <dt-bindings/mfd/stm32h7-rcc.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
|
||
|
|
clocks {
|
||
|
|
clk_hse: clk-hse {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
clk_lse: clk-lse {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
};
|
||
|
|
|
||
|
|
clk_i2s: i2s_ckin {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
soc {
|
||
|
|
timer5: timer@40000c00 {
|
||
|
|
compatible = "st,stm32-timer";
|
||
|
|
reg = <0x40000c00 0x400>;
|
||
|
|
interrupts = <50>;
|
||
|
|
clocks = <&rcc TIM5_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
lptimer1: timer@40002400 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32-lptimer";
|
||
|
|
reg = <0x40002400 0x400>;
|
||
|
|
clocks = <&rcc LPTIM1_CK>;
|
||
|
|
clock-names = "mux";
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
pwm {
|
||
|
|
compatible = "st,stm32-pwm-lp";
|
||
|
|
#pwm-cells = <3>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
trigger@0 {
|
||
|
|
compatible = "st,stm32-lptimer-trigger";
|
||
|
|
reg = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
counter {
|
||
|
|
compatible = "st,stm32-lptimer-counter";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
spi2: spi@40003800 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x40003800 0x400>;
|
||
|
|
interrupts = <36>;
|
||
|
|
resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
|
||
|
|
clocks = <&rcc SPI2_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
spi3: spi@40003c00 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x40003c00 0x400>;
|
||
|
|
interrupts = <51>;
|
||
|
|
resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
|
||
|
|
clocks = <&rcc SPI3_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
usart2: serial@40004400 {
|
||
|
|
compatible = "st,stm32h7-uart";
|
||
|
|
reg = <0x40004400 0x400>;
|
||
|
|
interrupts = <38>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&rcc USART2_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
usart3: serial@40004800 {
|
||
|
|
compatible = "st,stm32h7-uart";
|
||
|
|
reg = <0x40004800 0x400>;
|
||
|
|
interrupts = <39>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&rcc USART3_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart4: serial@40004c00 {
|
||
|
|
compatible = "st,stm32h7-uart";
|
||
|
|
reg = <0x40004c00 0x400>;
|
||
|
|
interrupts = <52>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&rcc UART4_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c1: i2c@40005400 {
|
||
|
|
compatible = "st,stm32f7-i2c";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x40005400 0x400>;
|
||
|
|
interrupts = <31>,
|
||
|
|
<32>;
|
||
|
|
resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
|
||
|
|
clocks = <&rcc I2C1_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c2: i2c@40005800 {
|
||
|
|
compatible = "st,stm32f7-i2c";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x40005800 0x400>;
|
||
|
|
interrupts = <33>,
|
||
|
|
<34>;
|
||
|
|
resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
|
||
|
|
clocks = <&rcc I2C2_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c3: i2c@40005c00 {
|
||
|
|
compatible = "st,stm32f7-i2c";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x40005C00 0x400>;
|
||
|
|
interrupts = <72>,
|
||
|
|
<73>;
|
||
|
|
resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
|
||
|
|
clocks = <&rcc I2C3_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dac: dac@40007400 {
|
||
|
|
compatible = "st,stm32h7-dac-core";
|
||
|
|
reg = <0x40007400 0x400>;
|
||
|
|
clocks = <&rcc DAC12_CK>;
|
||
|
|
clock-names = "pclk";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
dac1: dac@1 {
|
||
|
|
compatible = "st,stm32-dac";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
reg = <1>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dac2: dac@2 {
|
||
|
|
compatible = "st,stm32-dac";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
reg = <2>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usart1: serial@40011000 {
|
||
|
|
compatible = "st,stm32h7-uart";
|
||
|
|
reg = <0x40011000 0x400>;
|
||
|
|
interrupts = <37>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&rcc USART1_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi1: spi@40013000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x40013000 0x400>;
|
||
|
|
interrupts = <35>;
|
||
|
|
resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
|
||
|
|
clocks = <&rcc SPI1_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
spi4: spi@40013400 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x40013400 0x400>;
|
||
|
|
interrupts = <84>;
|
||
|
|
resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
|
||
|
|
clocks = <&rcc SPI4_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
spi5: spi@40015000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x40015000 0x400>;
|
||
|
|
interrupts = <85>;
|
||
|
|
resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
|
||
|
|
clocks = <&rcc SPI5_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dma1: dma-controller@40020000 {
|
||
|
|
compatible = "st,stm32-dma";
|
||
|
|
reg = <0x40020000 0x400>;
|
||
|
|
interrupts = <11>,
|
||
|
|
<12>,
|
||
|
|
<13>,
|
||
|
|
<14>,
|
||
|
|
<15>,
|
||
|
|
<16>,
|
||
|
|
<17>,
|
||
|
|
<47>;
|
||
|
|
clocks = <&rcc DMA1_CK>;
|
||
|
|
#dma-cells = <4>;
|
||
|
|
st,mem2mem;
|
||
|
|
dma-requests = <8>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dma2: dma-controller@40020400 {
|
||
|
|
compatible = "st,stm32-dma";
|
||
|
|
reg = <0x40020400 0x400>;
|
||
|
|
interrupts = <56>,
|
||
|
|
<57>,
|
||
|
|
<58>,
|
||
|
|
<59>,
|
||
|
|
<60>,
|
||
|
|
<68>,
|
||
|
|
<69>,
|
||
|
|
<70>;
|
||
|
|
clocks = <&rcc DMA2_CK>;
|
||
|
|
#dma-cells = <4>;
|
||
|
|
st,mem2mem;
|
||
|
|
dma-requests = <8>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dmamux1: dma-router@40020800 {
|
||
|
|
compatible = "st,stm32h7-dmamux";
|
||
|
|
reg = <0x40020800 0x40>;
|
||
|
|
#dma-cells = <3>;
|
||
|
|
dma-channels = <16>;
|
||
|
|
dma-requests = <128>;
|
||
|
|
dma-masters = <&dma1 &dma2>;
|
||
|
|
clocks = <&rcc DMA1_CK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adc_12: adc@40022000 {
|
||
|
|
compatible = "st,stm32h7-adc-core";
|
||
|
|
reg = <0x40022000 0x400>;
|
||
|
|
interrupts = <18>;
|
||
|
|
clocks = <&rcc ADC12_CK>;
|
||
|
|
clock-names = "bus";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
adc1: adc@0 {
|
||
|
|
compatible = "st,stm32h7-adc";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
reg = <0x0>;
|
||
|
|
interrupt-parent = <&adc_12>;
|
||
|
|
interrupts = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
adc2: adc@100 {
|
||
|
|
compatible = "st,stm32h7-adc";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
reg = <0x100>;
|
||
|
|
interrupt-parent = <&adc_12>;
|
||
|
|
interrupts = <1>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usbotg_hs: usb@40040000 {
|
||
|
|
compatible = "st,stm32f7-hsotg";
|
||
|
|
reg = <0x40040000 0x40000>;
|
||
|
|
interrupts = <77>;
|
||
|
|
clocks = <&rcc USB1OTG_CK>;
|
||
|
|
clock-names = "otg";
|
||
|
|
g-rx-fifo-size = <256>;
|
||
|
|
g-np-tx-fifo-size = <32>;
|
||
|
|
g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
usbotg_fs: usb@40080000 {
|
||
|
|
compatible = "st,stm32f4x9-fsotg";
|
||
|
|
reg = <0x40080000 0x40000>;
|
||
|
|
interrupts = <101>;
|
||
|
|
clocks = <&rcc USB2OTG_CK>;
|
||
|
|
clock-names = "otg";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
ltdc: display-controller@50001000 {
|
||
|
|
compatible = "st,stm32-ltdc";
|
||
|
|
reg = <0x50001000 0x200>;
|
||
|
|
interrupts = <88>, <89>;
|
||
|
|
resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
|
||
|
|
clocks = <&rcc LTDC_CK>;
|
||
|
|
clock-names = "lcd";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdma1: dma-controller@52000000 {
|
||
|
|
compatible = "st,stm32h7-mdma";
|
||
|
|
reg = <0x52000000 0x1000>;
|
||
|
|
interrupts = <122>;
|
||
|
|
clocks = <&rcc MDMA_CK>;
|
||
|
|
#dma-cells = <5>;
|
||
|
|
dma-channels = <16>;
|
||
|
|
dma-requests = <32>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sdmmc1: mmc@52007000 {
|
||
|
|
compatible = "arm,pl18x", "arm,primecell";
|
||
|
|
arm,primecell-periphid = <0x10153180>;
|
||
|
|
reg = <0x52007000 0x1000>;
|
||
|
|
interrupts = <49>;
|
||
|
|
clocks = <&rcc SDMMC1_CK>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
max-frequency = <120000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sdmmc2: mmc@48022400 {
|
||
|
|
compatible = "arm,pl18x", "arm,primecell";
|
||
|
|
arm,primecell-periphid = <0x10153180>;
|
||
|
|
reg = <0x48022400 0x400>;
|
||
|
|
interrupts = <124>;
|
||
|
|
clocks = <&rcc SDMMC2_CK>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
max-frequency = <120000000>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
exti: interrupt-controller@58000000 {
|
||
|
|
compatible = "st,stm32h7-exti";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
reg = <0x58000000 0x400>;
|
||
|
|
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
|
||
|
|
};
|
||
|
|
|
||
|
|
syscfg: syscon@58000400 {
|
||
|
|
compatible = "st,stm32-syscfg", "syscon";
|
||
|
|
reg = <0x58000400 0x400>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi6: spi@58001400 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32h7-spi";
|
||
|
|
reg = <0x58001400 0x400>;
|
||
|
|
interrupts = <86>;
|
||
|
|
resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
|
||
|
|
clocks = <&rcc SPI6_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c4: i2c@58001c00 {
|
||
|
|
compatible = "st,stm32f7-i2c";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x58001C00 0x400>;
|
||
|
|
interrupts = <95>,
|
||
|
|
<96>;
|
||
|
|
resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
|
||
|
|
clocks = <&rcc I2C4_CK>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
lptimer2: timer@58002400 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32-lptimer";
|
||
|
|
reg = <0x58002400 0x400>;
|
||
|
|
clocks = <&rcc LPTIM2_CK>;
|
||
|
|
clock-names = "mux";
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
pwm {
|
||
|
|
compatible = "st,stm32-pwm-lp";
|
||
|
|
#pwm-cells = <3>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
trigger@1 {
|
||
|
|
compatible = "st,stm32-lptimer-trigger";
|
||
|
|
reg = <1>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
counter {
|
||
|
|
compatible = "st,stm32-lptimer-counter";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lptimer3: timer@58002800 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "st,stm32-lptimer";
|
||
|
|
reg = <0x58002800 0x400>;
|
||
|
|
clocks = <&rcc LPTIM3_CK>;
|
||
|
|
clock-names = "mux";
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
pwm {
|
||
|
|
compatible = "st,stm32-pwm-lp";
|
||
|
|
#pwm-cells = <3>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
trigger@2 {
|
||
|
|
compatible = "st,stm32-lptimer-trigger";
|
||
|
|
reg = <2>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lptimer4: timer@58002c00 {
|
||
|
|
compatible = "st,stm32-lptimer";
|
||
|
|
reg = <0x58002c00 0x400>;
|
||
|
|
clocks = <&rcc LPTIM4_CK>;
|
||
|
|
clock-names = "mux";
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
pwm {
|
||
|
|
compatible = "st,stm32-pwm-lp";
|
||
|
|
#pwm-cells = <3>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lptimer5: timer@58003000 {
|
||
|
|
compatible = "st,stm32-lptimer";
|
||
|
|
reg = <0x58003000 0x400>;
|
||
|
|
clocks = <&rcc LPTIM5_CK>;
|
||
|
|
clock-names = "mux";
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
pwm {
|
||
|
|
compatible = "st,stm32-pwm-lp";
|
||
|
|
#pwm-cells = <3>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vrefbuf: regulator@58003c00 {
|
||
|
|
compatible = "st,stm32-vrefbuf";
|
||
|
|
reg = <0x58003C00 0x8>;
|
||
|
|
clocks = <&rcc VREF_CK>;
|
||
|
|
regulator-min-microvolt = <1500000>;
|
||
|
|
regulator-max-microvolt = <2500000>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
rtc: rtc@58004000 {
|
||
|
|
compatible = "st,stm32h7-rtc";
|
||
|
|
reg = <0x58004000 0x400>;
|
||
|
|
clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
|
||
|
|
clock-names = "pclk", "rtc_ck";
|
||
|
|
assigned-clocks = <&rcc RTC_CK>;
|
||
|
|
assigned-clock-parents = <&rcc LSE_CK>;
|
||
|
|
interrupt-parent = <&exti>;
|
||
|
|
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
st,syscfg = <&pwrcfg 0x00 0x100>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
rcc: reset-clock-controller@58024400 {
|
||
|
|
compatible = "st,stm32h743-rcc", "st,stm32-rcc";
|
||
|
|
reg = <0x58024400 0x400>;
|
||
|
|
#clock-cells = <1>;
|
||
|
|
#reset-cells = <1>;
|
||
|
|
clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
|
||
|
|
st,syscfg = <&pwrcfg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pwrcfg: power-config@58024800 {
|
||
|
|
compatible = "st,stm32-power-config", "syscon";
|
||
|
|
reg = <0x58024800 0x400>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adc_3: adc@58026000 {
|
||
|
|
compatible = "st,stm32h7-adc-core";
|
||
|
|
reg = <0x58026000 0x400>;
|
||
|
|
interrupts = <127>;
|
||
|
|
clocks = <&rcc ADC3_CK>;
|
||
|
|
clock-names = "bus";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
adc3: adc@0 {
|
||
|
|
compatible = "st,stm32h7-adc";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
reg = <0x0>;
|
||
|
|
interrupt-parent = <&adc_3>;
|
||
|
|
interrupts = <0>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mac: ethernet@40028000 {
|
||
|
|
compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
|
||
|
|
reg = <0x40028000 0x8000>;
|
||
|
|
reg-names = "stmmaceth";
|
||
|
|
interrupts = <61>;
|
||
|
|
interrupt-names = "macirq";
|
||
|
|
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
|
||
|
|
clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>;
|
||
|
|
st,syscon = <&syscfg 0x4>;
|
||
|
|
snps,pbl = <8>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl: pinctrl@58020000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "st,stm32h743-pinctrl";
|
||
|
|
ranges = <0 0x58020000 0x3000>;
|
||
|
|
interrupt-parent = <&exti>;
|
||
|
|
st,syscfg = <&syscfg 0x8>;
|
||
|
|
|
||
|
|
gpioa: gpio@58020000 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x0 0x400>;
|
||
|
|
clocks = <&rcc GPIOA_CK>;
|
||
|
|
st,bank-name = "GPIOA";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 0 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpiob: gpio@58020400 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x400 0x400>;
|
||
|
|
clocks = <&rcc GPIOB_CK>;
|
||
|
|
st,bank-name = "GPIOB";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 16 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpioc: gpio@58020800 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x800 0x400>;
|
||
|
|
clocks = <&rcc GPIOC_CK>;
|
||
|
|
st,bank-name = "GPIOC";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 32 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpiod: gpio@58020c00 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0xc00 0x400>;
|
||
|
|
clocks = <&rcc GPIOD_CK>;
|
||
|
|
st,bank-name = "GPIOD";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 48 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpioe: gpio@58021000 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x1000 0x400>;
|
||
|
|
clocks = <&rcc GPIOE_CK>;
|
||
|
|
st,bank-name = "GPIOE";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 64 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpiof: gpio@58021400 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x1400 0x400>;
|
||
|
|
clocks = <&rcc GPIOF_CK>;
|
||
|
|
st,bank-name = "GPIOF";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 80 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpiog: gpio@58021800 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x1800 0x400>;
|
||
|
|
clocks = <&rcc GPIOG_CK>;
|
||
|
|
st,bank-name = "GPIOG";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 96 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpioh: gpio@58021c00 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x1c00 0x400>;
|
||
|
|
clocks = <&rcc GPIOH_CK>;
|
||
|
|
st,bank-name = "GPIOH";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 112 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpioi: gpio@58022000 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x2000 0x400>;
|
||
|
|
clocks = <&rcc GPIOI_CK>;
|
||
|
|
st,bank-name = "GPIOI";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 128 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpioj: gpio@58022400 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x2400 0x400>;
|
||
|
|
clocks = <&rcc GPIOJ_CK>;
|
||
|
|
st,bank-name = "GPIOJ";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <16>;
|
||
|
|
gpio-ranges = <&pinctrl 0 144 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpiok: gpio@58022800 {
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
reg = <0x2800 0x400>;
|
||
|
|
clocks = <&rcc GPIOK_CK>;
|
||
|
|
st,bank-name = "GPIOK";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
ngpios = <8>;
|
||
|
|
gpio-ranges = <&pinctrl 0 160 8>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&systick {
|
||
|
|
clock-frequency = <250000000>;
|
||
|
|
status = "okay";
|
||
|
|
};
|