495 lines
13 KiB
Plaintext
495 lines
13 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/*
|
||
|
|
* ARM Ltd. Versatile Express
|
||
|
|
*
|
||
|
|
* Motherboard Express uATX
|
||
|
|
* V2M-P1
|
||
|
|
*
|
||
|
|
* HBI-0190D
|
||
|
|
*
|
||
|
|
* RS1 memory map ("ARM Cortex-A Series memory map" in the board's
|
||
|
|
* Technical Reference Manual)
|
||
|
|
*
|
||
|
|
* WARNING! The hardware described in this file is independent from the
|
||
|
|
* original variant (vexpress-v2m.dtsi), but there is a strong
|
||
|
|
* correspondence between the two configurations.
|
||
|
|
*
|
||
|
|
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
|
||
|
|
* CHANGES TO vexpress-v2m.dtsi!
|
||
|
|
*/
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
v2m_fixed_3v3: fixed-regulator-0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "3V3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_clk24mhz: clk24mhz {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <24000000>;
|
||
|
|
clock-output-names = "v2m:clk24mhz";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_refclk1mhz: refclk1mhz {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <1000000>;
|
||
|
|
clock-output-names = "v2m:refclk1mhz";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_refclk32khz: refclk32khz {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
clock-output-names = "v2m:refclk32khz";
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
led-1 {
|
||
|
|
label = "v2m:green:user1";
|
||
|
|
gpios = <&v2m_led_gpios 0 0>;
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-2 {
|
||
|
|
label = "v2m:green:user2";
|
||
|
|
gpios = <&v2m_led_gpios 1 0>;
|
||
|
|
linux,default-trigger = "disk-activity";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-3 {
|
||
|
|
label = "v2m:green:user3";
|
||
|
|
gpios = <&v2m_led_gpios 2 0>;
|
||
|
|
linux,default-trigger = "cpu0";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-4 {
|
||
|
|
label = "v2m:green:user4";
|
||
|
|
gpios = <&v2m_led_gpios 3 0>;
|
||
|
|
linux,default-trigger = "cpu1";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-5 {
|
||
|
|
label = "v2m:green:user5";
|
||
|
|
gpios = <&v2m_led_gpios 4 0>;
|
||
|
|
linux,default-trigger = "cpu2";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-6 {
|
||
|
|
label = "v2m:green:user6";
|
||
|
|
gpios = <&v2m_led_gpios 5 0>;
|
||
|
|
linux,default-trigger = "cpu3";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-7 {
|
||
|
|
label = "v2m:green:user7";
|
||
|
|
gpios = <&v2m_led_gpios 6 0>;
|
||
|
|
linux,default-trigger = "cpu4";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-8 {
|
||
|
|
label = "v2m:green:user8";
|
||
|
|
gpios = <&v2m_led_gpios 7 0>;
|
||
|
|
linux,default-trigger = "cpu5";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
bus@8000000 {
|
||
|
|
compatible = "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-map-mask = <0 63>;
|
||
|
|
interrupt-map = <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
motherboard-bus@8000000 {
|
||
|
|
arm,hbi = <0x190>;
|
||
|
|
arm,vexpress,site = <0>;
|
||
|
|
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
||
|
|
#address-cells = <2>; /* SMB chipselect number and offset */
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0 0x08000000 0x04000000>,
|
||
|
|
<1 0 0x14000000 0x04000000>,
|
||
|
|
<2 0 0x18000000 0x04000000>,
|
||
|
|
<3 0 0x1c000000 0x04000000>,
|
||
|
|
<4 0 0x0c000000 0x04000000>,
|
||
|
|
<5 0 0x10000000 0x04000000>;
|
||
|
|
|
||
|
|
nor_flash: flash@0 {
|
||
|
|
compatible = "arm,vexpress-flash", "cfi-flash";
|
||
|
|
reg = <0 0x00000000 0x04000000>,
|
||
|
|
<4 0x00000000 0x04000000>;
|
||
|
|
bank-width = <4>;
|
||
|
|
partitions {
|
||
|
|
compatible = "arm,arm-firmware-suite";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
psram@100000000 {
|
||
|
|
compatible = "arm,vexpress-psram", "mtd-ram";
|
||
|
|
reg = <1 0x00000000 0x02000000>;
|
||
|
|
bank-width = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ethernet@202000000 {
|
||
|
|
compatible = "smsc,lan9118", "smsc,lan9115";
|
||
|
|
reg = <2 0x02000000 0x10000>;
|
||
|
|
interrupts = <15>;
|
||
|
|
phy-mode = "mii";
|
||
|
|
reg-io-width = <4>;
|
||
|
|
smsc,irq-active-high;
|
||
|
|
smsc,irq-push-pull;
|
||
|
|
vdd33a-supply = <&v2m_fixed_3v3>;
|
||
|
|
vddvario-supply = <&v2m_fixed_3v3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
usb@203000000 {
|
||
|
|
compatible = "nxp,usb-isp1761";
|
||
|
|
reg = <2 0x03000000 0x20000>;
|
||
|
|
interrupts = <16>;
|
||
|
|
dr_mode = "peripheral";
|
||
|
|
};
|
||
|
|
|
||
|
|
iofpga-bus@300000000 {
|
||
|
|
compatible = "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 3 0 0x200000>;
|
||
|
|
|
||
|
|
v2m_sysreg: sysreg@10000 {
|
||
|
|
compatible = "arm,vexpress-sysreg";
|
||
|
|
reg = <0x010000 0x1000>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x10000 0x1000>;
|
||
|
|
|
||
|
|
v2m_led_gpios: gpio@8 {
|
||
|
|
compatible = "arm,vexpress-sysreg,sys_led";
|
||
|
|
reg = <0x008 4>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_mmc_gpios: gpio@48 {
|
||
|
|
compatible = "arm,vexpress-sysreg,sys_mci";
|
||
|
|
reg = <0x048 4>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_flash_gpios: gpio@4c {
|
||
|
|
compatible = "arm,vexpress-sysreg,sys_flash";
|
||
|
|
reg = <0x04c 4>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_sysctl: sysctl@20000 {
|
||
|
|
compatible = "arm,sp810", "arm,primecell";
|
||
|
|
reg = <0x020000 0x1000>;
|
||
|
|
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||
|
|
clock-names = "refclk", "timclk", "apb_pclk";
|
||
|
|
#clock-cells = <1>;
|
||
|
|
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
||
|
|
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
||
|
|
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* PCI-E I2C bus */
|
||
|
|
v2m_i2c_pcie: i2c@30000 {
|
||
|
|
compatible = "arm,versatile-i2c";
|
||
|
|
reg = <0x030000 0x1000>;
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
pcie-switch@60 {
|
||
|
|
compatible = "idt,89hpes32h8";
|
||
|
|
reg = <0x60>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
aaci@40000 {
|
||
|
|
compatible = "arm,pl041", "arm,primecell";
|
||
|
|
reg = <0x040000 0x1000>;
|
||
|
|
interrupts = <11>;
|
||
|
|
clocks = <&smbclk>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc@50000 {
|
||
|
|
compatible = "arm,pl180", "arm,primecell";
|
||
|
|
reg = <0x050000 0x1000>;
|
||
|
|
interrupts = <9>, <10>;
|
||
|
|
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
||
|
|
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
||
|
|
max-frequency = <12000000>;
|
||
|
|
vmmc-supply = <&v2m_fixed_3v3>;
|
||
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||
|
|
clock-names = "mclk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
kmi@60000 {
|
||
|
|
compatible = "arm,pl050", "arm,primecell";
|
||
|
|
reg = <0x060000 0x1000>;
|
||
|
|
interrupts = <12>;
|
||
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
kmi@70000 {
|
||
|
|
compatible = "arm,pl050", "arm,primecell";
|
||
|
|
reg = <0x070000 0x1000>;
|
||
|
|
interrupts = <13>;
|
||
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_serial0: serial@90000 {
|
||
|
|
compatible = "arm,pl011", "arm,primecell";
|
||
|
|
reg = <0x090000 0x1000>;
|
||
|
|
interrupts = <5>;
|
||
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||
|
|
clock-names = "uartclk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_serial1: serial@a0000 {
|
||
|
|
compatible = "arm,pl011", "arm,primecell";
|
||
|
|
reg = <0x0a0000 0x1000>;
|
||
|
|
interrupts = <6>;
|
||
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||
|
|
clock-names = "uartclk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_serial2: serial@b0000 {
|
||
|
|
compatible = "arm,pl011", "arm,primecell";
|
||
|
|
reg = <0x0b0000 0x1000>;
|
||
|
|
interrupts = <7>;
|
||
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||
|
|
clock-names = "uartclk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_serial3: serial@c0000 {
|
||
|
|
compatible = "arm,pl011", "arm,primecell";
|
||
|
|
reg = <0x0c0000 0x1000>;
|
||
|
|
interrupts = <8>;
|
||
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||
|
|
clock-names = "uartclk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
watchdog@f0000 {
|
||
|
|
compatible = "arm,sp805", "arm,primecell";
|
||
|
|
reg = <0x0f0000 0x1000>;
|
||
|
|
interrupts = <0>;
|
||
|
|
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
||
|
|
clock-names = "wdog_clk", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_timer01: timer@110000 {
|
||
|
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
|
reg = <0x110000 0x1000>;
|
||
|
|
interrupts = <2>;
|
||
|
|
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
||
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_timer23: timer@120000 {
|
||
|
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
|
reg = <0x120000 0x1000>;
|
||
|
|
interrupts = <3>;
|
||
|
|
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
||
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* DVI I2C bus */
|
||
|
|
v2m_i2c_dvi: i2c@160000 {
|
||
|
|
compatible = "arm,versatile-i2c";
|
||
|
|
reg = <0x160000 0x1000>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
dvi-transmitter@39 {
|
||
|
|
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
||
|
|
reg = <0x39>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
dvi_bridge_in: endpoint {
|
||
|
|
remote-endpoint = <&clcd_pads>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
dvi-transmitter@60 {
|
||
|
|
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
||
|
|
reg = <0x60>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rtc@170000 {
|
||
|
|
compatible = "arm,pl031", "arm,primecell";
|
||
|
|
reg = <0x170000 0x1000>;
|
||
|
|
interrupts = <4>;
|
||
|
|
clocks = <&smbclk>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
};
|
||
|
|
|
||
|
|
compact-flash@1a0000 {
|
||
|
|
compatible = "arm,vexpress-cf", "ata-generic";
|
||
|
|
reg = <0x1a0000 0x100
|
||
|
|
0x1a0100 0xf00>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
clcd@1f0000 {
|
||
|
|
compatible = "arm,pl111", "arm,primecell";
|
||
|
|
reg = <0x1f0000 0x1000>;
|
||
|
|
interrupt-names = "combined";
|
||
|
|
interrupts = <14>;
|
||
|
|
clocks = <&v2m_oscclk1>, <&smbclk>;
|
||
|
|
clock-names = "clcdclk", "apb_pclk";
|
||
|
|
/* 800x600 16bpp @36MHz works fine */
|
||
|
|
max-memory-bandwidth = <54000000>;
|
||
|
|
memory-region = <&vram>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
clcd_pads: endpoint {
|
||
|
|
remote-endpoint = <&dvi_bridge_in>;
|
||
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mcc {
|
||
|
|
compatible = "arm,vexpress,config-bus";
|
||
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||
|
|
|
||
|
|
oscclk0 {
|
||
|
|
/* MCC static memory clock */
|
||
|
|
compatible = "arm,vexpress-osc";
|
||
|
|
arm,vexpress-sysreg,func = <1 0>;
|
||
|
|
freq-range = <25000000 60000000>;
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-output-names = "v2m:oscclk0";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_oscclk1: oscclk1 {
|
||
|
|
/* CLCD clock */
|
||
|
|
compatible = "arm,vexpress-osc";
|
||
|
|
arm,vexpress-sysreg,func = <1 1>;
|
||
|
|
freq-range = <23750000 65000000>;
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-output-names = "v2m:oscclk1";
|
||
|
|
};
|
||
|
|
|
||
|
|
v2m_oscclk2: oscclk2 {
|
||
|
|
/* IO FPGA peripheral clock */
|
||
|
|
compatible = "arm,vexpress-osc";
|
||
|
|
arm,vexpress-sysreg,func = <1 2>;
|
||
|
|
freq-range = <24000000 24000000>;
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-output-names = "v2m:oscclk2";
|
||
|
|
};
|
||
|
|
|
||
|
|
volt-vio {
|
||
|
|
/* Logic level voltage */
|
||
|
|
compatible = "arm,vexpress-volt";
|
||
|
|
arm,vexpress-sysreg,func = <2 0>;
|
||
|
|
regulator-name = "VIO";
|
||
|
|
regulator-always-on;
|
||
|
|
label = "VIO";
|
||
|
|
};
|
||
|
|
|
||
|
|
temp-mcc {
|
||
|
|
/* MCC internal operating temperature */
|
||
|
|
compatible = "arm,vexpress-temp";
|
||
|
|
arm,vexpress-sysreg,func = <4 0>;
|
||
|
|
label = "MCC";
|
||
|
|
};
|
||
|
|
|
||
|
|
reset {
|
||
|
|
compatible = "arm,vexpress-reset";
|
||
|
|
arm,vexpress-sysreg,func = <5 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
muxfpga {
|
||
|
|
compatible = "arm,vexpress-muxfpga";
|
||
|
|
arm,vexpress-sysreg,func = <7 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
shutdown {
|
||
|
|
compatible = "arm,vexpress-shutdown";
|
||
|
|
arm,vexpress-sysreg,func = <8 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reboot {
|
||
|
|
compatible = "arm,vexpress-reboot";
|
||
|
|
arm,vexpress-sysreg,func = <9 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dvimode {
|
||
|
|
compatible = "arm,vexpress-dvimode";
|
||
|
|
arm,vexpress-sysreg,func = <11 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|