321 lines
5.2 KiB
Plaintext
321 lines
5.2 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
// Copyright (c) 2016 ARM Ltd.
|
||
|
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include "sun50i-a64.dtsi"
|
||
|
#include "sun50i-a64-cpu-opp.dtsi"
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
||
|
/ {
|
||
|
model = "Pine64";
|
||
|
compatible = "pine64,pine64", "allwinner,sun50i-a64";
|
||
|
|
||
|
aliases {
|
||
|
ethernet0 = &emac;
|
||
|
serial0 = &uart0;
|
||
|
serial1 = &uart1;
|
||
|
serial2 = &uart2;
|
||
|
serial3 = &uart3;
|
||
|
serial4 = &uart4;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = "serial0:115200n8";
|
||
|
};
|
||
|
|
||
|
hdmi-connector {
|
||
|
compatible = "hdmi-connector";
|
||
|
type = "a";
|
||
|
|
||
|
port {
|
||
|
hdmi_con_in: endpoint {
|
||
|
remote-endpoint = <&hdmi_out_con>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&codec {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&codec_analog {
|
||
|
cpvdd-supply = <®_eldo1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&cpu0 {
|
||
|
cpu-supply = <®_dcdc2>;
|
||
|
};
|
||
|
|
||
|
&cpu1 {
|
||
|
cpu-supply = <®_dcdc2>;
|
||
|
};
|
||
|
|
||
|
&cpu2 {
|
||
|
cpu-supply = <®_dcdc2>;
|
||
|
};
|
||
|
|
||
|
&cpu3 {
|
||
|
cpu-supply = <®_dcdc2>;
|
||
|
};
|
||
|
|
||
|
&dai {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&de {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ehci0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ehci1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&emac {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&rmii_pins>;
|
||
|
phy-mode = "rmii";
|
||
|
phy-handle = <&ext_rmii_phy1>;
|
||
|
phy-supply = <®_dc1sw>;
|
||
|
status = "okay";
|
||
|
|
||
|
};
|
||
|
|
||
|
&hdmi {
|
||
|
hvcc-supply = <®_dldo1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&hdmi_out {
|
||
|
hdmi_out_con: endpoint {
|
||
|
remote-endpoint = <&hdmi_con_in>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c1_pins {
|
||
|
bias-pull-up;
|
||
|
};
|
||
|
|
||
|
&mdio {
|
||
|
ext_rmii_phy1: ethernet-phy@1 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
reg = <1>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&mmc0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&mmc0_pins>;
|
||
|
vmmc-supply = <®_dcdc1>;
|
||
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||
|
disable-wp;
|
||
|
bus-width = <4>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ohci0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ohci1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&r_rsb {
|
||
|
status = "okay";
|
||
|
|
||
|
axp803: pmic@3a3 {
|
||
|
compatible = "x-powers,axp803";
|
||
|
reg = <0x3a3>;
|
||
|
interrupt-parent = <&r_intc>;
|
||
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
#include "axp803.dtsi"
|
||
|
|
||
|
&ac_power_supply {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&battery_power_supply {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
®_aldo2 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc-pl";
|
||
|
};
|
||
|
|
||
|
®_aldo3 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <3000000>;
|
||
|
regulator-max-microvolt = <3000000>;
|
||
|
regulator-name = "vcc-pll-avcc";
|
||
|
};
|
||
|
|
||
|
®_dc1sw {
|
||
|
regulator-name = "vcc-phy";
|
||
|
};
|
||
|
|
||
|
®_dcdc1 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc-3v3";
|
||
|
};
|
||
|
|
||
|
®_dcdc2 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <1040000>;
|
||
|
regulator-max-microvolt = <1300000>;
|
||
|
regulator-name = "vdd-cpux";
|
||
|
};
|
||
|
|
||
|
/* DCDC3 is polyphased with DCDC2 */
|
||
|
|
||
|
/*
|
||
|
* The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
|
||
|
* work at 1.35V with less power consumption.
|
||
|
* As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
|
||
|
*/
|
||
|
®_dcdc5 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <1360000>;
|
||
|
regulator-max-microvolt = <1360000>;
|
||
|
regulator-name = "vcc-dram";
|
||
|
};
|
||
|
|
||
|
®_dcdc6 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <1100000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
regulator-name = "vdd-sys";
|
||
|
};
|
||
|
|
||
|
®_dldo1 {
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc-hdmi";
|
||
|
};
|
||
|
|
||
|
®_dldo2 {
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc-mipi";
|
||
|
};
|
||
|
|
||
|
®_dldo4 {
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc-wifi";
|
||
|
};
|
||
|
|
||
|
®_eldo1 {
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
regulator-name = "cpvdd";
|
||
|
};
|
||
|
|
||
|
®_fldo1 {
|
||
|
regulator-min-microvolt = <1200000>;
|
||
|
regulator-max-microvolt = <1200000>;
|
||
|
regulator-name = "vcc-1v2-hsic";
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* The A64 chip cannot work without this regulator off, although
|
||
|
* it seems to be only driving the AR100 core.
|
||
|
* Maybe we don't still know well about CPUs domain.
|
||
|
*/
|
||
|
®_fldo2 {
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <1100000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
regulator-name = "vdd-cpus";
|
||
|
};
|
||
|
|
||
|
®_rtc_ldo {
|
||
|
regulator-name = "vcc-rtc";
|
||
|
};
|
||
|
|
||
|
&simplefb_hdmi {
|
||
|
vcc-hdmi-supply = <®_dldo1>;
|
||
|
};
|
||
|
|
||
|
&sound {
|
||
|
simple-audio-card,aux-devs = <&codec_analog>;
|
||
|
simple-audio-card,widgets = "Microphone", "Microphone Jack",
|
||
|
"Headphone", "Headphone Jack";
|
||
|
simple-audio-card,routing =
|
||
|
"Left DAC", "DACL",
|
||
|
"Right DAC", "DACR",
|
||
|
"Headphone Jack", "HP",
|
||
|
"ADCL", "Left ADC",
|
||
|
"ADCR", "Right ADC",
|
||
|
"MIC2", "Microphone Jack";
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* On Euler connector */
|
||
|
&spdif {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
/* On Exp and Euler connectors */
|
||
|
&uart0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart0_pb_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* On Wifi/BT connector, with RTS/CTS */
|
||
|
&uart1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
/* On Pi-2 connector */
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart2_pins>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
/* On Euler connector */
|
||
|
&uart3 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart3_pins>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
/* On Euler connector, RTS/CTS optional */
|
||
|
&uart4 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart4_pins>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&usb_otg {
|
||
|
dr_mode = "host";
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usbphy {
|
||
|
status = "okay";
|
||
|
};
|