linux-zen-server/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts

603 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-08-30 17:53:23 +02:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
*/
/dts-v1/;
#include "meson-axg.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
model = "Amlogic Meson AXG S400 Development Board";
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-next {
label = "Next";
linux,code = <KEY_NEXT>;
press-threshold-microvolt = <1116000>; /* 62% */
};
button-prev {
label = "Previous";
linux,code = <KEY_PREVIOUS>;
press-threshold-microvolt = <900000>; /* 50% */
};
button-wifi {
label = "Wifi";
linux,code = <KEY_WLAN>;
press-threshold-microvolt = <684000>; /* 38% */
};
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <468000>; /* 26% */
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <252000>; /* 14% */
};
button-voice {
label = "Voice";
linux,code = <KEY_VOICECOMMAND>;
press-threshold-microvolt = <0>; /* 0% */
};
};
aliases {
serial0 = &uart_AO;
serial1 = &uart_A;
};
linein: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "everest,es7241";
VDDA-supply = <&vcc_3v3>;
VDDP-supply = <&vcc_3v3>;
VDDD-supply = <&vcc_3v3>;
status = "okay";
sound-name-prefix = "Linein";
};
lineout: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "everest,es7154";
VDD-supply = <&vcc_3v3>;
PVDD-supply = <&vcc_5v>;
status = "okay";
sound-name-prefix = "Lineout";
};
spdif_dit: audio-codec-2 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
status = "okay";
sound-name-prefix = "DIT";
};
dmics: audio-codec-3 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <7>;
wakeup-delay-ms = <50>;
status = "okay";
sound-name-prefix = "MIC";
};
spdif_dir: audio-codec-4 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dir";
status = "okay";
sound-name-prefix = "DIR";
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vcc_5v: regulator-vcc_5v {
compatible = "regulator-fixed";
regulator-name = "VCC5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&main_12v>;
gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&main_12v>;
regulator-always-on;
};
vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
usb_pwr: regulator-usb_pwr {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_5v>;
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
speaker-leds {
compatible = "gpio-leds";
aled1 {
label = "speaker:aled1";
gpios = <&gpio_speaker 7 0>;
};
aled2 {
label = "speaker:aled2";
gpios = <&gpio_speaker 6 0>;
};
aled3 {
label = "speaker:aled3";
gpios = <&gpio_speaker 5 0>;
};
aled4 {
label = "speaker:aled4";
gpios = <&gpio_speaker 4 0>;
};
aled5 {
label = "speaker:aled5";
gpios = <&gpio_speaker 3 0>;
};
aled6 {
label = "speaker:aled6";
gpios = <&gpio_speaker 2 0>;
};
};
sound {
compatible = "amlogic,axg-sound-card";
model = "AXG-S400";
audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
<&tdmin_lb>, <&tdmout_c>;
audio-widgets = "Line", "Lineout",
"Line", "Linein",
"Speaker", "Speaker1 Left",
"Speaker", "Speaker1 Right";
audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
"SPDIFOUT IN 0", "FRDDR_A OUT 3",
"TDMOUT_C IN 1", "FRDDR_B OUT 2",
"SPDIFOUT IN 1", "FRDDR_B OUT 3",
"TDMOUT_C IN 2", "FRDDR_C OUT 2",
"SPDIFOUT IN 2", "FRDDR_C OUT 3",
"TDM_C Playback", "TDMOUT_C OUT",
"TDMIN_A IN 2", "TDM_C Capture",
"TDMIN_A IN 5", "TDM_C Loopback",
"TDMIN_B IN 2", "TDM_C Capture",
"TDMIN_B IN 5", "TDM_C Loopback",
"TDMIN_C IN 2", "TDM_C Capture",
"TDMIN_C IN 5", "TDM_C Loopback",
"TDMIN_LB IN 2", "TDM_C Loopback",
"TDMIN_LB IN 5", "TDM_C Capture",
"TODDR_A IN 0", "TDMIN_A OUT",
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT",
"TODDR_A IN 1", "TDMIN_B OUT",
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT",
"TODDR_A IN 2", "TDMIN_C OUT",
"TODDR_B IN 2", "TDMIN_C OUT",
"TODDR_C IN 2", "TDMIN_C OUT",
"TODDR_A IN 3", "SPDIFIN Capture",
"TODDR_B IN 3", "SPDIFIN Capture",
"TODDR_C IN 3", "SPDIFIN Capture",
"TODDR_A IN 4", "PDM Capture",
"TODDR_B IN 4", "PDM Capture",
"TODDR_C IN 4", "PDM Capture",
"TODDR_A IN 6", "TDMIN_LB OUT",
"TODDR_B IN 6", "TDMIN_LB OUT",
"TODDR_C IN 6", "TDMIN_LB OUT",
"Lineout", "Lineout AOUTL",
"Lineout", "Lineout AOUTR",
"Speaker1 Left", "SPK1 OUT_A",
"Speaker1 Left", "SPK1 OUT_B",
"Speaker1 Right", "SPK1 OUT_C",
"Speaker1 Right", "SPK1 OUT_D",
"Linein AINL", "Linein",
"Linein AINR", "Linein";
assigned-clocks = <&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <589824000>,
<270950400>,
<393216000>;
status = "okay";
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link-2 {
sound-dai = <&frddr_c>;
};
dai-link-3 {
sound-dai = <&toddr_a>;
};
dai-link-4 {
sound-dai = <&toddr_b>;
};
dai-link-5 {
sound-dai = <&toddr_c>;
};
dai-link-6 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-rx-mask-1 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&lineout>;
};
codec-1 {
sound-dai = <&speaker_amp1>;
};
codec-2 {
sound-dai = <&linein>;
};
};
dai-link-7 {
sound-dai = <&spdifout>;
codec {
sound-dai = <&spdif_dit>;
};
};
dai-link-8 {
sound-dai = <&spdifin>;
codec {
sound-dai = <&spdif_dir>;
};
};
dai-link-9 {
sound-dai = <&pdm>;
codec {
sound-dai = <&dmics>;
};
};
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
};
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_y_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
interrupt-parent = <&gpio_intc>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
eee-broken-1000t;
};
};
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&i2c1 {
status = "okay";
pinctrl-0 = <&i2c1_z_pins>;
pinctrl-names = "default";
speaker_amp1: audio-codec@1b {
compatible = "ti,tas5707";
reg = <0x1b>;
reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
AVDD-supply = <&vcc_3v3>;
DVDD-supply = <&vcc_3v3>;
PVDD_A-supply = <&main_12v>;
PVDD_B-supply = <&main_12v>;
PVDD_C-supply = <&main_12v>;
PVDD_D-supply = <&main_12v>;
sound-name-prefix = "SPK1";
};
};
&i2c_AO {
status = "okay";
pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
pinctrl-names = "default";
gpio_speaker: gpio-controller@1f {
compatible = "nxp,pca9557";
reg = <0x1f>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&vddao_3v3>;
};
};
&pdm {
pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
<&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
pinctrl-names = "default";
status = "okay";
};
&pcieA {
reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pcieB {
reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&pwm_ab {
status = "okay";
pinctrl-0 = <&pwm_a_x20_pins>;
pinctrl-names = "default";
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
};
/* wifi module */
&sd_emmc_b {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr104;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* emmc storage */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&spdifin {
pinctrl-0 = <&spdif_in_a19_pins>;
pinctrl-names = "default";
status = "okay";
};
&spdifout {
pinctrl-0 = <&spdif_out_a20_pins>;
pinctrl-names = "default";
status = "okay";
};
&tdmif_a {
pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
<&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
pinctrl-names = "default";
status = "okay";
};
&tdmif_b {
pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
<&tdmb_din3_pins>, <&mclk_b_pins>;
pinctrl-names = "default";
status = "okay";
};
&tdmif_c {
pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
<&tdmc_din1_pins>, <&tdmc_dout2_pins>,
<&mclk_c_pins>;
pinctrl-names = "default";
status = "okay";
};
&tdmin_a {
status = "okay";
};
&tdmin_b {
status = "okay";
};
&tdmin_c {
status = "okay";
};
&tdmin_lb {
status = "okay";
};
&tdmout_c {
status = "okay";
};
&toddr_a {
status = "okay";
};
&toddr_b {
status = "okay";
};
&toddr_c {
status = "okay";
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb {
status = "okay";
dr_mode = "otg";
vbus-supply = <&usb_pwr>;
};