950 lines
19 KiB
Plaintext
950 lines
19 KiB
Plaintext
|
// SPDX-License-Identifier: BSD-3-Clause
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||
|
|
* <angelogioacchino.delregno@somainline.org>
|
||
|
|
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "msm8996.dtsi"
|
||
|
|
#include "pm8994.dtsi"
|
||
|
|
#include "pmi8994.dtsi"
|
||
|
|
#include "pmi8996.dtsi"
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||
|
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||
|
|
|
||
|
|
/delete-node/ &adsp_mem;
|
||
|
|
/delete-node/ &slpi_mem;
|
||
|
|
/delete-node/ &venus_mem;
|
||
|
|
/delete-node/ &gpu_mem;
|
||
|
|
|
||
|
|
/ {
|
||
|
|
qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
|
||
|
|
qcom,board-id = <8 0>;
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
bootargs = "maxcpus=2";
|
||
|
|
};
|
||
|
|
|
||
|
|
reserved-memory {
|
||
|
|
ramoops@a7f00000 {
|
||
|
|
compatible = "ramoops";
|
||
|
|
reg = <0 0xa7f00000 0 0x100000>;
|
||
|
|
record-size = <0x20000>;
|
||
|
|
console-size = <0x40000>;
|
||
|
|
ftrace-size = <0x20000>;
|
||
|
|
pmsg-size = <0x20000>;
|
||
|
|
ecc-size = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adsp_mem: adsp@8ea00000 {
|
||
|
|
reg = <0x0 0x8ea00000 0x0 0x1a00000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpu_mem: gpu@90400000 {
|
||
|
|
compatible = "shared-dma-pool";
|
||
|
|
reg = <0x0 0x90400000 0x0 0x2000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
slpi_mem: memory@90500000 {
|
||
|
|
reg = <0 0x90500000 0 0xa00000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
venus_mem: memory@90f00000 {
|
||
|
|
reg = <0 0x90f00000 0 0x500000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
panel_tvdd: tvdd-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "panel_tvdd";
|
||
|
|
gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-0 = <&tp_vddio_en>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb3_id: usb3-id {
|
||
|
|
compatible = "linux,extcon-usb-gpio";
|
||
|
|
id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&usb_detect>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vph_pwr: vph-pwr-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-min-microvolt = <3700000>;
|
||
|
|
regulator-max-microvolt = <3700000>;
|
||
|
|
regulator-name = "vph_pwr";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_en: wlan-en-1-8v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "wlan-en-regulator";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wl_reg_on>;
|
||
|
|
|
||
|
|
/* WLAN card specific delay */
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_i2c3 {
|
||
|
|
clock-frequency = <355000>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
tof_sensor: vl53l0x@29 {
|
||
|
|
compatible = "st,vl53l0x";
|
||
|
|
reg = <0x29>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_i2c5 {
|
||
|
|
clock-frequency = <355000>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/* FUSB301 USB-C controller */
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_i2c6 {
|
||
|
|
clock-frequency = <355000>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
synaptics@2c {
|
||
|
|
compatible = "syna,rmi4-i2c";
|
||
|
|
reg = <0x2c>;
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
vdd-supply = <&panel_tvdd>;
|
||
|
|
|
||
|
|
syna,reset-delay-ms = <220>;
|
||
|
|
syna,startup-delay-ms = <220>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
rmi4-f01@1 {
|
||
|
|
reg = <0x1>;
|
||
|
|
syna,nosleep-mode = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
rmi4-f11@11 {
|
||
|
|
reg = <0x11>;
|
||
|
|
syna,sensor-type = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_uart2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera0_mclk {
|
||
|
|
drive-strength = <2>;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera0_pwdn {
|
||
|
|
drive-strength = <2>;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera0_rst {
|
||
|
|
pins = "gpio30";
|
||
|
|
drive-strength = <2>;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera2_mclk {
|
||
|
|
drive-strength = <2>;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera2_rst {
|
||
|
|
drive-strength = <2>;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
&hsusb_phy1 {
|
||
|
|
vdd-supply = <&pm8994_l28>;
|
||
|
|
vdda-pll-supply = <&pm8994_l12>;
|
||
|
|
vdda-phy-dpdm-supply = <&pm8994_l24>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmcc {
|
||
|
|
vdd-gfx-supply = <&vdd_gfx>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie0 {
|
||
|
|
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
||
|
|
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||
|
|
vddpe-3v3-supply = <&wlan_en>;
|
||
|
|
vdda-supply = <&pm8994_l28>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie_phy {
|
||
|
|
vdda-phy-supply = <&pm8994_l28>;
|
||
|
|
vdda-pll-supply = <&pm8994_l12>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_gpios {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pm8994_gpios_defaults>;
|
||
|
|
gpio-line-names =
|
||
|
|
"NC",
|
||
|
|
"VOL_DOWN_N",
|
||
|
|
"VOL_UP_N",
|
||
|
|
"SNAPSHOT_N",
|
||
|
|
"FOCUS_N",
|
||
|
|
"NC",
|
||
|
|
"NFC_VEN",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"EAR_EN",
|
||
|
|
"NC",
|
||
|
|
"PM_DIVCLK1",
|
||
|
|
"PMI_CLK",
|
||
|
|
"NC",
|
||
|
|
"WL_SLEEP_CLK",
|
||
|
|
"NC",
|
||
|
|
"PMIC_SPON",
|
||
|
|
"UIM_BATT_ALARM",
|
||
|
|
"PMK_SLEEP_CLK";
|
||
|
|
|
||
|
|
/*
|
||
|
|
* We don't yet know for sure which GPIOs are of our interest, but what
|
||
|
|
* we do know is that if a vendor sets the pins to a non-default state, there's
|
||
|
|
* probably a reason for it, and just to be on the safe side, we follow suit.
|
||
|
|
*/
|
||
|
|
pm8994_gpios_defaults: pm8994-gpios-default-state {
|
||
|
|
pm8994-gpio1-nc-pins {
|
||
|
|
pins = "gpio1";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
};
|
||
|
|
|
||
|
|
vol-down-n-pins {
|
||
|
|
pins = "gpio2";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vol-up-n-pins {
|
||
|
|
pins = "gpio3";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
camera-snapshot-n-pins {
|
||
|
|
pins = "gpio4";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
camera-focus-n-pins {
|
||
|
|
pins = "gpio5";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio6-nc-pins {
|
||
|
|
pins = "gpio6";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
nfc-download-pins {
|
||
|
|
pins = "gpio7";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-low;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-disable;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio8-nc-pins {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-low;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio9-nc-pins {
|
||
|
|
pins = "gpio9";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-high;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
nfc-clock-pins {
|
||
|
|
pins = "gpio10";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
input-enable;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-pull-down;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio11-nc-pins {
|
||
|
|
pins = "gpio11";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio12-nc-pins {
|
||
|
|
pins = "gpio12";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ear-enable-pins {
|
||
|
|
pins = "gpio13";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-high;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-disable;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio14-nc-pins {
|
||
|
|
pins = "gpio14";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm-divclk1-gpio-pins {
|
||
|
|
pins = "gpio15";
|
||
|
|
function = "func1";
|
||
|
|
output-high;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-clk-gpio-pins {
|
||
|
|
pins = "gpio16";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio17-nc-pins {
|
||
|
|
pins = "gpio17";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
rome-sleep-pins {
|
||
|
|
pins = "gpio18";
|
||
|
|
function = PMIC_GPIO_FUNC_FUNC2;
|
||
|
|
output-low;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-disable;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio19-nc-pins {
|
||
|
|
pins = "gpio19";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-low;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994-gpio22-nc-pins {
|
||
|
|
pins = "gpio22";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_mpps {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pm8994_mpps_defaults>;
|
||
|
|
|
||
|
|
gpio-line-names =
|
||
|
|
"SDC_UIM_VBIAS",
|
||
|
|
"LCD_ID_ADC",
|
||
|
|
"VREF_DACX",
|
||
|
|
"NC",
|
||
|
|
"FLASH_THERM",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"RF_ID";
|
||
|
|
|
||
|
|
pm8994_mpps_defaults: pm8994-mpps-default-state {
|
||
|
|
lcd-id_adc-mpp-pins {
|
||
|
|
pins = "mpp2";
|
||
|
|
function = "analog";
|
||
|
|
input-enable;
|
||
|
|
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm-mpp4-nc-pins {
|
||
|
|
pins = "mpp4";
|
||
|
|
function = "digital";
|
||
|
|
bias-high-impedance;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
flash-therm-mpp-pins {
|
||
|
|
pins = "mpp5";
|
||
|
|
function = "analog";
|
||
|
|
input-enable;
|
||
|
|
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mpp6-nc-pins {
|
||
|
|
pins = "mpp6";
|
||
|
|
function = "digital";
|
||
|
|
bias-high-impedance;
|
||
|
|
};
|
||
|
|
|
||
|
|
rf-id-mpp-pins {
|
||
|
|
pins = "mpp8";
|
||
|
|
function = "analog";
|
||
|
|
input-enable;
|
||
|
|
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_resin {
|
||
|
|
linux,code = <KEY_VOLUMEUP>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_gpios {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pmi8994_gpios_defaults>;
|
||
|
|
|
||
|
|
gpio-line-names =
|
||
|
|
"VIB_LDO_EN",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"USB_SWITCH_SEL",
|
||
|
|
"NC";
|
||
|
|
|
||
|
|
pmi8994_gpios_defaults: pmi8994-gpios-default-state {
|
||
|
|
vib-ldo-en-gpio-pins {
|
||
|
|
pins = "gpio1";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-low;
|
||
|
|
bias-disable;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio2-nc-pins {
|
||
|
|
pins = "gpio2";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio3-nc-pins {
|
||
|
|
pins = "gpio3";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
input-enable;
|
||
|
|
bias-high-impedance;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio4-nc-pins {
|
||
|
|
pins = "gpio4";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio5-nc-pins {
|
||
|
|
pins = "gpio5";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio6-nc-pins {
|
||
|
|
pins = "gpio6";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio7-nc-pins {
|
||
|
|
pins = "gpio7";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio8-nc-pins {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
usb-switch-sel-pins {
|
||
|
|
pins = "gpio9";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
drive-push-pull;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmi-gpio10-nc-pins {
|
||
|
|
pins = "gpio10";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-low;
|
||
|
|
drive-push-pull;
|
||
|
|
bias-disable;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_spmi_regulators {
|
||
|
|
qcom,saw-reg = <&saw3>;
|
||
|
|
|
||
|
|
pm8994_s9: s9 {
|
||
|
|
qcom,saw-slave;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_s10: s10 {
|
||
|
|
qcom,saw-slave;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_s11: s11 {
|
||
|
|
qcom,saw-leader;
|
||
|
|
regulator-name = "vdd_apcc";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <470000>;
|
||
|
|
regulator-max-microvolt = <1140000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_spmi_regulators {
|
||
|
|
vdd_gfx:
|
||
|
|
pmi8994_s2: s2 {
|
||
|
|
/* Pinned to a high value for now to avoid random crashes. */
|
||
|
|
regulator-min-microvolt = <1015000>;
|
||
|
|
regulator-max-microvolt = <1015000>;
|
||
|
|
regulator-name = "vdd_gfx";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_wled {
|
||
|
|
default-brightness = <512>;
|
||
|
|
qcom,num-strings = <3>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&rpm_requests {
|
||
|
|
regulators-0 {
|
||
|
|
compatible = "qcom,rpm-pm8994-regulators";
|
||
|
|
|
||
|
|
vdd_s1-supply = <&vph_pwr>;
|
||
|
|
vdd_s2-supply = <&vph_pwr>;
|
||
|
|
vdd_s3-supply = <&vph_pwr>;
|
||
|
|
vdd_s4-supply = <&vph_pwr>;
|
||
|
|
vdd_s5-supply = <&vph_pwr>;
|
||
|
|
vdd_s6-supply = <&vph_pwr>;
|
||
|
|
vdd_s7-supply = <&vph_pwr>;
|
||
|
|
vdd_s8-supply = <&vph_pwr>;
|
||
|
|
vdd_s9-supply = <&vph_pwr>;
|
||
|
|
vdd_s10-supply = <&vph_pwr>;
|
||
|
|
vdd_s11-supply = <&vph_pwr>;
|
||
|
|
vdd_s12-supply = <&vph_pwr>;
|
||
|
|
vdd_l1-supply = <&pm8994_s3>;
|
||
|
|
vdd_l2_l26_l28-supply = <&pm8994_s3>;
|
||
|
|
vdd_l3_l11-supply = <&pm8994_s3>;
|
||
|
|
vdd_l4_l27_l31-supply = <&pm8994_s3>;
|
||
|
|
vdd_l5_l7-supply = <&pm8994_s5>;
|
||
|
|
vdd_l6_l12_l32-supply = <&pm8994_s5>;
|
||
|
|
vdd_l8_l16_l30-supply = <&vph_pwr>;
|
||
|
|
vdd_l14_l15-supply = <&pm8994_s5>;
|
||
|
|
vdd_l20_l21-supply = <&pm8994_s5>;
|
||
|
|
vdd_l25-supply = <&pm8994_s3>;
|
||
|
|
vdd_lvs1_2-supply = <&pm8994_s4>;
|
||
|
|
|
||
|
|
pm8994_s3: s3 {
|
||
|
|
regulator-min-microvolt = <1300000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_s4: s4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-system-load = <325000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_s5: s5 {
|
||
|
|
regulator-min-microvolt = <2150000>;
|
||
|
|
regulator-max-microvolt = <2150000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_s7: s7 {
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l1: l1 {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l2: l2 {
|
||
|
|
regulator-min-microvolt = <1250000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l3: l3 {
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l4: l4 {
|
||
|
|
regulator-min-microvolt = <1225000>;
|
||
|
|
regulator-max-microvolt = <1225000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* L6 and L7 seem unused. */
|
||
|
|
|
||
|
|
pm8994_l8: l8 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l9: l9 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l10: l10 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l11: l11 {
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l12: l12 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l13: l13 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
regulator-system-load = <22000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l14: l14 {
|
||
|
|
regulator-min-microvolt = <1700000>;
|
||
|
|
regulator-max-microvolt = <1900000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l15: l15 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l16: l16 {
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <2700000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l17: l17 {
|
||
|
|
regulator-min-microvolt = <2200000>;
|
||
|
|
regulator-max-microvolt = <2500000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l18: l18 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l19: l19 {
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l20: l20 {
|
||
|
|
regulator-min-microvolt = <2950000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
regulator-system-load = <570000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l21: l21 {
|
||
|
|
regulator-min-microvolt = <2950000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
regulator-system-load = <800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l22: l22 {
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l23: l23 {
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <2700000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l24: l24 {
|
||
|
|
regulator-min-microvolt = <3075000>;
|
||
|
|
regulator-max-microvolt = <3075000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l25: l25 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l27: l27 {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l28: l28 {
|
||
|
|
regulator-min-microvolt = <925000>;
|
||
|
|
regulator-max-microvolt = <925000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l29: l29 {
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <2700000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8994_l30: l30 { };
|
||
|
|
|
||
|
|
pm8994_l32: l32 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc1 {
|
||
|
|
vmmc-supply = <&pm8994_l20>;
|
||
|
|
vqmmc-supply = <&pm8994_s4>;
|
||
|
|
mmc-hs400-1_8v;
|
||
|
|
mmc-hs200-1_8v;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc2 {
|
||
|
|
cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
|
||
|
|
vmmc-supply = <&pm8994_l21>;
|
||
|
|
vqmmc-supply = <&pm8994_l13>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&tlmm {
|
||
|
|
gpio-reserved-ranges = <0 4>;
|
||
|
|
pinctrl-0 = <&sw_service_gpio>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
disp_reset_n_gpio: disp-reset-n-state {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
mdp_vsync_p_gpio: mdp-vsync-p-state {
|
||
|
|
pins = "gpio10";
|
||
|
|
function = "mdp_vsync";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw_service_gpio: sw-service-gpio-state {
|
||
|
|
pins = "gpio16";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_detect: usb-detect-state {
|
||
|
|
pins = "gpio25";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
output-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
uim_detect_en: uim-detect-en-state {
|
||
|
|
pins = "gpio29";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
output-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
tray_det_pin: tray-det-state {
|
||
|
|
pins = "gpio40";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
tp_vddio_en: tp-vddio-en-state {
|
||
|
|
pins = "gpio50";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
output-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
lcd_vddio_en: lcd-vddio-en-state {
|
||
|
|
pins = "gpio51";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
wl_host_wake: wl-host-wake-state {
|
||
|
|
pins = "gpio79";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
wl_reg_on: wl-reg-on-state {
|
||
|
|
pins = "gpio84";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
output-low;
|
||
|
|
};
|
||
|
|
|
||
|
|
ts_reset_n: ts-rst-n-state {
|
||
|
|
pins = "gpio89";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
touch_int_n: touch-int-n-state {
|
||
|
|
pins = "gpio125";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
touch_int_sleep: touch-int-sleep-state {
|
||
|
|
pins = "gpio125";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3 {
|
||
|
|
qcom,select-utmi-as-pipe-clk;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3_dwc3 {
|
||
|
|
extcon = <&usb3_id>;
|
||
|
|
dr_mode = "peripheral";
|
||
|
|
maximum-speed = "high-speed";
|
||
|
|
phys = <&hsusb_phy1>;
|
||
|
|
phy-names = "usb2-phy";
|
||
|
|
snps,hird-threshold = /bits/ 8 <0>;
|
||
|
|
};
|