105 lines
2.0 KiB
Plaintext
105 lines
2.0 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2022, Linaro Ltd.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "sdm845-db845c.dts"
|
||
|
|
|
||
|
|
&camss {
|
||
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||
|
|
vdda-pll-supply = <&vreg_l26a_1p2>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
port@0 {
|
||
|
|
csiphy0_ep: endpoint {
|
||
|
|
data-lanes = <0 1 2 3>;
|
||
|
|
remote-endpoint = <&ov8856_ep>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cci {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cci_i2c0 {
|
||
|
|
camera@10 {
|
||
|
|
compatible = "ovti,ov8856";
|
||
|
|
reg = <0x10>;
|
||
|
|
|
||
|
|
/* CAM0_RST_N */
|
||
|
|
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&cam0_default>;
|
||
|
|
|
||
|
|
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
|
||
|
|
clock-names = "xvclk";
|
||
|
|
clock-frequency = <19200000>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The &vreg_s4a_1p8 trace is powered on as a,
|
||
|
|
* so it is represented by a fixed regulator.
|
||
|
|
*
|
||
|
|
* The 2.8V vdda-supply and 1.2V vddd-supply regulators
|
||
|
|
* both have to be enabled through the power management
|
||
|
|
* gpios.
|
||
|
|
*/
|
||
|
|
dovdd-supply = <&vreg_lvs1a_1p8>;
|
||
|
|
avdd-supply = <&cam0_avdd_2v8>;
|
||
|
|
dvdd-supply = <&cam0_dvdd_1v2>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
ov8856_ep: endpoint {
|
||
|
|
link-frequencies = /bits/ 64
|
||
|
|
<360000000 180000000>;
|
||
|
|
data-lanes = <1 2 3 4>;
|
||
|
|
remote-endpoint = <&csiphy0_ep>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cci_i2c1 {
|
||
|
|
camera@60 {
|
||
|
|
compatible = "ovti,ov7251";
|
||
|
|
|
||
|
|
/* I2C address as per ov7251.txt linux documentation */
|
||
|
|
reg = <0x60>;
|
||
|
|
|
||
|
|
/* CAM3_RST_N */
|
||
|
|
enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&cam3_default>;
|
||
|
|
|
||
|
|
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
|
||
|
|
clock-names = "xclk";
|
||
|
|
clock-frequency = <24000000>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The &vreg_s4a_1p8 trace always powered on.
|
||
|
|
*
|
||
|
|
* The 2.8V vdda-supply regulator is enabled when the
|
||
|
|
* vreg_s4a_1p8 trace is pulled high.
|
||
|
|
* It too is represented by a fixed regulator.
|
||
|
|
*
|
||
|
|
* No 1.2V vddd-supply regulator is used.
|
||
|
|
*/
|
||
|
|
vdddo-supply = <&vreg_lvs1a_1p8>;
|
||
|
|
vdda-supply = <&cam3_avdd_2v8>;
|
||
|
|
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
port {
|
||
|
|
ov7251_ep: endpoint {
|
||
|
|
data-lanes = <0 1>;
|
||
|
|
/* remote-endpoint = <&csiphy3_ep>; */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|