linux-zen-server/drivers/gpu/drm/panel/panel-sitronix-st7701.c

796 lines
25 KiB
C
Raw Permalink Normal View History

2023-08-30 17:53:23 +02:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019, Amarula Solutions.
* Author: Jagan Teki <jagan@amarulasolutions.com>
*/
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <linux/bitfield.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
/* Command2 BKx selection command */
#define DSI_CMD2BKX_SEL 0xFF
#define DSI_CMD1 0
#define DSI_CMD2 BIT(4)
#define DSI_CMD2BK_MASK GENMASK(3, 0)
/* Command2, BK0 commands */
#define DSI_CMD2_BK0_PVGAMCTRL 0xB0 /* Positive Voltage Gamma Control */
#define DSI_CMD2_BK0_NVGAMCTRL 0xB1 /* Negative Voltage Gamma Control */
#define DSI_CMD2_BK0_LNESET 0xC0 /* Display Line setting */
#define DSI_CMD2_BK0_PORCTRL 0xC1 /* Porch control */
#define DSI_CMD2_BK0_INVSEL 0xC2 /* Inversion selection, Frame Rate Control */
/* Command2, BK1 commands */
#define DSI_CMD2_BK1_VRHS 0xB0 /* Vop amplitude setting */
#define DSI_CMD2_BK1_VCOM 0xB1 /* VCOM amplitude setting */
#define DSI_CMD2_BK1_VGHSS 0xB2 /* VGH Voltage setting */
#define DSI_CMD2_BK1_TESTCMD 0xB3 /* TEST Command Setting */
#define DSI_CMD2_BK1_VGLS 0xB5 /* VGL Voltage setting */
#define DSI_CMD2_BK1_PWCTLR1 0xB7 /* Power Control 1 */
#define DSI_CMD2_BK1_PWCTLR2 0xB8 /* Power Control 2 */
#define DSI_CMD2_BK1_SPD1 0xC1 /* Source pre_drive timing set1 */
#define DSI_CMD2_BK1_SPD2 0xC2 /* Source EQ2 Setting */
#define DSI_CMD2_BK1_MIPISET1 0xD0 /* MIPI Setting 1 */
/* Command2, BK0 bytes */
#define DSI_CMD2_BK0_GAMCTRL_AJ_MASK GENMASK(7, 6)
#define DSI_CMD2_BK0_GAMCTRL_VC0_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC4_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC8_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC16_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC24_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC52_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC80_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC108_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC147_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC175_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC203_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC231_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC239_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC247_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC251_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC255_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_LNESET_LINE_MASK GENMASK(6, 0)
#define DSI_CMD2_BK0_LNESET_LDE_EN BIT(7)
#define DSI_CMD2_BK0_LNESET_LINEDELTA GENMASK(1, 0)
#define DSI_CMD2_BK0_PORCTRL_VBP_MASK GENMASK(7, 0)
#define DSI_CMD2_BK0_PORCTRL_VFP_MASK GENMASK(7, 0)
#define DSI_CMD2_BK0_INVSEL_ONES_MASK GENMASK(5, 4)
#define DSI_CMD2_BK0_INVSEL_NLINV_MASK GENMASK(2, 0)
#define DSI_CMD2_BK0_INVSEL_RTNI_MASK GENMASK(4, 0)
/* Command2, BK1 bytes */
#define DSI_CMD2_BK1_VRHA_MASK GENMASK(7, 0)
#define DSI_CMD2_BK1_VCOM_MASK GENMASK(7, 0)
#define DSI_CMD2_BK1_VGHSS_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_TESTCMD_VAL BIT(7)
#define DSI_CMD2_BK1_VGLS_ONES BIT(6)
#define DSI_CMD2_BK1_VGLS_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_PWRCTRL1_AP_MASK GENMASK(7, 6)
#define DSI_CMD2_BK1_PWRCTRL1_APIS_MASK GENMASK(3, 2)
#define DSI_CMD2_BK1_PWRCTRL1_APOS_MASK GENMASK(1, 0)
#define DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK GENMASK(5, 4)
#define DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK GENMASK(1, 0)
#define DSI_CMD2_BK1_SPD1_ONES_MASK GENMASK(6, 4)
#define DSI_CMD2_BK1_SPD1_T2D_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_SPD2_ONES_MASK GENMASK(6, 4)
#define DSI_CMD2_BK1_SPD2_T3D_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_MIPISET1_ONES BIT(7)
#define DSI_CMD2_BK1_MIPISET1_EOT_EN BIT(3)
#define CFIELD_PREP(_mask, _val) \
(((typeof(_mask))(_val) << (__builtin_ffsll(_mask) - 1)) & (_mask))
enum op_bias {
OP_BIAS_OFF = 0,
OP_BIAS_MIN,
OP_BIAS_MIDDLE,
OP_BIAS_MAX
};
struct st7701;
struct st7701_panel_desc {
const struct drm_display_mode *mode;
unsigned int lanes;
enum mipi_dsi_pixel_format format;
unsigned int panel_sleep_delay;
/* TFT matrix driver configuration, panel specific. */
const u8 pv_gamma[16]; /* Positive voltage gamma control */
const u8 nv_gamma[16]; /* Negative voltage gamma control */
const u8 nlinv; /* Inversion selection */
const u32 vop_uv; /* Vop in uV */
const u32 vcom_uv; /* Vcom in uV */
const u16 vgh_mv; /* Vgh in mV */
const s16 vgl_mv; /* Vgl in mV */
const u16 avdd_mv; /* Avdd in mV */
const s16 avcl_mv; /* Avcl in mV */
const enum op_bias gamma_op_bias;
const enum op_bias input_op_bias;
const enum op_bias output_op_bias;
const u16 t2d_ns; /* T2D in ns */
const u16 t3d_ns; /* T3D in ns */
const bool eot_en;
/* GIP sequence, fully custom and undocumented. */
void (*gip_sequence)(struct st7701 *st7701);
};
struct st7701 {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
const struct st7701_panel_desc *desc;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset;
unsigned int sleep_delay;
};
static inline struct st7701 *panel_to_st7701(struct drm_panel *panel)
{
return container_of(panel, struct st7701, panel);
}
static inline int st7701_dsi_write(struct st7701 *st7701, const void *seq,
size_t len)
{
return mipi_dsi_dcs_write_buffer(st7701->dsi, seq, len);
}
#define ST7701_DSI(st7701, seq...) \
{ \
const u8 d[] = { seq }; \
st7701_dsi_write(st7701, d, ARRAY_SIZE(d)); \
}
static u8 st7701_vgls_map(struct st7701 *st7701)
{
const struct st7701_panel_desc *desc = st7701->desc;
struct {
s32 vgl;
u8 val;
} map[16] = {
{ -7060, 0x0 }, { -7470, 0x1 },
{ -7910, 0x2 }, { -8140, 0x3 },
{ -8650, 0x4 }, { -8920, 0x5 },
{ -9210, 0x6 }, { -9510, 0x7 },
{ -9830, 0x8 }, { -10170, 0x9 },
{ -10530, 0xa }, { -10910, 0xb },
{ -11310, 0xc }, { -11730, 0xd },
{ -12200, 0xe }, { -12690, 0xf }
};
int i;
for (i = 0; i < ARRAY_SIZE(map); i++)
if (desc->vgl_mv == map[i].vgl)
return map[i].val;
return 0;
}
static void st7701_switch_cmd_bkx(struct st7701 *st7701, bool cmd2, u8 bkx)
{
u8 val;
if (cmd2)
val = DSI_CMD2 | FIELD_PREP(DSI_CMD2BK_MASK, bkx);
else
val = DSI_CMD1;
ST7701_DSI(st7701, DSI_CMD2BKX_SEL, 0x77, 0x01, 0x00, 0x00, val);
}
static void st7701_init_sequence(struct st7701 *st7701)
{
const struct st7701_panel_desc *desc = st7701->desc;
const struct drm_display_mode *mode = desc->mode;
const u8 linecount8 = mode->vdisplay / 8;
const u8 linecountrem2 = (mode->vdisplay % 8) / 2;
ST7701_DSI(st7701, MIPI_DCS_SOFT_RESET, 0x00);
/* We need to wait 5ms before sending new commands */
msleep(5);
ST7701_DSI(st7701, MIPI_DCS_EXIT_SLEEP_MODE, 0x00);
msleep(st7701->sleep_delay);
/* Command2, BK0 */
st7701_switch_cmd_bkx(st7701, true, 0);
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_PVGAMCTRL,
desc->pv_gamma, ARRAY_SIZE(desc->pv_gamma));
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_NVGAMCTRL,
desc->nv_gamma, ARRAY_SIZE(desc->nv_gamma));
/*
* Vertical line count configuration:
* Line[6:0]: select number of vertical lines of the TFT matrix in
* multiples of 8 lines
* LDE_EN: enable sub-8-line granularity line count
* Line_delta[1:0]: add 0/2/4/6 extra lines to line count selected
* using Line[6:0]
*
* Total number of vertical lines:
* LN = ((Line[6:0] + 1) * 8) + (LDE_EN ? Line_delta[1:0] * 2 : 0)
*/
ST7701_DSI(st7701, DSI_CMD2_BK0_LNESET,
FIELD_PREP(DSI_CMD2_BK0_LNESET_LINE_MASK, linecount8 - 1) |
(linecountrem2 ? DSI_CMD2_BK0_LNESET_LDE_EN : 0),
FIELD_PREP(DSI_CMD2_BK0_LNESET_LINEDELTA, linecountrem2));
ST7701_DSI(st7701, DSI_CMD2_BK0_PORCTRL,
FIELD_PREP(DSI_CMD2_BK0_PORCTRL_VBP_MASK,
mode->vtotal - mode->vsync_end),
FIELD_PREP(DSI_CMD2_BK0_PORCTRL_VFP_MASK,
mode->vsync_start - mode->vdisplay));
/*
* Horizontal pixel count configuration:
* PCLK = 512 + (RTNI[4:0] * 16)
* The PCLK is number of pixel clock per line, which matches
* mode htotal. The minimum is 512 PCLK.
*/
ST7701_DSI(st7701, DSI_CMD2_BK0_INVSEL,
DSI_CMD2_BK0_INVSEL_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK0_INVSEL_NLINV_MASK, desc->nlinv),
FIELD_PREP(DSI_CMD2_BK0_INVSEL_RTNI_MASK,
(clamp((u32)mode->htotal, 512U, 1008U) - 512) / 16));
/* Command2, BK1 */
st7701_switch_cmd_bkx(st7701, true, 1);
/* Vop = 3.5375V + (VRHA[7:0] * 0.0125V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VRHS,
FIELD_PREP(DSI_CMD2_BK1_VRHA_MASK,
DIV_ROUND_CLOSEST(desc->vop_uv - 3537500, 12500)));
/* Vcom = 0.1V + (VCOM[7:0] * 0.0125V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VCOM,
FIELD_PREP(DSI_CMD2_BK1_VCOM_MASK,
DIV_ROUND_CLOSEST(desc->vcom_uv - 100000, 12500)));
/* Vgh = 11.5V + (VGHSS[7:0] * 0.5V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VGHSS,
FIELD_PREP(DSI_CMD2_BK1_VGHSS_MASK,
DIV_ROUND_CLOSEST(clamp(desc->vgh_mv,
(u16)11500,
(u16)17000) - 11500,
500)));
ST7701_DSI(st7701, DSI_CMD2_BK1_TESTCMD, DSI_CMD2_BK1_TESTCMD_VAL);
/* Vgl is non-linear */
ST7701_DSI(st7701, DSI_CMD2_BK1_VGLS,
DSI_CMD2_BK1_VGLS_ONES |
FIELD_PREP(DSI_CMD2_BK1_VGLS_MASK, st7701_vgls_map(st7701)));
ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR1,
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_AP_MASK,
desc->gamma_op_bias) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_APIS_MASK,
desc->input_op_bias) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_APOS_MASK,
desc->output_op_bias));
/* Avdd = 6.2V + (AVDD[1:0] * 0.2V) , Avcl = -4.4V - (AVCL[1:0] * 0.2V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR2,
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK,
DIV_ROUND_CLOSEST(desc->avdd_mv - 6200, 200)) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK,
DIV_ROUND_CLOSEST(-4400 + desc->avcl_mv, 200)));
/* T2D = 0.2us * T2D[3:0] */
ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1,
DSI_CMD2_BK1_SPD1_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK1_SPD1_T2D_MASK,
DIV_ROUND_CLOSEST(desc->t2d_ns, 200)));
/* T3D = 4us + (0.8us * T3D[3:0]) */
ST7701_DSI(st7701, DSI_CMD2_BK1_SPD2,
DSI_CMD2_BK1_SPD2_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK1_SPD2_T3D_MASK,
DIV_ROUND_CLOSEST(desc->t3d_ns - 4000, 800)));
ST7701_DSI(st7701, DSI_CMD2_BK1_MIPISET1,
DSI_CMD2_BK1_MIPISET1_ONES |
(desc->eot_en ? DSI_CMD2_BK1_MIPISET1_EOT_EN : 0));
}
static void ts8550b_gip_sequence(struct st7701 *st7701)
{
/**
* ST7701_SPEC_V1.2 is unable to provide enough information above this
* specific command sequence, so grab the same from vendor BSP driver.
*/
ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
ST7701_DSI(st7701, 0xE1, 0x0B, 0x00, 0x0D, 0x00, 0x0C, 0x00, 0x0E,
0x00, 0x00, 0x44, 0x44);
ST7701_DSI(st7701, 0xE2, 0x33, 0x33, 0x44, 0x44, 0x64, 0x00, 0x66,
0x00, 0x65, 0x00, 0x67, 0x00, 0x00);
ST7701_DSI(st7701, 0xE3, 0x00, 0x00, 0x33, 0x33);
ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
ST7701_DSI(st7701, 0xE5, 0x0C, 0x78, 0x3C, 0xA0, 0x0E, 0x78, 0x3C,
0xA0, 0x10, 0x78, 0x3C, 0xA0, 0x12, 0x78, 0x3C, 0xA0);
ST7701_DSI(st7701, 0xE6, 0x00, 0x00, 0x33, 0x33);
ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
ST7701_DSI(st7701, 0xE8, 0x0D, 0x78, 0x3C, 0xA0, 0x0F, 0x78, 0x3C,
0xA0, 0x11, 0x78, 0x3C, 0xA0, 0x13, 0x78, 0x3C, 0xA0);
ST7701_DSI(st7701, 0xEB, 0x02, 0x02, 0x39, 0x39, 0xEE, 0x44, 0x00);
ST7701_DSI(st7701, 0xEC, 0x00, 0x00);
ST7701_DSI(st7701, 0xED, 0xFF, 0xF1, 0x04, 0x56, 0x72, 0x3F, 0xFF,
0xFF, 0xFF, 0xFF, 0xF3, 0x27, 0x65, 0x40, 0x1F, 0xFF);
}
static void dmt028vghmcmi_1a_gip_sequence(struct st7701 *st7701)
{
ST7701_DSI(st7701, 0xEE, 0x42);
ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
ST7701_DSI(st7701, 0xE1,
0x04, 0xA0, 0x06, 0xA0,
0x05, 0xA0, 0x07, 0xA0,
0x00, 0x44, 0x44);
ST7701_DSI(st7701, 0xE2,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00);
ST7701_DSI(st7701, 0xE3,
0x00, 0x00, 0x22, 0x22);
ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
ST7701_DSI(st7701, 0xE5,
0x0C, 0x90, 0xA0, 0xA0,
0x0E, 0x92, 0xA0, 0xA0,
0x08, 0x8C, 0xA0, 0xA0,
0x0A, 0x8E, 0xA0, 0xA0);
ST7701_DSI(st7701, 0xE6,
0x00, 0x00, 0x22, 0x22);
ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
ST7701_DSI(st7701, 0xE8,
0x0D, 0x91, 0xA0, 0xA0,
0x0F, 0x93, 0xA0, 0xA0,
0x09, 0x8D, 0xA0, 0xA0,
0x0B, 0x8F, 0xA0, 0xA0);
ST7701_DSI(st7701, 0xEB,
0x00, 0x00, 0xE4, 0xE4,
0x44, 0x00, 0x00);
ST7701_DSI(st7701, 0xED,
0xFF, 0xF5, 0x47, 0x6F,
0x0B, 0xA1, 0xAB, 0xFF,
0xFF, 0xBA, 0x1A, 0xB0,
0xF6, 0x74, 0x5F, 0xFF);
ST7701_DSI(st7701, 0xEF,
0x08, 0x08, 0x08, 0x40,
0x3F, 0x64);
st7701_switch_cmd_bkx(st7701, false, 0);
st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE6, 0x7C);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0E);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0C);
msleep(10);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x3A, 0x70);
}
static int st7701_prepare(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
int ret;
gpiod_set_value(st7701->reset, 0);
ret = regulator_bulk_enable(ARRAY_SIZE(st7701->supplies),
st7701->supplies);
if (ret < 0)
return ret;
msleep(20);
gpiod_set_value(st7701->reset, 1);
msleep(150);
st7701_init_sequence(st7701);
if (st7701->desc->gip_sequence)
st7701->desc->gip_sequence(st7701);
/* Disable Command2 */
st7701_switch_cmd_bkx(st7701, false, 0);
return 0;
}
static int st7701_enable(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_ON, 0x00);
return 0;
}
static int st7701_disable(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_OFF, 0x00);
return 0;
}
static int st7701_unprepare(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_ENTER_SLEEP_MODE, 0x00);
msleep(st7701->sleep_delay);
gpiod_set_value(st7701->reset, 0);
/**
* During the Resetting period, the display will be blanked
* (The display is entering blanking sequence, which maximum
* time is 120 ms, when Reset Starts in Sleep Out mode. The
* display remains the blank state in Sleep In mode.) and
* then return to Default condition for Hardware Reset.
*
* So we need wait sleep_delay time to make sure reset completed.
*/
msleep(st7701->sleep_delay);
regulator_bulk_disable(ARRAY_SIZE(st7701->supplies), st7701->supplies);
return 0;
}
static int st7701_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct st7701 *st7701 = panel_to_st7701(panel);
const struct drm_display_mode *desc_mode = st7701->desc->mode;
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, desc_mode);
if (!mode) {
dev_err(&st7701->dsi->dev, "failed to add mode %ux%u@%u\n",
desc_mode->hdisplay, desc_mode->vdisplay,
drm_mode_vrefresh(desc_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = desc_mode->width_mm;
connector->display_info.height_mm = desc_mode->height_mm;
return 1;
}
static const struct drm_panel_funcs st7701_funcs = {
.disable = st7701_disable,
.unprepare = st7701_unprepare,
.prepare = st7701_prepare,
.enable = st7701_enable,
.get_modes = st7701_get_modes,
};
static const struct drm_display_mode ts8550b_mode = {
.clock = 27500,
.hdisplay = 480,
.hsync_start = 480 + 38,
.hsync_end = 480 + 38 + 12,
.htotal = 480 + 38 + 12 + 12,
.vdisplay = 854,
.vsync_start = 854 + 18,
.vsync_end = 854 + 18 + 8,
.vtotal = 854 + 18 + 8 + 4,
.width_mm = 69,
.height_mm = 139,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct st7701_panel_desc ts8550b_desc = {
.mode = &ts8550b_mode,
.lanes = 2,
.format = MIPI_DSI_FMT_RGB888,
.panel_sleep_delay = 80, /* panel need extra 80ms for sleep out cmd */
.pv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x15),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xf),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x23),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0x12),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x2b),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x34),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0x2) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x15),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xf),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x7),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x9),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x22),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x10),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x2c),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x34),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nlinv = 7,
.vop_uv = 4400000,
.vcom_uv = 337500,
.vgh_mv = 15000,
.vgl_mv = -9510,
.avdd_mv = 6600,
.avcl_mv = -4400,
.gamma_op_bias = OP_BIAS_MAX,
.input_op_bias = OP_BIAS_MIN,
.output_op_bias = OP_BIAS_MIN,
.t2d_ns = 1600,
.t3d_ns = 10400,
.eot_en = true,
.gip_sequence = ts8550b_gip_sequence,
};
static const struct drm_display_mode dmt028vghmcmi_1a_mode = {
.clock = 22325,
.hdisplay = 480,
.hsync_start = 480 + 40,
.hsync_end = 480 + 40 + 4,
.htotal = 480 + 40 + 4 + 20,
.vdisplay = 640,
.vsync_start = 640 + 2,
.vsync_end = 640 + 2 + 40,
.vtotal = 640 + 2 + 40 + 16,
.width_mm = 56,
.height_mm = 78,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct st7701_panel_desc dmt028vghmcmi_1a_desc = {
.mode = &dmt028vghmcmi_1a_mode,
.lanes = 2,
.format = MIPI_DSI_FMT_RGB888,
.panel_sleep_delay = 5, /* panel need extra 5ms for sleep out cmd */
.pv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0x10),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x17),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xd),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x5),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x7),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x1f),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x29),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xd),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x14),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x20),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x5),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x26),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nlinv = 1,
.vop_uv = 4800000,
.vcom_uv = 1650000,
.vgh_mv = 15000,
.vgl_mv = -10170,
.avdd_mv = 6600,
.avcl_mv = -4400,
.gamma_op_bias = OP_BIAS_MIDDLE,
.input_op_bias = OP_BIAS_MIN,
.output_op_bias = OP_BIAS_MIN,
.t2d_ns = 1600,
.t3d_ns = 10400,
.eot_en = true,
.gip_sequence = dmt028vghmcmi_1a_gip_sequence,
};
static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
{
const struct st7701_panel_desc *desc;
struct st7701 *st7701;
int ret;
st7701 = devm_kzalloc(&dsi->dev, sizeof(*st7701), GFP_KERNEL);
if (!st7701)
return -ENOMEM;
desc = of_device_get_match_data(&dsi->dev);
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
dsi->format = desc->format;
dsi->lanes = desc->lanes;
st7701->supplies[0].supply = "VCC";
st7701->supplies[1].supply = "IOVCC";
ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(st7701->supplies),
st7701->supplies);
if (ret < 0)
return ret;
st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(st7701->reset)) {
dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(st7701->reset);
}
drm_panel_init(&st7701->panel, &dsi->dev, &st7701_funcs,
DRM_MODE_CONNECTOR_DSI);
/**
* Once sleep out has been issued, ST7701 IC required to wait 120ms
* before initiating new commands.
*
* On top of that some panels might need an extra delay to wait, so
* add panel specific delay for those cases. As now this panel specific
* delay information is referenced from those panel BSP driver, example
* ts8550b and there is no valid documentation for that.
*/
st7701->sleep_delay = 120 + desc->panel_sleep_delay;
ret = drm_panel_of_backlight(&st7701->panel);
if (ret)
return ret;
drm_panel_add(&st7701->panel);
mipi_dsi_set_drvdata(dsi, st7701);
st7701->dsi = dsi;
st7701->desc = desc;
ret = mipi_dsi_attach(dsi);
if (ret)
goto err_attach;
return 0;
err_attach:
drm_panel_remove(&st7701->panel);
return ret;
}
static void st7701_dsi_remove(struct mipi_dsi_device *dsi)
{
struct st7701 *st7701 = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(dsi);
drm_panel_remove(&st7701->panel);
}
static const struct of_device_id st7701_of_match[] = {
{ .compatible = "densitron,dmt028vghmcmi-1a", .data = &dmt028vghmcmi_1a_desc },
{ .compatible = "techstar,ts8550b", .data = &ts8550b_desc },
{ }
};
MODULE_DEVICE_TABLE(of, st7701_of_match);
static struct mipi_dsi_driver st7701_dsi_driver = {
.probe = st7701_dsi_probe,
.remove = st7701_dsi_remove,
.driver = {
.name = "st7701",
.of_match_table = st7701_of_match,
},
};
module_mipi_dsi_driver(st7701_dsi_driver);
MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
MODULE_DESCRIPTION("Sitronix ST7701 LCD Panel Driver");
MODULE_LICENSE("GPL");