918 lines
22 KiB
C
918 lines
22 KiB
C
|
/*
|
||
|
* STMicroelectronics st_lsm6dsx i2c controller driver
|
||
|
*
|
||
|
* i2c controller embedded in lsm6dx series can connect up to four
|
||
|
* slave devices using accelerometer sensor as trigger for i2c
|
||
|
* read/write operations. Current implementation relies on SLV0 channel
|
||
|
* for slave configuration and SLV{1,2,3} to read data and push them into
|
||
|
* the hw FIFO
|
||
|
*
|
||
|
* Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
|
||
|
*
|
||
|
* Permission to use, copy, modify, and/or distribute this software for any
|
||
|
* purpose with or without fee is hereby granted, provided that the above
|
||
|
* copyright notice and this permission notice appear in all copies.
|
||
|
*
|
||
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||
|
*
|
||
|
*/
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/regmap.h>
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/iio/sysfs.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
|
||
|
#include "st_lsm6dsx.h"
|
||
|
|
||
|
#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3)
|
||
|
#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3)
|
||
|
#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3)
|
||
|
|
||
|
#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0)
|
||
|
|
||
|
static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
|
||
|
/* LIS2MDL */
|
||
|
{
|
||
|
.i2c_addr = { 0x1e },
|
||
|
.wai = {
|
||
|
.addr = 0x4f,
|
||
|
.val = 0x40,
|
||
|
},
|
||
|
.id = ST_LSM6DSX_ID_MAGN,
|
||
|
.odr_table = {
|
||
|
.reg = {
|
||
|
.addr = 0x60,
|
||
|
.mask = GENMASK(3, 2),
|
||
|
},
|
||
|
.odr_avl[0] = { 10000, 0x0 },
|
||
|
.odr_avl[1] = { 20000, 0x1 },
|
||
|
.odr_avl[2] = { 50000, 0x2 },
|
||
|
.odr_avl[3] = { 100000, 0x3 },
|
||
|
.odr_len = 4,
|
||
|
},
|
||
|
.fs_table = {
|
||
|
.fs_avl[0] = {
|
||
|
.gain = 1500,
|
||
|
.val = 0x0,
|
||
|
}, /* 1500 uG/LSB */
|
||
|
.fs_len = 1,
|
||
|
},
|
||
|
.temp_comp = {
|
||
|
.addr = 0x60,
|
||
|
.mask = BIT(7),
|
||
|
},
|
||
|
.pwr_table = {
|
||
|
.reg = {
|
||
|
.addr = 0x60,
|
||
|
.mask = GENMASK(1, 0),
|
||
|
},
|
||
|
.off_val = 0x2,
|
||
|
.on_val = 0x0,
|
||
|
},
|
||
|
.off_canc = {
|
||
|
.addr = 0x61,
|
||
|
.mask = BIT(1),
|
||
|
},
|
||
|
.bdu = {
|
||
|
.addr = 0x62,
|
||
|
.mask = BIT(4),
|
||
|
},
|
||
|
.out = {
|
||
|
.addr = 0x68,
|
||
|
.len = 6,
|
||
|
},
|
||
|
},
|
||
|
/* LIS3MDL */
|
||
|
{
|
||
|
.i2c_addr = { 0x1e },
|
||
|
.wai = {
|
||
|
.addr = 0x0f,
|
||
|
.val = 0x3d,
|
||
|
},
|
||
|
.id = ST_LSM6DSX_ID_MAGN,
|
||
|
.odr_table = {
|
||
|
.reg = {
|
||
|
.addr = 0x20,
|
||
|
.mask = GENMASK(4, 2),
|
||
|
},
|
||
|
.odr_avl[0] = { 1000, 0x0 },
|
||
|
.odr_avl[1] = { 2000, 0x1 },
|
||
|
.odr_avl[2] = { 3000, 0x2 },
|
||
|
.odr_avl[3] = { 5000, 0x3 },
|
||
|
.odr_avl[4] = { 10000, 0x4 },
|
||
|
.odr_avl[5] = { 20000, 0x5 },
|
||
|
.odr_avl[6] = { 40000, 0x6 },
|
||
|
.odr_avl[7] = { 80000, 0x7 },
|
||
|
.odr_len = 8,
|
||
|
},
|
||
|
.fs_table = {
|
||
|
.reg = {
|
||
|
.addr = 0x21,
|
||
|
.mask = GENMASK(6, 5),
|
||
|
},
|
||
|
.fs_avl[0] = {
|
||
|
.gain = 146,
|
||
|
.val = 0x00,
|
||
|
}, /* 4000 uG/LSB */
|
||
|
.fs_avl[1] = {
|
||
|
.gain = 292,
|
||
|
.val = 0x01,
|
||
|
}, /* 8000 uG/LSB */
|
||
|
.fs_avl[2] = {
|
||
|
.gain = 438,
|
||
|
.val = 0x02,
|
||
|
}, /* 12000 uG/LSB */
|
||
|
.fs_avl[3] = {
|
||
|
.gain = 584,
|
||
|
.val = 0x03,
|
||
|
}, /* 16000 uG/LSB */
|
||
|
.fs_len = 4,
|
||
|
},
|
||
|
.pwr_table = {
|
||
|
.reg = {
|
||
|
.addr = 0x22,
|
||
|
.mask = GENMASK(1, 0),
|
||
|
},
|
||
|
.off_val = 0x2,
|
||
|
.on_val = 0x0,
|
||
|
},
|
||
|
.bdu = {
|
||
|
.addr = 0x24,
|
||
|
.mask = BIT(6),
|
||
|
},
|
||
|
.out = {
|
||
|
.addr = 0x28,
|
||
|
.len = 6,
|
||
|
},
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
|
||
|
{
|
||
|
struct st_lsm6dsx_sensor *sensor;
|
||
|
u32 odr, timeout;
|
||
|
|
||
|
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
|
||
|
odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
|
||
|
/* set 10ms as minimum timeout for i2c slave configuration */
|
||
|
timeout = max_t(u32, 2000000U / odr + 1, 10);
|
||
|
msleep(timeout);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* st_lsm6dsx_shub_read_output - read i2c controller register
|
||
|
*
|
||
|
* Read st_lsm6dsx i2c controller register
|
||
|
*/
|
||
|
int st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, int len)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
int err;
|
||
|
|
||
|
mutex_lock(&hw->page_lock);
|
||
|
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
if (hub_settings->shub_out.sec_page) {
|
||
|
err = st_lsm6dsx_set_page(hw, true);
|
||
|
if (err < 0)
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr,
|
||
|
data, len);
|
||
|
|
||
|
if (hub_settings->shub_out.sec_page)
|
||
|
st_lsm6dsx_set_page(hw, false);
|
||
|
out:
|
||
|
mutex_unlock(&hw->page_lock);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* st_lsm6dsx_shub_write_reg - write i2c controller register
|
||
|
*
|
||
|
* Write st_lsm6dsx i2c controller register
|
||
|
*/
|
||
|
static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr,
|
||
|
u8 *data, int len)
|
||
|
{
|
||
|
int err;
|
||
|
|
||
|
mutex_lock(&hw->page_lock);
|
||
|
err = st_lsm6dsx_set_page(hw, true);
|
||
|
if (err < 0)
|
||
|
goto out;
|
||
|
|
||
|
err = regmap_bulk_write(hw->regmap, addr, data, len);
|
||
|
|
||
|
st_lsm6dsx_set_page(hw, false);
|
||
|
out:
|
||
|
mutex_unlock(&hw->page_lock);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr,
|
||
|
u8 mask, u8 val)
|
||
|
{
|
||
|
int err;
|
||
|
|
||
|
mutex_lock(&hw->page_lock);
|
||
|
err = st_lsm6dsx_set_page(hw, true);
|
||
|
if (err < 0)
|
||
|
goto out;
|
||
|
|
||
|
err = regmap_update_bits(hw->regmap, addr, mask, val);
|
||
|
|
||
|
st_lsm6dsx_set_page(hw, false);
|
||
|
out:
|
||
|
mutex_unlock(&hw->page_lock);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
|
||
|
bool enable)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
||
|
unsigned int data;
|
||
|
int err;
|
||
|
|
||
|
/* enable acc sensor as trigger */
|
||
|
err = st_lsm6dsx_sensor_set_enable(sensor, enable);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
mutex_lock(&hw->page_lock);
|
||
|
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
if (hub_settings->master_en.sec_page) {
|
||
|
err = st_lsm6dsx_set_page(hw, true);
|
||
|
if (err < 0)
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
|
||
|
err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
|
||
|
hub_settings->master_en.mask, data);
|
||
|
|
||
|
if (hub_settings->master_en.sec_page)
|
||
|
st_lsm6dsx_set_page(hw, false);
|
||
|
out:
|
||
|
mutex_unlock(&hw->page_lock);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* st_lsm6dsx_shub_read - read data from slave device register
|
||
|
*
|
||
|
* Read data from slave device register. SLV0 is used for
|
||
|
* one-shot read operation
|
||
|
*/
|
||
|
static int
|
||
|
st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
|
||
|
u8 *data, int len)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
u8 config[3], slv_addr, slv_config = 0;
|
||
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
||
|
const struct st_lsm6dsx_reg *aux_sens;
|
||
|
int err;
|
||
|
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
|
||
|
aux_sens = &hw->settings->shub_settings.aux_sens;
|
||
|
/* do not overwrite aux_sens */
|
||
|
if (slv_addr + 2 == aux_sens->addr)
|
||
|
slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
|
||
|
|
||
|
config[0] = (sensor->ext_info.addr << 1) | 1;
|
||
|
config[1] = addr;
|
||
|
config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config;
|
||
|
|
||
|
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_master_enable(sensor, true);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
st_lsm6dsx_shub_wait_complete(hw);
|
||
|
|
||
|
err = st_lsm6dsx_shub_read_output(hw, data,
|
||
|
len & ST_LS6DSX_READ_OP_MASK);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
st_lsm6dsx_shub_master_enable(sensor, false);
|
||
|
|
||
|
config[0] = hub_settings->pause;
|
||
|
config[1] = 0;
|
||
|
config[2] = slv_config;
|
||
|
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* st_lsm6dsx_shub_write - write data to slave device register
|
||
|
*
|
||
|
* Write data from slave device register. SLV0 is used for
|
||
|
* one-shot write operation
|
||
|
*/
|
||
|
static int
|
||
|
st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
|
||
|
u8 *data, int len)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
||
|
u8 config[2], slv_addr;
|
||
|
int err, i;
|
||
|
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
if (hub_settings->wr_once.addr) {
|
||
|
unsigned int data;
|
||
|
|
||
|
data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask);
|
||
|
err = st_lsm6dsx_shub_write_reg_with_mask(hw,
|
||
|
hub_settings->wr_once.addr,
|
||
|
hub_settings->wr_once.mask,
|
||
|
data);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
|
||
|
config[0] = sensor->ext_info.addr << 1;
|
||
|
for (i = 0 ; i < len; i++) {
|
||
|
config[1] = addr + i;
|
||
|
|
||
|
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr,
|
||
|
&data[i], 1);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_master_enable(sensor, true);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
st_lsm6dsx_shub_wait_complete(hw);
|
||
|
|
||
|
st_lsm6dsx_shub_master_enable(sensor, false);
|
||
|
}
|
||
|
|
||
|
config[0] = hub_settings->pause;
|
||
|
config[1] = 0;
|
||
|
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
|
||
|
u8 addr, u8 mask, u8 val)
|
||
|
{
|
||
|
int err;
|
||
|
u8 data;
|
||
|
|
||
|
err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data));
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
data = ((data & ~mask) | (val << __ffs(mask) & mask));
|
||
|
|
||
|
return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
|
||
|
u32 odr, u16 *val)
|
||
|
{
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
int i;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
for (i = 0; i < settings->odr_table.odr_len; i++) {
|
||
|
if (settings->odr_table.odr_avl[i].milli_hz == odr)
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (i == settings->odr_table.odr_len)
|
||
|
return -EINVAL;
|
||
|
|
||
|
*val = settings->odr_table.odr_avl[i].val;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr)
|
||
|
{
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
u16 val;
|
||
|
int err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
return st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->odr_table.reg.addr,
|
||
|
settings->odr_table.reg.mask,
|
||
|
val);
|
||
|
}
|
||
|
|
||
|
/* use SLV{1,2,3} for FIFO read operations */
|
||
|
static int
|
||
|
st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor,
|
||
|
bool enable)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
u8 config[9] = {}, enable_mask, slv_addr;
|
||
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
||
|
struct st_lsm6dsx_sensor *cur_sensor;
|
||
|
int i, j = 0;
|
||
|
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
if (enable)
|
||
|
enable_mask = hw->enable_mask | BIT(sensor->id);
|
||
|
else
|
||
|
enable_mask = hw->enable_mask & ~BIT(sensor->id);
|
||
|
|
||
|
for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) {
|
||
|
if (!hw->iio_devs[i])
|
||
|
continue;
|
||
|
|
||
|
cur_sensor = iio_priv(hw->iio_devs[i]);
|
||
|
if (!(enable_mask & BIT(cur_sensor->id)))
|
||
|
continue;
|
||
|
|
||
|
settings = cur_sensor->ext_info.settings;
|
||
|
config[j] = (sensor->ext_info.addr << 1) | 1;
|
||
|
config[j + 1] = settings->out.addr;
|
||
|
config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) |
|
||
|
hub_settings->batch_en;
|
||
|
j += 3;
|
||
|
}
|
||
|
|
||
|
slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr);
|
||
|
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
}
|
||
|
|
||
|
int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
|
||
|
{
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
int err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_config_channels(sensor, enable);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
if (enable) {
|
||
|
err = st_lsm6dsx_shub_set_odr(sensor,
|
||
|
sensor->ext_info.slv_odr);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
} else {
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->odr_table.reg.addr,
|
||
|
settings->odr_table.reg.mask, 0);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
if (settings->pwr_table.reg.addr) {
|
||
|
u8 val;
|
||
|
|
||
|
val = enable ? settings->pwr_table.on_val
|
||
|
: settings->pwr_table.off_val;
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->pwr_table.reg.addr,
|
||
|
settings->pwr_table.reg.mask, val);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
return st_lsm6dsx_shub_master_enable(sensor, enable);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
|
||
|
struct iio_chan_spec const *ch,
|
||
|
int *val)
|
||
|
{
|
||
|
int err, delay, len;
|
||
|
u8 data[4];
|
||
|
|
||
|
err = st_lsm6dsx_shub_set_enable(sensor, true);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
delay = 1000000000 / sensor->ext_info.slv_odr;
|
||
|
usleep_range(delay, 2 * delay);
|
||
|
|
||
|
len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
|
||
|
err = st_lsm6dsx_shub_read(sensor, ch->address, data, len);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_set_enable(sensor, false);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
switch (len) {
|
||
|
case 2:
|
||
|
*val = (s16)le16_to_cpu(*((__le16 *)data));
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return IIO_VAL_INT;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
|
||
|
struct iio_chan_spec const *ch,
|
||
|
int *val, int *val2, long mask)
|
||
|
{
|
||
|
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
|
||
|
int ret;
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
ret = iio_device_claim_direct_mode(iio_dev);
|
||
|
if (ret)
|
||
|
break;
|
||
|
|
||
|
ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val);
|
||
|
iio_device_release_direct_mode(iio_dev);
|
||
|
break;
|
||
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
||
|
*val = sensor->ext_info.slv_odr / 1000;
|
||
|
*val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
|
||
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
||
|
break;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
*val = 0;
|
||
|
*val2 = sensor->gain;
|
||
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
|
||
|
u32 gain)
|
||
|
{
|
||
|
const struct st_lsm6dsx_fs_table_entry *fs_table;
|
||
|
int i, err;
|
||
|
|
||
|
fs_table = &sensor->ext_info.settings->fs_table;
|
||
|
if (!fs_table->reg.addr)
|
||
|
return -ENOTSUPP;
|
||
|
|
||
|
for (i = 0; i < fs_table->fs_len; i++) {
|
||
|
if (fs_table->fs_avl[i].gain == gain)
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (i == fs_table->fs_len)
|
||
|
return -EINVAL;
|
||
|
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
|
||
|
fs_table->reg.mask,
|
||
|
fs_table->fs_avl[i].val);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
sensor->gain = gain;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int val, int val2, long mask)
|
||
|
{
|
||
|
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
|
||
|
int err;
|
||
|
|
||
|
err = iio_device_claim_direct_mode(iio_dev);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_SAMP_FREQ: {
|
||
|
u16 data;
|
||
|
|
||
|
val = val * 1000 + val2 / 1000;
|
||
|
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
|
||
|
if (!err) {
|
||
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
||
|
struct st_lsm6dsx_sensor *ref_sensor;
|
||
|
u8 odr_val;
|
||
|
int odr;
|
||
|
|
||
|
ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
|
||
|
odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
|
||
|
if (odr < 0) {
|
||
|
err = odr;
|
||
|
goto release;
|
||
|
}
|
||
|
|
||
|
sensor->ext_info.slv_odr = val;
|
||
|
sensor->odr = odr;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
|
||
|
break;
|
||
|
default:
|
||
|
err = -EINVAL;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
release:
|
||
|
iio_device_release_direct_mode(iio_dev);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static ssize_t
|
||
|
st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
|
||
|
struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
int i, len = 0;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
for (i = 0; i < settings->odr_table.odr_len; i++) {
|
||
|
u32 val = settings->odr_table.odr_avl[i].milli_hz;
|
||
|
|
||
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
|
||
|
val / 1000, val % 1000);
|
||
|
}
|
||
|
buf[len - 1] = '\n';
|
||
|
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
|
||
|
struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
int i, len = 0;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
for (i = 0; i < settings->fs_table.fs_len; i++)
|
||
|
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
|
||
|
settings->fs_table.fs_avl[i].gain);
|
||
|
buf[len - 1] = '\n';
|
||
|
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail);
|
||
|
static IIO_DEVICE_ATTR(in_scale_available, 0444,
|
||
|
st_lsm6dsx_shub_scale_avail, NULL, 0);
|
||
|
static struct attribute *st_lsm6dsx_shub_attributes[] = {
|
||
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
||
|
&iio_dev_attr_in_scale_available.dev_attr.attr,
|
||
|
NULL,
|
||
|
};
|
||
|
|
||
|
static const struct attribute_group st_lsm6dsx_shub_attribute_group = {
|
||
|
.attrs = st_lsm6dsx_shub_attributes,
|
||
|
};
|
||
|
|
||
|
static const struct iio_info st_lsm6dsx_shub_info = {
|
||
|
.attrs = &st_lsm6dsx_shub_attribute_group,
|
||
|
.read_raw = st_lsm6dsx_shub_read_raw,
|
||
|
.write_raw = st_lsm6dsx_shub_write_raw,
|
||
|
.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
|
||
|
};
|
||
|
|
||
|
static struct iio_dev *
|
||
|
st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
|
||
|
enum st_lsm6dsx_sensor_id id,
|
||
|
const struct st_lsm6dsx_ext_dev_settings *info,
|
||
|
u8 i2c_addr, const char *name)
|
||
|
{
|
||
|
enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
|
||
|
struct iio_chan_spec *ext_channels;
|
||
|
struct st_lsm6dsx_sensor *sensor;
|
||
|
struct iio_dev *iio_dev;
|
||
|
|
||
|
iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
|
||
|
if (!iio_dev)
|
||
|
return NULL;
|
||
|
|
||
|
iio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
iio_dev->info = &st_lsm6dsx_shub_info;
|
||
|
|
||
|
sensor = iio_priv(iio_dev);
|
||
|
sensor->id = id;
|
||
|
sensor->hw = hw;
|
||
|
sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
|
||
|
sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
|
||
|
sensor->gain = info->fs_table.fs_avl[0].gain;
|
||
|
sensor->ext_info.settings = info;
|
||
|
sensor->ext_info.addr = i2c_addr;
|
||
|
sensor->watermark = 1;
|
||
|
|
||
|
switch (info->id) {
|
||
|
case ST_LSM6DSX_ID_MAGN: {
|
||
|
const struct iio_chan_spec magn_channels[] = {
|
||
|
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr,
|
||
|
IIO_MOD_X, 0),
|
||
|
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2,
|
||
|
IIO_MOD_Y, 1),
|
||
|
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4,
|
||
|
IIO_MOD_Z, 2),
|
||
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
||
|
};
|
||
|
|
||
|
ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels),
|
||
|
GFP_KERNEL);
|
||
|
if (!ext_channels)
|
||
|
return NULL;
|
||
|
|
||
|
memcpy(ext_channels, magn_channels, sizeof(magn_channels));
|
||
|
iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
|
||
|
iio_dev->channels = ext_channels;
|
||
|
iio_dev->num_channels = ARRAY_SIZE(magn_channels);
|
||
|
|
||
|
scnprintf(sensor->name, sizeof(sensor->name), "%s_magn",
|
||
|
name);
|
||
|
break;
|
||
|
}
|
||
|
default:
|
||
|
return NULL;
|
||
|
}
|
||
|
iio_dev->name = sensor->name;
|
||
|
|
||
|
return iio_dev;
|
||
|
}
|
||
|
|
||
|
static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor)
|
||
|
{
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings;
|
||
|
int err;
|
||
|
|
||
|
settings = sensor->ext_info.settings;
|
||
|
if (settings->bdu.addr) {
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->bdu.addr,
|
||
|
settings->bdu.mask, 1);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
if (settings->temp_comp.addr) {
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->temp_comp.addr,
|
||
|
settings->temp_comp.mask, 1);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
if (settings->off_canc.addr) {
|
||
|
err = st_lsm6dsx_shub_write_with_mask(sensor,
|
||
|
settings->off_canc.addr,
|
||
|
settings->off_canc.mask, 1);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
|
||
|
const struct st_lsm6dsx_ext_dev_settings *settings)
|
||
|
{
|
||
|
const struct st_lsm6dsx_shub_settings *hub_settings;
|
||
|
u8 config[3], data, slv_addr, slv_config = 0;
|
||
|
const struct st_lsm6dsx_reg *aux_sens;
|
||
|
struct st_lsm6dsx_sensor *sensor;
|
||
|
bool found = false;
|
||
|
int i, err;
|
||
|
|
||
|
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
|
||
|
hub_settings = &hw->settings->shub_settings;
|
||
|
aux_sens = &hw->settings->shub_settings.aux_sens;
|
||
|
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
|
||
|
/* do not overwrite aux_sens */
|
||
|
if (slv_addr + 2 == aux_sens->addr)
|
||
|
slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
|
||
|
if (!settings->i2c_addr[i])
|
||
|
continue;
|
||
|
|
||
|
/* read wai slave register */
|
||
|
config[0] = (settings->i2c_addr[i] << 1) | 0x1;
|
||
|
config[1] = settings->wai.addr;
|
||
|
config[2] = 0x1 | slv_config;
|
||
|
|
||
|
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
err = st_lsm6dsx_shub_master_enable(sensor, true);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
st_lsm6dsx_shub_wait_complete(hw);
|
||
|
|
||
|
err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
|
||
|
|
||
|
st_lsm6dsx_shub_master_enable(sensor, false);
|
||
|
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
if (data != settings->wai.val)
|
||
|
continue;
|
||
|
|
||
|
*i2c_addr = settings->i2c_addr[i];
|
||
|
found = true;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* reset SLV0 channel */
|
||
|
config[0] = hub_settings->pause;
|
||
|
config[1] = 0;
|
||
|
config[2] = slv_config;
|
||
|
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
|
||
|
sizeof(config));
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
return found ? 0 : -ENODEV;
|
||
|
}
|
||
|
|
||
|
int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
|
||
|
{
|
||
|
enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0;
|
||
|
struct st_lsm6dsx_sensor *sensor;
|
||
|
int err, i, num_ext_dev = 0;
|
||
|
u8 i2c_addr = 0;
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) {
|
||
|
err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr,
|
||
|
&st_lsm6dsx_ext_dev_table[i]);
|
||
|
if (err == -ENODEV)
|
||
|
continue;
|
||
|
else if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id,
|
||
|
&st_lsm6dsx_ext_dev_table[i],
|
||
|
i2c_addr, name);
|
||
|
if (!hw->iio_devs[id])
|
||
|
return -ENOMEM;
|
||
|
|
||
|
sensor = iio_priv(hw->iio_devs[id]);
|
||
|
err = st_lsm6dsx_shub_init_device(sensor);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev)
|
||
|
break;
|
||
|
id++;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|