1378 lines
35 KiB
C
1378 lines
35 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* Amlogic SD/eMMC driver for the GX/S905 family SoCs
|
||
|
*
|
||
|
* Copyright (c) 2016 BayLibre, SAS.
|
||
|
* Author: Kevin Hilman <khilman@baylibre.com>
|
||
|
*/
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/device.h>
|
||
|
#include <linux/iopoll.h>
|
||
|
#include <linux/of_device.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/ioport.h>
|
||
|
#include <linux/dma-mapping.h>
|
||
|
#include <linux/mmc/host.h>
|
||
|
#include <linux/mmc/mmc.h>
|
||
|
#include <linux/mmc/sdio.h>
|
||
|
#include <linux/mmc/slot-gpio.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/clk-provider.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
#include <linux/reset.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
#include <linux/pinctrl/consumer.h>
|
||
|
|
||
|
#define DRIVER_NAME "meson-gx-mmc"
|
||
|
|
||
|
#define SD_EMMC_CLOCK 0x0
|
||
|
#define CLK_DIV_MASK GENMASK(5, 0)
|
||
|
#define CLK_SRC_MASK GENMASK(7, 6)
|
||
|
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
|
||
|
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
|
||
|
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
|
||
|
#define CLK_PHASE_0 0
|
||
|
#define CLK_PHASE_180 2
|
||
|
#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
|
||
|
#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
|
||
|
#define CLK_V2_ALWAYS_ON BIT(24)
|
||
|
#define CLK_V2_IRQ_SDIO_SLEEP BIT(25)
|
||
|
|
||
|
#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
|
||
|
#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
|
||
|
#define CLK_V3_ALWAYS_ON BIT(28)
|
||
|
#define CLK_V3_IRQ_SDIO_SLEEP BIT(29)
|
||
|
|
||
|
#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
|
||
|
#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
|
||
|
#define CLK_ALWAYS_ON(h) (h->data->always_on)
|
||
|
#define CLK_IRQ_SDIO_SLEEP(h) (h->data->irq_sdio_sleep)
|
||
|
|
||
|
#define SD_EMMC_DELAY 0x4
|
||
|
#define SD_EMMC_ADJUST 0x8
|
||
|
#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
|
||
|
#define ADJUST_DS_EN BIT(15)
|
||
|
#define ADJUST_ADJ_EN BIT(13)
|
||
|
|
||
|
#define SD_EMMC_DELAY1 0x4
|
||
|
#define SD_EMMC_DELAY2 0x8
|
||
|
#define SD_EMMC_V3_ADJUST 0xc
|
||
|
|
||
|
#define SD_EMMC_CALOUT 0x10
|
||
|
#define SD_EMMC_START 0x40
|
||
|
#define START_DESC_INIT BIT(0)
|
||
|
#define START_DESC_BUSY BIT(1)
|
||
|
#define START_DESC_ADDR_MASK GENMASK(31, 2)
|
||
|
|
||
|
#define SD_EMMC_CFG 0x44
|
||
|
#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
|
||
|
#define CFG_BUS_WIDTH_1 0x0
|
||
|
#define CFG_BUS_WIDTH_4 0x1
|
||
|
#define CFG_BUS_WIDTH_8 0x2
|
||
|
#define CFG_DDR BIT(2)
|
||
|
#define CFG_BLK_LEN_MASK GENMASK(7, 4)
|
||
|
#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
|
||
|
#define CFG_RC_CC_MASK GENMASK(15, 12)
|
||
|
#define CFG_STOP_CLOCK BIT(22)
|
||
|
#define CFG_CLK_ALWAYS_ON BIT(18)
|
||
|
#define CFG_CHK_DS BIT(20)
|
||
|
#define CFG_AUTO_CLK BIT(23)
|
||
|
#define CFG_ERR_ABORT BIT(27)
|
||
|
|
||
|
#define SD_EMMC_STATUS 0x48
|
||
|
#define STATUS_BUSY BIT(31)
|
||
|
#define STATUS_DESC_BUSY BIT(30)
|
||
|
#define STATUS_DATI GENMASK(23, 16)
|
||
|
|
||
|
#define SD_EMMC_IRQ_EN 0x4c
|
||
|
#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
|
||
|
#define IRQ_TXD_ERR BIT(8)
|
||
|
#define IRQ_DESC_ERR BIT(9)
|
||
|
#define IRQ_RESP_ERR BIT(10)
|
||
|
#define IRQ_CRC_ERR \
|
||
|
(IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
|
||
|
#define IRQ_RESP_TIMEOUT BIT(11)
|
||
|
#define IRQ_DESC_TIMEOUT BIT(12)
|
||
|
#define IRQ_TIMEOUTS \
|
||
|
(IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
|
||
|
#define IRQ_END_OF_CHAIN BIT(13)
|
||
|
#define IRQ_RESP_STATUS BIT(14)
|
||
|
#define IRQ_SDIO BIT(15)
|
||
|
#define IRQ_EN_MASK \
|
||
|
(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
|
||
|
|
||
|
#define SD_EMMC_CMD_CFG 0x50
|
||
|
#define SD_EMMC_CMD_ARG 0x54
|
||
|
#define SD_EMMC_CMD_DAT 0x58
|
||
|
#define SD_EMMC_CMD_RSP 0x5c
|
||
|
#define SD_EMMC_CMD_RSP1 0x60
|
||
|
#define SD_EMMC_CMD_RSP2 0x64
|
||
|
#define SD_EMMC_CMD_RSP3 0x68
|
||
|
|
||
|
#define SD_EMMC_RXD 0x94
|
||
|
#define SD_EMMC_TXD 0x94
|
||
|
#define SD_EMMC_LAST_REG SD_EMMC_TXD
|
||
|
|
||
|
#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
|
||
|
#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
|
||
|
|
||
|
#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
|
||
|
#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
|
||
|
#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
|
||
|
#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
|
||
|
#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
|
||
|
#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
|
||
|
|
||
|
#define SD_EMMC_PRE_REQ_DONE BIT(0)
|
||
|
#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
|
||
|
|
||
|
#define MUX_CLK_NUM_PARENTS 2
|
||
|
|
||
|
struct meson_mmc_data {
|
||
|
unsigned int tx_delay_mask;
|
||
|
unsigned int rx_delay_mask;
|
||
|
unsigned int always_on;
|
||
|
unsigned int adjust;
|
||
|
unsigned int irq_sdio_sleep;
|
||
|
};
|
||
|
|
||
|
struct sd_emmc_desc {
|
||
|
u32 cmd_cfg;
|
||
|
u32 cmd_arg;
|
||
|
u32 cmd_data;
|
||
|
u32 cmd_resp;
|
||
|
};
|
||
|
|
||
|
struct meson_host {
|
||
|
struct device *dev;
|
||
|
const struct meson_mmc_data *data;
|
||
|
struct mmc_host *mmc;
|
||
|
struct mmc_command *cmd;
|
||
|
|
||
|
void __iomem *regs;
|
||
|
struct clk *mux_clk;
|
||
|
struct clk *mmc_clk;
|
||
|
unsigned long req_rate;
|
||
|
bool ddr;
|
||
|
|
||
|
bool dram_access_quirk;
|
||
|
|
||
|
struct pinctrl *pinctrl;
|
||
|
struct pinctrl_state *pins_clk_gate;
|
||
|
|
||
|
unsigned int bounce_buf_size;
|
||
|
void *bounce_buf;
|
||
|
void __iomem *bounce_iomem_buf;
|
||
|
dma_addr_t bounce_dma_addr;
|
||
|
struct sd_emmc_desc *descs;
|
||
|
dma_addr_t descs_dma_addr;
|
||
|
|
||
|
int irq;
|
||
|
|
||
|
bool vqmmc_enabled;
|
||
|
bool needs_pre_post_req;
|
||
|
|
||
|
spinlock_t lock;
|
||
|
};
|
||
|
|
||
|
#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
|
||
|
#define CMD_CFG_BLOCK_MODE BIT(9)
|
||
|
#define CMD_CFG_R1B BIT(10)
|
||
|
#define CMD_CFG_END_OF_CHAIN BIT(11)
|
||
|
#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
|
||
|
#define CMD_CFG_NO_RESP BIT(16)
|
||
|
#define CMD_CFG_NO_CMD BIT(17)
|
||
|
#define CMD_CFG_DATA_IO BIT(18)
|
||
|
#define CMD_CFG_DATA_WR BIT(19)
|
||
|
#define CMD_CFG_RESP_NOCRC BIT(20)
|
||
|
#define CMD_CFG_RESP_128 BIT(21)
|
||
|
#define CMD_CFG_RESP_NUM BIT(22)
|
||
|
#define CMD_CFG_DATA_NUM BIT(23)
|
||
|
#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
|
||
|
#define CMD_CFG_ERROR BIT(30)
|
||
|
#define CMD_CFG_OWNER BIT(31)
|
||
|
|
||
|
#define CMD_DATA_MASK GENMASK(31, 2)
|
||
|
#define CMD_DATA_BIG_ENDIAN BIT(1)
|
||
|
#define CMD_DATA_SRAM BIT(0)
|
||
|
#define CMD_RESP_MASK GENMASK(31, 1)
|
||
|
#define CMD_RESP_SRAM BIT(0)
|
||
|
|
||
|
static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
|
||
|
{
|
||
|
unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
|
||
|
|
||
|
if (!timeout)
|
||
|
return SD_EMMC_CMD_TIMEOUT_DATA;
|
||
|
|
||
|
timeout = roundup_pow_of_two(timeout);
|
||
|
|
||
|
return min(timeout, 32768U); /* max. 2^15 ms */
|
||
|
}
|
||
|
|
||
|
static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
|
||
|
{
|
||
|
if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
|
||
|
return cmd->mrq->cmd;
|
||
|
else if (mmc_op_multi(cmd->opcode) &&
|
||
|
(!cmd->mrq->sbc || cmd->error || cmd->data->error))
|
||
|
return cmd->mrq->stop;
|
||
|
else
|
||
|
return NULL;
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
|
||
|
struct mmc_request *mrq)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
struct mmc_data *data = mrq->data;
|
||
|
struct scatterlist *sg;
|
||
|
int i;
|
||
|
|
||
|
/*
|
||
|
* When Controller DMA cannot directly access DDR memory, disable
|
||
|
* support for Chain Mode to directly use the internal SRAM using
|
||
|
* the bounce buffer mode.
|
||
|
*/
|
||
|
if (host->dram_access_quirk)
|
||
|
return;
|
||
|
|
||
|
/* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
|
||
|
if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
|
||
|
/*
|
||
|
* In block mode DMA descriptor format, "length" field indicates
|
||
|
* number of blocks and there is no way to pass DMA size that
|
||
|
* is not multiple of SDIO block size, making it impossible to
|
||
|
* tie more than one memory buffer with single SDIO block.
|
||
|
* Block mode sg buffer size should be aligned with SDIO block
|
||
|
* size, otherwise chain mode could not be used.
|
||
|
*/
|
||
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
||
|
if (sg->length % data->blksz) {
|
||
|
dev_warn_once(mmc_dev(mmc),
|
||
|
"unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n",
|
||
|
sg->length, data->blksz);
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
||
|
/* check for 8 byte alignment */
|
||
|
if (sg->offset % 8) {
|
||
|
dev_warn_once(mmc_dev(mmc),
|
||
|
"unaligned sg offset %u, disabling descriptor DMA for transfer\n",
|
||
|
sg->offset);
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
|
||
|
}
|
||
|
|
||
|
static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
|
||
|
{
|
||
|
return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
|
||
|
}
|
||
|
|
||
|
static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
|
||
|
{
|
||
|
return data && data->flags & MMC_DATA_READ &&
|
||
|
!meson_mmc_desc_chain_mode(data);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
|
||
|
{
|
||
|
struct mmc_data *data = mrq->data;
|
||
|
|
||
|
if (!data)
|
||
|
return;
|
||
|
|
||
|
meson_mmc_get_transfer_mode(mmc, mrq);
|
||
|
data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
|
||
|
|
||
|
if (!meson_mmc_desc_chain_mode(data))
|
||
|
return;
|
||
|
|
||
|
data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
|
||
|
mmc_get_dma_dir(data));
|
||
|
if (!data->sg_count)
|
||
|
dev_err(mmc_dev(mmc), "dma_map_sg failed");
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
|
||
|
int err)
|
||
|
{
|
||
|
struct mmc_data *data = mrq->data;
|
||
|
|
||
|
if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
|
||
|
dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
|
||
|
mmc_get_dma_dir(data));
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Gating the clock on this controller is tricky. It seems the mmc clock
|
||
|
* is also used by the controller. It may crash during some operation if the
|
||
|
* clock is stopped. The safest thing to do, whenever possible, is to keep
|
||
|
* clock running at stop it at the pad using the pinmux.
|
||
|
*/
|
||
|
static void meson_mmc_clk_gate(struct meson_host *host)
|
||
|
{
|
||
|
u32 cfg;
|
||
|
|
||
|
if (host->pins_clk_gate) {
|
||
|
pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
|
||
|
} else {
|
||
|
/*
|
||
|
* If the pinmux is not provided - default to the classic and
|
||
|
* unsafe method
|
||
|
*/
|
||
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
||
|
cfg |= CFG_STOP_CLOCK;
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_clk_ungate(struct meson_host *host)
|
||
|
{
|
||
|
u32 cfg;
|
||
|
|
||
|
if (host->pins_clk_gate)
|
||
|
pinctrl_select_default_state(host->dev);
|
||
|
|
||
|
/* Make sure the clock is not stopped in the controller */
|
||
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
||
|
cfg &= ~CFG_STOP_CLOCK;
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
|
||
|
bool ddr)
|
||
|
{
|
||
|
struct mmc_host *mmc = host->mmc;
|
||
|
int ret;
|
||
|
u32 cfg;
|
||
|
|
||
|
/* Same request - bail-out */
|
||
|
if (host->ddr == ddr && host->req_rate == rate)
|
||
|
return 0;
|
||
|
|
||
|
/* stop clock */
|
||
|
meson_mmc_clk_gate(host);
|
||
|
host->req_rate = 0;
|
||
|
mmc->actual_clock = 0;
|
||
|
|
||
|
/* return with clock being stopped */
|
||
|
if (!rate)
|
||
|
return 0;
|
||
|
|
||
|
/* Stop the clock during rate change to avoid glitches */
|
||
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
||
|
cfg |= CFG_STOP_CLOCK;
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
|
||
|
if (ddr) {
|
||
|
/* DDR modes require higher module clock */
|
||
|
rate <<= 1;
|
||
|
cfg |= CFG_DDR;
|
||
|
} else {
|
||
|
cfg &= ~CFG_DDR;
|
||
|
}
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
host->ddr = ddr;
|
||
|
|
||
|
ret = clk_set_rate(host->mmc_clk, rate);
|
||
|
if (ret) {
|
||
|
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
|
||
|
rate, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
host->req_rate = rate;
|
||
|
mmc->actual_clock = clk_get_rate(host->mmc_clk);
|
||
|
|
||
|
/* We should report the real output frequency of the controller */
|
||
|
if (ddr) {
|
||
|
host->req_rate >>= 1;
|
||
|
mmc->actual_clock >>= 1;
|
||
|
}
|
||
|
|
||
|
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
|
||
|
if (rate != mmc->actual_clock)
|
||
|
dev_dbg(host->dev, "requested rate was %lu\n", rate);
|
||
|
|
||
|
/* (re)start clock */
|
||
|
meson_mmc_clk_ungate(host);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* The SD/eMMC IP block has an internal mux and divider used for
|
||
|
* generating the MMC clock. Use the clock framework to create and
|
||
|
* manage these clocks.
|
||
|
*/
|
||
|
static int meson_mmc_clk_init(struct meson_host *host)
|
||
|
{
|
||
|
struct clk_init_data init;
|
||
|
struct clk_mux *mux;
|
||
|
struct clk_divider *div;
|
||
|
char clk_name[32];
|
||
|
int i, ret = 0;
|
||
|
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
|
||
|
const char *clk_parent[1];
|
||
|
u32 clk_reg;
|
||
|
|
||
|
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
|
||
|
clk_reg = CLK_ALWAYS_ON(host);
|
||
|
clk_reg |= CLK_DIV_MASK;
|
||
|
clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
|
||
|
clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
|
||
|
clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
|
||
|
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
|
||
|
clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
|
||
|
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
|
||
|
|
||
|
/* get the mux parents */
|
||
|
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
|
||
|
struct clk *clk;
|
||
|
char name[16];
|
||
|
|
||
|
snprintf(name, sizeof(name), "clkin%d", i);
|
||
|
clk = devm_clk_get(host->dev, name);
|
||
|
if (IS_ERR(clk))
|
||
|
return dev_err_probe(host->dev, PTR_ERR(clk),
|
||
|
"Missing clock %s\n", name);
|
||
|
|
||
|
mux_parent_names[i] = __clk_get_name(clk);
|
||
|
}
|
||
|
|
||
|
/* create the mux */
|
||
|
mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
|
||
|
if (!mux)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
|
||
|
init.name = clk_name;
|
||
|
init.ops = &clk_mux_ops;
|
||
|
init.flags = 0;
|
||
|
init.parent_names = mux_parent_names;
|
||
|
init.num_parents = MUX_CLK_NUM_PARENTS;
|
||
|
|
||
|
mux->reg = host->regs + SD_EMMC_CLOCK;
|
||
|
mux->shift = __ffs(CLK_SRC_MASK);
|
||
|
mux->mask = CLK_SRC_MASK >> mux->shift;
|
||
|
mux->hw.init = &init;
|
||
|
|
||
|
host->mux_clk = devm_clk_register(host->dev, &mux->hw);
|
||
|
if (WARN_ON(IS_ERR(host->mux_clk)))
|
||
|
return PTR_ERR(host->mux_clk);
|
||
|
|
||
|
/* create the divider */
|
||
|
div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
|
||
|
if (!div)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
|
||
|
init.name = clk_name;
|
||
|
init.ops = &clk_divider_ops;
|
||
|
init.flags = CLK_SET_RATE_PARENT;
|
||
|
clk_parent[0] = __clk_get_name(host->mux_clk);
|
||
|
init.parent_names = clk_parent;
|
||
|
init.num_parents = 1;
|
||
|
|
||
|
div->reg = host->regs + SD_EMMC_CLOCK;
|
||
|
div->shift = __ffs(CLK_DIV_MASK);
|
||
|
div->width = __builtin_popcountl(CLK_DIV_MASK);
|
||
|
div->hw.init = &init;
|
||
|
div->flags = CLK_DIVIDER_ONE_BASED;
|
||
|
|
||
|
host->mmc_clk = devm_clk_register(host->dev, &div->hw);
|
||
|
if (WARN_ON(IS_ERR(host->mmc_clk)))
|
||
|
return PTR_ERR(host->mmc_clk);
|
||
|
|
||
|
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
|
||
|
host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
|
||
|
ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return clk_prepare_enable(host->mmc_clk);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_disable_resampling(struct meson_host *host)
|
||
|
{
|
||
|
unsigned int val = readl(host->regs + host->data->adjust);
|
||
|
|
||
|
val &= ~ADJUST_ADJ_EN;
|
||
|
writel(val, host->regs + host->data->adjust);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_reset_resampling(struct meson_host *host)
|
||
|
{
|
||
|
unsigned int val;
|
||
|
|
||
|
meson_mmc_disable_resampling(host);
|
||
|
|
||
|
val = readl(host->regs + host->data->adjust);
|
||
|
val &= ~ADJUST_ADJ_DELAY_MASK;
|
||
|
writel(val, host->regs + host->data->adjust);
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
unsigned int val, dly, max_dly, i;
|
||
|
int ret;
|
||
|
|
||
|
/* Resampling is done using the source clock */
|
||
|
max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
|
||
|
clk_get_rate(host->mmc_clk));
|
||
|
|
||
|
val = readl(host->regs + host->data->adjust);
|
||
|
val |= ADJUST_ADJ_EN;
|
||
|
writel(val, host->regs + host->data->adjust);
|
||
|
|
||
|
if (mmc_doing_retune(mmc))
|
||
|
dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
|
||
|
else
|
||
|
dly = 0;
|
||
|
|
||
|
for (i = 0; i < max_dly; i++) {
|
||
|
val &= ~ADJUST_ADJ_DELAY_MASK;
|
||
|
val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
|
||
|
writel(val, host->regs + host->data->adjust);
|
||
|
|
||
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
||
|
if (!ret) {
|
||
|
dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
|
||
|
(dly + i) % max_dly);
|
||
|
return 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
meson_mmc_reset_resampling(host);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_prepare_ios_clock(struct meson_host *host,
|
||
|
struct mmc_ios *ios)
|
||
|
{
|
||
|
bool ddr;
|
||
|
|
||
|
switch (ios->timing) {
|
||
|
case MMC_TIMING_MMC_DDR52:
|
||
|
case MMC_TIMING_UHS_DDR50:
|
||
|
ddr = true;
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
ddr = false;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return meson_mmc_clk_set(host, ios->clock, ddr);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_check_resampling(struct meson_host *host,
|
||
|
struct mmc_ios *ios)
|
||
|
{
|
||
|
switch (ios->timing) {
|
||
|
case MMC_TIMING_LEGACY:
|
||
|
case MMC_TIMING_MMC_HS:
|
||
|
case MMC_TIMING_SD_HS:
|
||
|
case MMC_TIMING_MMC_DDR52:
|
||
|
meson_mmc_disable_resampling(host);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
u32 bus_width, val;
|
||
|
int err;
|
||
|
|
||
|
/*
|
||
|
* GPIO regulator, only controls switching between 1v8 and
|
||
|
* 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
|
||
|
*/
|
||
|
switch (ios->power_mode) {
|
||
|
case MMC_POWER_OFF:
|
||
|
if (!IS_ERR(mmc->supply.vmmc))
|
||
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
||
|
|
||
|
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
|
||
|
regulator_disable(mmc->supply.vqmmc);
|
||
|
host->vqmmc_enabled = false;
|
||
|
}
|
||
|
|
||
|
break;
|
||
|
|
||
|
case MMC_POWER_UP:
|
||
|
if (!IS_ERR(mmc->supply.vmmc))
|
||
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
|
||
|
|
||
|
break;
|
||
|
|
||
|
case MMC_POWER_ON:
|
||
|
if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
|
||
|
int ret = regulator_enable(mmc->supply.vqmmc);
|
||
|
|
||
|
if (ret < 0)
|
||
|
dev_err(host->dev,
|
||
|
"failed to enable vqmmc regulator\n");
|
||
|
else
|
||
|
host->vqmmc_enabled = true;
|
||
|
}
|
||
|
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Bus width */
|
||
|
switch (ios->bus_width) {
|
||
|
case MMC_BUS_WIDTH_1:
|
||
|
bus_width = CFG_BUS_WIDTH_1;
|
||
|
break;
|
||
|
case MMC_BUS_WIDTH_4:
|
||
|
bus_width = CFG_BUS_WIDTH_4;
|
||
|
break;
|
||
|
case MMC_BUS_WIDTH_8:
|
||
|
bus_width = CFG_BUS_WIDTH_8;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
|
||
|
ios->bus_width);
|
||
|
bus_width = CFG_BUS_WIDTH_4;
|
||
|
}
|
||
|
|
||
|
val = readl(host->regs + SD_EMMC_CFG);
|
||
|
val &= ~CFG_BUS_WIDTH_MASK;
|
||
|
val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
|
||
|
writel(val, host->regs + SD_EMMC_CFG);
|
||
|
|
||
|
meson_mmc_check_resampling(host, ios);
|
||
|
err = meson_mmc_prepare_ios_clock(host, ios);
|
||
|
if (err)
|
||
|
dev_err(host->dev, "Failed to set clock: %d\n,", err);
|
||
|
|
||
|
dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_request_done(struct mmc_host *mmc,
|
||
|
struct mmc_request *mrq)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
|
||
|
host->cmd = NULL;
|
||
|
if (host->needs_pre_post_req)
|
||
|
meson_mmc_post_req(mmc, mrq, 0);
|
||
|
mmc_request_done(host->mmc, mrq);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
u32 cfg, blksz_old;
|
||
|
|
||
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
||
|
blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
|
||
|
|
||
|
if (!is_power_of_2(blksz))
|
||
|
dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
|
||
|
|
||
|
blksz = ilog2(blksz);
|
||
|
|
||
|
/* check if block-size matches, if not update */
|
||
|
if (blksz == blksz_old)
|
||
|
return;
|
||
|
|
||
|
dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
|
||
|
blksz_old, blksz);
|
||
|
|
||
|
cfg &= ~CFG_BLK_LEN_MASK;
|
||
|
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
|
||
|
{
|
||
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
||
|
if (cmd->flags & MMC_RSP_136)
|
||
|
*cmd_cfg |= CMD_CFG_RESP_128;
|
||
|
*cmd_cfg |= CMD_CFG_RESP_NUM;
|
||
|
|
||
|
if (!(cmd->flags & MMC_RSP_CRC))
|
||
|
*cmd_cfg |= CMD_CFG_RESP_NOCRC;
|
||
|
|
||
|
if (cmd->flags & MMC_RSP_BUSY)
|
||
|
*cmd_cfg |= CMD_CFG_R1B;
|
||
|
} else {
|
||
|
*cmd_cfg |= CMD_CFG_NO_RESP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
struct sd_emmc_desc *desc = host->descs;
|
||
|
struct mmc_data *data = host->cmd->data;
|
||
|
struct scatterlist *sg;
|
||
|
u32 start;
|
||
|
int i;
|
||
|
|
||
|
if (data->flags & MMC_DATA_WRITE)
|
||
|
cmd_cfg |= CMD_CFG_DATA_WR;
|
||
|
|
||
|
if (data->blocks > 1) {
|
||
|
cmd_cfg |= CMD_CFG_BLOCK_MODE;
|
||
|
meson_mmc_set_blksz(mmc, data->blksz);
|
||
|
}
|
||
|
|
||
|
for_each_sg(data->sg, sg, data->sg_count, i) {
|
||
|
unsigned int len = sg_dma_len(sg);
|
||
|
|
||
|
if (data->blocks > 1)
|
||
|
len /= data->blksz;
|
||
|
|
||
|
desc[i].cmd_cfg = cmd_cfg;
|
||
|
desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
|
||
|
if (i > 0)
|
||
|
desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
|
||
|
desc[i].cmd_arg = host->cmd->arg;
|
||
|
desc[i].cmd_resp = 0;
|
||
|
desc[i].cmd_data = sg_dma_address(sg);
|
||
|
}
|
||
|
desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
|
||
|
|
||
|
dma_wmb(); /* ensure descriptor is written before kicked */
|
||
|
start = host->descs_dma_addr | START_DESC_BUSY;
|
||
|
writel(start, host->regs + SD_EMMC_START);
|
||
|
}
|
||
|
|
||
|
/* local sg copy for dram_access_quirk */
|
||
|
static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
|
||
|
size_t buflen, bool to_buffer)
|
||
|
{
|
||
|
unsigned int sg_flags = SG_MITER_ATOMIC;
|
||
|
struct scatterlist *sgl = data->sg;
|
||
|
unsigned int nents = data->sg_len;
|
||
|
struct sg_mapping_iter miter;
|
||
|
unsigned int offset = 0;
|
||
|
|
||
|
if (to_buffer)
|
||
|
sg_flags |= SG_MITER_FROM_SG;
|
||
|
else
|
||
|
sg_flags |= SG_MITER_TO_SG;
|
||
|
|
||
|
sg_miter_start(&miter, sgl, nents, sg_flags);
|
||
|
|
||
|
while ((offset < buflen) && sg_miter_next(&miter)) {
|
||
|
unsigned int buf_offset = 0;
|
||
|
unsigned int len, left;
|
||
|
u32 *buf = miter.addr;
|
||
|
|
||
|
len = min(miter.length, buflen - offset);
|
||
|
left = len;
|
||
|
|
||
|
if (to_buffer) {
|
||
|
do {
|
||
|
writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
|
||
|
|
||
|
buf_offset += 4;
|
||
|
left -= 4;
|
||
|
} while (left);
|
||
|
} else {
|
||
|
do {
|
||
|
*buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
|
||
|
|
||
|
buf_offset += 4;
|
||
|
left -= 4;
|
||
|
} while (left);
|
||
|
}
|
||
|
|
||
|
offset += len;
|
||
|
}
|
||
|
|
||
|
sg_miter_stop(&miter);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
struct mmc_data *data = cmd->data;
|
||
|
u32 cmd_cfg = 0, cmd_data = 0;
|
||
|
unsigned int xfer_bytes = 0;
|
||
|
|
||
|
/* Setup descriptors */
|
||
|
dma_rmb();
|
||
|
|
||
|
host->cmd = cmd;
|
||
|
|
||
|
cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
|
||
|
cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
|
||
|
cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
|
||
|
|
||
|
meson_mmc_set_response_bits(cmd, &cmd_cfg);
|
||
|
|
||
|
/* data? */
|
||
|
if (data) {
|
||
|
data->bytes_xfered = 0;
|
||
|
cmd_cfg |= CMD_CFG_DATA_IO;
|
||
|
cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
|
||
|
ilog2(meson_mmc_get_timeout_msecs(data)));
|
||
|
|
||
|
if (meson_mmc_desc_chain_mode(data)) {
|
||
|
meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (data->blocks > 1) {
|
||
|
cmd_cfg |= CMD_CFG_BLOCK_MODE;
|
||
|
cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
|
||
|
data->blocks);
|
||
|
meson_mmc_set_blksz(mmc, data->blksz);
|
||
|
} else {
|
||
|
cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
|
||
|
}
|
||
|
|
||
|
xfer_bytes = data->blksz * data->blocks;
|
||
|
if (data->flags & MMC_DATA_WRITE) {
|
||
|
cmd_cfg |= CMD_CFG_DATA_WR;
|
||
|
WARN_ON(xfer_bytes > host->bounce_buf_size);
|
||
|
if (host->dram_access_quirk)
|
||
|
meson_mmc_copy_buffer(host, data, xfer_bytes, true);
|
||
|
else
|
||
|
sg_copy_to_buffer(data->sg, data->sg_len,
|
||
|
host->bounce_buf, xfer_bytes);
|
||
|
dma_wmb();
|
||
|
}
|
||
|
|
||
|
cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
|
||
|
} else {
|
||
|
cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
|
||
|
ilog2(SD_EMMC_CMD_TIMEOUT));
|
||
|
}
|
||
|
|
||
|
/* Last descriptor */
|
||
|
cmd_cfg |= CMD_CFG_END_OF_CHAIN;
|
||
|
writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
|
||
|
writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
|
||
|
writel(0, host->regs + SD_EMMC_CMD_RSP);
|
||
|
wmb(); /* ensure descriptor is written before kicked */
|
||
|
writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
|
||
|
{
|
||
|
struct scatterlist *sg;
|
||
|
int i;
|
||
|
|
||
|
/* Reject request if any element offset or size is not 32bit aligned */
|
||
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
||
|
if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
|
||
|
!IS_ALIGNED(sg->length, sizeof(u32))) {
|
||
|
dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
|
||
|
data->sg->offset, data->sg->length);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
host->needs_pre_post_req = mrq->data &&
|
||
|
!(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
|
||
|
|
||
|
/*
|
||
|
* The memory at the end of the controller used as bounce buffer for
|
||
|
* the dram_access_quirk only accepts 32bit read/write access,
|
||
|
* check the aligment and length of the data before starting the request.
|
||
|
*/
|
||
|
if (host->dram_access_quirk && mrq->data) {
|
||
|
mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
|
||
|
if (mrq->cmd->error) {
|
||
|
mmc_request_done(mmc, mrq);
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (host->needs_pre_post_req) {
|
||
|
meson_mmc_get_transfer_mode(mmc, mrq);
|
||
|
if (!meson_mmc_desc_chain_mode(mrq->data))
|
||
|
host->needs_pre_post_req = false;
|
||
|
}
|
||
|
|
||
|
if (host->needs_pre_post_req)
|
||
|
meson_mmc_pre_req(mmc, mrq);
|
||
|
|
||
|
/* Stop execution */
|
||
|
writel(0, host->regs + SD_EMMC_START);
|
||
|
|
||
|
meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
|
||
|
if (cmd->flags & MMC_RSP_136) {
|
||
|
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
|
||
|
cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
|
||
|
cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
|
||
|
cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
|
||
|
} else if (cmd->flags & MMC_RSP_PRESENT) {
|
||
|
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void __meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
u32 reg_irqen = IRQ_EN_MASK;
|
||
|
|
||
|
if (enable)
|
||
|
reg_irqen |= IRQ_SDIO;
|
||
|
writel(reg_irqen, host->regs + SD_EMMC_IRQ_EN);
|
||
|
}
|
||
|
|
||
|
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
|
||
|
{
|
||
|
struct meson_host *host = dev_id;
|
||
|
struct mmc_command *cmd;
|
||
|
u32 status, raw_status, irq_mask = IRQ_EN_MASK;
|
||
|
irqreturn_t ret = IRQ_NONE;
|
||
|
|
||
|
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
|
||
|
irq_mask |= IRQ_SDIO;
|
||
|
raw_status = readl(host->regs + SD_EMMC_STATUS);
|
||
|
status = raw_status & irq_mask;
|
||
|
|
||
|
if (!status) {
|
||
|
dev_dbg(host->dev,
|
||
|
"Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
|
||
|
irq_mask, raw_status);
|
||
|
return IRQ_NONE;
|
||
|
}
|
||
|
|
||
|
if (WARN_ON(!host))
|
||
|
return IRQ_NONE;
|
||
|
|
||
|
/* ack all raised interrupts */
|
||
|
writel(status, host->regs + SD_EMMC_STATUS);
|
||
|
|
||
|
cmd = host->cmd;
|
||
|
|
||
|
if (status & IRQ_SDIO) {
|
||
|
spin_lock(&host->lock);
|
||
|
__meson_mmc_enable_sdio_irq(host->mmc, 0);
|
||
|
sdio_signal_irq(host->mmc);
|
||
|
spin_unlock(&host->lock);
|
||
|
status &= ~IRQ_SDIO;
|
||
|
if (!status)
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
if (WARN_ON(!cmd))
|
||
|
return IRQ_NONE;
|
||
|
|
||
|
cmd->error = 0;
|
||
|
if (status & IRQ_CRC_ERR) {
|
||
|
dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
|
||
|
cmd->error = -EILSEQ;
|
||
|
ret = IRQ_WAKE_THREAD;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
if (status & IRQ_TIMEOUTS) {
|
||
|
dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
|
||
|
cmd->error = -ETIMEDOUT;
|
||
|
ret = IRQ_WAKE_THREAD;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
meson_mmc_read_resp(host->mmc, cmd);
|
||
|
|
||
|
if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
|
||
|
struct mmc_data *data = cmd->data;
|
||
|
|
||
|
if (data && !cmd->error)
|
||
|
data->bytes_xfered = data->blksz * data->blocks;
|
||
|
if (meson_mmc_bounce_buf_read(data) ||
|
||
|
meson_mmc_get_next_command(cmd))
|
||
|
ret = IRQ_WAKE_THREAD;
|
||
|
else
|
||
|
ret = IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
if (cmd->error) {
|
||
|
/* Stop desc in case of errors */
|
||
|
u32 start = readl(host->regs + SD_EMMC_START);
|
||
|
|
||
|
start &= ~START_DESC_BUSY;
|
||
|
writel(start, host->regs + SD_EMMC_START);
|
||
|
}
|
||
|
|
||
|
if (ret == IRQ_HANDLED)
|
||
|
meson_mmc_request_done(host->mmc, cmd->mrq);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_wait_desc_stop(struct meson_host *host)
|
||
|
{
|
||
|
u32 status;
|
||
|
|
||
|
/*
|
||
|
* It may sometimes take a while for it to actually halt. Here, we
|
||
|
* are giving it 5ms to comply
|
||
|
*
|
||
|
* If we don't confirm the descriptor is stopped, it might raise new
|
||
|
* IRQs after we have called mmc_request_done() which is bad.
|
||
|
*/
|
||
|
|
||
|
return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
|
||
|
!(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
|
||
|
100, 5000);
|
||
|
}
|
||
|
|
||
|
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
|
||
|
{
|
||
|
struct meson_host *host = dev_id;
|
||
|
struct mmc_command *next_cmd, *cmd = host->cmd;
|
||
|
struct mmc_data *data;
|
||
|
unsigned int xfer_bytes;
|
||
|
|
||
|
if (WARN_ON(!cmd))
|
||
|
return IRQ_NONE;
|
||
|
|
||
|
if (cmd->error) {
|
||
|
meson_mmc_wait_desc_stop(host);
|
||
|
meson_mmc_request_done(host->mmc, cmd->mrq);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
data = cmd->data;
|
||
|
if (meson_mmc_bounce_buf_read(data)) {
|
||
|
xfer_bytes = data->blksz * data->blocks;
|
||
|
WARN_ON(xfer_bytes > host->bounce_buf_size);
|
||
|
if (host->dram_access_quirk)
|
||
|
meson_mmc_copy_buffer(host, data, xfer_bytes, false);
|
||
|
else
|
||
|
sg_copy_from_buffer(data->sg, data->sg_len,
|
||
|
host->bounce_buf, xfer_bytes);
|
||
|
}
|
||
|
|
||
|
next_cmd = meson_mmc_get_next_command(cmd);
|
||
|
if (next_cmd)
|
||
|
meson_mmc_start_cmd(host->mmc, next_cmd);
|
||
|
else
|
||
|
meson_mmc_request_done(host->mmc, cmd->mrq);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_cfg_init(struct meson_host *host)
|
||
|
{
|
||
|
u32 cfg = 0;
|
||
|
|
||
|
cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
|
||
|
ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
|
||
|
cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
|
||
|
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
|
||
|
|
||
|
/* abort chain on R/W errors */
|
||
|
cfg |= CFG_ERR_ABORT;
|
||
|
|
||
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_card_busy(struct mmc_host *mmc)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
u32 regval;
|
||
|
|
||
|
regval = readl(host->regs + SD_EMMC_STATUS);
|
||
|
|
||
|
/* We are only interrested in lines 0 to 3, so mask the other ones */
|
||
|
return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
/* vqmmc regulator is available */
|
||
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
||
|
/*
|
||
|
* The usual amlogic setup uses a GPIO to switch from one
|
||
|
* regulator to the other. While the voltage ramp up is
|
||
|
* pretty fast, care must be taken when switching from 3.3v
|
||
|
* to 1.8v. Please make sure the regulator framework is aware
|
||
|
* of your own regulator constraints
|
||
|
*/
|
||
|
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
||
|
return ret < 0 ? ret : 0;
|
||
|
}
|
||
|
|
||
|
/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
|
||
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
||
|
return 0;
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||
|
{
|
||
|
struct meson_host *host = mmc_priv(mmc);
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&host->lock, flags);
|
||
|
__meson_mmc_enable_sdio_irq(mmc, enable);
|
||
|
spin_unlock_irqrestore(&host->lock, flags);
|
||
|
}
|
||
|
|
||
|
static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
|
||
|
{
|
||
|
meson_mmc_enable_sdio_irq(mmc, 1);
|
||
|
}
|
||
|
|
||
|
static const struct mmc_host_ops meson_mmc_ops = {
|
||
|
.request = meson_mmc_request,
|
||
|
.set_ios = meson_mmc_set_ios,
|
||
|
.get_cd = mmc_gpio_get_cd,
|
||
|
.pre_req = meson_mmc_pre_req,
|
||
|
.post_req = meson_mmc_post_req,
|
||
|
.execute_tuning = meson_mmc_resampling_tuning,
|
||
|
.card_busy = meson_mmc_card_busy,
|
||
|
.start_signal_voltage_switch = meson_mmc_voltage_switch,
|
||
|
.enable_sdio_irq = meson_mmc_enable_sdio_irq,
|
||
|
.ack_sdio_irq = meson_mmc_ack_sdio_irq,
|
||
|
};
|
||
|
|
||
|
static int meson_mmc_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct resource *res;
|
||
|
struct meson_host *host;
|
||
|
struct mmc_host *mmc;
|
||
|
struct clk *core_clk;
|
||
|
int cd_irq, ret;
|
||
|
|
||
|
mmc = devm_mmc_alloc_host(&pdev->dev, sizeof(struct meson_host));
|
||
|
if (!mmc)
|
||
|
return -ENOMEM;
|
||
|
host = mmc_priv(mmc);
|
||
|
host->mmc = mmc;
|
||
|
host->dev = &pdev->dev;
|
||
|
dev_set_drvdata(&pdev->dev, host);
|
||
|
|
||
|
/* The G12A SDIO Controller needs an SRAM bounce buffer */
|
||
|
host->dram_access_quirk = device_property_read_bool(&pdev->dev,
|
||
|
"amlogic,dram-access-quirk");
|
||
|
|
||
|
/* Get regulators and the supported OCR mask */
|
||
|
host->vqmmc_enabled = false;
|
||
|
ret = mmc_regulator_get_supply(mmc);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = mmc_of_parse(mmc);
|
||
|
if (ret)
|
||
|
return dev_err_probe(&pdev->dev, ret, "error parsing DT\n");
|
||
|
|
||
|
mmc->caps |= MMC_CAP_CMD23;
|
||
|
|
||
|
if (mmc->caps & MMC_CAP_SDIO_IRQ)
|
||
|
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
|
||
|
|
||
|
host->data = of_device_get_match_data(&pdev->dev);
|
||
|
if (!host->data)
|
||
|
return -EINVAL;
|
||
|
|
||
|
ret = device_reset_optional(&pdev->dev);
|
||
|
if (ret)
|
||
|
return dev_err_probe(&pdev->dev, ret, "device reset failed\n");
|
||
|
|
||
|
host->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
||
|
if (IS_ERR(host->regs))
|
||
|
return PTR_ERR(host->regs);
|
||
|
|
||
|
host->irq = platform_get_irq(pdev, 0);
|
||
|
if (host->irq <= 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
cd_irq = platform_get_irq_optional(pdev, 1);
|
||
|
mmc_gpio_set_cd_irq(mmc, cd_irq);
|
||
|
|
||
|
host->pinctrl = devm_pinctrl_get(&pdev->dev);
|
||
|
if (IS_ERR(host->pinctrl))
|
||
|
return PTR_ERR(host->pinctrl);
|
||
|
|
||
|
host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
|
||
|
"clk-gate");
|
||
|
if (IS_ERR(host->pins_clk_gate)) {
|
||
|
dev_warn(&pdev->dev,
|
||
|
"can't get clk-gate pinctrl, using clk_stop bit\n");
|
||
|
host->pins_clk_gate = NULL;
|
||
|
}
|
||
|
|
||
|
core_clk = devm_clk_get_enabled(&pdev->dev, "core");
|
||
|
if (IS_ERR(core_clk))
|
||
|
return PTR_ERR(core_clk);
|
||
|
|
||
|
ret = meson_mmc_clk_init(host);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* set config to sane default */
|
||
|
meson_mmc_cfg_init(host);
|
||
|
|
||
|
/* Stop execution */
|
||
|
writel(0, host->regs + SD_EMMC_START);
|
||
|
|
||
|
/* clear, ack and enable interrupts */
|
||
|
writel(0, host->regs + SD_EMMC_IRQ_EN);
|
||
|
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
|
||
|
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
|
||
|
|
||
|
ret = request_threaded_irq(host->irq, meson_mmc_irq,
|
||
|
meson_mmc_irq_thread, IRQF_ONESHOT,
|
||
|
dev_name(&pdev->dev), host);
|
||
|
if (ret)
|
||
|
goto err_init_clk;
|
||
|
|
||
|
spin_lock_init(&host->lock);
|
||
|
|
||
|
if (host->dram_access_quirk) {
|
||
|
/* Limit segments to 1 due to low available sram memory */
|
||
|
mmc->max_segs = 1;
|
||
|
/* Limit to the available sram memory */
|
||
|
mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
|
||
|
mmc->max_blk_size;
|
||
|
} else {
|
||
|
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
|
||
|
mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
|
||
|
sizeof(struct sd_emmc_desc);
|
||
|
}
|
||
|
mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
|
||
|
mmc->max_seg_size = mmc->max_req_size;
|
||
|
|
||
|
/*
|
||
|
* At the moment, we don't know how to reliably enable HS400.
|
||
|
* From the different datasheets, it is not even clear if this mode
|
||
|
* is officially supported by any of the SoCs
|
||
|
*/
|
||
|
mmc->caps2 &= ~MMC_CAP2_HS400;
|
||
|
|
||
|
if (host->dram_access_quirk) {
|
||
|
/*
|
||
|
* The MMC Controller embeds 1,5KiB of internal SRAM
|
||
|
* that can be used to be used as bounce buffer.
|
||
|
* In the case of the G12A SDIO controller, use these
|
||
|
* instead of the DDR memory
|
||
|
*/
|
||
|
host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
|
||
|
host->bounce_iomem_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
|
||
|
host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
|
||
|
} else {
|
||
|
/* data bounce buffer */
|
||
|
host->bounce_buf_size = mmc->max_req_size;
|
||
|
host->bounce_buf =
|
||
|
dmam_alloc_coherent(host->dev, host->bounce_buf_size,
|
||
|
&host->bounce_dma_addr, GFP_KERNEL);
|
||
|
if (host->bounce_buf == NULL) {
|
||
|
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
|
||
|
ret = -ENOMEM;
|
||
|
goto err_free_irq;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
host->descs = dmam_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
|
||
|
&host->descs_dma_addr, GFP_KERNEL);
|
||
|
if (!host->descs) {
|
||
|
dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
|
||
|
ret = -ENOMEM;
|
||
|
goto err_free_irq;
|
||
|
}
|
||
|
|
||
|
mmc->ops = &meson_mmc_ops;
|
||
|
ret = mmc_add_host(mmc);
|
||
|
if (ret)
|
||
|
goto err_free_irq;
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
err_free_irq:
|
||
|
free_irq(host->irq, host);
|
||
|
err_init_clk:
|
||
|
clk_disable_unprepare(host->mmc_clk);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int meson_mmc_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct meson_host *host = dev_get_drvdata(&pdev->dev);
|
||
|
|
||
|
mmc_remove_host(host->mmc);
|
||
|
|
||
|
/* disable interrupts */
|
||
|
writel(0, host->regs + SD_EMMC_IRQ_EN);
|
||
|
free_irq(host->irq, host);
|
||
|
|
||
|
clk_disable_unprepare(host->mmc_clk);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct meson_mmc_data meson_gx_data = {
|
||
|
.tx_delay_mask = CLK_V2_TX_DELAY_MASK,
|
||
|
.rx_delay_mask = CLK_V2_RX_DELAY_MASK,
|
||
|
.always_on = CLK_V2_ALWAYS_ON,
|
||
|
.adjust = SD_EMMC_ADJUST,
|
||
|
.irq_sdio_sleep = CLK_V2_IRQ_SDIO_SLEEP,
|
||
|
};
|
||
|
|
||
|
static const struct meson_mmc_data meson_axg_data = {
|
||
|
.tx_delay_mask = CLK_V3_TX_DELAY_MASK,
|
||
|
.rx_delay_mask = CLK_V3_RX_DELAY_MASK,
|
||
|
.always_on = CLK_V3_ALWAYS_ON,
|
||
|
.adjust = SD_EMMC_V3_ADJUST,
|
||
|
.irq_sdio_sleep = CLK_V3_IRQ_SDIO_SLEEP,
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id meson_mmc_of_match[] = {
|
||
|
{ .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
|
||
|
{ .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
|
||
|
{ .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
|
||
|
{ .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
|
||
|
{ .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
|
||
|
|
||
|
static struct platform_driver meson_mmc_driver = {
|
||
|
.probe = meson_mmc_probe,
|
||
|
.remove = meson_mmc_remove,
|
||
|
.driver = {
|
||
|
.name = DRIVER_NAME,
|
||
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
||
|
.of_match_table = meson_mmc_of_match,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(meson_mmc_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
|
||
|
MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
|
||
|
MODULE_LICENSE("GPL v2");
|