linux-zen-server/drivers/net/dsa/realtek/realtek-mdio.c

291 lines
7.2 KiB
C
Raw Permalink Normal View History

2023-08-30 17:53:23 +02:00
// SPDX-License-Identifier: GPL-2.0+
/* Realtek MDIO interface driver
*
* ASICs we intend to support with this driver:
*
* RTL8366 - The original version, apparently
* RTL8369 - Similar enough to have the same datsheet as RTL8366
* RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
* different register layout from the other two
* RTL8366S - Is this "RTL8366 super"?
* RTL8367 - Has an OpenWRT driver as well
* RTL8368S - Seems to be an alternative name for RTL8366RB
* RTL8370 - Also uses SMI
*
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
* Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
* Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
* Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*/
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/overflow.h>
#include <linux/regmap.h>
#include "realtek.h"
/* Read/write via mdiobus */
#define REALTEK_MDIO_CTRL0_REG 31
#define REALTEK_MDIO_START_REG 29
#define REALTEK_MDIO_CTRL1_REG 21
#define REALTEK_MDIO_ADDRESS_REG 23
#define REALTEK_MDIO_DATA_WRITE_REG 24
#define REALTEK_MDIO_DATA_READ_REG 25
#define REALTEK_MDIO_START_OP 0xFFFF
#define REALTEK_MDIO_ADDR_OP 0x000E
#define REALTEK_MDIO_READ_OP 0x0001
#define REALTEK_MDIO_WRITE_OP 0x0003
static int realtek_mdio_write(void *ctx, u32 reg, u32 val)
{
struct realtek_priv *priv = ctx;
struct mii_bus *bus = priv->bus;
int ret;
mutex_lock(&bus->mdio_lock);
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP);
out_unlock:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
{
struct realtek_priv *priv = ctx;
struct mii_bus *bus = priv->bus;
int ret;
mutex_lock(&bus->mdio_lock);
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP);
if (ret)
goto out_unlock;
ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG);
if (ret >= 0) {
*val = ret;
ret = 0;
}
out_unlock:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static void realtek_mdio_lock(void *ctx)
{
struct realtek_priv *priv = ctx;
mutex_lock(&priv->map_lock);
}
static void realtek_mdio_unlock(void *ctx)
{
struct realtek_priv *priv = ctx;
mutex_unlock(&priv->map_lock);
}
static const struct regmap_config realtek_mdio_regmap_config = {
.reg_bits = 10, /* A4..A0 R4..R0 */
.val_bits = 16,
.reg_stride = 1,
/* PHY regs are at 0x8000 */
.max_register = 0xffff,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.reg_read = realtek_mdio_read,
.reg_write = realtek_mdio_write,
.cache_type = REGCACHE_NONE,
.lock = realtek_mdio_lock,
.unlock = realtek_mdio_unlock,
};
static const struct regmap_config realtek_mdio_nolock_regmap_config = {
.reg_bits = 10, /* A4..A0 R4..R0 */
.val_bits = 16,
.reg_stride = 1,
/* PHY regs are at 0x8000 */
.max_register = 0xffff,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.reg_read = realtek_mdio_read,
.reg_write = realtek_mdio_write,
.cache_type = REGCACHE_NONE,
.disable_locking = true,
};
static int realtek_mdio_probe(struct mdio_device *mdiodev)
{
struct realtek_priv *priv;
struct device *dev = &mdiodev->dev;
const struct realtek_variant *var;
struct regmap_config rc;
struct device_node *np;
int ret;
var = of_device_get_match_data(dev);
if (!var)
return -EINVAL;
priv = devm_kzalloc(&mdiodev->dev,
size_add(sizeof(*priv), var->chip_data_sz),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
mutex_init(&priv->map_lock);
rc = realtek_mdio_regmap_config;
rc.lock_arg = priv;
priv->map = devm_regmap_init(dev, NULL, priv, &rc);
if (IS_ERR(priv->map)) {
ret = PTR_ERR(priv->map);
dev_err(dev, "regmap init failed: %d\n", ret);
return ret;
}
rc = realtek_mdio_nolock_regmap_config;
priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
if (IS_ERR(priv->map_nolock)) {
ret = PTR_ERR(priv->map_nolock);
dev_err(dev, "regmap init failed: %d\n", ret);
return ret;
}
priv->mdio_addr = mdiodev->addr;
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;
priv->chip_data = (void *)priv + sizeof(*priv);
priv->clk_delay = var->clk_delay;
priv->cmd_read = var->cmd_read;
priv->cmd_write = var->cmd_write;
priv->ops = var->ops;
priv->write_reg_noack = realtek_mdio_write;
np = dev->of_node;
dev_set_drvdata(dev, priv);
/* TODO: if power is software controlled, set up any regulators here */
priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(priv->reset)) {
dev_err(dev, "failed to get RESET GPIO\n");
return PTR_ERR(priv->reset);
}
if (priv->reset) {
gpiod_set_value(priv->reset, 1);
dev_dbg(dev, "asserted RESET\n");
msleep(REALTEK_HW_STOP_DELAY);
gpiod_set_value(priv->reset, 0);
msleep(REALTEK_HW_START_DELAY);
dev_dbg(dev, "deasserted RESET\n");
}
ret = priv->ops->detect(priv);
if (ret) {
dev_err(dev, "unable to detect switch\n");
return ret;
}
priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
priv->ds->dev = dev;
priv->ds->num_ports = priv->num_ports;
priv->ds->priv = priv;
priv->ds->ops = var->ds_ops_mdio;
ret = dsa_register_switch(priv->ds);
if (ret) {
dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
return ret;
}
return 0;
}
static void realtek_mdio_remove(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
dsa_unregister_switch(priv->ds);
/* leave the device reset asserted */
if (priv->reset)
gpiod_set_value(priv->reset, 1);
}
static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
dsa_switch_shutdown(priv->ds);
dev_set_drvdata(&mdiodev->dev, NULL);
}
static const struct of_device_id realtek_mdio_of_match[] = {
#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
#endif
#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
{ .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
#endif
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
static struct mdio_driver realtek_mdio_driver = {
.mdiodrv.driver = {
.name = "realtek-mdio",
.of_match_table = of_match_ptr(realtek_mdio_of_match),
},
.probe = realtek_mdio_probe,
.remove = realtek_mdio_remove,
.shutdown = realtek_mdio_shutdown,
};
mdio_module_driver(realtek_mdio_driver);
MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
MODULE_LICENSE("GPL");