kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/net/ieee802154/ca8210.c

3194 lines
82 KiB
C
Raw Permalink Normal View History

Initial commit
2023-08-30 17:53:23 +02:00
/*
* http://www.cascoda.com/products/ca-821x/
* Copyright (c) 2016, Cascoda, Ltd.
* All rights reserved.
*
* This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is
* the license notice for both respectively.
*
*******************************************************************************
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*******************************************************************************
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/cdev.h>
#include <linux/clk-provider.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/ieee802154.h>
#include <linux/io.h>
#include <linux/kfifo.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <net/ieee802154_netdev.h>
#include <net/mac802154.h>
#define DRIVER_NAME "ca8210"
/* external clock frequencies */
#define ONE_MHZ 1000000
#define TWO_MHZ (2 * ONE_MHZ)
#define FOUR_MHZ (4 * ONE_MHZ)
#define EIGHT_MHZ (8 * ONE_MHZ)
#define SIXTEEN_MHZ (16 * ONE_MHZ)
/* spi constants */
#define CA8210_SPI_BUF_SIZE 256
#define CA8210_SYNC_TIMEOUT 1000 /* Timeout for synchronous commands [ms] */
/* test interface constants */
#define CA8210_TEST_INT_FILE_NAME "ca8210_test"
#define CA8210_TEST_INT_FIFO_SIZE 256
/* HWME attribute IDs */
#define HWME_EDTHRESHOLD (0x04)
#define HWME_EDVALUE (0x06)
#define HWME_SYSCLKOUT (0x0F)
#define HWME_LQILIMIT (0x11)
/* TDME attribute IDs */
#define TDME_CHANNEL (0x00)
#define TDME_ATM_CONFIG (0x06)
#define MAX_HWME_ATTRIBUTE_SIZE 16
#define MAX_TDME_ATTRIBUTE_SIZE 2
/* PHY/MAC PIB Attribute Enumerations */
#define PHY_CURRENT_CHANNEL (0x00)
#define PHY_TRANSMIT_POWER (0x02)
#define PHY_CCA_MODE (0x03)
#define MAC_ASSOCIATION_PERMIT (0x41)
#define MAC_AUTO_REQUEST (0x42)
#define MAC_BATT_LIFE_EXT (0x43)
#define MAC_BATT_LIFE_EXT_PERIODS (0x44)
#define MAC_BEACON_PAYLOAD (0x45)
#define MAC_BEACON_PAYLOAD_LENGTH (0x46)
#define MAC_BEACON_ORDER (0x47)
#define MAC_GTS_PERMIT (0x4d)
#define MAC_MAX_CSMA_BACKOFFS (0x4e)
#define MAC_MIN_BE (0x4f)
#define MAC_PAN_ID (0x50)
#define MAC_PROMISCUOUS_MODE (0x51)
#define MAC_RX_ON_WHEN_IDLE (0x52)
#define MAC_SHORT_ADDRESS (0x53)
#define MAC_SUPERFRAME_ORDER (0x54)
#define MAC_ASSOCIATED_PAN_COORD (0x56)
#define MAC_MAX_BE (0x57)
#define MAC_MAX_FRAME_RETRIES (0x59)
#define MAC_RESPONSE_WAIT_TIME (0x5A)
#define MAC_SECURITY_ENABLED (0x5D)
#define MAC_AUTO_REQUEST_SECURITY_LEVEL (0x78)
#define MAC_AUTO_REQUEST_KEY_ID_MODE (0x79)
#define NS_IEEE_ADDRESS (0xFF) /* Non-standard IEEE address */
/* MAC Address Mode Definitions */
#define MAC_MODE_NO_ADDR (0x00)
#define MAC_MODE_SHORT_ADDR (0x02)
#define MAC_MODE_LONG_ADDR (0x03)
/* MAC constants */
#define MAX_BEACON_OVERHEAD (75)
#define MAX_BEACON_PAYLOAD_LENGTH (IEEE802154_MTU - MAX_BEACON_OVERHEAD)
#define MAX_ATTRIBUTE_SIZE (122)
#define MAX_DATA_SIZE (114)
#define CA8210_VALID_CHANNELS (0x07FFF800)
/* MAC workarounds for V1.1 and MPW silicon (V0.x) */
#define CA8210_MAC_WORKAROUNDS (0)
#define CA8210_MAC_MPW (0)
/* memory manipulation macros */
#define LS_BYTE(x) ((u8)((x) & 0xFF))
#define MS_BYTE(x) ((u8)(((x) >> 8) & 0xFF))
/* message ID codes in SPI commands */
/* downstream */
#define MCPS_DATA_REQUEST (0x00)
#define MLME_ASSOCIATE_REQUEST (0x02)
#define MLME_ASSOCIATE_RESPONSE (0x03)
#define MLME_DISASSOCIATE_REQUEST (0x04)
#define MLME_GET_REQUEST (0x05)
#define MLME_ORPHAN_RESPONSE (0x06)
#define MLME_RESET_REQUEST (0x07)
#define MLME_RX_ENABLE_REQUEST (0x08)
#define MLME_SCAN_REQUEST (0x09)
#define MLME_SET_REQUEST (0x0A)
#define MLME_START_REQUEST (0x0B)
#define MLME_POLL_REQUEST (0x0D)
#define HWME_SET_REQUEST (0x0E)
#define HWME_GET_REQUEST (0x0F)
#define TDME_SETSFR_REQUEST (0x11)
#define TDME_GETSFR_REQUEST (0x12)
#define TDME_SET_REQUEST (0x14)
/* upstream */
#define MCPS_DATA_INDICATION (0x00)
#define MCPS_DATA_CONFIRM (0x01)
#define MLME_RESET_CONFIRM (0x0A)
#define MLME_SET_CONFIRM (0x0E)
#define MLME_START_CONFIRM (0x0F)
#define HWME_SET_CONFIRM (0x12)
#define HWME_GET_CONFIRM (0x13)
#define HWME_WAKEUP_INDICATION (0x15)
#define TDME_SETSFR_CONFIRM (0x17)
/* SPI command IDs */
/* bit indicating a confirm or indication from slave to master */
#define SPI_S2M (0x20)
/* bit indicating a synchronous message */
#define SPI_SYN (0x40)
/* SPI command definitions */
#define SPI_IDLE (0xFF)
#define SPI_NACK (0xF0)
#define SPI_MCPS_DATA_REQUEST (MCPS_DATA_REQUEST)
#define SPI_MCPS_DATA_INDICATION (MCPS_DATA_INDICATION + SPI_S2M)
#define SPI_MCPS_DATA_CONFIRM (MCPS_DATA_CONFIRM + SPI_S2M)
#define SPI_MLME_ASSOCIATE_REQUEST (MLME_ASSOCIATE_REQUEST)
#define SPI_MLME_RESET_REQUEST (MLME_RESET_REQUEST + SPI_SYN)
#define SPI_MLME_SET_REQUEST (MLME_SET_REQUEST + SPI_SYN)
#define SPI_MLME_START_REQUEST (MLME_START_REQUEST + SPI_SYN)
#define SPI_MLME_RESET_CONFIRM (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN)
#define SPI_MLME_SET_CONFIRM (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN)
#define SPI_MLME_START_CONFIRM (MLME_START_CONFIRM + SPI_S2M + SPI_SYN)
#define SPI_HWME_SET_REQUEST (HWME_SET_REQUEST + SPI_SYN)
#define SPI_HWME_GET_REQUEST (HWME_GET_REQUEST + SPI_SYN)
#define SPI_HWME_SET_CONFIRM (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN)
#define SPI_HWME_GET_CONFIRM (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN)
#define SPI_HWME_WAKEUP_INDICATION (HWME_WAKEUP_INDICATION + SPI_S2M)
#define SPI_TDME_SETSFR_REQUEST (TDME_SETSFR_REQUEST + SPI_SYN)
#define SPI_TDME_SET_REQUEST (TDME_SET_REQUEST + SPI_SYN)
#define SPI_TDME_SETSFR_CONFIRM (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN)
/* TDME SFR addresses */
/* Page 0 */
#define CA8210_SFR_PACFG (0xB1)
#define CA8210_SFR_MACCON (0xD8)
#define CA8210_SFR_PACFGIB (0xFE)
/* Page 1 */
#define CA8210_SFR_LOTXCAL (0xBF)
#define CA8210_SFR_PTHRH (0xD1)
#define CA8210_SFR_PRECFG (0xD3)
#define CA8210_SFR_LNAGX40 (0xE1)
#define CA8210_SFR_LNAGX41 (0xE2)
#define CA8210_SFR_LNAGX42 (0xE3)
#define CA8210_SFR_LNAGX43 (0xE4)
#define CA8210_SFR_LNAGX44 (0xE5)
#define CA8210_SFR_LNAGX45 (0xE6)
#define CA8210_SFR_LNAGX46 (0xE7)
#define CA8210_SFR_LNAGX47 (0xE9)
#define PACFGIB_DEFAULT_CURRENT (0x3F)
#define PTHRH_DEFAULT_THRESHOLD (0x5A)
#define LNAGX40_DEFAULT_GAIN (0x29) /* 10dB */
#define LNAGX41_DEFAULT_GAIN (0x54) /* 21dB */
#define LNAGX42_DEFAULT_GAIN (0x6C) /* 27dB */
#define LNAGX43_DEFAULT_GAIN (0x7A) /* 30dB */
#define LNAGX44_DEFAULT_GAIN (0x84) /* 33dB */
#define LNAGX45_DEFAULT_GAIN (0x8B) /* 34dB */
#define LNAGX46_DEFAULT_GAIN (0x92) /* 36dB */
#define LNAGX47_DEFAULT_GAIN (0x96) /* 37dB */
#define CA8210_IOCTL_HARD_RESET (0x00)
/* Structs/Enums */
/**
* struct cas_control - spi transfer structure
* @msg: spi_message for each exchange
* @transfer: spi_transfer for each exchange
* @tx_buf: source array for transmission
* @tx_in_buf: array storing bytes received during transmission
* @priv: pointer to private data
*
* This structure stores all the necessary data passed around during a single
* spi exchange.
*/
struct cas_control {
struct spi_message msg;
struct spi_transfer transfer;
u8 tx_buf[CA8210_SPI_BUF_SIZE];
u8 tx_in_buf[CA8210_SPI_BUF_SIZE];
struct ca8210_priv *priv;
};
/**
* struct ca8210_test - ca8210 test interface structure
* @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device
* @up_fifo: fifo for upstream messages
* @readq: read wait queue
*
* This structure stores all the data pertaining to the debug interface
*/
struct ca8210_test {
struct dentry *ca8210_dfs_spi_int;
struct kfifo up_fifo;
wait_queue_head_t readq;
};
/**
* struct ca8210_priv - ca8210 private data structure
* @spi: pointer to the ca8210 spi device object
* @hw: pointer to the ca8210 ieee802154_hw object
* @hw_registered: true if hw has been registered with ieee802154
* @lock: spinlock protecting the private data area
* @mlme_workqueue: workqueue for triggering MLME Reset
* @irq_workqueue: workqueue for irq processing
* @tx_skb: current socket buffer to transmit
* @nextmsduhandle: msdu handle to pass to the 15.4 MAC layer for the
* next transmission
* @clk: external clock provided by the ca8210
* @last_dsn: sequence number of last data packet received, for
* resend detection
* @test: test interface data section for this instance
* @async_tx_pending: true if an asynchronous transmission was started and
* is not complete
* @sync_command_response: pointer to buffer to fill with sync response
* @ca8210_is_awake: nonzero if ca8210 is initialised, ready for comms
* @sync_down: counts number of downstream synchronous commands
* @sync_up: counts number of upstream synchronous commands
* @spi_transfer_complete: completion object for a single spi_transfer
* @sync_exchange_complete: completion object for a complete synchronous API
* exchange
* @promiscuous: whether the ca8210 is in promiscuous mode or not
* @retries: records how many times the current pending spi
* transfer has been retried
*/
struct ca8210_priv {
struct spi_device *spi;
struct ieee802154_hw *hw;
bool hw_registered;
spinlock_t lock;
struct workqueue_struct *mlme_workqueue;
struct workqueue_struct *irq_workqueue;
struct sk_buff *tx_skb;
u8 nextmsduhandle;
struct clk *clk;
int last_dsn;
struct ca8210_test test;
bool async_tx_pending;
u8 *sync_command_response;
struct completion ca8210_is_awake;
int sync_down, sync_up;
struct completion spi_transfer_complete, sync_exchange_complete;
bool promiscuous;
int retries;
};
/**
* struct work_priv_container - link between a work object and the relevant
* device's private data
* @work: work object being executed
* @priv: device's private data section
*
*/
struct work_priv_container {
struct work_struct work;
struct ca8210_priv *priv;
};
/**
* struct ca8210_platform_data - ca8210 platform data structure
* @extclockenable: true if the external clock is to be enabled
* @extclockfreq: frequency of the external clock
* @extclockgpio: ca8210 output gpio of the external clock
* @gpio_reset: gpio number of ca8210 reset line
* @gpio_irq: gpio number of ca8210 interrupt line
* @irq_id: identifier for the ca8210 irq
*
*/
struct ca8210_platform_data {
bool extclockenable;
unsigned int extclockfreq;
unsigned int extclockgpio;
int gpio_reset;
int gpio_irq;
int irq_id;
};
/**
* struct fulladdr - full MAC addressing information structure
* @mode: address mode (none, short, extended)
* @pan_id: 16-bit LE pan id
* @address: LE address, variable length as specified by mode
*
*/
struct fulladdr {
u8 mode;
u8 pan_id[2];
u8 address[8];
};
/**
* union macaddr: generic MAC address container
* @short_address: 16-bit short address
* @ieee_address: 64-bit extended address as LE byte array
*
*/
union macaddr {
u16 short_address;
u8 ieee_address[8];
};
/**
* struct secspec: security specification for SAP commands
* @security_level: 0-7, controls level of authentication & encryption
* @key_id_mode: 0-3, specifies how to obtain key
* @key_source: extended key retrieval data
* @key_index: single-byte key identifier
*
*/
struct secspec {
u8 security_level;
u8 key_id_mode;
u8 key_source[8];
u8 key_index;
};
/* downlink functions parameter set definitions */
struct mcps_data_request_pset {
u8 src_addr_mode;
struct fulladdr dst;
u8 msdu_length;
u8 msdu_handle;
u8 tx_options;
u8 msdu[MAX_DATA_SIZE];
};
struct mlme_set_request_pset {
u8 pib_attribute;
u8 pib_attribute_index;
u8 pib_attribute_length;
u8 pib_attribute_value[MAX_ATTRIBUTE_SIZE];
};
struct hwme_set_request_pset {
u8 hw_attribute;
u8 hw_attribute_length;
u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
};
struct hwme_get_request_pset {
u8 hw_attribute;
};
struct tdme_setsfr_request_pset {
u8 sfr_page;
u8 sfr_address;
u8 sfr_value;
};
/* uplink functions parameter set definitions */
struct hwme_set_confirm_pset {
u8 status;
u8 hw_attribute;
};
struct hwme_get_confirm_pset {
u8 status;
u8 hw_attribute;
u8 hw_attribute_length;
u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
};
struct tdme_setsfr_confirm_pset {
u8 status;
u8 sfr_page;
u8 sfr_address;
};
struct mac_message {
u8 command_id;
u8 length;
union {
struct mcps_data_request_pset data_req;
struct mlme_set_request_pset set_req;
struct hwme_set_request_pset hwme_set_req;
struct hwme_get_request_pset hwme_get_req;
struct tdme_setsfr_request_pset tdme_set_sfr_req;
struct hwme_set_confirm_pset hwme_set_cnf;
struct hwme_get_confirm_pset hwme_get_cnf;
struct tdme_setsfr_confirm_pset tdme_set_sfr_cnf;
u8 u8param;
u8 status;
u8 payload[148];
} pdata;
};
union pa_cfg_sfr {
struct {
u8 bias_current_trim : 3;
u8 /* reserved */ : 1;
u8 buffer_capacitor_trim : 3;
u8 boost : 1;
};
u8 paib;
};
struct preamble_cfg_sfr {
u8 timeout_symbols : 3;
u8 acquisition_symbols : 3;
u8 search_symbols : 2;
};
static int (*cascoda_api_upstream)(
const u8 *buf,
size_t len,
void *device_ref
);
/**
* link_to_linux_err() - Translates an 802.15.4 return code into the closest
* linux error
* @link_status: 802.15.4 status code
*
* Return: 0 or Linux error code
*/
static int link_to_linux_err(int link_status)
{
if (link_status < 0) {
/* status is already a Linux code */
return link_status;
}
switch (link_status) {
case IEEE802154_SUCCESS:
case IEEE802154_REALIGNMENT:
return 0;
case IEEE802154_IMPROPER_KEY_TYPE:
return -EKEYREJECTED;
case IEEE802154_IMPROPER_SECURITY_LEVEL:
case IEEE802154_UNSUPPORTED_LEGACY:
case IEEE802154_DENIED:
return -EACCES;
case IEEE802154_BEACON_LOST:
case IEEE802154_NO_ACK:
case IEEE802154_NO_BEACON:
return -ENETUNREACH;
case IEEE802154_CHANNEL_ACCESS_FAILURE:
case IEEE802154_TX_ACTIVE:
case IEEE802154_SCAN_IN_PROGRESS:
return -EBUSY;
case IEEE802154_DISABLE_TRX_FAILURE:
case IEEE802154_OUT_OF_CAP:
return -EAGAIN;
case IEEE802154_FRAME_TOO_LONG:
return -EMSGSIZE;
case IEEE802154_INVALID_GTS:
case IEEE802154_PAST_TIME:
return -EBADSLT;
case IEEE802154_INVALID_HANDLE:
return -EBADMSG;
case IEEE802154_INVALID_PARAMETER:
case IEEE802154_UNSUPPORTED_ATTRIBUTE:
case IEEE802154_ON_TIME_TOO_LONG:
case IEEE802154_INVALID_INDEX:
return -EINVAL;
case IEEE802154_NO_DATA:
return -ENODATA;
case IEEE802154_NO_SHORT_ADDRESS:
return -EFAULT;
case IEEE802154_PAN_ID_CONFLICT:
return -EADDRINUSE;
case IEEE802154_TRANSACTION_EXPIRED:
return -ETIME;
case IEEE802154_TRANSACTION_OVERFLOW:
return -ENOBUFS;
case IEEE802154_UNAVAILABLE_KEY:
return -ENOKEY;
case IEEE802154_INVALID_ADDRESS:
return -ENXIO;
case IEEE802154_TRACKING_OFF:
case IEEE802154_SUPERFRAME_OVERLAP:
return -EREMOTEIO;
case IEEE802154_LIMIT_REACHED:
return -EDQUOT;
case IEEE802154_READ_ONLY:
return -EROFS;
default:
return -EPROTO;
}
}
/**
* ca8210_test_int_driver_write() - Writes a message to the test interface to be
* read by the userspace
* @buf: Buffer containing upstream message
* @len: length of message to write
* @spi: SPI device of message originator
*
* Return: 0 or linux error code
*/
static int ca8210_test_int_driver_write(
const u8 *buf,
size_t len,
void *spi
)
{
struct ca8210_priv *priv = spi_get_drvdata(spi);
struct ca8210_test *test = &priv->test;
char *fifo_buffer;
int i;
dev_dbg(
&priv->spi->dev,
"test_interface: Buffering upstream message:\n"
);
for (i = 0; i < len; i++)
dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]);
fifo_buffer = kmemdup(buf, len, GFP_KERNEL);
if (!fifo_buffer)
return -ENOMEM;
kfifo_in(&test->up_fifo, &fifo_buffer, 4);
wake_up_interruptible(&priv->test.readq);
return 0;
}
/* SPI Operation */
static int ca8210_net_rx(
struct ieee802154_hw *hw,
u8 *command,
size_t len
);
static u8 mlme_reset_request_sync(
u8 set_default_pib,
void *device_ref
);
static int ca8210_spi_transfer(
struct spi_device *spi,
const u8 *buf,
size_t len
);
/**
* ca8210_reset_send() - Hard resets the ca8210 for a given time
* @spi: Pointer to target ca8210 spi device
* @ms: Milliseconds to hold the reset line low for
*/
static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
{
struct ca8210_platform_data *pdata = spi->dev.platform_data;
struct ca8210_priv *priv = spi_get_drvdata(spi);
long status;
gpio_set_value(pdata->gpio_reset, 0);
reinit_completion(&priv->ca8210_is_awake);
msleep(ms);
gpio_set_value(pdata->gpio_reset, 1);
priv->promiscuous = false;
/* Wait until wakeup indication seen */
status = wait_for_completion_interruptible_timeout(
&priv->ca8210_is_awake,
msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
);
if (status == 0) {
dev_crit(
&spi->dev,
"Fatal: No wakeup from ca8210 after reset!\n"
);
}
dev_dbg(&spi->dev, "Reset the device\n");
}
/**
* ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW
* condition happens.
* @work: Pointer to work being executed
*/
static void ca8210_mlme_reset_worker(struct work_struct *work)
{
struct work_priv_container *wpc = container_of(
work,
struct work_priv_container,
work
);
struct ca8210_priv *priv = wpc->priv;
mlme_reset_request_sync(0, priv->spi);
kfree(wpc);
}
/**
* ca8210_rx_done() - Calls various message dispatches responding to a received
* command
* @cas_ctl: Pointer to the cas_control object for the relevant spi transfer
*
* Presents a received SAP command from the ca8210 to the Cascoda EVBME, test
* interface and network driver.
*/
static void ca8210_rx_done(struct cas_control *cas_ctl)
{
u8 *buf;
unsigned int len;
struct work_priv_container *mlme_reset_wpc;
struct ca8210_priv *priv = cas_ctl->priv;
buf = cas_ctl->tx_in_buf;
len = buf[1] + 2;
if (len > CA8210_SPI_BUF_SIZE) {
dev_crit(
&priv->spi->dev,
"Received packet len (%u) erroneously long\n",
len
);
goto finish;
}
if (buf[0] & SPI_SYN) {
if (priv->sync_command_response) {
memcpy(priv->sync_command_response, buf, len);
complete(&priv->sync_exchange_complete);
} else {
if (cascoda_api_upstream)
cascoda_api_upstream(buf, len, priv->spi);
priv->sync_up++;
}
} else {
if (cascoda_api_upstream)
cascoda_api_upstream(buf, len, priv->spi);
}
ca8210_net_rx(priv->hw, buf, len);
if (buf[0] == SPI_MCPS_DATA_CONFIRM) {
if (buf[3] == IEEE802154_TRANSACTION_OVERFLOW) {
dev_info(
&priv->spi->dev,
"Waiting for transaction overflow to stabilise...\n");
msleep(2000);
dev_info(
&priv->spi->dev,
"Resetting MAC...\n");
mlme_reset_wpc = kmalloc(sizeof(*mlme_reset_wpc),
GFP_KERNEL);
if (!mlme_reset_wpc)
goto finish;
INIT_WORK(
&mlme_reset_wpc->work,
ca8210_mlme_reset_worker
);
mlme_reset_wpc->priv = priv;
queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work);
}
} else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) {
dev_notice(
&priv->spi->dev,
"Wakeup indication received, reason:\n"
);
switch (buf[2]) {
case 0:
dev_notice(
&priv->spi->dev,
"Transceiver woken up from Power Up / System Reset\n"
);
break;
case 1:
dev_notice(
&priv->spi->dev,
"Watchdog Timer Time-Out\n"
);
break;
case 2:
dev_notice(
&priv->spi->dev,
"Transceiver woken up from Power-Off by Sleep Timer Time-Out\n");
break;
case 3:
dev_notice(
&priv->spi->dev,
"Transceiver woken up from Power-Off by GPIO Activity\n"
);
break;
case 4:
dev_notice(
&priv->spi->dev,
"Transceiver woken up from Standby by Sleep Timer Time-Out\n"
);
break;
case 5:
dev_notice(
&priv->spi->dev,
"Transceiver woken up from Standby by GPIO Activity\n"
);
break;
case 6:
dev_notice(
&priv->spi->dev,
"Sleep-Timer Time-Out in Active Mode\n"
);
break;
default:
dev_warn(&priv->spi->dev, "Wakeup reason unknown\n");
break;
}
complete(&priv->ca8210_is_awake);
}
finish:;
}
static void ca8210_remove(struct spi_device *spi_device);
/**
* ca8210_spi_transfer_complete() - Called when a single spi transfer has
* completed
* @context: Pointer to the cas_control object for the finished transfer
*/
static void ca8210_spi_transfer_complete(void *context)
{
struct cas_control *cas_ctl = context;
struct ca8210_priv *priv = cas_ctl->priv;
bool duplex_rx = false;
int i;
u8 retry_buffer[CA8210_SPI_BUF_SIZE];
if (
cas_ctl->tx_in_buf[0] == SPI_NACK ||
(cas_ctl->tx_in_buf[0] == SPI_IDLE &&
cas_ctl->tx_in_buf[1] == SPI_NACK)
) {
/* ca8210 is busy */
dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n");
if (cas_ctl->tx_buf[0] == SPI_IDLE) {
dev_warn(
&priv->spi->dev,
"IRQ servicing NACKd, dropping transfer\n"
);
kfree(cas_ctl);
return;
}
if (priv->retries > 3) {
dev_err(&priv->spi->dev, "too many retries!\n");
kfree(cas_ctl);
ca8210_remove(priv->spi);
return;
}
memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE);
kfree(cas_ctl);
ca8210_spi_transfer(
priv->spi,
retry_buffer,
CA8210_SPI_BUF_SIZE
);
priv->retries++;
dev_info(&priv->spi->dev, "retried spi write\n");
return;
} else if (
cas_ctl->tx_in_buf[0] != SPI_IDLE &&
cas_ctl->tx_in_buf[0] != SPI_NACK
) {
duplex_rx = true;
}
if (duplex_rx) {
dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n");
for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++)
dev_dbg(
&priv->spi->dev,
"%#03x\n",
cas_ctl->tx_in_buf[i]
);
ca8210_rx_done(cas_ctl);
}
complete(&priv->spi_transfer_complete);
kfree(cas_ctl);
priv->retries = 0;
}
/**
* ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210
* @spi: Pointer to spi device for transfer
* @buf: Octet array to send
* @len: length of the buffer being sent
*
* Return: 0 or linux error code
*/
static int ca8210_spi_transfer(
struct spi_device *spi,
const u8 *buf,
size_t len
)
{
int i, status = 0;
struct ca8210_priv *priv;
struct cas_control *cas_ctl;
if (!spi) {
pr_crit("NULL spi device passed to %s\n", __func__);
return -ENODEV;
}
priv = spi_get_drvdata(spi);
reinit_completion(&priv->spi_transfer_complete);
dev_dbg(&spi->dev, "%s called\n", __func__);
cas_ctl = kzalloc(sizeof(*cas_ctl), GFP_ATOMIC);
if (!cas_ctl)
return -ENOMEM;
cas_ctl->priv = priv;
memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
memcpy(cas_ctl->tx_buf, buf, len);
for (i = 0; i < len; i++)
dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]);
spi_message_init(&cas_ctl->msg);
cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */
cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */
cas_ctl->transfer.speed_hz = 0; /* Use device setting */
cas_ctl->transfer.bits_per_word = 0; /* Use device setting */
cas_ctl->transfer.tx_buf = cas_ctl->tx_buf;
cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf;
cas_ctl->transfer.delay.value = 0;
cas_ctl->transfer.delay.unit = SPI_DELAY_UNIT_USECS;
cas_ctl->transfer.cs_change = 0;
cas_ctl->transfer.len = sizeof(struct mac_message);
cas_ctl->msg.complete = ca8210_spi_transfer_complete;
cas_ctl->msg.context = cas_ctl;
spi_message_add_tail(
&cas_ctl->transfer,
&cas_ctl->msg
);
status = spi_async(spi, &cas_ctl->msg);
if (status < 0) {
dev_crit(
&spi->dev,
"status %d from spi_sync in write\n",
status
);
}
return status;
}
/**
* ca8210_spi_exchange() - Exchange API/SAP commands with the radio
* @buf: Octet array of command being sent downstream
* @len: length of buf
* @response: buffer for storing synchronous response
* @device_ref: spi_device pointer for ca8210
*
* Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for
* synchronous commands waits for the corresponding response to be read from
* the spi before returning. The response is written to the response parameter.
*
* Return: 0 or linux error code
*/
static int ca8210_spi_exchange(
const u8 *buf,
size_t len,
u8 *response,
void *device_ref
)
{
int status = 0;
struct spi_device *spi = device_ref;
struct ca8210_priv *priv = spi->dev.driver_data;
long wait_remaining;
if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */
reinit_completion(&priv->sync_exchange_complete);
priv->sync_command_response = response;
}
do {
reinit_completion(&priv->spi_transfer_complete);
status = ca8210_spi_transfer(priv->spi, buf, len);
if (status) {
dev_warn(
&spi->dev,
"spi write failed, returned %d\n",
status
);
if (status == -EBUSY)
continue;
if (((buf[0] & SPI_SYN) && response))
complete(&priv->sync_exchange_complete);
goto cleanup;
}
wait_remaining = wait_for_completion_interruptible_timeout(
&priv->spi_transfer_complete,
msecs_to_jiffies(1000)
);
if (wait_remaining == -ERESTARTSYS) {
status = -ERESTARTSYS;
} else if (wait_remaining == 0) {
dev_err(
&spi->dev,
"SPI downstream transfer timed out!\n"
);
status = -ETIME;
goto cleanup;
}
} while (status < 0);
if (!((buf[0] & SPI_SYN) && response))
goto cleanup;
wait_remaining = wait_for_completion_interruptible_timeout(
&priv->sync_exchange_complete,
msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
);
if (wait_remaining == -ERESTARTSYS) {
status = -ERESTARTSYS;
} else if (wait_remaining == 0) {
dev_err(
&spi->dev,
"Synchronous confirm timeout\n"
);
status = -ETIME;
}
cleanup:
priv->sync_command_response = NULL;
return status;
}
/**
* ca8210_interrupt_handler() - Called when an irq is received from the ca8210
* @irq: Id of the irq being handled
* @dev_id: Pointer passed by the system, pointing to the ca8210's private data
*
* This function is called when the irq line from the ca8210 is asserted,
* signifying that the ca8210 has a message to send upstream to us. Starts the
* asynchronous spi read.
*
* Return: irq return code
*/
static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id)
{
struct ca8210_priv *priv = dev_id;
int status;
dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n");
do {
status = ca8210_spi_transfer(priv->spi, NULL, 0);
if (status && (status != -EBUSY)) {
dev_warn(
&priv->spi->dev,
"spi read failed, returned %d\n",
status
);
}
} while (status == -EBUSY);
return IRQ_HANDLED;
}
static int (*cascoda_api_downstream)(
const u8 *buf,
size_t len,
u8 *response,
void *device_ref
) = ca8210_spi_exchange;
/* Cascoda API / 15.4 SAP Primitives */
/**
* tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API
* @sfr_page: SFR Page
* @sfr_address: SFR Address
* @sfr_value: SFR Value
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of TDME-SETSFR.confirm
*/
static u8 tdme_setsfr_request_sync(
u8 sfr_page,
u8 sfr_address,
u8 sfr_value,
void *device_ref
)
{
int ret;
struct mac_message command, response;
struct spi_device *spi = device_ref;
command.command_id = SPI_TDME_SETSFR_REQUEST;
command.length = 3;
command.pdata.tdme_set_sfr_req.sfr_page = sfr_page;
command.pdata.tdme_set_sfr_req.sfr_address = sfr_address;
command.pdata.tdme_set_sfr_req.sfr_value = sfr_value;
response.command_id = SPI_IDLE;
ret = cascoda_api_downstream(
&command.command_id,
command.length + 2,
&response.command_id,
device_ref
);
if (ret) {
dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret);
return IEEE802154_SYSTEM_ERROR;
}
if (response.command_id != SPI_TDME_SETSFR_CONFIRM) {
dev_crit(
&spi->dev,
"sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n",
response.command_id
);
return IEEE802154_SYSTEM_ERROR;
}
return response.pdata.tdme_set_sfr_cnf.status;
}
/**
* tdme_chipinit() - TDME Chip Register Default Initialisation Macro
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of API calls
*/
static u8 tdme_chipinit(void *device_ref)
{
u8 status = IEEE802154_SUCCESS;
u8 sfr_address;
struct spi_device *spi = device_ref;
struct preamble_cfg_sfr pre_cfg_value = {
.timeout_symbols = 3,
.acquisition_symbols = 3,
.search_symbols = 1,
};
/* LNA Gain Settings */
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX40),
LNAGX40_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX41),
LNAGX41_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX42),
LNAGX42_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX43),
LNAGX43_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX44),
LNAGX44_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX45),
LNAGX45_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX46),
LNAGX46_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_LNAGX47),
LNAGX47_DEFAULT_GAIN, device_ref);
if (status)
goto finish;
/* Preamble Timing Config */
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_PRECFG),
*((u8 *)&pre_cfg_value), device_ref);
if (status)
goto finish;
/* Preamble Threshold High */
status = tdme_setsfr_request_sync(
1, (sfr_address = CA8210_SFR_PTHRH),
PTHRH_DEFAULT_THRESHOLD, device_ref);
if (status)
goto finish;
/* Tx Output Power 8 dBm */
status = tdme_setsfr_request_sync(
0, (sfr_address = CA8210_SFR_PACFGIB),
PACFGIB_DEFAULT_CURRENT, device_ref);
if (status)
goto finish;
finish:
if (status != IEEE802154_SUCCESS) {
dev_err(
&spi->dev,
"failed to set sfr at %#03x, status = %#03x\n",
sfr_address,
status
);
}
return status;
}
/**
* tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx)
* @channel: 802.15.4 channel to initialise chip for
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of API calls
*/
static u8 tdme_channelinit(u8 channel, void *device_ref)
{
/* Transceiver front-end local oscillator tx two-point calibration
* value. Tuned for the hardware.
*/
u8 txcalval;
if (channel >= 25)
txcalval = 0xA7;
else if (channel >= 23)
txcalval = 0xA8;
else if (channel >= 22)
txcalval = 0xA9;
else if (channel >= 20)
txcalval = 0xAA;
else if (channel >= 17)
txcalval = 0xAB;
else if (channel >= 16)
txcalval = 0xAC;
else if (channel >= 14)
txcalval = 0xAD;
else if (channel >= 12)
txcalval = 0xAE;
else
txcalval = 0xAF;
return tdme_setsfr_request_sync(
1,
CA8210_SFR_LOTXCAL,
txcalval,
device_ref
); /* LO Tx Cal */
}
/**
* tdme_checkpibattribute() - Checks Attribute Values that are not checked in
* MAC
* @pib_attribute: Attribute Number
* @pib_attribute_length: Attribute length
* @pib_attribute_value: Pointer to Attribute Value
*
* Return: 802.15.4 status code of checks
*/
static u8 tdme_checkpibattribute(
u8 pib_attribute,
u8 pib_attribute_length,
const void *pib_attribute_value
)
{
u8 status = IEEE802154_SUCCESS;
u8 value;
value = *((u8 *)pib_attribute_value);
switch (pib_attribute) {
/* PHY */
case PHY_TRANSMIT_POWER:
if (value > 0x3F)
status = IEEE802154_INVALID_PARAMETER;
break;
case PHY_CCA_MODE:
if (value > 0x03)
status = IEEE802154_INVALID_PARAMETER;
break;
/* MAC */
case MAC_BATT_LIFE_EXT_PERIODS:
if (value < 6 || value > 41)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_BEACON_PAYLOAD:
if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_BEACON_PAYLOAD_LENGTH:
if (value > MAX_BEACON_PAYLOAD_LENGTH)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_BEACON_ORDER:
if (value > 15)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_MAX_BE:
if (value < 3 || value > 8)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_MAX_CSMA_BACKOFFS:
if (value > 5)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_MAX_FRAME_RETRIES:
if (value > 7)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_MIN_BE:
if (value > 8)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_RESPONSE_WAIT_TIME:
if (value < 2 || value > 64)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_SUPERFRAME_ORDER:
if (value > 15)
status = IEEE802154_INVALID_PARAMETER;
break;
/* boolean */
case MAC_ASSOCIATED_PAN_COORD:
case MAC_ASSOCIATION_PERMIT:
case MAC_AUTO_REQUEST:
case MAC_BATT_LIFE_EXT:
case MAC_GTS_PERMIT:
case MAC_PROMISCUOUS_MODE:
case MAC_RX_ON_WHEN_IDLE:
case MAC_SECURITY_ENABLED:
if (value > 1)
status = IEEE802154_INVALID_PARAMETER;
break;
/* MAC SEC */
case MAC_AUTO_REQUEST_SECURITY_LEVEL:
if (value > 7)
status = IEEE802154_INVALID_PARAMETER;
break;
case MAC_AUTO_REQUEST_KEY_ID_MODE:
if (value > 3)
status = IEEE802154_INVALID_PARAMETER;
break;
default:
break;
}
return status;
}
/**
* tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower
* @txp: Transmit Power
* @device_ref: Nondescript pointer to target device
*
* Normalised to 802.15.4 Definition (6-bit, signed):
* Bit 7-6: not used
* Bit 5-0: tx power (-32 - +31 dB)
*
* Return: 802.15.4 status code of api calls
*/
static u8 tdme_settxpower(u8 txp, void *device_ref)
{
u8 status;
s8 txp_val;
u8 txp_ext;
union pa_cfg_sfr pa_cfg_val;
/* extend from 6 to 8 bit */
txp_ext = 0x3F & txp;
if (txp_ext & 0x20)
txp_ext += 0xC0;
txp_val = (s8)txp_ext;
if (CA8210_MAC_MPW) {
if (txp_val > 0) {
/* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */
pa_cfg_val.bias_current_trim = 3;
pa_cfg_val.buffer_capacitor_trim = 5;
pa_cfg_val.boost = 1;
} else {
/* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */
pa_cfg_val.bias_current_trim = 3;
pa_cfg_val.buffer_capacitor_trim = 7;
pa_cfg_val.boost = 0;
}
/* write PACFG */
status = tdme_setsfr_request_sync(
0,
CA8210_SFR_PACFG,
pa_cfg_val.paib,
device_ref
);
} else {
/* Look-Up Table for Setting Current and Frequency Trim values
* for desired Output Power
*/
if (txp_val > 8) {
pa_cfg_val.paib = 0x3F;
} else if (txp_val == 8) {
pa_cfg_val.paib = 0x32;
} else if (txp_val == 7) {
pa_cfg_val.paib = 0x22;
} else if (txp_val == 6) {
pa_cfg_val.paib = 0x18;
} else if (txp_val == 5) {
pa_cfg_val.paib = 0x10;
} else if (txp_val == 4) {
pa_cfg_val.paib = 0x0C;
} else if (txp_val == 3) {
pa_cfg_val.paib = 0x08;
} else if (txp_val == 2) {
pa_cfg_val.paib = 0x05;
} else if (txp_val == 1) {
pa_cfg_val.paib = 0x03;
} else if (txp_val == 0) {
pa_cfg_val.paib = 0x01;
} else { /* < 0 */
pa_cfg_val.paib = 0x00;
}
/* write PACFGIB */
status = tdme_setsfr_request_sync(
0,
CA8210_SFR_PACFGIB,
pa_cfg_val.paib,
device_ref
);
}
return status;
}
/**
* mcps_data_request() - mcps_data_request (Send Data) according to API Spec
* @src_addr_mode: Source Addressing Mode
* @dst_address_mode: Destination Addressing Mode
* @dst_pan_id: Destination PAN ID
* @dst_addr: Pointer to Destination Address
* @msdu_length: length of Data
* @msdu: Pointer to Data
* @msdu_handle: Handle of Data
* @tx_options: Tx Options Bit Field
* @security: Pointer to Security Structure or NULL
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of action
*/
static u8 mcps_data_request(
u8 src_addr_mode,
u8 dst_address_mode,
u16 dst_pan_id,
union macaddr *dst_addr,
u8 msdu_length,
u8 *msdu,
u8 msdu_handle,
u8 tx_options,
struct secspec *security,
void *device_ref
)
{
struct secspec *psec;
struct mac_message command;
command.command_id = SPI_MCPS_DATA_REQUEST;
command.pdata.data_req.src_addr_mode = src_addr_mode;
command.pdata.data_req.dst.mode = dst_address_mode;
if (dst_address_mode != MAC_MODE_NO_ADDR) {
command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id);
command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id);
if (dst_address_mode == MAC_MODE_SHORT_ADDR) {
command.pdata.data_req.dst.address[0] = LS_BYTE(
dst_addr->short_address
);
command.pdata.data_req.dst.address[1] = MS_BYTE(
dst_addr->short_address
);
} else { /* MAC_MODE_LONG_ADDR*/
memcpy(
command.pdata.data_req.dst.address,
dst_addr->ieee_address,
8
);
}
}
command.pdata.data_req.msdu_length = msdu_length;
command.pdata.data_req.msdu_handle = msdu_handle;
command.pdata.data_req.tx_options = tx_options;
memcpy(command.pdata.data_req.msdu, msdu, msdu_length);
psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length);
command.length = sizeof(struct mcps_data_request_pset) -
MAX_DATA_SIZE + msdu_length;
if (!security || security->security_level == 0) {
psec->security_level = 0;
command.length += 1;
} else {
*psec = *security;
command.length += sizeof(struct secspec);
}
if (ca8210_spi_transfer(device_ref, &command.command_id,
command.length + 2))
return IEEE802154_SYSTEM_ERROR;
return IEEE802154_SUCCESS;
}
/**
* mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec
* @set_default_pib: Set defaults in PIB
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of MLME-RESET.confirm
*/
static u8 mlme_reset_request_sync(
u8 set_default_pib,
void *device_ref
)
{
u8 status;
struct mac_message command, response;
struct spi_device *spi = device_ref;
command.command_id = SPI_MLME_RESET_REQUEST;
command.length = 1;
command.pdata.u8param = set_default_pib;
if (cascoda_api_downstream(
&command.command_id,
command.length + 2,
&response.command_id,
device_ref)) {
dev_err(&spi->dev, "cascoda_api_downstream failed\n");
return IEEE802154_SYSTEM_ERROR;
}
if (response.command_id != SPI_MLME_RESET_CONFIRM)
return IEEE802154_SYSTEM_ERROR;
status = response.pdata.status;
/* reset COORD Bit for Channel Filtering as Coordinator */
if (CA8210_MAC_WORKAROUNDS && set_default_pib && !status) {
status = tdme_setsfr_request_sync(
0,
CA8210_SFR_MACCON,
0,
device_ref
);
}
return status;
}
/**
* mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec
* @pib_attribute: Attribute Number
* @pib_attribute_index: Index within Attribute if an Array
* @pib_attribute_length: Attribute length
* @pib_attribute_value: Pointer to Attribute Value
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of MLME-SET.confirm
*/
static u8 mlme_set_request_sync(
u8 pib_attribute,
u8 pib_attribute_index,
u8 pib_attribute_length,
const void *pib_attribute_value,
void *device_ref
)
{
u8 status;
struct mac_message command, response;
/* pre-check the validity of pib_attribute values that are not checked
* in MAC
*/
if (tdme_checkpibattribute(
pib_attribute, pib_attribute_length, pib_attribute_value)) {
return IEEE802154_INVALID_PARAMETER;
}
if (pib_attribute == PHY_CURRENT_CHANNEL) {
status = tdme_channelinit(
*((u8 *)pib_attribute_value),
device_ref
);
if (status)
return status;
}
if (pib_attribute == PHY_TRANSMIT_POWER) {
return tdme_settxpower(
*((u8 *)pib_attribute_value),
device_ref
);
}
command.command_id = SPI_MLME_SET_REQUEST;
command.length = sizeof(struct mlme_set_request_pset) -
MAX_ATTRIBUTE_SIZE + pib_attribute_length;
command.pdata.set_req.pib_attribute = pib_attribute;
command.pdata.set_req.pib_attribute_index = pib_attribute_index;
command.pdata.set_req.pib_attribute_length = pib_attribute_length;
memcpy(
command.pdata.set_req.pib_attribute_value,
pib_attribute_value,
pib_attribute_length
);
if (cascoda_api_downstream(
&command.command_id,
command.length + 2,
&response.command_id,
device_ref)) {
return IEEE802154_SYSTEM_ERROR;
}
if (response.command_id != SPI_MLME_SET_CONFIRM)
return IEEE802154_SYSTEM_ERROR;
return response.pdata.status;
}
/**
* hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec
* @hw_attribute: Attribute Number
* @hw_attribute_length: Attribute length
* @hw_attribute_value: Pointer to Attribute Value
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of HWME-SET.confirm
*/
static u8 hwme_set_request_sync(
u8 hw_attribute,
u8 hw_attribute_length,
u8 *hw_attribute_value,
void *device_ref
)
{
struct mac_message command, response;
command.command_id = SPI_HWME_SET_REQUEST;
command.length = 2 + hw_attribute_length;
command.pdata.hwme_set_req.hw_attribute = hw_attribute;
command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length;
memcpy(
command.pdata.hwme_set_req.hw_attribute_value,
hw_attribute_value,
hw_attribute_length
);
if (cascoda_api_downstream(
&command.command_id,
command.length + 2,
&response.command_id,
device_ref)) {
return IEEE802154_SYSTEM_ERROR;
}
if (response.command_id != SPI_HWME_SET_CONFIRM)
return IEEE802154_SYSTEM_ERROR;
return response.pdata.hwme_set_cnf.status;
}
/**
* hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec
* @hw_attribute: Attribute Number
* @hw_attribute_length: Attribute length
* @hw_attribute_value: Pointer to Attribute Value
* @device_ref: Nondescript pointer to target device
*
* Return: 802.15.4 status code of HWME-GET.confirm
*/
static u8 hwme_get_request_sync(
u8 hw_attribute,
u8 *hw_attribute_length,
u8 *hw_attribute_value,
void *device_ref
)
{
struct mac_message command, response;
command.command_id = SPI_HWME_GET_REQUEST;
command.length = 1;
command.pdata.hwme_get_req.hw_attribute = hw_attribute;
if (cascoda_api_downstream(
&command.command_id,
command.length + 2,
&response.command_id,
device_ref)) {
return IEEE802154_SYSTEM_ERROR;
}
if (response.command_id != SPI_HWME_GET_CONFIRM)
return IEEE802154_SYSTEM_ERROR;
if (response.pdata.hwme_get_cnf.status == IEEE802154_SUCCESS) {
*hw_attribute_length =
response.pdata.hwme_get_cnf.hw_attribute_length;
memcpy(
hw_attribute_value,
response.pdata.hwme_get_cnf.hw_attribute_value,
*hw_attribute_length
);
}
return response.pdata.hwme_get_cnf.status;
}
/* Network driver operation */
/**
* ca8210_async_xmit_complete() - Called to announce that an asynchronous
* transmission has finished
* @hw: ieee802154_hw of ca8210 that has finished exchange
* @msduhandle: Identifier of transmission that has completed
* @status: Returned 802.15.4 status code of the transmission
*
* Return: 0 or linux error code
*/
static int ca8210_async_xmit_complete(
struct ieee802154_hw *hw,
u8 msduhandle,
u8 status)
{
struct ca8210_priv *priv = hw->priv;
if (priv->nextmsduhandle != msduhandle) {
dev_err(
&priv->spi->dev,
"Unexpected msdu_handle on data confirm, Expected %d, got %d\n",
priv->nextmsduhandle,
msduhandle
);
return -EIO;
}
priv->async_tx_pending = false;
priv->nextmsduhandle++;
if (status) {
dev_err(
&priv->spi->dev,
"Link transmission unsuccessful, status = %d\n",
status
);
if (status != IEEE802154_TRANSACTION_OVERFLOW) {
ieee802154_xmit_error(priv->hw, priv->tx_skb, status);
return 0;
}
}
ieee802154_xmit_complete(priv->hw, priv->tx_skb, true);
return 0;
}
/**
* ca8210_skb_rx() - Contructs a properly framed socket buffer from a received
* MCPS_DATA_indication
* @hw: ieee802154_hw that MCPS_DATA_indication was received by
* @len: length of MCPS_DATA_indication
* @data_ind: Octet array of MCPS_DATA_indication
*
* Called by the spi driver whenever a SAP command is received, this function
* will ascertain whether the command is of interest to the network driver and
* take necessary action.
*
* Return: 0 or linux error code
*/
static int ca8210_skb_rx(
struct ieee802154_hw *hw,
size_t len,
u8 *data_ind
)
{
struct ieee802154_hdr hdr;
int msdulen;
int hlen;
u8 mpdulinkquality = data_ind[23];
struct sk_buff *skb;
struct ca8210_priv *priv = hw->priv;
/* Allocate mtu size buffer for every rx packet */
skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr));
if (!skb)
return -ENOMEM;
skb_reserve(skb, sizeof(hdr));
msdulen = data_ind[22]; /* msdu_length */
if (msdulen > IEEE802154_MTU) {
dev_err(
&priv->spi->dev,
"received erroneously large msdu length!\n"
);
kfree_skb(skb);
return -EMSGSIZE;
}
dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen);
if (priv->promiscuous)
goto copy_payload;
/* Populate hdr */
hdr.sec.level = data_ind[29 + msdulen];
dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level);
if (hdr.sec.level > 0) {
hdr.sec.key_id_mode = data_ind[30 + msdulen];
memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8);
hdr.sec.key_id = data_ind[39 + msdulen];
}
hdr.source.mode = data_ind[0];
dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode);
hdr.source.pan_id = *(u16 *)&data_ind[1];
dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id);
memcpy(&hdr.source.extended_addr, &data_ind[3], 8);
hdr.dest.mode = data_ind[11];
dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode);
hdr.dest.pan_id = *(u16 *)&data_ind[12];
dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id);
memcpy(&hdr.dest.extended_addr, &data_ind[14], 8);
/* Fill in FC implicitly */
hdr.fc.type = 1; /* Data frame */
if (hdr.sec.level)
hdr.fc.security_enabled = 1;
else
hdr.fc.security_enabled = 0;
if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13])
hdr.fc.intra_pan = 1;
else
hdr.fc.intra_pan = 0;
hdr.fc.dest_addr_mode = hdr.dest.mode;
hdr.fc.source_addr_mode = hdr.source.mode;
/* Add hdr to front of buffer */
hlen = ieee802154_hdr_push(skb, &hdr);
if (hlen < 0) {
dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n");
kfree_skb(skb);
return hlen;
}
skb_reset_mac_header(skb);
skb->mac_len = hlen;
copy_payload:
/* Add <msdulen> bytes of space to the back of the buffer */
/* Copy msdu to skb */
skb_put_data(skb, &data_ind[29], msdulen);
ieee802154_rx_irqsafe(hw, skb, mpdulinkquality);
return 0;
}
/**
* ca8210_net_rx() - Acts upon received SAP commands relevant to the network
* driver
* @hw: ieee802154_hw that command was received by
* @command: Octet array of received command
* @len: length of the received command
*
* Called by the spi driver whenever a SAP command is received, this function
* will ascertain whether the command is of interest to the network driver and
* take necessary action.
*
* Return: 0 or linux error code
*/
static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len)
{
struct ca8210_priv *priv = hw->priv;
unsigned long flags;
u8 status;
dev_dbg(&priv->spi->dev, "%s: CmdID = %d\n", __func__, command[0]);
if (command[0] == SPI_MCPS_DATA_INDICATION) {
/* Received data */
spin_lock_irqsave(&priv->lock, flags);
if (command[26] == priv->last_dsn) {
dev_dbg(
&priv->spi->dev,
"DSN %d resend received, ignoring...\n",
command[26]
);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
priv->last_dsn = command[26];
spin_unlock_irqrestore(&priv->lock, flags);
return ca8210_skb_rx(hw, len - 2, command + 2);
} else if (command[0] == SPI_MCPS_DATA_CONFIRM) {
status = command[3];
if (priv->async_tx_pending) {
return ca8210_async_xmit_complete(
hw,
command[2],
status
);
}
}
return 0;
}
/**
* ca8210_skb_tx() - Transmits a given socket buffer using the ca8210
* @skb: Socket buffer to transmit
* @msduhandle: Data identifier to pass to the 802.15.4 MAC
* @priv: Pointer to private data section of target ca8210
*
* Return: 0 or linux error code
*/
static int ca8210_skb_tx(
struct sk_buff *skb,
u8 msduhandle,
struct ca8210_priv *priv
)
{
struct ieee802154_hdr header = { };
struct secspec secspec;
int mac_len, status;
dev_dbg(&priv->spi->dev, "%s called\n", __func__);
/* Get addressing info from skb - ieee802154 layer creates a full
* packet
*/
mac_len = ieee802154_hdr_peek_addrs(skb, &header);
if (mac_len < 0)
return mac_len;
secspec.security_level = header.sec.level;
secspec.key_id_mode = header.sec.key_id_mode;
if (secspec.key_id_mode == 2)
memcpy(secspec.key_source, &header.sec.short_src, 4);
else if (secspec.key_id_mode == 3)
memcpy(secspec.key_source, &header.sec.extended_src, 8);
secspec.key_index = header.sec.key_id;
/* Pass to Cascoda API */
status = mcps_data_request(
header.source.mode,
header.dest.mode,
header.dest.pan_id,
(union macaddr *)&header.dest.extended_addr,
skb->len - mac_len,
&skb->data[mac_len],
msduhandle,
header.fc.ack_request,
&secspec,
priv->spi
);
return link_to_linux_err(status);
}
/**
* ca8210_start() - Starts the network driver
* @hw: ieee802154_hw of ca8210 being started
*
* Return: 0 or linux error code
*/
static int ca8210_start(struct ieee802154_hw *hw)
{
int status;
u8 rx_on_when_idle;
u8 lqi_threshold = 0;
struct ca8210_priv *priv = hw->priv;
priv->last_dsn = -1;
/* Turn receiver on when idle for now just to test rx */
rx_on_when_idle = 1;
status = mlme_set_request_sync(
MAC_RX_ON_WHEN_IDLE,
0,
1,
&rx_on_when_idle,
priv->spi
);
if (status) {
dev_crit(
&priv->spi->dev,
"Setting rx_on_when_idle failed, status = %d\n",
status
);
return link_to_linux_err(status);
}
status = hwme_set_request_sync(
HWME_LQILIMIT,
1,
&lqi_threshold,
priv->spi
);
if (status) {
dev_crit(
&priv->spi->dev,
"Setting lqilimit failed, status = %d\n",
status
);
return link_to_linux_err(status);
}
return 0;
}
/**
* ca8210_stop() - Stops the network driver
* @hw: ieee802154_hw of ca8210 being stopped
*
* Return: 0 or linux error code
*/
static void ca8210_stop(struct ieee802154_hw *hw)
{
}
/**
* ca8210_xmit_async() - Asynchronously transmits a given socket buffer using
* the ca8210
* @hw: ieee802154_hw of ca8210 to transmit from
* @skb: Socket buffer to transmit
*
* Return: 0 or linux error code
*/
static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb)
{
struct ca8210_priv *priv = hw->priv;
int status;
dev_dbg(&priv->spi->dev, "calling %s\n", __func__);
priv->tx_skb = skb;
priv->async_tx_pending = true;
status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv);
return status;
}
/**
* ca8210_get_ed() - Returns the measured energy on the current channel at this
* instant in time
* @hw: ieee802154_hw of target ca8210
* @level: Measured Energy Detect level
*
* Return: 0 or linux error code
*/
static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level)
{
u8 lenvar;
struct ca8210_priv *priv = hw->priv;
return link_to_linux_err(
hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi)
);
}
/**
* ca8210_set_channel() - Sets the current operating 802.15.4 channel of the
* ca8210
* @hw: ieee802154_hw of target ca8210
* @page: Channel page to set
* @channel: Channel number to set
*
* Return: 0 or linux error code
*/
static int ca8210_set_channel(
struct ieee802154_hw *hw,
u8 page,
u8 channel
)
{
u8 status;
struct ca8210_priv *priv = hw->priv;
status = mlme_set_request_sync(
PHY_CURRENT_CHANNEL,
0,
1,
&channel,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting channel, MLME-SET.confirm status = %d\n",
status
);
}
return link_to_linux_err(status);
}
/**
* ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the
* ca8210
* @hw: ieee802154_hw of target ca8210
* @filt: Filtering parameters
* @changed: Bitmap representing which parameters to change
*
* Effectively just sets the actual addressing information identifying this node
* as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4
* 2006 specification.
*
* Return: 0 or linux error code
*/
static int ca8210_set_hw_addr_filt(
struct ieee802154_hw *hw,
struct ieee802154_hw_addr_filt *filt,
unsigned long changed
)
{
u8 status = 0;
struct ca8210_priv *priv = hw->priv;
if (changed & IEEE802154_AFILT_PANID_CHANGED) {
status = mlme_set_request_sync(
MAC_PAN_ID,
0,
2,
&filt->pan_id, priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting pan id, MLME-SET.confirm status = %d",
status
);
return link_to_linux_err(status);
}
}
if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
status = mlme_set_request_sync(
MAC_SHORT_ADDRESS,
0,
2,
&filt->short_addr, priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting short address, MLME-SET.confirm status = %d",
status
);
return link_to_linux_err(status);
}
}
if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
status = mlme_set_request_sync(
NS_IEEE_ADDRESS,
0,
8,
&filt->ieee_addr,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting ieee address, MLME-SET.confirm status = %d",
status
);
return link_to_linux_err(status);
}
}
/* TODO: Should use MLME_START to set coord bit? */
return 0;
}
/**
* ca8210_set_tx_power() - Sets the transmit power of the ca8210
* @hw: ieee802154_hw of target ca8210
* @mbm: Transmit power in mBm (dBm*100)
*
* Return: 0 or linux error code
*/
static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm)
{
struct ca8210_priv *priv = hw->priv;
mbm /= 100;
return link_to_linux_err(
mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi)
);
}
/**
* ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210
* @hw: ieee802154_hw of target ca8210
* @cca: CCA mode to set
*
* Return: 0 or linux error code
*/
static int ca8210_set_cca_mode(
struct ieee802154_hw *hw,
const struct wpan_phy_cca *cca
)
{
u8 status;
u8 cca_mode;
struct ca8210_priv *priv = hw->priv;
cca_mode = cca->mode & 3;
if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) {
/* cca_mode 0 == CS OR ED, 3 == CS AND ED */
cca_mode = 0;
}
status = mlme_set_request_sync(
PHY_CCA_MODE,
0,
1,
&cca_mode,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting cca mode, MLME-SET.confirm status = %d",
status
);
}
return link_to_linux_err(status);
}
/**
* ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210
* @hw: ieee802154_hw of target ca8210
* @level: ED level to set (in mbm)
*
* Sets the minimum threshold of measured energy above which the ca8210 will
* back off and retry a transmission.
*
* Return: 0 or linux error code
*/
static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level)
{
u8 status;
u8 ed_threshold = (level / 100) * 2 + 256;
struct ca8210_priv *priv = hw->priv;
status = hwme_set_request_sync(
HWME_EDTHRESHOLD,
1,
&ed_threshold,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting ed threshold, HWME-SET.confirm status = %d",
status
);
}
return link_to_linux_err(status);
}
/**
* ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210
* @hw: ieee802154_hw of target ca8210
* @min_be: Minimum backoff exponent when backing off a transmission
* @max_be: Maximum backoff exponent when backing off a transmission
* @retries: Number of times to retry after backing off
*
* Return: 0 or linux error code
*/
static int ca8210_set_csma_params(
struct ieee802154_hw *hw,
u8 min_be,
u8 max_be,
u8 retries
)
{
u8 status;
struct ca8210_priv *priv = hw->priv;
status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi);
if (status) {
dev_err(
&priv->spi->dev,
"error setting min be, MLME-SET.confirm status = %d",
status
);
return link_to_linux_err(status);
}
status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi);
if (status) {
dev_err(
&priv->spi->dev,
"error setting max be, MLME-SET.confirm status = %d",
status
);
return link_to_linux_err(status);
}
status = mlme_set_request_sync(
MAC_MAX_CSMA_BACKOFFS,
0,
1,
&retries,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting max csma backoffs, MLME-SET.confirm status = %d",
status
);
}
return link_to_linux_err(status);
}
/**
* ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210
* @hw: ieee802154_hw of target ca8210
* @retries: Number of retries
*
* Sets the number of times to retry a transmission if no acknowledgment was
* received from the other end when one was requested.
*
* Return: 0 or linux error code
*/
static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
{
u8 status;
struct ca8210_priv *priv = hw->priv;
status = mlme_set_request_sync(
MAC_MAX_FRAME_RETRIES,
0,
1,
&retries,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting frame retries, MLME-SET.confirm status = %d",
status
);
}
return link_to_linux_err(status);
}
static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
{
u8 status;
struct ca8210_priv *priv = hw->priv;
status = mlme_set_request_sync(
MAC_PROMISCUOUS_MODE,
0,
1,
(const void *)&on,
priv->spi
);
if (status) {
dev_err(
&priv->spi->dev,
"error setting promiscuous mode, MLME-SET.confirm status = %d",
status
);
} else {
priv->promiscuous = on;
}
return link_to_linux_err(status);
}
static const struct ieee802154_ops ca8210_phy_ops = {
.start = ca8210_start,
.stop = ca8210_stop,
.xmit_async = ca8210_xmit_async,
.ed = ca8210_get_ed,
.set_channel = ca8210_set_channel,
.set_hw_addr_filt = ca8210_set_hw_addr_filt,
.set_txpower = ca8210_set_tx_power,
.set_cca_mode = ca8210_set_cca_mode,
.set_cca_ed_level = ca8210_set_cca_ed_level,
.set_csma_params = ca8210_set_csma_params,
.set_frame_retries = ca8210_set_frame_retries,
.set_promiscuous_mode = ca8210_set_promiscuous_mode
};
/* Test/EVBME Interface */
/**
* ca8210_test_int_open() - Opens the test interface to the userspace
* @inodp: inode representation of file interface
* @filp: file interface
*
* Return: 0 or linux error code
*/
static int ca8210_test_int_open(struct inode *inodp, struct file *filp)
{
struct ca8210_priv *priv = inodp->i_private;
filp->private_data = priv;
return 0;
}
/**
* ca8210_test_check_upstream() - Checks a command received from the upstream
* testing interface for required action
* @buf: Buffer containing command to check
* @device_ref: Nondescript pointer to target device
*
* Return: 0 or linux error code
*/
static int ca8210_test_check_upstream(u8 *buf, void *device_ref)
{
int ret;
u8 response[CA8210_SPI_BUF_SIZE];
if (buf[0] == SPI_MLME_SET_REQUEST) {
ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5);
if (ret) {
response[0] = SPI_MLME_SET_CONFIRM;
response[1] = 3;
response[2] = IEEE802154_INVALID_PARAMETER;
response[3] = buf[2];
response[4] = buf[3];
if (cascoda_api_upstream)
cascoda_api_upstream(response, 5, device_ref);
return ret;
}
}
if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) {
return tdme_channelinit(buf[2], device_ref);
} else if (buf[0] == SPI_MLME_START_REQUEST) {
return tdme_channelinit(buf[4], device_ref);
} else if (
(buf[0] == SPI_MLME_SET_REQUEST) &&
(buf[2] == PHY_CURRENT_CHANNEL)
) {
return tdme_channelinit(buf[5], device_ref);
} else if (
(buf[0] == SPI_TDME_SET_REQUEST) &&
(buf[2] == TDME_CHANNEL)
) {
return tdme_channelinit(buf[4], device_ref);
} else if (
(CA8210_MAC_WORKAROUNDS) &&
(buf[0] == SPI_MLME_RESET_REQUEST) &&
(buf[2] == 1)
) {
/* reset COORD Bit for Channel Filtering as Coordinator */
return tdme_setsfr_request_sync(
0,
CA8210_SFR_MACCON,
0,
device_ref
);
}
return 0;
} /* End of EVBMECheckSerialCommand() */
/**
* ca8210_test_int_user_write() - Called by a process in userspace to send a
* message to the ca8210 drivers
* @filp: file interface
* @in_buf: Buffer containing message to write
* @len: length of message
* @off: file offset
*
* Return: 0 or linux error code
*/
static ssize_t ca8210_test_int_user_write(
struct file *filp,
const char __user *in_buf,
size_t len,
loff_t *off
)
{
int ret;
struct ca8210_priv *priv = filp->private_data;
u8 command[CA8210_SPI_BUF_SIZE];
memset(command, SPI_IDLE, 6);
if (len > CA8210_SPI_BUF_SIZE || len < 2) {
dev_warn(
&priv->spi->dev,
"userspace requested erroneous write length (%zu)\n",
len
);
return -EBADE;
}
ret = copy_from_user(command, in_buf, len);
if (ret) {
dev_err(
&priv->spi->dev,
"%d bytes could not be copied from userspace\n",
ret
);
return -EIO;
}
if (len != command[1] + 2) {
dev_err(
&priv->spi->dev,
"write len does not match packet length field\n"
);
return -EBADE;
}
ret = ca8210_test_check_upstream(command, priv->spi);
if (ret == 0) {
ret = ca8210_spi_exchange(
command,
command[1] + 2,
NULL,
priv->spi
);
if (ret < 0) {
/* effectively 0 bytes were written successfully */
dev_err(
&priv->spi->dev,
"spi exchange failed\n"
);
return ret;
}
if (command[0] & SPI_SYN)
priv->sync_down++;
}
return len;
}
/**
* ca8210_test_int_user_read() - Called by a process in userspace to read a
* message from the ca8210 drivers
* @filp: file interface
* @buf: Buffer to write message to
* @len: length of message to read (ignored)
* @offp: file offset
*
* If the O_NONBLOCK flag was set when opening the file then this function will
* not block, i.e. it will return if the fifo is empty. Otherwise the function
* will block, i.e. wait until new data arrives.
*
* Return: number of bytes read
*/
static ssize_t ca8210_test_int_user_read(
struct file *filp,
char __user *buf,
size_t len,
loff_t *offp
)
{
int i, cmdlen;
struct ca8210_priv *priv = filp->private_data;
unsigned char *fifo_buffer;
unsigned long bytes_not_copied;
if (filp->f_flags & O_NONBLOCK) {
/* Non-blocking mode */
if (kfifo_is_empty(&priv->test.up_fifo))
return 0;
} else {
/* Blocking mode */
wait_event_interruptible(
priv->test.readq,
!kfifo_is_empty(&priv->test.up_fifo)
);
}
if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) {
dev_err(
&priv->spi->dev,
"test_interface: Wrong number of elements popped from upstream fifo\n"
);
return 0;
}
cmdlen = fifo_buffer[1];
bytes_not_copied = cmdlen + 2;
bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied);
if (bytes_not_copied > 0) {
dev_err(
&priv->spi->dev,
"%lu bytes could not be copied to user space!\n",
bytes_not_copied
);
}
dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen);
dev_dbg(&priv->spi->dev, "test_interface: Read\n");
for (i = 0; i < cmdlen + 2; i++)
dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]);
kfree(fifo_buffer);
return cmdlen + 2;
}
/**
* ca8210_test_int_ioctl() - Called by a process in userspace to enact an
* arbitrary action
* @filp: file interface
* @ioctl_num: which action to enact
* @ioctl_param: arbitrary parameter for the action
*
* Return: status
*/
static long ca8210_test_int_ioctl(
struct file *filp,
unsigned int ioctl_num,
unsigned long ioctl_param
)
{
struct ca8210_priv *priv = filp->private_data;
switch (ioctl_num) {
case CA8210_IOCTL_HARD_RESET:
ca8210_reset_send(priv->spi, ioctl_param);
break;
default:
break;
}
return 0;
}
/**
* ca8210_test_int_poll() - Called by a process in userspace to determine which
* actions are currently possible for the file
* @filp: file interface
* @ptable: poll table
*
* Return: set of poll return flags
*/
static __poll_t ca8210_test_int_poll(
struct file *filp,
struct poll_table_struct *ptable
)
{
__poll_t return_flags = 0;
struct ca8210_priv *priv = filp->private_data;
poll_wait(filp, &priv->test.readq, ptable);
if (!kfifo_is_empty(&priv->test.up_fifo))
return_flags |= (EPOLLIN | EPOLLRDNORM);
if (wait_event_interruptible(
priv->test.readq,
!kfifo_is_empty(&priv->test.up_fifo))) {
return EPOLLERR;
}
return return_flags;
}
static const struct file_operations test_int_fops = {
.read = ca8210_test_int_user_read,
.write = ca8210_test_int_user_write,
.open = ca8210_test_int_open,
.release = NULL,
.unlocked_ioctl = ca8210_test_int_ioctl,
.poll = ca8210_test_int_poll
};
/* Init/Deinit */
/**
* ca8210_get_platform_data() - Populate a ca8210_platform_data object
* @spi_device: Pointer to ca8210 spi device object to get data for
* @pdata: Pointer to ca8210_platform_data object to populate
*
* Return: 0 or linux error code
*/
static int ca8210_get_platform_data(
struct spi_device *spi_device,
struct ca8210_platform_data *pdata
)
{
int ret = 0;
if (!spi_device->dev.of_node)
return -EINVAL;
pdata->extclockenable = of_property_read_bool(
spi_device->dev.of_node,
"extclock-enable"
);
if (pdata->extclockenable) {
ret = of_property_read_u32(
spi_device->dev.of_node,
"extclock-freq",
&pdata->extclockfreq
);
if (ret < 0)
return ret;
ret = of_property_read_u32(
spi_device->dev.of_node,
"extclock-gpio",
&pdata->extclockgpio
);
}
return ret;
}
/**
* ca8210_config_extern_clk() - Configure the external clock provided by the
* ca8210
* @pdata: Pointer to ca8210_platform_data containing clock parameters
* @spi: Pointer to target ca8210 spi device
* @on: True to turn the clock on, false to turn off
*
* The external clock is configured with a frequency and output pin taken from
* the platform data.
*
* Return: 0 or linux error code
*/
static int ca8210_config_extern_clk(
struct ca8210_platform_data *pdata,
struct spi_device *spi,
bool on
)
{
u8 clkparam[2];
if (on) {
dev_info(&spi->dev, "Switching external clock on\n");
switch (pdata->extclockfreq) {
case SIXTEEN_MHZ:
clkparam[0] = 1;
break;
case EIGHT_MHZ:
clkparam[0] = 2;
break;
case FOUR_MHZ:
clkparam[0] = 3;
break;
case TWO_MHZ:
clkparam[0] = 4;
break;
case ONE_MHZ:
clkparam[0] = 5;
break;
default:
dev_crit(&spi->dev, "Invalid extclock-freq\n");
return -EINVAL;
}
clkparam[1] = pdata->extclockgpio;
} else {
dev_info(&spi->dev, "Switching external clock off\n");
clkparam[0] = 0; /* off */
clkparam[1] = 0;
}
return link_to_linux_err(
hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi)
);
}
/**
* ca8210_register_ext_clock() - Register ca8210's external clock with kernel
* @spi: Pointer to target ca8210 spi device
*
* Return: 0 or linux error code
*/
static int ca8210_register_ext_clock(struct spi_device *spi)
{
struct device_node *np = spi->dev.of_node;
struct ca8210_priv *priv = spi_get_drvdata(spi);
struct ca8210_platform_data *pdata = spi->dev.platform_data;
int ret = 0;
if (!np)
return -EFAULT;
priv->clk = clk_register_fixed_rate(
&spi->dev,
np->name,
NULL,
0,
pdata->extclockfreq
);
if (IS_ERR(priv->clk)) {
dev_crit(&spi->dev, "Failed to register external clk\n");
return PTR_ERR(priv->clk);
}
ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk);
if (ret) {
clk_unregister(priv->clk);
dev_crit(
&spi->dev,
"Failed to register external clock as clock provider\n"
);
} else {
dev_info(&spi->dev, "External clock set as clock provider\n");
}
return ret;
}
/**
* ca8210_unregister_ext_clock() - Unregister ca8210's external clock with
* kernel
* @spi: Pointer to target ca8210 spi device
*/
static void ca8210_unregister_ext_clock(struct spi_device *spi)
{
struct ca8210_priv *priv = spi_get_drvdata(spi);
if (!priv->clk)
return
of_clk_del_provider(spi->dev.of_node);
clk_unregister(priv->clk);
dev_info(&spi->dev, "External clock unregistered\n");
}
/**
* ca8210_reset_init() - Initialise the reset input to the ca8210
* @spi: Pointer to target ca8210 spi device
*
* Return: 0 or linux error code
*/
static int ca8210_reset_init(struct spi_device *spi)
{
int ret;
struct ca8210_platform_data *pdata = spi->dev.platform_data;
pdata->gpio_reset = of_get_named_gpio(
spi->dev.of_node,
"reset-gpio",
0
);
ret = gpio_direction_output(pdata->gpio_reset, 1);
if (ret < 0) {
dev_crit(
&spi->dev,
"Reset GPIO %d did not set to output mode\n",
pdata->gpio_reset
);
}
return ret;
}
/**
* ca8210_interrupt_init() - Initialise the irq output from the ca8210
* @spi: Pointer to target ca8210 spi device
*
* Return: 0 or linux error code
*/
static int ca8210_interrupt_init(struct spi_device *spi)
{
int ret;
struct ca8210_platform_data *pdata = spi->dev.platform_data;
pdata->gpio_irq = of_get_named_gpio(
spi->dev.of_node,
"irq-gpio",
0
);
pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
if (pdata->irq_id < 0) {
dev_crit(
&spi->dev,
"Could not get irq for gpio pin %d\n",
pdata->gpio_irq
);
gpio_free(pdata->gpio_irq);
return pdata->irq_id;
}
ret = request_irq(
pdata->irq_id,
ca8210_interrupt_handler,
IRQF_TRIGGER_FALLING,
"ca8210-irq",
spi_get_drvdata(spi)
);
if (ret) {
dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
gpio_unexport(pdata->gpio_irq);
gpio_free(pdata->gpio_irq);
}
return ret;
}
/**
* ca8210_dev_com_init() - Initialise the spi communication component
* @priv: Pointer to private data structure
*
* Return: 0 or linux error code
*/
static int ca8210_dev_com_init(struct ca8210_priv *priv)
{
priv->mlme_workqueue = alloc_ordered_workqueue(
"MLME work queue",
WQ_UNBOUND
);
if (!priv->mlme_workqueue) {
dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n");
return -ENOMEM;
}
priv->irq_workqueue = alloc_ordered_workqueue(
"ca8210 irq worker",
WQ_UNBOUND
);
if (!priv->irq_workqueue) {
dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n");
destroy_workqueue(priv->mlme_workqueue);
return -ENOMEM;
}
return 0;
}
/**
* ca8210_dev_com_clear() - Deinitialise the spi communication component
* @priv: Pointer to private data structure
*/
static void ca8210_dev_com_clear(struct ca8210_priv *priv)
{
destroy_workqueue(priv->mlme_workqueue);
destroy_workqueue(priv->irq_workqueue);
}
#define CA8210_MAX_TX_POWERS (9)
static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = {
800, 700, 600, 500, 400, 300, 200, 100, 0
};
#define CA8210_MAX_ED_LEVELS (21)
static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = {
-10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900,
-9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400,
-9350, -9300
};
/**
* ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the
* ca8210's defaults
* @ca8210_hw: Pointer to ieee802154_hw to populate
*/
static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw)
{
/* Support channels 11-26 */
ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS;
ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS;
ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers;
ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS;
ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels;
ca8210_hw->phy->current_channel = 18;
ca8210_hw->phy->current_page = 0;
ca8210_hw->phy->transmit_power = 800;
ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER;
ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND;
ca8210_hw->phy->cca_ed_level = -9800;
ca8210_hw->phy->symbol_duration = 16;
ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration;
ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration;
ca8210_hw->flags =
IEEE802154_HW_AFILT |
IEEE802154_HW_OMIT_CKSUM |
IEEE802154_HW_FRAME_RETRIES |
IEEE802154_HW_PROMISCUOUS |
IEEE802154_HW_CSMA_PARAMS;
ca8210_hw->phy->flags =
WPAN_PHY_FLAG_TXPOWER |
WPAN_PHY_FLAG_CCA_ED_LEVEL |
WPAN_PHY_FLAG_CCA_MODE;
}
/**
* ca8210_test_interface_init() - Initialise the test file interface
* @priv: Pointer to private data structure
*
* Provided as an alternative to the standard linux network interface, the test
* interface exposes a file in the filesystem (ca8210_test) that allows
* 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to
* the stack.
*
* Return: 0 or linux error code
*/
static int ca8210_test_interface_init(struct ca8210_priv *priv)
{
struct ca8210_test *test = &priv->test;
char node_name[32];
snprintf(
node_name,
sizeof(node_name),
"ca8210@%d_%d",
priv->spi->master->bus_num,
priv->spi->chip_select
);
test->ca8210_dfs_spi_int = debugfs_create_file(
node_name,
0600, /* S_IRUSR | S_IWUSR */
NULL,
priv,
&test_int_fops
);
debugfs_create_symlink("ca8210", NULL, node_name);
init_waitqueue_head(&test->readq);
return kfifo_alloc(
&test->up_fifo,
CA8210_TEST_INT_FIFO_SIZE,
GFP_KERNEL
);
}
/**
* ca8210_test_interface_clear() - Deinitialise the test file interface
* @priv: Pointer to private data structure
*/
static void ca8210_test_interface_clear(struct ca8210_priv *priv)
{
struct ca8210_test *test = &priv->test;
debugfs_remove(test->ca8210_dfs_spi_int);
kfifo_free(&test->up_fifo);
dev_info(&priv->spi->dev, "Test interface removed\n");
}
/**
* ca8210_remove() - Shut down a ca8210 upon being disconnected
* @spi_device: Pointer to spi device data structure
*
* Return: 0 or linux error code
*/
static void ca8210_remove(struct spi_device *spi_device)
{
struct ca8210_priv *priv;
struct ca8210_platform_data *pdata;
dev_info(&spi_device->dev, "Removing ca8210\n");
pdata = spi_device->dev.platform_data;
if (pdata) {
if (pdata->extclockenable) {
ca8210_unregister_ext_clock(spi_device);
ca8210_config_extern_clk(pdata, spi_device, 0);
}
free_irq(pdata->irq_id, spi_device->dev.driver_data);
kfree(pdata);
spi_device->dev.platform_data = NULL;
}
/* get spi_device private data */
priv = spi_get_drvdata(spi_device);
if (priv) {
dev_info(
&spi_device->dev,
"sync_down = %d, sync_up = %d\n",
priv->sync_down,
priv->sync_up
);
ca8210_dev_com_clear(spi_device->dev.driver_data);
if (priv->hw) {
if (priv->hw_registered)
ieee802154_unregister_hw(priv->hw);
ieee802154_free_hw(priv->hw);
priv->hw = NULL;
dev_info(
&spi_device->dev,
"Unregistered & freed ieee802154_hw.\n"
);
}
if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS))
ca8210_test_interface_clear(priv);
}
}
/**
* ca8210_probe() - Set up a connected ca8210 upon being detected by the system
* @spi_device: Pointer to spi device data structure
*
* Return: 0 or linux error code
*/
static int ca8210_probe(struct spi_device *spi_device)
{
struct ca8210_priv *priv;
struct ieee802154_hw *hw;
struct ca8210_platform_data *pdata;
int ret;
dev_info(&spi_device->dev, "Inserting ca8210\n");
/* allocate ieee802154_hw and private data */
hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops);
if (!hw) {
dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n");
ret = -ENOMEM;
goto error;
}
priv = hw->priv;
priv->hw = hw;
priv->spi = spi_device;
hw->parent = &spi_device->dev;
spin_lock_init(&priv->lock);
priv->async_tx_pending = false;
priv->hw_registered = false;
priv->sync_up = 0;
priv->sync_down = 0;
priv->promiscuous = false;
priv->retries = 0;
init_completion(&priv->ca8210_is_awake);
init_completion(&priv->spi_transfer_complete);
init_completion(&priv->sync_exchange_complete);
spi_set_drvdata(priv->spi, priv);
if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) {
cascoda_api_upstream = ca8210_test_int_driver_write;
ca8210_test_interface_init(priv);
} else {
cascoda_api_upstream = NULL;
}
ca8210_hw_setup(hw);
ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
goto error;
}
priv->spi->dev.platform_data = pdata;
ret = ca8210_get_platform_data(priv->spi, pdata);
if (ret) {
dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
goto error;
}
ret = ca8210_dev_com_init(priv);
if (ret) {
dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n");
goto error;
}
ret = ca8210_reset_init(priv->spi);
if (ret) {
dev_crit(&spi_device->dev, "ca8210_reset_init failed\n");
goto error;
}
ret = ca8210_interrupt_init(priv->spi);
if (ret) {
dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n");
goto error;
}
msleep(100);
ca8210_reset_send(priv->spi, 1);
ret = tdme_chipinit(priv->spi);
if (ret) {
dev_crit(&spi_device->dev, "tdme_chipinit failed\n");
goto error;
}
if (pdata->extclockenable) {
ret = ca8210_config_extern_clk(pdata, priv->spi, 1);
if (ret) {
dev_crit(
&spi_device->dev,
"ca8210_config_extern_clk failed\n"
);
goto error;
}
ret = ca8210_register_ext_clock(priv->spi);
if (ret) {
dev_crit(
&spi_device->dev,
"ca8210_register_ext_clock failed\n"
);
goto error;
}
}
ret = ieee802154_register_hw(hw);
if (ret) {
dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n");
goto error;
}
priv->hw_registered = true;
return 0;
error:
msleep(100); /* wait for pending spi transfers to complete */
ca8210_remove(spi_device);
return link_to_linux_err(ret);
}
static const struct of_device_id ca8210_of_ids[] = {
{.compatible = "cascoda,ca8210", },
{},
};
MODULE_DEVICE_TABLE(of, ca8210_of_ids);
static struct spi_driver ca8210_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ca8210_of_ids),
},
.probe = ca8210_probe,
.remove = ca8210_remove
};
module_spi_driver(ca8210_spi_driver);
MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>");
MODULE_DESCRIPTION("CA-8210 SoftMAC driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION("1.0");