kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/net/wireless/ath/ath12k/rx_desc.h

1442 lines
46 KiB
C
Raw Permalink Normal View History

Initial commit
2023-08-30 17:53:23 +02:00
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef ATH12K_RX_DESC_H
#define ATH12K_RX_DESC_H
enum rx_desc_decap_type {
RX_DESC_DECAP_TYPE_RAW,
RX_DESC_DECAP_TYPE_NATIVE_WIFI,
RX_DESC_DECAP_TYPE_ETHERNET2_DIX,
RX_DESC_DECAP_TYPE_8023,
};
enum rx_desc_decrypt_status_code {
RX_DESC_DECRYPT_STATUS_CODE_OK,
RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME,
RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR,
RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID,
RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID,
RX_DESC_DECRYPT_STATUS_CODE_OTHER,
};
#define RX_MPDU_START_INFO0_REO_DEST_IND GENMASK(4, 0)
#define RX_MPDU_START_INFO0_LMAC_PEER_ID_MSB GENMASK(6, 5)
#define RX_MPDU_START_INFO0_FLOW_ID_TOEPLITZ BIT(7)
#define RX_MPDU_START_INFO0_PKT_SEL_FP_UCAST_DATA BIT(8)
#define RX_MPDU_START_INFO0_PKT_SEL_FP_MCAST_DATA BIT(9)
#define RX_MPDU_START_INFO0_PKT_SEL_FP_CTRL_BAR BIT(10)
#define RX_MPDU_START_INFO0_RXDMA0_SRC_RING_SEL GENMASK(13, 11)
#define RX_MPDU_START_INFO0_RXDMA0_DST_RING_SEL GENMASK(16, 14)
#define RX_MPDU_START_INFO0_MCAST_ECHO_DROP_EN BIT(17)
#define RX_MPDU_START_INFO0_WDS_LEARN_DETECT_EN BIT(18)
#define RX_MPDU_START_INFO0_INTRA_BSS_CHECK_EN BIT(19)
#define RX_MPDU_START_INFO0_USE_PPE BIT(20)
#define RX_MPDU_START_INFO0_PPE_ROUTING_EN BIT(21)
#define RX_MPDU_START_INFO1_REO_QUEUE_DESC_HI GENMASK(7, 0)
#define RX_MPDU_START_INFO1_RECV_QUEUE_NUM GENMASK(23, 8)
#define RX_MPDU_START_INFO1_PRE_DELIM_ERR_WARN BIT(24)
#define RX_MPDU_START_INFO1_FIRST_DELIM_ERR BIT(25)
#define RX_MPDU_START_INFO2_EPD_EN BIT(0)
#define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD BIT(1)
#define RX_MPDU_START_INFO2_ENC_TYPE GENMASK(5, 2)
#define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH GENMASK(7, 6)
#define RX_MPDU_START_INFO2_MESH_STA GENMASK(9, 8)
#define RX_MPDU_START_INFO2_BSSID_HIT BIT(10)
#define RX_MPDU_START_INFO2_BSSID_NUM GENMASK(14, 11)
#define RX_MPDU_START_INFO2_TID GENMASK(18, 15)
#define RX_MPDU_START_INFO3_RXPCU_MPDU_FLTR GENMASK(1, 0)
#define RX_MPDU_START_INFO3_SW_FRAME_GRP_ID GENMASK(8, 2)
#define RX_MPDU_START_INFO3_NDP_FRAME BIT(9)
#define RX_MPDU_START_INFO3_PHY_ERR BIT(10)
#define RX_MPDU_START_INFO3_PHY_ERR_MPDU_HDR BIT(11)
#define RX_MPDU_START_INFO3_PROTO_VER_ERR BIT(12)
#define RX_MPDU_START_INFO3_AST_LOOKUP_VALID BIT(13)
#define RX_MPDU_START_INFO3_RANGING BIT(14)
#define RX_MPDU_START_INFO4_MPDU_FCTRL_VALID BIT(0)
#define RX_MPDU_START_INFO4_MPDU_DUR_VALID BIT(1)
#define RX_MPDU_START_INFO4_MAC_ADDR1_VALID BIT(2)
#define RX_MPDU_START_INFO4_MAC_ADDR2_VALID BIT(3)
#define RX_MPDU_START_INFO4_MAC_ADDR3_VALID BIT(4)
#define RX_MPDU_START_INFO4_MAC_ADDR4_VALID BIT(5)
#define RX_MPDU_START_INFO4_MPDU_SEQ_CTRL_VALID BIT(6)
#define RX_MPDU_START_INFO4_MPDU_QOS_CTRL_VALID BIT(7)
#define RX_MPDU_START_INFO4_MPDU_HT_CTRL_VALID BIT(8)
#define RX_MPDU_START_INFO4_ENCRYPT_INFO_VALID BIT(9)
#define RX_MPDU_START_INFO4_MPDU_FRAG_NUMBER GENMASK(13, 10)
#define RX_MPDU_START_INFO4_MORE_FRAG_FLAG BIT(14)
#define RX_MPDU_START_INFO4_FROM_DS BIT(16)
#define RX_MPDU_START_INFO4_TO_DS BIT(17)
#define RX_MPDU_START_INFO4_ENCRYPTED BIT(18)
#define RX_MPDU_START_INFO4_MPDU_RETRY BIT(19)
#define RX_MPDU_START_INFO4_MPDU_SEQ_NUM GENMASK(31, 20)
#define RX_MPDU_START_INFO5_KEY_ID GENMASK(7, 0)
#define RX_MPDU_START_INFO5_NEW_PEER_ENTRY BIT(8)
#define RX_MPDU_START_INFO5_DECRYPT_NEEDED BIT(9)
#define RX_MPDU_START_INFO5_DECAP_TYPE GENMASK(11, 10)
#define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING BIT(12)
#define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING BIT(13)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C BIT(14)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S BIT(15)
#define RX_MPDU_START_INFO5_PRE_DELIM_COUNT GENMASK(27, 16)
#define RX_MPDU_START_INFO5_AMPDU_FLAG BIT(28)
#define RX_MPDU_START_INFO5_BAR_FRAME BIT(29)
#define RX_MPDU_START_INFO5_RAW_MPDU BIT(30)
#define RX_MPDU_START_INFO6_MPDU_LEN GENMASK(13, 0)
#define RX_MPDU_START_INFO6_FIRST_MPDU BIT(14)
#define RX_MPDU_START_INFO6_MCAST_BCAST BIT(15)
#define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND BIT(16)
#define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT BIT(17)
#define RX_MPDU_START_INFO6_POWER_MGMT BIT(18)
#define RX_MPDU_START_INFO6_NON_QOS BIT(19)
#define RX_MPDU_START_INFO6_NULL_DATA BIT(20)
#define RX_MPDU_START_INFO6_MGMT_TYPE BIT(21)
#define RX_MPDU_START_INFO6_CTRL_TYPE BIT(22)
#define RX_MPDU_START_INFO6_MORE_DATA BIT(23)
#define RX_MPDU_START_INFO6_EOSP BIT(24)
#define RX_MPDU_START_INFO6_FRAGMENT BIT(25)
#define RX_MPDU_START_INFO6_ORDER BIT(26)
#define RX_MPDU_START_INFO6_UAPSD_TRIGGER BIT(27)
#define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED BIT(28)
#define RX_MPDU_START_INFO6_DIRECTED BIT(29)
#define RX_MPDU_START_INFO6_AMSDU_PRESENT BIT(30)
#define RX_MPDU_START_INFO7_VDEV_ID GENMASK(7, 0)
#define RX_MPDU_START_INFO7_SERVICE_CODE GENMASK(16, 8)
#define RX_MPDU_START_INFO7_PRIORITY_VALID BIT(17)
#define RX_MPDU_START_INFO7_SRC_INFO GENMASK(29, 18)
#define RX_MPDU_START_INFO8_AUTH_TO_SEND_WDS BIT(0)
struct rx_mpdu_start_qcn9274 {
__le32 info0;
__le32 reo_queue_desc_lo;
__le32 info1;
__le32 pn[4];
__le32 info2;
__le32 peer_meta_data;
__le16 info3;
__le16 phy_ppdu_id;
__le16 ast_index;
__le16 sw_peer_id;
__le32 info4;
__le32 info5;
__le32 info6;
__le16 frame_ctrl;
__le16 duration;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[ETH_ALEN];
__le16 qos_ctrl;
__le32 ht_ctrl;
__le32 info7;
u8 multi_link_addr1[ETH_ALEN];
u8 multi_link_addr2[ETH_ALEN];
__le32 info8;
__le32 res0;
__le32 res1;
} __packed;
/* rx_mpdu_start
*
* reo_destination_indication
* The id of the reo exit ring where the msdu frame shall push
* after (MPDU level) reordering has finished. Values are defined
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
*
* lmac_peer_id_msb
*
* If use_flow_id_toeplitz_clfy is set and lmac_peer_id_'sb
* is 2'b00, Rx OLE uses a REO destination indicati'n of {1'b1,
* hash[3:0]} using the chosen Toeplitz hash from Common Parser
* if flow search fails.
* If use_flow_id_toeplitz_clfy is set and lmac_peer_id_msb
* 's not 2'b00, Rx OLE uses a REO destination indication of
* {lmac_peer_id_msb, hash[2:0]} using the chosen Toeplitz
* hash from Common Parser if flow search fails.
*
* use_flow_id_toeplitz_clfy
* Indication to Rx OLE to enable REO destination routing based
* on the chosen Toeplitz hash from Common Parser, in case
* flow search fails
*
* pkt_selection_fp_ucast_data
* Filter pass Unicast data frame (matching rxpcu_filter_pass
* and sw_frame_group_Unicast_data) routing selection
*
* pkt_selection_fp_mcast_data
* Filter pass Multicast data frame (matching rxpcu_filter_pass
* and sw_frame_group_Multicast_data) routing selection
*
* pkt_selection_fp_ctrl_bar
* Filter pass BAR frame (matching rxpcu_filter_pass
* and sw_frame_group_ctrl_1000) routing selection
*
* rxdma0_src_ring_selection
* Field only valid when for the received frame type the corresponding
* pkt_selection_fp_... bit is set
*
* rxdma0_dst_ring_selection
* Field only valid when for the received frame type the corresponding
* pkt_selection_fp_... bit is set
*
* mcast_echo_drop_enable
* If set, for multicast packets, multicast echo check (i.e.
* SA search with mcast_echo_check = 1) shall be performed
* by RXOLE, and any multicast echo packets should be indicated
* to RXDMA for release to WBM
*
* wds_learning_detect_en
* If set, WDS learning detection based on SA search and notification
* to FW (using RXDMA0 status ring) is enabled and the "timestamp"
* field in address search failure cache-only entry should
* be used to avoid multiple WDS learning notifications.
*
* intrabss_check_en
* If set, intra-BSS routing detection is enabled
*
* use_ppe
* Indicates to RXDMA to ignore the REO_destination_indication
* and use a programmed value corresponding to the REO2PPE
* ring
* This override to REO2PPE for packets requiring multiple
* buffers shall be disabled based on an RXDMA configuration,
* as PPE may not support such packets.
*
* Supported only in full AP chips, not in client/soft
* chips
*
* ppe_routing_enable
* Global enable/disable bit for routing to PPE, used to disable
* PPE routing even if RXOLE CCE or flow search indicate 'Use_PPE'
* This is set by SW for peers which are being handled by a
* host SW/accelerator subsystem that also handles packet
* uffer management for WiFi-to-PPE routing.
*
* This is cleared by SW for peers which are being handled
* by a different subsystem, completely disabling WiFi-to-PPE
* routing for such peers.
*
* rx_reo_queue_desc_addr_lo
* Address (lower 32 bits) of the REO queue descriptor.
*
* rx_reo_queue_desc_addr_hi
* Address (upper 8 bits) of the REO queue descriptor.
*
* receive_queue_number
* Indicates the MPDU queue ID to which this MPDU link
* descriptor belongs.
*
* pre_delim_err_warning
* Indicates that a delimiter FCS error was found in between the
* previous MPDU and this MPDU. Note that this is just a warning,
* and does not mean that this MPDU is corrupted in any way. If
* it is, there will be other errors indicated such as FCS or
* decrypt errors.
*
* first_delim_err
* Indicates that the first delimiter had a FCS failure.
*
* pn
* The PN number.
*
* epd_en
* Field only valid when AST_based_lookup_valid == 1.
* In case of ndp or phy_err or AST_based_lookup_valid == 0,
* this field will be set to 0
* If set to one use EPD instead of LPD
* In case of ndp or phy_err, this field will never be set.
*
* all_frames_shall_be_encrypted
* In case of ndp or phy_err or AST_based_lookup_valid == 0,
* this field will be set to 0
*
* When set, all frames (data only ?) shall be encrypted. If
* not, RX CRYPTO shall set an error flag.
*
*
* encrypt_type
* In case of ndp or phy_err or AST_based_lookup_valid == 0,
* this field will be set to 0
*
* Indicates type of decrypt cipher used (as defined in the
* peer entry)
*
* wep_key_width_for_variable_key
*
* Field only valid when key_type is set to wep_varied_width.
*
* mesh_sta
*
* bssid_hit
* When set, the BSSID of the incoming frame matched one of
* the 8 BSSID register values
* bssid_number
* Field only valid when bssid_hit is set.
* This number indicates which one out of the 8 BSSID register
* values matched the incoming frame
*
* tid
* Field only valid when mpdu_qos_control_valid is set
* The TID field in the QoS control field
*
* peer_meta_data
* Meta data that SW has programmed in the Peer table entry
* of the transmitting STA.
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* ndp_frame
* When set, the received frame was an NDP frame, and thus
* there will be no MPDU data.
* phy_err
* When set, a PHY error was received before MAC received any
* data, and thus there will be no MPDU data.
*
* phy_err_during_mpdu_header
* When set, a PHY error was received before MAC received the
* complete MPDU header which was needed for proper decoding
*
* protocol_version_err
* Set when RXPCU detected a version error in the Frame control
* field
*
* ast_based_lookup_valid
* When set, AST based lookup for this frame has found a valid
* result.
*
* ranging
* When set, a ranging NDPA or a ranging NDP was received.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* ast_index
*
* This field indicates the index of the AST entry corresponding
* to this MPDU. It is provided by the GSE module instantiated
* in RXPCU.
* A value of 0xFFFF indicates an invalid AST index, meaning
* that No AST entry was found or NO AST search was performed
*
* sw_peer_id
* In case of ndp or phy_err or AST_based_lookup_valid == 0,
* this field will be set to 0
* This field indicates a unique peer identifier. It is set
* equal to field 'sw_peer_id' from the AST entry
*
* frame_control_valid
* When set, the field Mpdu_Frame_control_field has valid information
*
* frame_duration_valid
* When set, the field Mpdu_duration_field has valid information
*
* mac_addr_ad1..4_valid
* When set, the fields mac_addr_adx_..... have valid information
*
* mpdu_seq_ctrl_valid
*
* When set, the fields mpdu_sequence_control_field and mpdu_sequence_number
* have valid information as well as field
* For MPDUs without a sequence control field, this field will
* not be set.
*
* mpdu_qos_ctrl_valid, mpdu_ht_ctrl_valid
*
* When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
* information, For MPDUs without a QoS,HT control field, this field
* will not be set.
*
* frame_encryption_info_valid
*
* When set, the encryption related info fields, like IV and
* PN are valid
* For MPDUs that are not encrypted, this will not be set.
*
* mpdu_fragment_number
*
* Field only valid when Mpdu_sequence_control_valid is set
* AND Fragment_flag is set. The fragment number from the 802.11 header
*
* more_fragment_flag
*
* The More Fragment bit setting from the MPDU header of the
* received frame
*
* fr_ds
*
* Field only valid when Mpdu_frame_control_valid is set
* Set if the from DS bit is set in the frame control.
*
* to_ds
*
* Field only valid when Mpdu_frame_control_valid is set
* Set if the to DS bit is set in the frame control.
*
* encrypted
*
* Field only valid when Mpdu_frame_control_valid is set.
* Protected bit from the frame control.
*
* mpdu_retry
* Field only valid when Mpdu_frame_control_valid is set.
* Retry bit from the frame control. Only valid when first_msdu is set
*
* mpdu_sequence_number
* Field only valid when Mpdu_sequence_control_valid is set.
*
* The sequence number from the 802.11 header.
* key_id
* The key ID octet from the IV.
* Field only valid when Frame_encryption_info_valid is set
*
* new_peer_entry
* Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY
* doesn't follow so RX DECRYPTION module either uses old peer
* entry or not decrypt.
*
* decrypt_needed
* When RXPCU sets bit 'ast_index_not_found or ast_index_timeout',
* RXPCU will also ensure that this bit is NOT set. CRYPTO for that
* reason only needs to evaluate this bit and non of the other ones
*
* decap_type
* Used by the OLE during decapsulation. Values are defined in
* enum %MPDU_START_DECAP_TYPE_*.
*
* rx_insert_vlan_c_tag_padding
* rx_insert_vlan_s_tag_padding
* Insert 4 byte of all zeros as VLAN tag or double VLAN tag if
* the rx payload does not have VLAN.
*
* strip_vlan_c_tag_decap
* strip_vlan_s_tag_decap
* Strip VLAN or double VLAN during decapsulation.
*
* pre_delim_count
* The number of delimiters before this MPDU. Note that this
* number is cleared at PPDU start. If this MPDU is the first
* received MPDU in the PPDU and this MPDU gets filtered-in,
* this field will indicate the number of delimiters located
* after the last MPDU in the previous PPDU.
*
* If this MPDU is located after the first received MPDU in
* an PPDU, this field will indicate the number of delimiters
* located between the previous MPDU and this MPDU.
*
* ampdu_flag
* Received frame was part of an A-MPDU.
*
* bar_frame
* Received frame is a BAR frame
*
* raw_mpdu
* Set when no 802.11 to nwifi/ethernet hdr conversion is done
*
* mpdu_length
* MPDU length before decapsulation.
*
* first_mpdu
* Indicates the first MSDU of the PPDU. If both first_mpdu
* and last_mpdu are set in the MSDU then this is a not an
* A-MPDU frame but a stand alone MPDU. Interior MPDU in an
* A-MPDU shall have both first_mpdu and last_mpdu bits set to
* 0. The PPDU start status will only be valid when this bit
* is set.
*
* mcast_bcast
* Multicast / broadcast indicator. Only set when the MAC
* address 1 bit 0 is set indicating mcast/bcast and the BSSID
* matches one of the 4 BSSID registers. Only set when
* first_msdu is set.
*
* ast_index_not_found
* Only valid when first_msdu is set. Indicates no AST matching
* entries within the max search count.
*
* ast_index_timeout
* Only valid when first_msdu is set. Indicates an unsuccessful
* search in the address search table due to timeout.
*
* power_mgmt
* Power management bit set in the 802.11 header. Only set
* when first_msdu is set.
*
* non_qos
* Set if packet is not a non-QoS data frame. Only set when
* first_msdu is set.
*
* null_data
* Set if frame type indicates either null data or QoS null
* data format. Only set when first_msdu is set.
*
* mgmt_type
* Set if packet is a management packet. Only set when
* first_msdu is set.
*
* ctrl_type
* Set if packet is a control packet. Only set when first_msdu
* is set.
*
* more_data
* Set if more bit in frame control is set. Only set when
* first_msdu is set.
*
* eosp
* Set if the EOSP (end of service period) bit in the QoS
* control field is set. Only set when first_msdu is set.
*
*
* fragment_flag
* Fragment indication
*
* order
* Set if the order bit in the frame control is set. Only
* set when first_msdu is set.
*
* u_apsd_trigger
* U-APSD trigger frame
*
* encrypt_required
* Indicates that this data type frame is not encrypted even if
* the policy for this MPDU requires encryption as indicated in
* the peer table key type.
*
* directed
* MPDU is a directed packet which means that the RA matched
* our STA addresses. In proxySTA it means that the TA matched
* an entry in our address search table with the corresponding
* 'no_ack' bit is the address search entry cleared.
* amsdu_present
* AMSDU present
*
* mpdu_frame_control_field
* Frame control field in header. Only valid when the field is marked valid.
*
* mpdu_duration_field
* Duration field in header. Only valid when the field is marked valid.
*
* mac_addr_adx
* MAC addresses in the received frame. Only valid when corresponding
* address valid bit is set
*
* mpdu_qos_control_field, mpdu_ht_control_field
* QoS/HT control fields from header. Valid only when corresponding fields
* are marked valid
*
* vdev_id
* Virtual device associated with this peer
* RXOLE uses this to determine intra-BSS routing.
*
* service_code
* Opaque service code between PPE and Wi-Fi
* This field gets passed on by REO to PPE in the EDMA descriptor
* ('REO_TO_PPE_RING').
*
* priority_valid
* This field gets passed on by REO to PPE in the EDMA descriptor
* ('REO_TO_PPE_RING').
*
* src_info
* Source (virtual) device/interface info. associated with
* this peer
* This field gets passed on by REO to PPE in the EDMA descriptor
* ('REO_TO_PPE_RING').
*
* multi_link_addr_ad1_ad2_valid
* If set, Rx OLE shall convert Address1 and Address2 of received
* data frames to multi-link addresses during decapsulation to eth/nwifi
*
* multi_link_addr_ad1,ad2
* Multi-link receiver address1,2. Only valid when corresponding
* valid bit is set
*
* authorize_to_send_wds
* If not set, RXDMA shall perform error-routing for WDS packets
* as the sender is not authorized and might misuse WDS frame
* format to inject packets with arbitrary DA/SA.
*
*/
enum rx_msdu_start_pkt_type {
RX_MSDU_START_PKT_TYPE_11A,
RX_MSDU_START_PKT_TYPE_11B,
RX_MSDU_START_PKT_TYPE_11N,
RX_MSDU_START_PKT_TYPE_11AC,
RX_MSDU_START_PKT_TYPE_11AX,
};
enum rx_msdu_start_sgi {
RX_MSDU_START_SGI_0_8_US,
RX_MSDU_START_SGI_0_4_US,
RX_MSDU_START_SGI_1_6_US,
RX_MSDU_START_SGI_3_2_US,
};
enum rx_msdu_start_recv_bw {
RX_MSDU_START_RECV_BW_20MHZ,
RX_MSDU_START_RECV_BW_40MHZ,
RX_MSDU_START_RECV_BW_80MHZ,
RX_MSDU_START_RECV_BW_160MHZ,
};
enum rx_msdu_start_reception_type {
RX_MSDU_START_RECEPTION_TYPE_SU,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO,
};
#define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0)
#define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2)
#define RX_MSDU_END_INFO1_REPORTED_MPDU_LENGTH GENMASK(13, 0)
#define RX_MSDU_END_INFO2_CCE_SUPER_RULE GENMASK(13, 8)
#define RX_MSDU_END_INFO2_CCND_TRUNCATE BIT(14)
#define RX_MSDU_END_INFO2_CCND_CCE_DIS BIT(15)
#define RX_MSDU_END_INFO3_DA_OFFSET GENMASK(5, 0)
#define RX_MSDU_END_INFO3_SA_OFFSET GENMASK(11, 6)
#define RX_MSDU_END_INFO3_DA_OFFSET_VALID BIT(12)
#define RX_MSDU_END_INFO3_SA_OFFSET_VALID BIT(13)
#define RX_MSDU_END_INFO4_TCP_FLAG GENMASK(8, 0)
#define RX_MSDU_END_INFO4_LRO_ELIGIBLE BIT(9)
#define RX_MSDU_END_INFO5_SA_IDX_TIMEOUT BIT(0)
#define RX_MSDU_END_INFO5_DA_IDX_TIMEOUT BIT(1)
#define RX_MSDU_END_INFO5_TO_DS BIT(2)
#define RX_MSDU_END_INFO5_TID GENMASK(6, 3)
#define RX_MSDU_END_INFO5_SA_IS_VALID BIT(7)
#define RX_MSDU_END_INFO5_DA_IS_VALID BIT(8)
#define RX_MSDU_END_INFO5_DA_IS_MCBC BIT(9)
#define RX_MSDU_END_INFO5_L3_HDR_PADDING GENMASK(11, 10)
#define RX_MSDU_END_INFO5_FIRST_MSDU BIT(12)
#define RX_MSDU_END_INFO5_LAST_MSDU BIT(13)
#define RX_MSDU_END_INFO5_FROM_DS BIT(14)
#define RX_MSDU_END_INFO5_IP_CHKSUM_FAIL_COPY BIT(15)
#define RX_MSDU_END_INFO6_MSDU_DROP BIT(0)
#define RX_MSDU_END_INFO6_REO_DEST_IND GENMASK(5, 1)
#define RX_MSDU_END_INFO6_FLOW_IDX GENMASK(25, 6)
#define RX_MSDU_END_INFO6_USE_PPE BIT(26)
#define RX_MSDU_END_INFO6_MESH_STA GENMASK(28, 27)
#define RX_MSDU_END_INFO6_VLAN_CTAG_STRIPPED BIT(29)
#define RX_MSDU_END_INFO6_VLAN_STAG_STRIPPED BIT(30)
#define RX_MSDU_END_INFO6_FRAGMENT_FLAG BIT(31)
#define RX_MSDU_END_INFO7_AGGR_COUNT GENMASK(7, 0)
#define RX_MSDU_END_INFO7_FLOW_AGGR_CONTN BIT(8)
#define RX_MSDU_END_INFO7_FISA_TIMEOUT BIT(9)
#define RX_MSDU_END_INFO7_TCPUDP_CSUM_FAIL_CPY BIT(10)
#define RX_MSDU_END_INFO7_MSDU_LIMIT_ERROR BIT(11)
#define RX_MSDU_END_INFO7_FLOW_IDX_TIMEOUT BIT(12)
#define RX_MSDU_END_INFO7_FLOW_IDX_INVALID BIT(13)
#define RX_MSDU_END_INFO7_CCE_MATCH BIT(14)
#define RX_MSDU_END_INFO7_AMSDU_PARSER_ERR BIT(15)
#define RX_MSDU_END_INFO8_KEY_ID GENMASK(7, 0)
#define RX_MSDU_END_INFO9_SERVICE_CODE GENMASK(14, 6)
#define RX_MSDU_END_INFO9_PRIORITY_VALID BIT(15)
#define RX_MSDU_END_INFO9_INRA_BSS BIT(16)
#define RX_MSDU_END_INFO9_DEST_CHIP_ID GENMASK(18, 17)
#define RX_MSDU_END_INFO9_MCAST_ECHO BIT(19)
#define RX_MSDU_END_INFO9_WDS_LEARN_EVENT BIT(20)
#define RX_MSDU_END_INFO9_WDS_ROAM_EVENT BIT(21)
#define RX_MSDU_END_INFO9_WDS_KEEP_ALIVE_EVENT BIT(22)
#define RX_MSDU_END_INFO10_MSDU_LENGTH GENMASK(13, 0)
#define RX_MSDU_END_INFO10_STBC BIT(14)
#define RX_MSDU_END_INFO10_IPSEC_ESP BIT(15)
#define RX_MSDU_END_INFO10_L3_OFFSET GENMASK(22, 16)
#define RX_MSDU_END_INFO10_IPSEC_AH BIT(23)
#define RX_MSDU_END_INFO10_L4_OFFSET GENMASK(31, 24)
#define RX_MSDU_END_INFO11_MSDU_NUMBER GENMASK(7, 0)
#define RX_MSDU_END_INFO11_DECAP_FORMAT GENMASK(9, 8)
#define RX_MSDU_END_INFO11_IPV4 BIT(10)
#define RX_MSDU_END_INFO11_IPV6 BIT(11)
#define RX_MSDU_END_INFO11_TCP BIT(12)
#define RX_MSDU_END_INFO11_UDP BIT(13)
#define RX_MSDU_END_INFO11_IP_FRAG BIT(14)
#define RX_MSDU_END_INFO11_TCP_ONLY_ACK BIT(15)
#define RX_MSDU_END_INFO11_DA_IS_BCAST_MCAST BIT(16)
#define RX_MSDU_END_INFO11_SEL_TOEPLITZ_HASH GENMASK(18, 17)
#define RX_MSDU_END_INFO11_IP_FIXED_HDR_VALID BIT(19)
#define RX_MSDU_END_INFO11_IP_EXTN_HDR_VALID BIT(20)
#define RX_MSDU_END_INFO11_IP_TCP_UDP_HDR_VALID BIT(21)
#define RX_MSDU_END_INFO11_MESH_CTRL_PRESENT BIT(22)
#define RX_MSDU_END_INFO11_LDPC BIT(23)
#define RX_MSDU_END_INFO11_IP4_IP6_NXT_HDR GENMASK(31, 24)
#define RX_MSDU_END_INFO12_USER_RSSI GENMASK(7, 0)
#define RX_MSDU_END_INFO12_PKT_TYPE GENMASK(11, 8)
#define RX_MSDU_END_INFO12_SGI GENMASK(13, 12)
#define RX_MSDU_END_INFO12_RATE_MCS GENMASK(17, 14)
#define RX_MSDU_END_INFO12_RECV_BW GENMASK(20, 18)
#define RX_MSDU_END_INFO12_RECEPTION_TYPE GENMASK(23, 21)
#define RX_MSDU_END_INFO12_MIMO_SS_BITMAP GENMASK(30, 24)
#define RX_MSDU_END_INFO12_MIMO_DONE_COPY BIT(31)
#define RX_MSDU_END_INFO13_FIRST_MPDU BIT(0)
#define RX_MSDU_END_INFO13_MCAST_BCAST BIT(2)
#define RX_MSDU_END_INFO13_AST_IDX_NOT_FOUND BIT(3)
#define RX_MSDU_END_INFO13_AST_IDX_TIMEDOUT BIT(4)
#define RX_MSDU_END_INFO13_POWER_MGMT BIT(5)
#define RX_MSDU_END_INFO13_NON_QOS BIT(6)
#define RX_MSDU_END_INFO13_NULL_DATA BIT(7)
#define RX_MSDU_END_INFO13_MGMT_TYPE BIT(8)
#define RX_MSDU_END_INFO13_CTRL_TYPE BIT(9)
#define RX_MSDU_END_INFO13_MORE_DATA BIT(10)
#define RX_MSDU_END_INFO13_EOSP BIT(11)
#define RX_MSDU_END_INFO13_A_MSDU_ERROR BIT(12)
#define RX_MSDU_END_INFO13_ORDER BIT(14)
#define RX_MSDU_END_INFO13_WIFI_PARSER_ERR BIT(15)
#define RX_MSDU_END_INFO13_OVERFLOW_ERR BIT(16)
#define RX_MSDU_END_INFO13_MSDU_LEN_ERR BIT(17)
#define RX_MSDU_END_INFO13_TCP_UDP_CKSUM_FAIL BIT(18)
#define RX_MSDU_END_INFO13_IP_CKSUM_FAIL BIT(19)
#define RX_MSDU_END_INFO13_SA_IDX_INVALID BIT(20)
#define RX_MSDU_END_INFO13_DA_IDX_INVALID BIT(21)
#define RX_MSDU_END_INFO13_AMSDU_ADDR_MISMATCH BIT(22)
#define RX_MSDU_END_INFO13_RX_IN_TX_DECRYPT_BYP BIT(23)
#define RX_MSDU_END_INFO13_ENCRYPT_REQUIRED BIT(24)
#define RX_MSDU_END_INFO13_DIRECTED BIT(25)
#define RX_MSDU_END_INFO13_BUFFER_FRAGMENT BIT(26)
#define RX_MSDU_END_INFO13_MPDU_LEN_ERR BIT(27)
#define RX_MSDU_END_INFO13_TKIP_MIC_ERR BIT(28)
#define RX_MSDU_END_INFO13_DECRYPT_ERR BIT(29)
#define RX_MSDU_END_INFO13_UNDECRYPT_FRAME_ERR BIT(30)
#define RX_MSDU_END_INFO13_FCS_ERR BIT(31)
#define RX_MSDU_END_INFO14_DECRYPT_STATUS_CODE GENMASK(12, 10)
#define RX_MSDU_END_INFO14_RX_BITMAP_NOT_UPDED BIT(13)
#define RX_MSDU_END_INFO14_MSDU_DONE BIT(31)
struct rx_msdu_end_qcn9274 {
__le16 info0;
__le16 phy_ppdu_id;
__le16 ip_hdr_cksum;
__le16 info1;
__le16 info2;
__le16 cumulative_l3_checksum;
__le32 rule_indication0;
__le32 ipv6_options_crc;
__le16 info3;
__le16 l3_type;
__le32 rule_indication1;
__le32 tcp_seq_num;
__le32 tcp_ack_num;
__le16 info4;
__le16 window_size;
__le16 sa_sw_peer_id;
__le16 info5;
__le16 sa_idx;
__le16 da_idx_or_sw_peer_id;
__le32 info6;
__le32 fse_metadata;
__le16 cce_metadata;
__le16 tcp_udp_cksum;
__le16 info7;
__le16 cumulative_ip_length;
__le32 info8;
__le32 info9;
__le32 info10;
__le32 info11;
__le16 vlan_ctag_ci;
__le16 vlan_stag_ci;
__le32 peer_meta_data;
__le32 info12;
__le32 flow_id_toeplitz;
__le32 ppdu_start_timestamp_63_32;
__le32 phy_meta_data;
__le32 ppdu_start_timestamp_31_0;
__le32 toeplitz_hash_2_or_4;
__le16 res0;
__le16 sa_15_0;
__le32 sa_47_16;
__le32 info13;
__le32 info14;
} __packed;
/* rx_msdu_end
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* ip_hdr_cksum
* This can include the IP header checksum or the pseudo
* header checksum used by TCP/UDP checksum.
*
* reported_mpdu_length
* MPDU length before decapsulation. Only valid when first_msdu is
* set. This field is taken directly from the length field of the
* A-MPDU delimiter or the preamble length field for non-A-MPDU
* frames.
*
* cce_super_rule
* Indicates the super filter rule.
*
* cce_classify_not_done_truncate
* Classification failed due to truncated frame.
*
* cce_classify_not_done_cce_dis
* Classification failed due to CCE global disable
*
* cumulative_l3_checksum
* FISA: IP header checksum including the total MSDU length
* that is part of this flow aggregated so far, reported if
* 'RXOLE_R0_FISA_CTRL. CHKSUM_CUM_IP_LEN_EN' is set
*
* rule_indication
* Bitmap indicating which of rules have matched.
*
* ipv6_options_crc
* 32 bit CRC computed out of IP v6 extension headers.
*
* da_offset
* Offset into MSDU buffer for DA.
*
* sa_offset
* Offset into MSDU buffer for SA.
*
* da_offset_valid
* da_offset field is valid. This will be set to 0 in case
* of a dynamic A-MSDU when DA is compressed.
*
* sa_offset_valid
* sa_offset field is valid. This will be set to 0 in case
* of a dynamic A-MSDU when SA is compressed.
*
* l3_type
* The 16-bit type value indicating the type of L3 later
* extracted from LLC/SNAP, set to zero if SNAP is not
* available.
*
* tcp_seq_number
* TCP sequence number.
*
* tcp_ack_number
* TCP acknowledge number.
*
* tcp_flag
* TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}.
*
* lro_eligible
* Computed out of TCP and IP fields to indicate that this
* MSDU is eligible for LRO.
*
* window_size
* TCP receive window size.
*
* sa_sw_peer_id
* sw_peer_id from the address search entry corresponding to the
* source address of the MSDU.
*
* sa_idx_timeout
* Indicates an unsuccessful MAC source address search due to the
* expiring of the search timer.
*
* da_idx_timeout
* Indicates an unsuccessful MAC destination address search due to
* the expiring of the search timer.
*
* to_ds
* Set if the to DS bit is set in the frame control.
*
* tid
* TID field in the QoS control field
*
* sa_is_valid
* Indicates that OLE found a valid SA entry.
*
* da_is_valid
* Indicates that OLE found a valid DA entry.
*
* da_is_mcbc
* Field Only valid if da_is_valid is set. Indicates the DA address
* was a Multicast of Broadcast address.
*
* l3_header_padding
* Number of bytes padded to make sure that the L3 header will
* always start of a Dword boundary.
*
* first_msdu
* Indicates the first MSDU of A-MSDU. If both first_msdu and
* last_msdu are set in the MSDU then this is a non-aggregated MSDU
* frame: normal MPDU. Interior MSDU in an A-MSDU shall have both
* first_mpdu and last_mpdu bits set to 0.
*
* last_msdu
* Indicates the last MSDU of the A-MSDU. MPDU end status is only
* valid when last_msdu is set.
*
* fr_ds
* Set if the from DS bit is set in the frame control.
*
* ip_chksum_fail_copy
* Indicates that the computed checksum did not match the
* checksum in the IP header.
*
* sa_idx
* The offset in the address table which matches the MAC source
* address.
*
* da_idx_or_sw_peer_id
* Based on a register configuration in RXOLE, this field will
* contain:
* The offset in the address table which matches the MAC destination
* address
* OR:
* sw_peer_id from the address search entry corresponding to
* the destination address of the MSDU
*
* msdu_drop
* REO shall drop this MSDU and not forward it to any other ring.
*
* The id of the reo exit ring where the msdu frame shall push
* after (MPDU level) reordering has finished. Values are defined
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
*
* flow_idx
* Flow table index.
*
* use_ppe
* Indicates to RXDMA to ignore the REO_destination_indication
* and use a programmed value corresponding to the REO2PPE
* ring
*
* mesh_sta
* When set, this is a Mesh (11s) STA.
*
* vlan_ctag_stripped
* Set by RXOLE if it stripped 4-bytes of C-VLAN Tag from the
* packet
*
* vlan_stag_stripped
* Set by RXOLE if it stripped 4-bytes of S-VLAN Tag from the
* packet
*
* fragment_flag
* Indicates that this is an 802.11 fragment frame. This is
* set when either the more_frag bit is set in the frame control
* or the fragment number is not zero. Only set when first_msdu
* is set.
*
* fse_metadata
* FSE related meta data.
*
* cce_metadata
* CCE related meta data.
*
* tcp_udp_chksum
* The value of the computed TCP/UDP checksum. A mode bit
* selects whether this checksum is the full checksum or the
* partial checksum which does not include the pseudo header.
*
* aggregation_count
* Number of MSDU's aggregated so far
*
* flow_aggregation_continuation
* To indicate that this MSDU can be aggregated with
* the previous packet with the same flow id
*
* fisa_timeout
* To indicate that the aggregation has restarted for
* this flow due to timeout
*
* tcp_udp_chksum_fail
* Indicates that the computed checksum (tcp_udp_chksum) did
* not match the checksum in the TCP/UDP header.
*
* msdu_limit_error
* Indicates that the MSDU threshold was exceeded and thus all the
* rest of the MSDUs will not be scattered and will not be
* decapsulated but will be DMA'ed in RAW format as a single MSDU.
*
* flow_idx_timeout
* Indicates an unsuccessful flow search due to the expiring of
* the search timer.
*
* flow_idx_invalid
* flow id is not valid.
*
* cce_match
* Indicates that this status has a corresponding MSDU that
* requires FW processing. The OLE will have classification
* ring mask registers which will indicate the ring(s) for
* packets and descriptors which need FW attention.
*
* amsdu_parser_error
* A-MSDU could not be properly de-agregated.
*
* cumulative_ip_length
* Total MSDU length that is part of this flow aggregated
* so far
*
* key_id
* The key ID octet from the IV. Only valid when first_msdu is set.
*
* service_code
* Opaque service code between PPE and Wi-Fi
*
* priority_valid
* This field gets passed on by REO to PPE in the EDMA descriptor
*
* intra_bss
* This packet needs intra-BSS routing by SW as the 'vdev_id'
* for the destination is the same as 'vdev_id' (from 'RX_MPDU_PCU_START')
* that this MSDU was got in.
*
* dest_chip_id
* If intra_bss is set, copied by RXOLE from 'ADDR_SEARCH_ENTRY'
* to support intra-BSS routing with multi-chip multi-link
* operation. This indicates into which chip's TCL the packet should be
* queueued
*
* multicast_echo
* If set, this packet is a multicast echo, i.e. the DA is
* multicast and Rx OLE SA search with mcast_echo_check = 1
* passed. RXDMA should release such packets to WBM.
*
* wds_learning_event
* If set, this packet has an SA search failure with WDS learning
* enabled for the peer. RXOLE should route this TLV to the
* RXDMA0 status ring to notify FW.
*
* wds_roaming_event
* If set, this packet's SA 'Sw_peer_id' mismatches the 'Sw_peer_id'
* of the peer through which the packet was got, indicating
* the SA node has roamed. RXOLE should route this TLV to
* the RXDMA0 status ring to notify FW.
*
* wds_keep_alive_event
* If set, the AST timestamp for this packet's SA is older
* than the current timestamp by more than a threshold programmed
* in RXOLE. RXOLE should route this TLV to the RXDMA0 status
* ring to notify FW to keep the AST entry for the SA alive.
*
* msdu_length
* MSDU length in bytes after decapsulation.
* This field is still valid for MPDU frames without A-MSDU.
* It still represents MSDU length after decapsulation
*
* stbc
* When set, use STBC transmission rates.
*
* ipsec_esp
* Set if IPv4/v6 packet is using IPsec ESP.
*
* l3_offset
* Depending upon mode bit, this field either indicates the
* L3 offset in bytes from the start of the RX_HEADER or the IP
* offset in bytes from the start of the packet after
* decapsulation. The latter is only valid if ipv4_proto or
* ipv6_proto is set.
*
* ipsec_ah
* Set if IPv4/v6 packet is using IPsec AH
*
* l4_offset
* Depending upon mode bit, this field either indicates the
* L4 offset nin bytes from the start of RX_HEADER (only valid
* if either ipv4_proto or ipv6_proto is set to 1) or indicates
* the offset in bytes to the start of TCP or UDP header from
* the start of the IP header after decapsulation (Only valid if
* tcp_proto or udp_proto is set). The value 0 indicates that
* the offset is longer than 127 bytes.
*
* msdu_number
* Indicates the MSDU number within a MPDU. This value is
* reset to zero at the start of each MPDU. If the number of
* MSDU exceeds 255 this number will wrap using modulo 256.
*
* decap_type
* Indicates the format after decapsulation. Values are defined in
* enum %MPDU_START_DECAP_TYPE_*.
*
* ipv4_proto
* Set if L2 layer indicates IPv4 protocol.
*
* ipv6_proto
* Set if L2 layer indicates IPv6 protocol.
*
* tcp_proto
* Set if the ipv4_proto or ipv6_proto are set and the IP protocol
* indicates TCP.
*
* udp_proto
* Set if the ipv4_proto or ipv6_proto are set and the IP protocol
* indicates UDP.
*
* ip_frag
* Indicates that either the IP More frag bit is set or IP frag
* number is non-zero. If set indicates that this is a fragmented
* IP packet.
*
* tcp_only_ack
* Set if only the TCP Ack bit is set in the TCP flags and if
* the TCP payload is 0.
*
* da_is_bcast_mcast
* The destination address is broadcast or multicast.
*
* toeplitz_hash
* Actual chosen Hash.
* 0 - Toeplitz hash of 2-tuple (IP source address, IP
* destination address)
* 1 - Toeplitz hash of 4-tuple (IP source address,
* IP destination address, L4 (TCP/UDP) source port,
* L4 (TCP/UDP) destination port)
* 2 - Toeplitz of flow_id
* 3 - Zero is used
*
* ip_fixed_header_valid
* Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed
* fully within first 256 bytes of the packet
*
* ip_extn_header_valid
* IPv6/IPv6 header, including IPv4 options and
* recognizable extension headers parsed fully within first 256
* bytes of the packet
*
* tcp_udp_header_valid
* Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP
* header parsed fully within first 256 bytes of the packet
*
* mesh_control_present
* When set, this MSDU includes the 'Mesh Control' field
*
* ldpc
*
* ip4_protocol_ip6_next_header
* For IPv4, this is the 8 bit protocol field set). For IPv6 this
* is the 8 bit next_header field.
*
*
* vlan_ctag_ci
* 2 bytes of C-VLAN Tag Control Information from WHO_L2_LLC
*
* vlan_stag_ci
* 2 bytes of S-VLAN Tag Control Information from WHO_L2_LLC
* in case of double VLAN
*
* peer_meta_data
* Meta data that SW has programmed in the Peer table entry
* of the transmitting STA.
*
* user_rssi
* RSSI for this user
*
* pkt_type
* Values are defined in enum %RX_MSDU_START_PKT_TYPE_*.
*
* sgi
* Field only valid when pkt type is HT, VHT or HE. Values are
* defined in enum %RX_MSDU_START_SGI_*.
*
* rate_mcs
* MCS Rate used.
*
* receive_bandwidth
* Full receive Bandwidth. Values are defined in enum
* %RX_MSDU_START_RECV_*.
*
* reception_type
* Indicates what type of reception this is and defined in enum
* %RX_MSDU_START_RECEPTION_TYPE_*.
*
* mimo_ss_bitmap
* Field only valid when
* Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or
* RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO.
*
* Bitmap, with each bit indicating if the related spatial
* stream is used for this STA
*
* LSB related to SS 0
*
* 0 - spatial stream not used for this reception
* 1 - spatial stream used for this reception
*
* msdu_done_copy
* If set indicates that the RX packet data, RX header data,
* RX PPDU start descriptor, RX MPDU start/end descriptor,
* RX MSDU start/end descriptors and RX Attention descriptor
* are all valid. This bit is in the last 64-bit of the descriptor
* expected to be subscribed in future hardware.
*
* flow_id_toeplitz
* Toeplitz hash of 5-tuple
* {IP source address, IP destination address, IP source port, IP
* destination port, L4 protocol} in case of non-IPSec.
*
* In case of IPSec - Toeplitz hash of 4-tuple
* {IP source address, IP destination address, SPI, L4 protocol}
*
* The relevant Toeplitz key registers are provided in RxOLE's
* instance of common parser module. These registers are separate
* from the Toeplitz keys used by ASE/FSE modules inside RxOLE.
* The actual value will be passed on from common parser module
* to RxOLE in one of the WHO_* TLVs.
*
* ppdu_start_timestamp
* Timestamp that indicates when the PPDU that contained this MPDU
* started on the medium.
*
* phy_meta_data
* SW programmed Meta data provided by the PHY. Can be used for SW
* to indicate the channel the device is on.
*
* toeplitz_hash_2_or_4
* Controlled by multiple RxOLE registers for TCP/UDP over
* IPv4/IPv6 - Either, Toeplitz hash computed over 2-tuple
* IPv4 or IPv6 src/dest addresses is reported; or, Toeplitz
* hash computed over 4-tuple IPv4 or IPv6 src/dest addresses
* and src/dest ports is reported. The Flow_id_toeplitz hash
* can also be reported here. Usually the hash reported here
* is the one used for hash-based REO routing (see use_flow_id_toeplitz_clfy
* in 'RXPT_CLASSIFY_INFO').
*
* sa
* Source MAC address
*
* first_mpdu
* Indicates the first MSDU of the PPDU. If both first_mpdu
* and last_mpdu are set in the MSDU then this is a not an
* A-MPDU frame but a stand alone MPDU. Interior MPDU in an
* A-MPDU shall have both first_mpdu and last_mpdu bits set to
* 0. The PPDU start status will only be valid when this bit
* is set.
*
* mcast_bcast
* Multicast / broadcast indicator. Only set when the MAC
* address 1 bit 0 is set indicating mcast/bcast and the BSSID
* matches one of the 4 BSSID registers. Only set when
* first_msdu is set.
*
* ast_index_not_found
* Only valid when first_msdu is set. Indicates no AST matching
* entries within the max search count.
*
* ast_index_timeout
* Only valid when first_msdu is set. Indicates an unsuccessful
* search in the address search table due to timeout.
*
* power_mgmt
* Power management bit set in the 802.11 header. Only set
* when first_msdu is set.
*
* non_qos
* Set if packet is not a non-QoS data frame. Only set when
* first_msdu is set.
*
* null_data
* Set if frame type indicates either null data or QoS null
* data format. Only set when first_msdu is set.
*
* mgmt_type
* Set if packet is a management packet. Only set when
* first_msdu is set.
*
* ctrl_type
* Set if packet is a control packet. Only set when first_msdu
* is set.
*
* more_data
* Set if more bit in frame control is set. Only set when
* first_msdu is set.
*
* eosp
* Set if the EOSP (end of service period) bit in the QoS
* control field is set. Only set when first_msdu is set.
*
* a_msdu_error
* Set if number of MSDUs in A-MSDU is above a threshold or if the
* size of the MSDU is invalid. This receive buffer will contain
* all of the remainder of MSDUs in this MPDU w/o decapsulation.
*
* order
* Set if the order bit in the frame control is set. Only
* set when first_msdu is set.
*
* wifi_parser_error
* Indicates that the WiFi frame has one of the following errors
*
* overflow_err
* RXPCU Receive FIFO ran out of space to receive the full MPDU.
* Therefore this MPDU is terminated early and is thus corrupted.
*
* This MPDU will not be ACKed.
*
* RXPCU might still be able to correctly receive the following
* MPDUs in the PPDU if enough fifo space became available in time.
*
* mpdu_length_err
* Set by RXPCU if the expected MPDU length does not correspond
* with the actually received number of bytes in the MPDU.
*
* tcp_udp_chksum_fail
* Indicates that the computed checksum (tcp_udp_chksum) did
* not match the checksum in the TCP/UDP header.
*
* ip_chksum_fail
* Indicates that the computed checksum did not match the
* checksum in the IP header.
*
* sa_idx_invalid
* Indicates no matching entry was found in the address search
* table for the source MAC address.
*
* da_idx_invalid
* Indicates no matching entry was found in the address search
* table for the destination MAC address.
*
* amsdu_addr_mismatch
* Indicates that an A-MSDU with 'from DS = 0' had an SA mismatching
* TA or an A-MDU with 'to DS = 0' had a DA mismatching RA
*
* rx_in_tx_decrypt_byp
* Indicates that RX packet is not decrypted as Crypto is busy
* with TX packet processing.
*
* encrypt_required
* Indicates that this data type frame is not encrypted even if
* the policy for this MPDU requires encryption as indicated in
* the peer table key type.
*
* directed
* MPDU is a directed packet which means that the RA matched
* our STA addresses. In proxySTA it means that the TA matched
* an entry in our address search table with the corresponding
* 'no_ack' bit is the address search entry cleared.
*
* buffer_fragment
* Indicates that at least one of the rx buffers has been
* fragmented. If set the FW should look at the rx_frag_info
* descriptor described below.
*
* mpdu_length_err
* Indicates that the MPDU was pre-maturely terminated
* resulting in a truncated MPDU. Don't trust the MPDU length
* field.
*
* tkip_mic_err
* Indicates that the MPDU Michael integrity check failed
*
* decrypt_err
* Indicates that the MPDU decrypt integrity check failed
*
* fcs_err
* Indicates that the MPDU FCS check failed
*
* flow_idx_timeout
* Indicates an unsuccessful flow search due to the expiring of
* the search timer.
*
* flow_idx_invalid
* flow id is not valid.
*
* decrypt_status_code
* Field provides insight into the decryption performed. Values
* are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*.
*
* rx_bitmap_not_updated
* Frame is received, but RXPCU could not update the receive bitmap
* due to (temporary) fifo constraints.
*
* msdu_done
* If set indicates that the RX packet data, RX header data, RX
* PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
* start/end descriptors and RX Attention descriptor are all
* valid. This bit must be in the last octet of the
* descriptor.
*
*/
/* TODO: Move to compact TLV approach
* By default these tlv's are not aligned to 128b boundary
* Need to remove unused qwords and make them compact/aligned
*/
struct hal_rx_desc_qcn9274 {
struct rx_msdu_end_qcn9274 msdu_end;
struct rx_mpdu_start_qcn9274 mpdu_start;
u8 msdu_payload[];
} __packed;
#define RX_BE_PADDING0_BYTES 8
#define RX_BE_PADDING1_BYTES 8
#define HAL_RX_BE_PKT_HDR_TLV_LEN 112
struct rx_pkt_hdr_tlv {
__le64 tag;
__le64 phy_ppdu_id;
u8 rx_pkt_hdr[HAL_RX_BE_PKT_HDR_TLV_LEN];
};
struct hal_rx_desc_wcn7850 {
__le64 msdu_end_tag;
struct rx_msdu_end_qcn9274 msdu_end;
u8 rx_padding0[RX_BE_PADDING0_BYTES];
__le64 mpdu_start_tag;
struct rx_mpdu_start_qcn9274 mpdu_start;
struct rx_pkt_hdr_tlv pkt_hdr_tlv;
u8 msdu_payload[];
};
struct hal_rx_desc {
union {
struct hal_rx_desc_qcn9274 qcn9274;
struct hal_rx_desc_wcn7850 wcn7850;
} u;
} __packed;
#define MAX_USER_POS 8
#define MAX_MU_GROUP_ID 64
#define MAX_MU_GROUP_SHOW 16
#define MAX_MU_GROUP_LENGTH (6 * MAX_MU_GROUP_SHOW)
#define HAL_RX_RU_ALLOC_TYPE_MAX 6
#define RU_26 1
#define RU_52 2
#define RU_106 4
#define RU_242 9
#define RU_484 18
#define RU_996 37
#endif /* ATH12K_RX_DESC_H */