linux-zen-server/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h

967 lines
31 KiB
C
Raw Permalink Normal View History

2023-08-30 17:53:23 +02:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (C) 2012-2014, 2018-2022 Intel Corporation
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
#ifndef __iwl_fw_api_tx_h__
#define __iwl_fw_api_tx_h__
#include <linux/ieee80211.h>
/**
* enum iwl_tx_flags - bitmasks for tx_flags in TX command
* @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
* @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
* @TX_CMD_FLG_ACK: expect ACK from receiving station
* @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
* Otherwise, use rate_n_flags from the TX command
* @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
* Must set TX_CMD_FLG_ACK with this flag.
* @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
* @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
* @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
* @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
* @TX_CMD_FLG_BT_PRIO_MASK: BT priority value
* @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
* on old firmwares).
* @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
* @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
* Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
* @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
* @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
* Should be set for beacons and probe responses
* @TX_CMD_FLG_CALIB: activate PA TX power calibrations
* @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
* @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
* Should be set for 26/30 length MAC headers
* @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
* @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
* @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
* @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
* @TX_CMD_FLG_EXEC_PAPD: execute PAPD
* @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
* @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
*/
enum iwl_tx_flags {
TX_CMD_FLG_PROT_REQUIRE = BIT(0),
TX_CMD_FLG_WRITE_TX_POWER = BIT(1),
TX_CMD_FLG_ACK = BIT(3),
TX_CMD_FLG_STA_RATE = BIT(4),
TX_CMD_FLG_BAR = BIT(6),
TX_CMD_FLG_TXOP_PROT = BIT(7),
TX_CMD_FLG_VHT_NDPA = BIT(8),
TX_CMD_FLG_HT_NDPA = BIT(9),
TX_CMD_FLG_CSI_FDBK2HOST = BIT(10),
TX_CMD_FLG_BT_PRIO_POS = 11,
TX_CMD_FLG_BT_PRIO_MASK = BIT(11) | BIT(12),
TX_CMD_FLG_BT_DIS = BIT(12),
TX_CMD_FLG_SEQ_CTL = BIT(13),
TX_CMD_FLG_MORE_FRAG = BIT(14),
TX_CMD_FLG_TSF = BIT(16),
TX_CMD_FLG_CALIB = BIT(17),
TX_CMD_FLG_KEEP_SEQ_CTL = BIT(18),
TX_CMD_FLG_MH_PAD = BIT(20),
TX_CMD_FLG_RESP_TO_DRV = BIT(21),
TX_CMD_FLG_TKIP_MIC_DONE = BIT(23),
TX_CMD_FLG_DUR = BIT(25),
TX_CMD_FLG_FW_DROP = BIT(26),
TX_CMD_FLG_EXEC_PAPD = BIT(27),
TX_CMD_FLG_PAPD_TYPE = BIT(28),
TX_CMD_FLG_HCCA_CHUNK = BIT(31)
}; /* TX_FLAGS_BITS_API_S_VER_1 */
/**
* enum iwl_tx_cmd_flags - bitmasks for tx_flags in TX command for 22000
* @IWL_TX_FLAGS_CMD_RATE: use rate from the TX command
* @IWL_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs
* to a secured STA
* @IWL_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate
* selection, retry limits and BT kill
*/
enum iwl_tx_cmd_flags {
IWL_TX_FLAGS_CMD_RATE = BIT(0),
IWL_TX_FLAGS_ENCRYPT_DIS = BIT(1),
IWL_TX_FLAGS_HIGH_PRI = BIT(2),
/* Use these flags only from
* TX_FLAGS_BITS_API_S_VER_4 and above */
IWL_TX_FLAGS_RTS = BIT(3),
IWL_TX_FLAGS_CTS = BIT(4),
}; /* TX_FLAGS_BITS_API_S_VER_3 */
/**
* enum iwl_tx_pm_timeouts - pm timeout values in TX command
* @PM_FRAME_NONE: no need to suspend sleep mode
* @PM_FRAME_MGMT: fw suspend sleep mode for 100TU
* @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
*/
enum iwl_tx_pm_timeouts {
PM_FRAME_NONE = 0,
PM_FRAME_MGMT = 2,
PM_FRAME_ASSOC = 3,
};
#define TX_CMD_SEC_MSK 0x07
#define TX_CMD_SEC_WEP_KEY_IDX_POS 6
#define TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0
/**
* enum iwl_tx_cmd_sec_ctrl - bitmasks for security control in TX command
* @TX_CMD_SEC_WEP: WEP encryption algorithm.
* @TX_CMD_SEC_CCM: CCM encryption algorithm.
* @TX_CMD_SEC_TKIP: TKIP encryption algorithm.
* @TX_CMD_SEC_EXT: extended cipher algorithm.
* @TX_CMD_SEC_GCMP: GCMP encryption algorithm.
* @TX_CMD_SEC_KEY128: set for 104 bits WEP key.
* @TX_CMD_SEC_KEY_FROM_TABLE: for a non-WEP key, set if the key should be taken
* from the table instead of from the TX command.
* If the key is taken from the key table its index should be given by the
* first byte of the TX command key field.
*/
enum iwl_tx_cmd_sec_ctrl {
TX_CMD_SEC_WEP = 0x01,
TX_CMD_SEC_CCM = 0x02,
TX_CMD_SEC_TKIP = 0x03,
TX_CMD_SEC_EXT = 0x04,
TX_CMD_SEC_GCMP = 0x05,
TX_CMD_SEC_KEY128 = 0x08,
TX_CMD_SEC_KEY_FROM_TABLE = 0x10,
};
/*
* TX command Frame life time in us - to be written in pm_frame_timeout
*/
#define TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF
#define TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/
#define TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */
#define TX_CMD_LIFE_TIME_EXPIRED_FRAME 0
/*
* TID for non QoS frames - to be written in tid_tspec
*/
#define IWL_TID_NON_QOS 0
/*
* Limits on the retransmissions - to be written in {data,rts}_retry_limit
*/
#define IWL_DEFAULT_TX_RETRY 15
#define IWL_MGMT_DFAULT_RETRY_LIMIT 3
#define IWL_RTS_DFAULT_RETRY_LIMIT 60
#define IWL_BAR_DFAULT_RETRY_LIMIT 60
#define IWL_LOW_RETRY_LIMIT 7
/**
* enum iwl_tx_offload_assist_flags_pos - set %iwl_tx_cmd offload_assist values
* @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
* from mac header end. For normal case it is 4 words for SNAP.
* note: tx_cmd, mac header and pad are not counted in the offset.
* This is used to help the offload in case there is tunneling such as
* IPv6 in IPv4, in such case the ip header offset should point to the
* inner ip header and IPv4 checksum of the external header should be
* calculated by driver.
* @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum
* @TX_CMD_OFFLD_L3_EN: enable IP header checksum
* @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV
* field. Doesn't include the pad.
* @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for
* alignment
* @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU
*/
enum iwl_tx_offload_assist_flags_pos {
TX_CMD_OFFLD_IP_HDR = 0,
TX_CMD_OFFLD_L4_EN = 6,
TX_CMD_OFFLD_L3_EN = 7,
TX_CMD_OFFLD_MH_SIZE = 8,
TX_CMD_OFFLD_PAD = 13,
TX_CMD_OFFLD_AMSDU = 14,
};
#define IWL_TX_CMD_OFFLD_MH_MASK 0x1f
#define IWL_TX_CMD_OFFLD_IP_HDR_MASK 0x3f
enum iwl_tx_offload_assist_bz {
IWL_TX_CMD_OFFLD_BZ_RESULT_OFFS = 0x000003ff,
IWL_TX_CMD_OFFLD_BZ_START_OFFS = 0x001ff800,
IWL_TX_CMD_OFFLD_BZ_MH_LEN = 0x07c00000,
IWL_TX_CMD_OFFLD_BZ_MH_PAD = 0x08000000,
IWL_TX_CMD_OFFLD_BZ_AMSDU = 0x10000000,
IWL_TX_CMD_OFFLD_BZ_ZERO2ONES = 0x20000000,
IWL_TX_CMD_OFFLD_BZ_ENABLE_CSUM = 0x40000000,
IWL_TX_CMD_OFFLD_BZ_PARTIAL_CSUM = 0x80000000,
};
/* TODO: complete documentation for try_cnt and btkill_cnt */
/**
* struct iwl_tx_cmd - TX command struct to FW
* ( TX_CMD = 0x1c )
* @len: in bytes of the payload, see below for details
* @offload_assist: TX offload configuration
* @tx_flags: combination of TX_CMD_FLG_*, see &enum iwl_tx_flags
* @scratch: scratch buffer used by the device
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
* @initial_rate_index: index into the the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @reserved2: reserved
* @key: security key
* @reserved3: reserved
* @life_time: frame life time (usecs??)
* @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
* btkill_cnd + reserved), first 32 bits. "0" disables usage.
* @dram_msb_ptr: upper bits of the scratch physical address
* @rts_retry_limit: max attempts for RTS
* @data_retry_limit: max attempts to send the data packet
* @tid_tspec: TID/tspec
* @pm_frame_timeout: PM TX frame timeout
* @reserved4: reserved
* @payload: payload (same as @hdr)
* @hdr: 802.11 header (same as @payload)
*
* The byte count (both len and next_frame_len) includes MAC header
* (24/26/30/32 bytes)
* + 2 bytes pad if 26/30 header size
* + 8 byte IV for CCM or TKIP (not used for WEP)
* + Data payload
* + 8-byte MIC (not used for CCM/WEP)
* It does not include post-MAC padding, i.e.,
* MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
* Range of len: 14-2342 bytes.
*
* After the struct fields the MAC header is placed, plus any padding,
* and then the actial payload.
*/
struct iwl_tx_cmd {
__le16 len;
__le16 offload_assist;
__le32 tx_flags;
struct {
u8 try_cnt;
u8 btkill_cnt;
__le16 reserved;
} scratch; /* DRAM_SCRATCH_API_U_VER_1 */
__le32 rate_n_flags;
u8 sta_id;
u8 sec_ctl;
u8 initial_rate_index;
u8 reserved2;
u8 key[16];
__le32 reserved3;
__le32 life_time;
__le32 dram_lsb_ptr;
u8 dram_msb_ptr;
u8 rts_retry_limit;
u8 data_retry_limit;
u8 tid_tspec;
__le16 pm_frame_timeout;
__le16 reserved4;
union {
DECLARE_FLEX_ARRAY(u8, payload);
DECLARE_FLEX_ARRAY(struct ieee80211_hdr, hdr);
};
} __packed; /* TX_CMD_API_S_VER_6 */
struct iwl_dram_sec_info {
__le32 pn_low;
__le16 pn_high;
__le16 aux_info;
} __packed; /* DRAM_SEC_INFO_API_S_VER_1 */
/**
* struct iwl_tx_cmd_gen2 - TX command struct to FW for 22000 devices
* ( TX_CMD = 0x1c )
* @len: in bytes of the payload, see below for details
* @offload_assist: TX offload configuration
* @flags: combination of &enum iwl_tx_cmd_flags
* @dram_info: FW internal DRAM storage
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
* @hdr: 802.11 header
*/
struct iwl_tx_cmd_gen2 {
__le16 len;
__le16 offload_assist;
__le32 flags;
struct iwl_dram_sec_info dram_info;
__le32 rate_n_flags;
struct ieee80211_hdr hdr[];
} __packed; /* TX_CMD_API_S_VER_7,
TX_CMD_API_S_VER_9 */
/**
* struct iwl_tx_cmd_gen3 - TX command struct to FW for AX210+ devices
* ( TX_CMD = 0x1c )
* @len: in bytes of the payload, see below for details
* @flags: combination of &enum iwl_tx_cmd_flags
* @offload_assist: TX offload configuration
* @dram_info: FW internal DRAM storage
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
* @reserved: reserved
* @hdr: 802.11 header
*/
struct iwl_tx_cmd_gen3 {
__le16 len;
__le16 flags;
__le32 offload_assist;
struct iwl_dram_sec_info dram_info;
__le32 rate_n_flags;
u8 reserved[8];
struct ieee80211_hdr hdr[];
} __packed; /* TX_CMD_API_S_VER_8,
TX_CMD_API_S_VER_10 */
/*
* TX response related data
*/
/*
* enum iwl_tx_status - status that is returned by the fw after attempts to Tx
* @TX_STATUS_SUCCESS:
* @TX_STATUS_DIRECT_DONE:
* @TX_STATUS_POSTPONE_DELAY:
* @TX_STATUS_POSTPONE_FEW_BYTES:
* @TX_STATUS_POSTPONE_BT_PRIO:
* @TX_STATUS_POSTPONE_QUIET_PERIOD:
* @TX_STATUS_POSTPONE_CALC_TTAK:
* @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
* @TX_STATUS_FAIL_SHORT_LIMIT:
* @TX_STATUS_FAIL_LONG_LIMIT:
* @TX_STATUS_FAIL_UNDERRUN:
* @TX_STATUS_FAIL_DRAIN_FLOW:
* @TX_STATUS_FAIL_RFKILL_FLUSH:
* @TX_STATUS_FAIL_LIFE_EXPIRE:
* @TX_STATUS_FAIL_DEST_PS:
* @TX_STATUS_FAIL_HOST_ABORTED:
* @TX_STATUS_FAIL_BT_RETRY:
* @TX_STATUS_FAIL_STA_INVALID:
* @TX_TATUS_FAIL_FRAG_DROPPED:
* @TX_STATUS_FAIL_TID_DISABLE:
* @TX_STATUS_FAIL_FIFO_FLUSHED:
* @TX_STATUS_FAIL_SMALL_CF_POLL:
* @TX_STATUS_FAIL_FW_DROP:
* @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
* STA table
* @TX_FRAME_STATUS_INTERNAL_ABORT:
* @TX_MODE_MSK:
* @TX_MODE_NO_BURST:
* @TX_MODE_IN_BURST_SEQ:
* @TX_MODE_FIRST_IN_BURST:
* @TX_QUEUE_NUM_MSK:
*
* Valid only if frame_count =1
* TODO: complete documentation
*/
enum iwl_tx_status {
TX_STATUS_MSK = 0x000000ff,
TX_STATUS_SUCCESS = 0x01,
TX_STATUS_DIRECT_DONE = 0x02,
/* postpone TX */
TX_STATUS_POSTPONE_DELAY = 0x40,
TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
TX_STATUS_POSTPONE_BT_PRIO = 0x42,
TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
/* abort TX */
TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
TX_STATUS_FAIL_LONG_LIMIT = 0x83,
TX_STATUS_FAIL_UNDERRUN = 0x84,
TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
TX_STATUS_FAIL_DEST_PS = 0x88,
TX_STATUS_FAIL_HOST_ABORTED = 0x89,
TX_STATUS_FAIL_BT_RETRY = 0x8a,
TX_STATUS_FAIL_STA_INVALID = 0x8b,
TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
TX_STATUS_FAIL_TID_DISABLE = 0x8d,
TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
TX_STATUS_FAIL_FW_DROP = 0x90,
TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
TX_STATUS_INTERNAL_ABORT = 0x92,
TX_MODE_MSK = 0x00000f00,
TX_MODE_NO_BURST = 0x00000000,
TX_MODE_IN_BURST_SEQ = 0x00000100,
TX_MODE_FIRST_IN_BURST = 0x00000200,
TX_QUEUE_NUM_MSK = 0x0001f000,
TX_NARROW_BW_MSK = 0x00060000,
TX_NARROW_BW_1DIV2 = 0x00020000,
TX_NARROW_BW_1DIV4 = 0x00040000,
TX_NARROW_BW_1DIV8 = 0x00060000,
};
/*
* enum iwl_tx_agg_status - TX aggregation status
* @AGG_TX_STATE_STATUS_MSK:
* @AGG_TX_STATE_TRANSMITTED:
* @AGG_TX_STATE_UNDERRUN:
* @AGG_TX_STATE_BT_PRIO:
* @AGG_TX_STATE_FEW_BYTES:
* @AGG_TX_STATE_ABORT:
* @AGG_TX_STATE_TX_ON_AIR_DROP: TX_ON_AIR signal drop without underrun or
* BT detection
* @AGG_TX_STATE_LAST_SENT_TRY_CNT:
* @AGG_TX_STATE_LAST_SENT_BT_KILL:
* @AGG_TX_STATE_SCD_QUERY:
* @AGG_TX_STATE_TEST_BAD_CRC32:
* @AGG_TX_STATE_RESPONSE:
* @AGG_TX_STATE_DUMP_TX:
* @AGG_TX_STATE_DELAY_TX:
* @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
* occur if tx failed for this frame when it was a member of a previous
* aggregation block). If rate scaling is used, retry count indicates the
* rate table entry used for all frames in the new agg.
* @AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
* this frame
*
* TODO: complete documentation
*/
enum iwl_tx_agg_status {
AGG_TX_STATE_STATUS_MSK = 0x00fff,
AGG_TX_STATE_TRANSMITTED = 0x000,
AGG_TX_STATE_UNDERRUN = 0x001,
AGG_TX_STATE_BT_PRIO = 0x002,
AGG_TX_STATE_FEW_BYTES = 0x004,
AGG_TX_STATE_ABORT = 0x008,
AGG_TX_STATE_TX_ON_AIR_DROP = 0x010,
AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
AGG_TX_STATE_SCD_QUERY = 0x080,
AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
AGG_TX_STATE_RESPONSE = 0x1ff,
AGG_TX_STATE_DUMP_TX = 0x200,
AGG_TX_STATE_DELAY_TX = 0x400,
AGG_TX_STATE_TRY_CNT_POS = 12,
AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
};
/*
* The mask below describes a status where we are absolutely sure that the MPDU
* wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
* written the bytes to the TXE, but we know nothing about what the DSP did.
*/
#define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
AGG_TX_STATE_ABORT | \
AGG_TX_STATE_SCD_QUERY)
/*
* REPLY_TX = 0x1c (response)
*
* This response may be in one of two slightly different formats, indicated
* by the frame_count field:
*
* 1) No aggregation (frame_count == 1). This reports Tx results for a single
* frame. Multiple attempts, at various bit rates, may have been made for
* this frame.
*
* 2) Aggregation (frame_count > 1). This reports Tx results for two or more
* frames that used block-acknowledge. All frames were transmitted at
* same rate. Rate scaling may have been used if first frame in this new
* agg block failed in previous agg block(s).
*
* Note that, for aggregation, ACK (block-ack) status is not delivered
* here; block-ack has not been received by the time the device records
* this status.
* This status relates to reasons the tx might have been blocked or aborted
* within the device, rather than whether it was received successfully by
* the destination station.
*/
/**
* struct agg_tx_status - per packet TX aggregation status
* @status: See &enum iwl_tx_agg_status
* @sequence: Sequence # for this frame's Tx cmd (not SSN!)
*/
struct agg_tx_status {
__le16 status;
__le16 sequence;
} __packed;
/*
* definitions for initial rate index field
* bits [3:0] initial rate index
* bits [6:4] rate table color, used for the initial rate
* bit-7 invalid rate indication
*/
#define TX_RES_INIT_RATE_INDEX_MSK 0x0f
#define TX_RES_RATE_TABLE_COLOR_POS 4
#define TX_RES_RATE_TABLE_COLOR_MSK 0x70
#define TX_RES_INV_RATE_INDEX_MSK 0x80
#define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\
TX_RES_RATE_TABLE_COLOR_POS)
#define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
#define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
/**
* struct iwl_mvm_tx_resp_v3 - notifies that fw is TXing a packet
* ( REPLY_TX = 0x1c )
* @frame_count: 1 no aggregation, >1 aggregation
* @bt_kill_count: num of times blocked by bluetooth (unused for agg)
* @failure_rts: num of failures due to unsuccessful RTS
* @failure_frame: num failures due to no ACK (unused for agg)
* @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
* Tx of all the batch. RATE_MCS_*
* @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
* for agg: RTS + CTS + aggregation tx time + block-ack time.
* in usec.
* @pa_status: tx power info
* @pa_integ_res_a: tx power info
* @pa_integ_res_b: tx power info
* @pa_integ_res_c: tx power info
* @measurement_req_id: tx power info
* @reduced_tpc: transmit power reduction used
* @reserved: reserved
* @tfd_info: TFD information set by the FH
* @seq_ctl: sequence control from the Tx cmd
* @byte_cnt: byte count from the Tx cmd
* @tlc_info: TLC rate info
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
* @frame_ctrl: frame control
* @status: for non-agg: frame status TX_STATUS_*
* for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
* follow this one, up to frame_count. Length in @frame_count.
*
* After the array of statuses comes the SSN of the SCD. Look at
* %iwl_mvm_get_scd_ssn for more details.
*/
struct iwl_mvm_tx_resp_v3 {
u8 frame_count;
u8 bt_kill_count;
u8 failure_rts;
u8 failure_frame;
__le32 initial_rate;
__le16 wireless_media_time;
u8 pa_status;
u8 pa_integ_res_a[3];
u8 pa_integ_res_b[3];
u8 pa_integ_res_c[3];
__le16 measurement_req_id;
u8 reduced_tpc;
u8 reserved;
__le32 tfd_info;
__le16 seq_ctl;
__le16 byte_cnt;
u8 tlc_info;
u8 ra_tid;
__le16 frame_ctrl;
struct agg_tx_status status[];
} __packed; /* TX_RSP_API_S_VER_3 */
/**
* struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
* ( REPLY_TX = 0x1c )
* @frame_count: 1 no aggregation, >1 aggregation
* @bt_kill_count: num of times blocked by bluetooth (unused for agg)
* @failure_rts: num of failures due to unsuccessful RTS
* @failure_frame: num failures due to no ACK (unused for agg)
* @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
* Tx of all the batch. RATE_MCS_*
* @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
* for agg: RTS + CTS + aggregation tx time + block-ack time.
* in usec.
* @pa_status: tx power info
* @pa_integ_res_a: tx power info
* @pa_integ_res_b: tx power info
* @pa_integ_res_c: tx power info
* @measurement_req_id: tx power info
* @reduced_tpc: transmit power reduction used
* @reserved: reserved
* @tfd_info: TFD information set by the FH
* @seq_ctl: sequence control from the Tx cmd
* @byte_cnt: byte count from the Tx cmd
* @tlc_info: TLC rate info
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
* @frame_ctrl: frame control
* @tx_queue: TX queue for this response
* @reserved2: reserved for padding/alignment
* @status: for non-agg: frame status TX_STATUS_*
* For version 6 TX response isn't received for aggregation at all.
*
* After the array of statuses comes the SSN of the SCD. Look at
* %iwl_mvm_get_scd_ssn for more details.
*/
struct iwl_mvm_tx_resp {
u8 frame_count;
u8 bt_kill_count;
u8 failure_rts;
u8 failure_frame;
__le32 initial_rate;
__le16 wireless_media_time;
u8 pa_status;
u8 pa_integ_res_a[3];
u8 pa_integ_res_b[3];
u8 pa_integ_res_c[3];
__le16 measurement_req_id;
u8 reduced_tpc;
u8 reserved;
__le32 tfd_info;
__le16 seq_ctl;
__le16 byte_cnt;
u8 tlc_info;
u8 ra_tid;
__le16 frame_ctrl;
__le16 tx_queue;
__le16 reserved2;
struct agg_tx_status status;
} __packed; /* TX_RSP_API_S_VER_6,
TX_RSP_API_S_VER_7 */
/**
* struct iwl_mvm_ba_notif - notifies about reception of BA
* ( BA_NOTIF = 0xc5 )
* @sta_addr: MAC address
* @reserved: reserved
* @sta_id: Index of recipient (BA-sending) station in fw's station table
* @tid: tid of the session
* @seq_ctl: sequence control field
* @bitmap: the bitmap of the BA notification as seen in the air
* @scd_flow: the tx queue this BA relates to
* @scd_ssn: the index of the last contiguously sent packet
* @txed: number of Txed frames in this batch
* @txed_2_done: number of Acked frames in this batch
* @reduced_txp: power reduced according to TPC. This is the actual value and
* not a copy from the LQ command. Thus, if not the first rate was used
* for Tx-ing then this value will be set to 0 by FW.
* @reserved1: reserved
*/
struct iwl_mvm_ba_notif {
u8 sta_addr[ETH_ALEN];
__le16 reserved;
u8 sta_id;
u8 tid;
__le16 seq_ctl;
__le64 bitmap;
__le16 scd_flow;
__le16 scd_ssn;
u8 txed;
u8 txed_2_done;
u8 reduced_txp;
u8 reserved1;
} __packed;
/**
* struct iwl_mvm_compressed_ba_tfd - progress of a TFD queue
* @q_num: TFD queue number
* @tfd_index: Index of first un-acked frame in the TFD queue
* @scd_queue: For debug only - the physical queue the TFD queue is bound to
* @tid: TID of the queue (0-7)
* @reserved: reserved for alignment
*/
struct iwl_mvm_compressed_ba_tfd {
__le16 q_num;
__le16 tfd_index;
u8 scd_queue;
u8 tid;
u8 reserved[2];
} __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
/**
* struct iwl_mvm_compressed_ba_ratid - progress of a RA TID queue
* @q_num: RA TID queue number
* @tid: TID of the queue
* @ssn: BA window current SSN
*/
struct iwl_mvm_compressed_ba_ratid {
u8 q_num;
u8 tid;
__le16 ssn;
} __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */
/*
* enum iwl_mvm_ba_resp_flags - TX aggregation status
* @IWL_MVM_BA_RESP_TX_AGG: generated due to BA
* @IWL_MVM_BA_RESP_TX_BAR: generated due to BA after BAR
* @IWL_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA
* @IWL_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun
* @IWL_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill
* @IWL_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the
* expected time
*/
enum iwl_mvm_ba_resp_flags {
IWL_MVM_BA_RESP_TX_AGG,
IWL_MVM_BA_RESP_TX_BAR,
IWL_MVM_BA_RESP_TX_AGG_FAIL,
IWL_MVM_BA_RESP_TX_UNDERRUN,
IWL_MVM_BA_RESP_TX_BT_KILL,
IWL_MVM_BA_RESP_TX_DSP_TIMEOUT
};
/**
* struct iwl_mvm_compressed_ba_notif - notifies about reception of BA
* ( BA_NOTIF = 0xc5 )
* @flags: status flag, see the &iwl_mvm_ba_resp_flags
* @sta_id: Index of recipient (BA-sending) station in fw's station table
* @reduced_txp: power reduced according to TPC. This is the actual value and
* not a copy from the LQ command. Thus, if not the first rate was used
* for Tx-ing then this value will be set to 0 by FW.
* @tlc_rate_info: TLC rate info, initial rate index, TLC table color
* @retry_cnt: retry count
* @query_byte_cnt: SCD query byte count
* @query_frame_cnt: SCD query frame count
* @txed: number of frames sent in the aggregation (all-TIDs)
* @done: number of frames that were Acked by the BA (all-TIDs)
* @reserved: reserved (for alignment)
* @wireless_time: Wireless-media time
* @tx_rate: the rate the aggregation was sent at
* @tfd_cnt: number of TFD-Q elements
* @ra_tid_cnt: number of RATID-Q elements
* @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
* for details. Length in @tfd_cnt.
* @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
* &iwl_mvm_compressed_ba_ratid for more details. Length in @ra_tid_cnt.
*/
struct iwl_mvm_compressed_ba_notif {
__le32 flags;
u8 sta_id;
u8 reduced_txp;
u8 tlc_rate_info;
u8 retry_cnt;
__le32 query_byte_cnt;
__le16 query_frame_cnt;
__le16 txed;
__le16 done;
__le16 reserved;
__le32 wireless_time;
__le32 tx_rate;
__le16 tfd_cnt;
__le16 ra_tid_cnt;
union {
DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_ratid, ra_tid);
DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_tfd, tfd);
};
} __packed; /* COMPRESSED_BA_RES_API_S_VER_4,
COMPRESSED_BA_RES_API_S_VER_5 */
/**
* struct iwl_mac_beacon_cmd_v6 - beacon template command
* @tx: the tx commands associated with the beacon frame
* @template_id: currently equal to the mac context id of the coresponding
* mac.
* @tim_idx: the offset of the tim IE in the beacon
* @tim_size: the length of the tim IE
* @frame: the template of the beacon frame
*/
struct iwl_mac_beacon_cmd_v6 {
struct iwl_tx_cmd tx;
__le32 template_id;
__le32 tim_idx;
__le32 tim_size;
struct ieee80211_hdr frame[];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_6 */
/**
* struct iwl_mac_beacon_cmd_v7 - beacon template command with offloaded CSA
* @tx: the tx commands associated with the beacon frame
* @template_id: currently equal to the mac context id of the coresponding
* mac.
* @tim_idx: the offset of the tim IE in the beacon
* @tim_size: the length of the tim IE
* @ecsa_offset: offset to the ECSA IE if present
* @csa_offset: offset to the CSA IE if present
* @frame: the template of the beacon frame
*/
struct iwl_mac_beacon_cmd_v7 {
struct iwl_tx_cmd tx;
__le32 template_id;
__le32 tim_idx;
__le32 tim_size;
__le32 ecsa_offset;
__le32 csa_offset;
struct ieee80211_hdr frame[];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_7 */
/* Bit flags for BEACON_TEMPLATE_CMD_API until version 10 */
enum iwl_mac_beacon_flags_v1 {
IWL_MAC_BEACON_CCK_V1 = BIT(8),
IWL_MAC_BEACON_ANT_A_V1 = BIT(9),
IWL_MAC_BEACON_ANT_B_V1 = BIT(10),
IWL_MAC_BEACON_FILS_V1 = BIT(12),
};
/* Bit flags for BEACON_TEMPLATE_CMD_API version 11 and above */
enum iwl_mac_beacon_flags {
IWL_MAC_BEACON_CCK = BIT(5),
IWL_MAC_BEACON_ANT_A = BIT(6),
IWL_MAC_BEACON_ANT_B = BIT(7),
IWL_MAC_BEACON_FILS = BIT(8),
};
/**
* struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
* @byte_cnt: byte count of the beacon frame.
* @flags: least significant byte for rate code. The most significant byte
* is &enum iwl_mac_beacon_flags.
* @short_ssid: Short SSID
* @reserved: reserved
* @template_id: currently equal to the mac context id of the coresponding mac.
* @tim_idx: the offset of the tim IE in the beacon
* @tim_size: the length of the tim IE
* @ecsa_offset: offset to the ECSA IE if present
* @csa_offset: offset to the CSA IE if present
* @frame: the template of the beacon frame
*/
struct iwl_mac_beacon_cmd {
__le16 byte_cnt;
__le16 flags;
__le32 short_ssid;
__le32 reserved;
__le32 template_id;
__le32 tim_idx;
__le32 tim_size;
__le32 ecsa_offset;
__le32 csa_offset;
struct ieee80211_hdr frame[];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_10,
BEACON_TEMPLATE_CMD_API_S_VER_11,
BEACON_TEMPLATE_CMD_API_S_VER_12 */
struct iwl_beacon_notif {
struct iwl_mvm_tx_resp beacon_notify_hdr;
__le64 tsf;
__le32 ibss_mgr_status;
} __packed;
/**
* struct iwl_extended_beacon_notif_v5 - notifies about beacon transmission
* @beacon_notify_hdr: tx response command associated with the beacon
* @tsf: last beacon tsf
* @ibss_mgr_status: whether IBSS is manager
* @gp2: last beacon time in gp2
*/
struct iwl_extended_beacon_notif_v5 {
struct iwl_mvm_tx_resp beacon_notify_hdr;
__le64 tsf;
__le32 ibss_mgr_status;
__le32 gp2;
} __packed; /* BEACON_NTFY_API_S_VER_5 */
/**
* struct iwl_extended_beacon_notif - notifies about beacon transmission
* @status: the status of the Tx response of the beacon
* @tsf: last beacon tsf
* @ibss_mgr_status: whether IBSS is manager
* @gp2: last beacon time in gp2
*/
struct iwl_extended_beacon_notif {
__le32 status;
__le64 tsf;
__le32 ibss_mgr_status;
__le32 gp2;
} __packed; /* BEACON_NTFY_API_S_VER_6_ */
/**
* enum iwl_dump_control - dump (flush) control flags
* @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
DUMP_TX_FIFO_FLUSH = BIT(1),
};
/**
* struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
* @queues_ctl: bitmap of queues to flush
* @flush_ctl: control flags
* @reserved: reserved
*/
struct iwl_tx_path_flush_cmd_v1 {
__le32 queues_ctl;
__le16 flush_ctl;
__le16 reserved;
} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
/**
* struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
* @sta_id: station ID to flush
* @tid_mask: TID mask to flush
* @reserved: reserved
*/
struct iwl_tx_path_flush_cmd {
__le32 sta_id;
__le16 tid_mask;
__le16 reserved;
} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */
#define IWL_TX_FLUSH_QUEUE_RSP 16
/**
* struct iwl_flush_queue_info - virtual flush queue info
* @queue_num: virtual queue id
* @read_before_flush: read pointer before flush
* @read_after_flush: read pointer after flush
*/
struct iwl_flush_queue_info {
__le16 tid;
__le16 queue_num;
__le16 read_before_flush;
__le16 read_after_flush;
} __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */
/**
* struct iwl_tx_path_flush_cmd_rsp -- queue/FIFO flush command response
* @num_flushed_queues: number of queues in queues array
* @queues: all flushed queues
*/
struct iwl_tx_path_flush_cmd_rsp {
__le16 sta_id;
__le16 num_flushed_queues;
struct iwl_flush_queue_info queues[IWL_TX_FLUSH_QUEUE_RSP];
} __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */
/* Available options for the SCD_QUEUE_CFG HCMD */
enum iwl_scd_cfg_actions {
SCD_CFG_DISABLE_QUEUE = 0x0,
SCD_CFG_ENABLE_QUEUE = 0x1,
SCD_CFG_UPDATE_QUEUE_TID = 0x2,
};
/**
* struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
* @token: unused
* @sta_id: station id
* @tid: TID
* @scd_queue: scheduler queue to confiug
* @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
* Value is one of &enum iwl_scd_cfg_actions options
* @aggregate: 1 aggregated queue, 0 otherwise
* @tx_fifo: &enum iwl_mvm_tx_fifo
* @window: BA window size
* @ssn: SSN for the BA agreement
* @reserved: reserved
*/
struct iwl_scd_txq_cfg_cmd {
u8 token;
u8 sta_id;
u8 tid;
u8 scd_queue;
u8 action;
u8 aggregate;
u8 tx_fifo;
u8 window;
__le16 ssn;
__le16 reserved;
} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
/**
* struct iwl_scd_txq_cfg_rsp
* @token: taken from the command
* @sta_id: station id from the command
* @tid: tid from the command
* @scd_queue: scd_queue from the command
*/
struct iwl_scd_txq_cfg_rsp {
u8 token;
u8 sta_id;
u8 tid;
u8 scd_queue;
} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
#endif /* __iwl_fw_api_tx_h__ */