linux-zen-server/drivers/net/wwan/iosm/iosm_ipc_mux.h

447 lines
14 KiB
C
Raw Permalink Normal View History

2023-08-30 17:53:23 +02:00
/* SPDX-License-Identifier: GPL-2.0-only
*
* Copyright (C) 2020-21 Intel Corporation.
*/
#ifndef IOSM_IPC_MUX_H
#define IOSM_IPC_MUX_H
#include "iosm_ipc_protocol.h"
#define IPC_MEM_MAX_UL_DG_ENTRIES 100
#define IPC_MEM_MAX_TDS_MUX_AGGR_UL 60
#define IPC_MEM_MAX_TDS_MUX_AGGR_DL 60
#define IPC_MEM_MAX_ADB_BUF_SIZE (16 * 1024)
#define IPC_MEM_MAX_UL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE
#define IPC_MEM_MAX_DL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE
/* Size of the buffer for the IP MUX Lite data buffer. */
#define IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE (2 * 1024)
/* TD counts for IP MUX Lite */
#define IPC_MEM_MAX_TDS_MUX_LITE_UL 800
#define IPC_MEM_MAX_TDS_MUX_LITE_DL 1200
/* open session request (AP->CP) */
#define MUX_CMD_OPEN_SESSION 1
/* response to open session request (CP->AP) */
#define MUX_CMD_OPEN_SESSION_RESP 2
/* close session request (AP->CP) */
#define MUX_CMD_CLOSE_SESSION 3
/* response to close session request (CP->AP) */
#define MUX_CMD_CLOSE_SESSION_RESP 4
/* Flow control command with mask of the flow per queue/flow. */
#define MUX_LITE_CMD_FLOW_CTL 5
/* ACK the flow control command. Shall have the same Transaction ID as the
* matching FLOW_CTL command.
*/
#define MUX_LITE_CMD_FLOW_CTL_ACK 6
/* Command for report packet indicating link quality metrics. */
#define MUX_LITE_CMD_LINK_STATUS_REPORT 7
/* Response to a report packet */
#define MUX_LITE_CMD_LINK_STATUS_REPORT_RESP 8
/* Used to reset a command/response state. */
#define MUX_CMD_INVALID 255
/* command response : command processed successfully */
#define MUX_CMD_RESP_SUCCESS 0
/* MUX for route link devices */
#define IPC_MEM_WWAN_MUX BIT(0)
/* Initiated actions to change the state of the MUX object. */
enum mux_event {
MUX_E_INACTIVE, /* No initiated actions. */
MUX_E_MUX_SESSION_OPEN, /* Create the MUX channel and a session. */
MUX_E_MUX_SESSION_CLOSE, /* Release a session. */
MUX_E_MUX_CHANNEL_CLOSE, /* Release the MUX channel. */
MUX_E_NO_ORDERS, /* No MUX order. */
MUX_E_NOT_APPLICABLE, /* Defect IP MUX. */
};
/* MUX session open command. */
struct mux_session_open {
enum mux_event event;
__le32 if_id;
};
/* MUX session close command. */
struct mux_session_close {
enum mux_event event;
__le32 if_id;
};
/* MUX channel close command. */
struct mux_channel_close {
enum mux_event event;
};
/* Default message type to find out the right message type. */
struct mux_common {
enum mux_event event;
};
/* List of ops in MUX mode. */
union mux_msg {
struct mux_session_open session_open;
struct mux_session_close session_close;
struct mux_channel_close channel_close;
struct mux_common common;
};
/* Parameter definition of the open session command. */
struct mux_cmd_open_session {
u8 flow_ctrl; /* 0: Flow control disabled (flow allowed). */
/* 1: Flow control enabled (flow not allowed)*/
u8 ipv4v6_hints; /* 0: IPv4/IPv6 hints not supported.*/
/* 1: IPv4/IPv6 hints supported*/
__le16 reserved2; /* Reserved. Set to zero. */
__le32 dl_head_pad_len; /* Maximum length supported */
/* for DL head padding on a datagram. */
};
/* Parameter definition of the open session response. */
struct mux_cmd_open_session_resp {
__le32 response; /* Response code */
u8 flow_ctrl; /* 0: Flow control disabled (flow allowed). */
/* 1: Flow control enabled (flow not allowed) */
u8 ipv4v6_hints; /* 0: IPv4/IPv6 hints not supported */
/* 1: IPv4/IPv6 hints supported */
__le16 reserved2; /* Reserved. Set to zero. */
__le32 ul_head_pad_len; /* Actual length supported for */
/* UL head padding on adatagram.*/
};
/* Parameter definition of the close session response code */
struct mux_cmd_close_session_resp {
__le32 response;
};
/* Parameter definition of the flow control command. */
struct mux_cmd_flow_ctl {
__le32 mask; /* indicating the desired flow control */
/* state for various flows/queues */
};
/* Parameter definition of the link status report code*/
struct mux_cmd_link_status_report {
u8 payload;
};
/* Parameter definition of the link status report response code. */
struct mux_cmd_link_status_report_resp {
__le32 response;
};
/**
* union mux_cmd_param - Union-definition of the command parameters.
* @open_session: Inband command for open session
* @open_session_resp: Inband command for open session response
* @close_session_resp: Inband command for close session response
* @flow_ctl: In-band flow control on the opened interfaces
* @link_status: In-band Link Status Report
* @link_status_resp: In-band command for link status report response
*/
union mux_cmd_param {
struct mux_cmd_open_session open_session;
struct mux_cmd_open_session_resp open_session_resp;
struct mux_cmd_close_session_resp close_session_resp;
struct mux_cmd_flow_ctl flow_ctl;
struct mux_cmd_link_status_report link_status;
struct mux_cmd_link_status_report_resp link_status_resp;
};
/* States of the MUX object.. */
enum mux_state {
MUX_S_INACTIVE, /* IP MUX is unused. */
MUX_S_ACTIVE, /* IP MUX channel is available. */
MUX_S_ERROR, /* Defect IP MUX. */
};
/* Supported MUX protocols. */
enum ipc_mux_protocol {
MUX_UNKNOWN,
MUX_LITE,
MUX_AGGREGATION,
};
/* Supported UL data transfer methods. */
enum ipc_mux_ul_flow {
MUX_UL_UNKNOWN,
MUX_UL, /* Normal UL data transfer */
MUX_UL_ON_CREDITS, /* UL data transfer will be based on credits */
};
/* List of the MUX session. */
struct mux_session {
struct iosm_wwan *wwan; /*Network i/f used for communication*/
int if_id; /* i/f id for session open message.*/
u32 flags;
u32 ul_head_pad_len; /* Nr of bytes for UL head padding. */
u32 dl_head_pad_len; /* Nr of bytes for DL head padding. */
struct sk_buff_head ul_list; /* skb entries for an ADT. */
u32 flow_ctl_mask; /* UL flow control */
u32 flow_ctl_en_cnt; /* Flow control Enable cmd count */
u32 flow_ctl_dis_cnt; /* Flow Control Disable cmd count */
int ul_flow_credits; /* UL flow credits */
u8 net_tx_stop:1,
flush:1; /* flush net interface ? */
};
/**
* struct mux_adth_dg - Structure of the datagram in the Aggregated Datagram
* Table Header.
* @datagram_index : Index (in bytes) to the k-th datagram in the table.
* Index shall count from the start of the block including
* the 16-byte header. This value shall be non-zero.
* @datagram_length: Length of the k-th datagram including the head padding.
* This value shall be non-zero.
* @service_class: Service class identifier for the datagram.
* @reserved: Reserved bytes. Set to zero
*/
struct mux_adth_dg {
__le32 datagram_index;
__le16 datagram_length;
u8 service_class;
u8 reserved;
};
/**
* struct mux_qlth_ql - Structure of the queue level in the Aggregated
* Datagram Queue Level Table Header.
* @nr_of_bytes: Number of bytes available to transmit in the queue.
*/
struct mux_qlth_ql {
__le32 nr_of_bytes;
};
/**
* struct mux_qlth - Structure of Aggregated Datagram Queue Level Table
* Header.
* @signature: Signature of the Queue Level Table Header
* Value: 0x48544C51 (ASCII characters: 'Q' 'L' 'T' 'H')
* @table_length: Length (in bytes) of the datagram table. This length
* shall include the queue level table header size.
* Minimum value:0x10
* @if_id: ID of the interface the queue levels in the table
* belong to.
* @reserved: Reserved byte. Set to zero.
* @next_table_index: Index (in bytes) to the next table in the buffer. Index
* shall count from the start of the block including the
* 16-byte header. Value of zero indicates end of the list.
* @reserved2: Reserved bytes. Set to zero
* @ql: Queue level table with variable length
*/
struct mux_qlth {
__le32 signature;
__le16 table_length;
u8 if_id;
u8 reserved;
__le32 next_table_index;
__le32 reserved2;
struct mux_qlth_ql ql;
};
/**
* struct mux_adb - Structure of State of a single UL data block.
* @dest_skb: Current UL skb for the data block.
* @buf: ADB memory
* @adgh: ADGH pointer
* @qlth_skb: QLTH pointer
* @next_table_index: Pointer to next table index.
* @free_list: List of alloc. ADB for the UL sess.
* @size: Size of the ADB memory.
* @if_cnt: Statistic counter
* @dg_cnt_total: Datagram count total
* @payload_size: Payload Size
* @dg: Datagram table.
* @pp_qlt: Pointers to hold Queue Level Tables of session
* @adbh: ADBH pointer
* @qlt_updated: Queue level table updated
* @dg_count: Datagram count
*/
struct mux_adb {
struct sk_buff *dest_skb;
u8 *buf;
struct mux_adgh *adgh;
struct sk_buff *qlth_skb;
u32 *next_table_index;
struct sk_buff_head free_list;
int size;
u32 if_cnt;
u32 dg_cnt_total;
u32 payload_size;
struct mux_adth_dg
dg[IPC_MEM_MUX_IP_SESSION_ENTRIES][IPC_MEM_MAX_UL_DG_ENTRIES];
struct mux_qlth *pp_qlt[IPC_MEM_MUX_IP_SESSION_ENTRIES];
struct mux_adbh *adbh;
u32 qlt_updated[IPC_MEM_MUX_IP_SESSION_ENTRIES];
u32 dg_count[IPC_MEM_MUX_IP_SESSION_ENTRIES];
};
/**
* struct mux_acb - Structure of Temporary ACB state.
* @skb: Used UL skb.
* @if_id: Session id.
* @buf_p: Command buffer.
* @wanted_response: Wanted Response
* @got_response: Got response
* @cmd: command
* @got_param: Received command/response parameter
*/
struct mux_acb {
struct sk_buff *skb; /* Used UL skb. */
int if_id; /* Session id. */
u8 *buf_p;
u32 wanted_response;
u32 got_response;
u32 cmd;
union mux_cmd_param got_param; /* Received command/response parameter */
};
/**
* struct iosm_mux - Structure of the data multiplexing over an IP channel.
* @dev: Pointer to device structure
* @session: Array of the MUX sessions.
* @channel: Reference to the IP MUX channel
* @pcie: Pointer to iosm_pcie struct
* @imem: Pointer to iosm_imem
* @wwan: Poinetr to iosm_wwan
* @ipc_protocol: Pointer to iosm_protocol
* @channel_id: Channel ID for MUX
* @protocol: Type of the MUX protocol
* @ul_flow: UL Flow type
* @nr_sessions: Number of sessions
* @instance_id: Instance ID
* @state: States of the MUX object
* @event: Initiated actions to change the state of the MUX object
* @tx_transaction_id: Transaction id for the ACB command.
* @rr_next_session: Next session number for round robin.
* @ul_adb: State of the UL ADB/ADGH.
* @size_needed: Variable to store the size needed during ADB preparation
* @ul_data_pend_bytes: Pending UL data to be processed in bytes
* @acb: Temporary ACB state
* @wwan_q_offset: This will hold the offset of the given instance
* Useful while passing or receiving packets from
* wwan/imem layer.
* @adb_finish_timer: Timer for forcefully finishing the ADB
* @acb_tx_sequence_nr: Sequence number for the ACB header.
* @params: user configurable parameters
* @adb_tx_sequence_nr: Sequence number for ADB header
* @acc_adb_size: Statistic data for logging
* @acc_payload_size: Statistic data for logging
* @initialized: MUX object is initialized
* @ev_mux_net_transmit_pending:
* 0 means inform the IPC tasklet to pass the
* accumulated uplink ADB to CP.
* @adb_prep_ongoing: Flag for ADB preparation status
*/
struct iosm_mux {
struct device *dev;
struct mux_session session[IPC_MEM_MUX_IP_SESSION_ENTRIES];
struct ipc_mem_channel *channel;
struct iosm_pcie *pcie;
struct iosm_imem *imem;
struct iosm_wwan *wwan;
struct iosm_protocol *ipc_protocol;
int channel_id;
enum ipc_mux_protocol protocol;
enum ipc_mux_ul_flow ul_flow;
int nr_sessions;
int instance_id;
enum mux_state state;
enum mux_event event;
u32 tx_transaction_id;
int rr_next_session;
struct mux_adb ul_adb;
int size_needed;
long long ul_data_pend_bytes;
struct mux_acb acb;
int wwan_q_offset;
struct hrtimer adb_finish_timer;
u16 acb_tx_sequence_nr;
struct ipc_params *params;
u16 adb_tx_sequence_nr;
unsigned long long acc_adb_size;
unsigned long long acc_payload_size;
u8 initialized:1,
ev_mux_net_transmit_pending:1,
adb_prep_ongoing;
} __packed;
/* MUX configuration structure */
struct ipc_mux_config {
enum ipc_mux_protocol protocol;
enum ipc_mux_ul_flow ul_flow;
int instance_id;
};
/**
* ipc_mux_init - Allocates and Init MUX instance
* @mux_cfg: Pointer to MUX configuration structure
* @ipc_imem: Pointer to imem data-struct
*
* Returns: Initialized mux pointer on success else NULL
*/
struct iosm_mux *ipc_mux_init(struct ipc_mux_config *mux_cfg,
struct iosm_imem *ipc_imem);
/**
* ipc_mux_deinit - Deallocates MUX instance
* @ipc_mux: Pointer to the MUX instance.
*/
void ipc_mux_deinit(struct iosm_mux *ipc_mux);
/**
* ipc_mux_check_n_restart_tx - Checks for pending UL date bytes and then
* it restarts the net interface tx queue if
* device has set flow control as off.
* @ipc_mux: Pointer to MUX data-struct
*/
void ipc_mux_check_n_restart_tx(struct iosm_mux *ipc_mux);
/**
* ipc_mux_get_active_protocol - Returns the active MUX protocol type.
* @ipc_mux: Pointer to MUX data-struct
*
* Returns: enum of type ipc_mux_protocol
*/
enum ipc_mux_protocol ipc_mux_get_active_protocol(struct iosm_mux *ipc_mux);
/**
* ipc_mux_open_session - Opens a MUX session for IP traffic.
* @ipc_mux: Pointer to MUX data-struct
* @session_nr: Interface ID or session number
*
* Returns: channel id on success, failure value on error
*/
int ipc_mux_open_session(struct iosm_mux *ipc_mux, int session_nr);
/**
* ipc_mux_close_session - Closes a MUX session.
* @ipc_mux: Pointer to MUX data-struct
* @session_nr: Interface ID or session number
*
* Returns: channel id on success, failure value on error
*/
int ipc_mux_close_session(struct iosm_mux *ipc_mux, int session_nr);
/**
* ipc_mux_get_max_sessions - Retuns the maximum sessions supported on the
* provided MUX instance..
* @ipc_mux: Pointer to MUX data-struct
*
* Returns: Number of sessions supported on Success and failure value on error
*/
int ipc_mux_get_max_sessions(struct iosm_mux *ipc_mux);
#endif