256 lines
6.8 KiB
C
256 lines
6.8 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
/*
|
||
|
* pps-gpio.c -- PPS client driver using GPIO
|
||
|
*
|
||
|
* Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt>
|
||
|
* Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
|
||
|
*/
|
||
|
|
||
|
#define PPS_GPIO_NAME "pps-gpio"
|
||
|
#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt
|
||
|
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/mod_devicetable.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/pps_kernel.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/list.h>
|
||
|
#include <linux/property.h>
|
||
|
#include <linux/timer.h>
|
||
|
#include <linux/jiffies.h>
|
||
|
|
||
|
/* Info for each registered platform device */
|
||
|
struct pps_gpio_device_data {
|
||
|
int irq; /* IRQ used as PPS source */
|
||
|
struct pps_device *pps; /* PPS source device */
|
||
|
struct pps_source_info info; /* PPS source information */
|
||
|
struct gpio_desc *gpio_pin; /* GPIO port descriptors */
|
||
|
struct gpio_desc *echo_pin;
|
||
|
struct timer_list echo_timer; /* timer to reset echo active state */
|
||
|
bool assert_falling_edge;
|
||
|
bool capture_clear;
|
||
|
unsigned int echo_active_ms; /* PPS echo active duration */
|
||
|
unsigned long echo_timeout; /* timer timeout value in jiffies */
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Report the PPS event
|
||
|
*/
|
||
|
|
||
|
static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
|
||
|
{
|
||
|
const struct pps_gpio_device_data *info;
|
||
|
struct pps_event_time ts;
|
||
|
int rising_edge;
|
||
|
|
||
|
/* Get the time stamp first */
|
||
|
pps_get_ts(&ts);
|
||
|
|
||
|
info = data;
|
||
|
|
||
|
rising_edge = gpiod_get_value(info->gpio_pin);
|
||
|
if ((rising_edge && !info->assert_falling_edge) ||
|
||
|
(!rising_edge && info->assert_falling_edge))
|
||
|
pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
|
||
|
else if (info->capture_clear &&
|
||
|
((rising_edge && info->assert_falling_edge) ||
|
||
|
(!rising_edge && !info->assert_falling_edge)))
|
||
|
pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
/* This function will only be called when an ECHO GPIO is defined */
|
||
|
static void pps_gpio_echo(struct pps_device *pps, int event, void *data)
|
||
|
{
|
||
|
/* add_timer() needs to write into info->echo_timer */
|
||
|
struct pps_gpio_device_data *info = data;
|
||
|
|
||
|
switch (event) {
|
||
|
case PPS_CAPTUREASSERT:
|
||
|
if (pps->params.mode & PPS_ECHOASSERT)
|
||
|
gpiod_set_value(info->echo_pin, 1);
|
||
|
break;
|
||
|
|
||
|
case PPS_CAPTURECLEAR:
|
||
|
if (pps->params.mode & PPS_ECHOCLEAR)
|
||
|
gpiod_set_value(info->echo_pin, 1);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* fire the timer */
|
||
|
if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) {
|
||
|
info->echo_timer.expires = jiffies + info->echo_timeout;
|
||
|
add_timer(&info->echo_timer);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Timer callback to reset the echo pin to the inactive state */
|
||
|
static void pps_gpio_echo_timer_callback(struct timer_list *t)
|
||
|
{
|
||
|
const struct pps_gpio_device_data *info;
|
||
|
|
||
|
info = from_timer(info, t, echo_timer);
|
||
|
|
||
|
gpiod_set_value(info->echo_pin, 0);
|
||
|
}
|
||
|
|
||
|
static int pps_gpio_setup(struct device *dev)
|
||
|
{
|
||
|
struct pps_gpio_device_data *data = dev_get_drvdata(dev);
|
||
|
int ret;
|
||
|
u32 value;
|
||
|
|
||
|
data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN);
|
||
|
if (IS_ERR(data->gpio_pin))
|
||
|
return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
|
||
|
"failed to request PPS GPIO\n");
|
||
|
|
||
|
data->assert_falling_edge =
|
||
|
device_property_read_bool(dev, "assert-falling-edge");
|
||
|
|
||
|
data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
|
||
|
if (IS_ERR(data->echo_pin))
|
||
|
return dev_err_probe(dev, PTR_ERR(data->echo_pin),
|
||
|
"failed to request ECHO GPIO\n");
|
||
|
|
||
|
if (!data->echo_pin)
|
||
|
return 0;
|
||
|
|
||
|
ret = device_property_read_u32(dev, "echo-active-ms", &value);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to get echo-active-ms from FW\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* sanity check on echo_active_ms */
|
||
|
if (!value || value > 999) {
|
||
|
dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
data->echo_active_ms = value;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static unsigned long
|
||
|
get_irqf_trigger_flags(const struct pps_gpio_device_data *data)
|
||
|
{
|
||
|
unsigned long flags = data->assert_falling_edge ?
|
||
|
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
|
||
|
|
||
|
if (data->capture_clear) {
|
||
|
flags |= ((flags & IRQF_TRIGGER_RISING) ?
|
||
|
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING);
|
||
|
}
|
||
|
|
||
|
return flags;
|
||
|
}
|
||
|
|
||
|
static int pps_gpio_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct pps_gpio_device_data *data;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
int ret;
|
||
|
int pps_default_params;
|
||
|
|
||
|
/* allocate space for device info */
|
||
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
||
|
if (!data)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
dev_set_drvdata(dev, data);
|
||
|
|
||
|
/* GPIO setup */
|
||
|
ret = pps_gpio_setup(dev);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* IRQ setup */
|
||
|
ret = gpiod_to_irq(data->gpio_pin);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
data->irq = ret;
|
||
|
|
||
|
/* initialize PPS specific parts of the bookkeeping data structure. */
|
||
|
data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
|
||
|
PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC;
|
||
|
if (data->capture_clear)
|
||
|
data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR |
|
||
|
PPS_ECHOCLEAR;
|
||
|
data->info.owner = THIS_MODULE;
|
||
|
snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
|
||
|
pdev->name, pdev->id);
|
||
|
if (data->echo_pin) {
|
||
|
data->info.echo = pps_gpio_echo;
|
||
|
data->echo_timeout = msecs_to_jiffies(data->echo_active_ms);
|
||
|
timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0);
|
||
|
}
|
||
|
|
||
|
/* register PPS source */
|
||
|
pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
|
||
|
if (data->capture_clear)
|
||
|
pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
|
||
|
data->pps = pps_register_source(&data->info, pps_default_params);
|
||
|
if (IS_ERR(data->pps)) {
|
||
|
dev_err(dev, "failed to register IRQ %d as PPS source\n",
|
||
|
data->irq);
|
||
|
return PTR_ERR(data->pps);
|
||
|
}
|
||
|
|
||
|
/* register IRQ interrupt handler */
|
||
|
ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler,
|
||
|
get_irqf_trigger_flags(data), data->info.name, data);
|
||
|
if (ret) {
|
||
|
pps_unregister_source(data->pps);
|
||
|
dev_err(dev, "failed to acquire IRQ %d\n", data->irq);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n",
|
||
|
data->irq);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int pps_gpio_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
|
||
|
|
||
|
pps_unregister_source(data->pps);
|
||
|
del_timer_sync(&data->echo_timer);
|
||
|
/* reset echo pin in any case */
|
||
|
gpiod_set_value(data->echo_pin, 0);
|
||
|
dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id pps_gpio_dt_ids[] = {
|
||
|
{ .compatible = "pps-gpio", },
|
||
|
{ /* sentinel */ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids);
|
||
|
|
||
|
static struct platform_driver pps_gpio_driver = {
|
||
|
.probe = pps_gpio_probe,
|
||
|
.remove = pps_gpio_remove,
|
||
|
.driver = {
|
||
|
.name = PPS_GPIO_NAME,
|
||
|
.of_match_table = pps_gpio_dt_ids,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(pps_gpio_driver);
|
||
|
MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
|
||
|
MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
|
||
|
MODULE_DESCRIPTION("Use GPIO pin as PPS source");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_VERSION("1.2.0");
|