1556 lines
50 KiB
Plaintext
1556 lines
50 KiB
Plaintext
|
# SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
menuconfig REGULATOR
|
||
|
|
bool "Voltage and Current Regulator Support"
|
||
|
|
select LINEAR_RANGES
|
||
|
|
help
|
||
|
|
Generic Voltage and Current Regulator support.
|
||
|
|
|
||
|
|
This framework is designed to provide a generic interface to voltage
|
||
|
|
and current regulators within the Linux kernel. It's intended to
|
||
|
|
provide voltage and current control to client or consumer drivers and
|
||
|
|
also provide status information to user space applications through a
|
||
|
|
sysfs interface.
|
||
|
|
|
||
|
|
The intention is to allow systems to dynamically control regulator
|
||
|
|
output in order to save power and prolong battery life. This applies
|
||
|
|
to both voltage regulators (where voltage output is controllable) and
|
||
|
|
current sinks (where current output is controllable).
|
||
|
|
|
||
|
|
This framework safely compiles out if not selected so that client
|
||
|
|
drivers can still be used in systems with no software controllable
|
||
|
|
regulators.
|
||
|
|
|
||
|
|
If unsure, say no.
|
||
|
|
|
||
|
|
|
||
|
|
if REGULATOR
|
||
|
|
|
||
|
|
config REGULATOR_DEBUG
|
||
|
|
bool "Regulator debug support"
|
||
|
|
help
|
||
|
|
Say yes here to enable debugging support.
|
||
|
|
|
||
|
|
config REGULATOR_FIXED_VOLTAGE
|
||
|
|
tristate "Fixed voltage regulator support"
|
||
|
|
help
|
||
|
|
This driver provides support for fixed voltage regulators,
|
||
|
|
useful for systems which use a combination of software
|
||
|
|
managed regulators and simple non-configurable regulators.
|
||
|
|
|
||
|
|
config REGULATOR_VIRTUAL_CONSUMER
|
||
|
|
tristate "Virtual regulator consumer support"
|
||
|
|
help
|
||
|
|
This driver provides a virtual consumer for the voltage and
|
||
|
|
current regulator API which provides sysfs controls for
|
||
|
|
configuring the supplies requested. This is mainly useful
|
||
|
|
for test purposes.
|
||
|
|
|
||
|
|
If unsure, say no.
|
||
|
|
|
||
|
|
config REGULATOR_USERSPACE_CONSUMER
|
||
|
|
tristate "Userspace regulator consumer support"
|
||
|
|
help
|
||
|
|
There are some classes of devices that are controlled entirely
|
||
|
|
from user space. Userspace consumer driver provides ability to
|
||
|
|
control power supplies for such devices.
|
||
|
|
|
||
|
|
If unsure, say no.
|
||
|
|
|
||
|
|
config REGULATOR_88PG86X
|
||
|
|
tristate "Marvell 88PG86X voltage regulators"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
|
||
|
|
They provide two I2C-controlled DC/DC step-down converters with
|
||
|
|
sleep mode and separate enable pins.
|
||
|
|
|
||
|
|
config REGULATOR_88PM800
|
||
|
|
tristate "Marvell 88PM800 Power regulators"
|
||
|
|
depends on MFD_88PM800
|
||
|
|
help
|
||
|
|
This driver supports Marvell 88PM800 voltage regulator chips.
|
||
|
|
It delivers digitally programmable output,
|
||
|
|
the voltage is programmed via I2C interface.
|
||
|
|
It's suitable to support PXA988 chips to control VCC_MAIN and
|
||
|
|
various voltages.
|
||
|
|
|
||
|
|
config REGULATOR_88PM8607
|
||
|
|
tristate "Marvell 88PM8607 Power regulators"
|
||
|
|
depends on MFD_88PM860X=y
|
||
|
|
help
|
||
|
|
This driver supports 88PM8607 voltage regulator chips.
|
||
|
|
|
||
|
|
config REGULATOR_ACT8865
|
||
|
|
tristate "Active-semi act8865 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
depends on POWER_SUPPLY
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls a active-semi act8865 voltage output
|
||
|
|
regulator via I2C bus.
|
||
|
|
|
||
|
|
config REGULATOR_ACT8945A
|
||
|
|
tristate "Active-semi ACT8945A voltage regulator"
|
||
|
|
depends on MFD_ACT8945A
|
||
|
|
help
|
||
|
|
This driver controls a active-semi ACT8945A voltage regulator
|
||
|
|
via I2C bus. The ACT8945A features three step-down DC/DC converters
|
||
|
|
and four low-dropout linear regulators, along with a ActivePath
|
||
|
|
battery charger.
|
||
|
|
|
||
|
|
config REGULATOR_AD5398
|
||
|
|
tristate "Analog Devices AD5398/AD5821 regulators"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver supports AD5398 and AD5821 current regulator chips.
|
||
|
|
If building into module, its name is ad5398.ko.
|
||
|
|
|
||
|
|
config REGULATOR_ANATOP
|
||
|
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
||
|
|
depends on ARCH_MXC || COMPILE_TEST
|
||
|
|
depends on MFD_SYSCON
|
||
|
|
help
|
||
|
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
||
|
|
regulators. It is recommended that this option be
|
||
|
|
enabled on i.MX6 platform.
|
||
|
|
|
||
|
|
config REGULATOR_AAT2870
|
||
|
|
tristate "AnalogicTech AAT2870 Regulators"
|
||
|
|
depends on MFD_AAT2870_CORE
|
||
|
|
help
|
||
|
|
If you have a AnalogicTech AAT2870 say Y to enable the
|
||
|
|
regulator driver.
|
||
|
|
|
||
|
|
config REGULATOR_AB8500
|
||
|
|
bool "ST-Ericsson AB8500 Power Regulators"
|
||
|
|
depends on AB8500_CORE
|
||
|
|
help
|
||
|
|
This driver supports the regulators found on the ST-Ericsson mixed
|
||
|
|
signal AB8500 PMIC
|
||
|
|
|
||
|
|
config REGULATOR_ARIZONA_LDO1
|
||
|
|
tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
|
||
|
|
depends on MFD_ARIZONA || MFD_MADERA
|
||
|
|
depends on SND_SOC
|
||
|
|
help
|
||
|
|
Support for the LDO1 regulators found on Cirrus Logic Madera codecs
|
||
|
|
and Wolfson Microelectronic Arizona codecs.
|
||
|
|
|
||
|
|
config REGULATOR_ARIZONA_MICSUPP
|
||
|
|
tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
|
||
|
|
depends on MFD_ARIZONA || MFD_MADERA
|
||
|
|
depends on SND_SOC
|
||
|
|
help
|
||
|
|
Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
|
||
|
|
and Wolfson Microelectronic Arizona codecs
|
||
|
|
devices.
|
||
|
|
|
||
|
|
config REGULATOR_ARM_SCMI
|
||
|
|
tristate "SCMI based regulator driver"
|
||
|
|
depends on ARM_SCMI_PROTOCOL && OF
|
||
|
|
help
|
||
|
|
This adds the regulator driver support for ARM platforms using SCMI
|
||
|
|
protocol for device voltage management.
|
||
|
|
This driver uses SCMI Message Protocol driver to interact with the
|
||
|
|
firmware providing the device Voltage functionality.
|
||
|
|
|
||
|
|
config REGULATOR_AS3711
|
||
|
|
tristate "AS3711 PMIC"
|
||
|
|
depends on MFD_AS3711
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
AS3711 PMIC
|
||
|
|
|
||
|
|
config REGULATOR_AS3722
|
||
|
|
tristate "AMS AS3722 PMIC Regulators"
|
||
|
|
depends on MFD_AS3722
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
AS3722 PMIC. This will enable support for all the software
|
||
|
|
controllable DCDC/LDO regulators.
|
||
|
|
|
||
|
|
config REGULATOR_ATC260X
|
||
|
|
tristate "Actions Semi ATC260x PMIC Regulators"
|
||
|
|
depends on MFD_ATC260X
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
ATC260x PMICs. This will enable support for all the software
|
||
|
|
controllable DCDC/LDO regulators.
|
||
|
|
|
||
|
|
config REGULATOR_AXP20X
|
||
|
|
tristate "X-POWERS AXP20X PMIC Regulators"
|
||
|
|
depends on MFD_AXP20X
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
AXP20X PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_BCM590XX
|
||
|
|
tristate "Broadcom BCM590xx PMU Regulators"
|
||
|
|
depends on MFD_BCM590XX
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
BCM590xx PMUs. This will enable support for the software
|
||
|
|
controllable LDO/Switching regulators.
|
||
|
|
|
||
|
|
config REGULATOR_BD71815
|
||
|
|
tristate "ROHM BD71815 Power Regulator"
|
||
|
|
depends on MFD_ROHM_BD71828
|
||
|
|
select REGULATOR_ROHM
|
||
|
|
help
|
||
|
|
This driver supports voltage regulators on ROHM BD71815 PMIC.
|
||
|
|
This will enable support for the software controllable buck
|
||
|
|
and LDO regulators and a current regulator for LEDs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called bd71815-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_BD71828
|
||
|
|
tristate "ROHM BD71828 Power Regulator"
|
||
|
|
depends on MFD_ROHM_BD71828
|
||
|
|
select REGULATOR_ROHM
|
||
|
|
help
|
||
|
|
This driver supports voltage regulators on ROHM BD71828 PMIC.
|
||
|
|
This will enable support for the software controllable buck
|
||
|
|
and LDO regulators.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called bd71828-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_BD718XX
|
||
|
|
tristate "ROHM BD71837 Power Regulator"
|
||
|
|
depends on MFD_ROHM_BD718XX
|
||
|
|
select REGULATOR_ROHM
|
||
|
|
help
|
||
|
|
This driver supports voltage regulators on ROHM BD71837 PMIC.
|
||
|
|
This will enable support for the software controllable buck
|
||
|
|
and LDO regulators.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called bd718x7-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_BD9571MWV
|
||
|
|
tristate "ROHM BD9571MWV Regulators"
|
||
|
|
depends on MFD_BD9571MWV
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
ROHM BD9571MWV PMIC. This will enable support for the software
|
||
|
|
controllable regulator and voltage sampling units.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called bd9571mwv-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_BD957XMUF
|
||
|
|
tristate "ROHM BD9576MUF and BD9573MUF Regulators"
|
||
|
|
depends on MFD_ROHM_BD957XMUF
|
||
|
|
help
|
||
|
|
This driver supports voltage regulators on ROHM BD9576MUF and
|
||
|
|
BD9573MUF PMICs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called bd9576-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_CPCAP
|
||
|
|
tristate "Motorola CPCAP regulator"
|
||
|
|
depends on MFD_CPCAP
|
||
|
|
help
|
||
|
|
Say y here for CPCAP regulator found on some Motorola phones
|
||
|
|
and tablets such as Droid 4.
|
||
|
|
|
||
|
|
config REGULATOR_CROS_EC
|
||
|
|
tristate "ChromeOS EC regulators"
|
||
|
|
depends on CROS_EC && OF
|
||
|
|
help
|
||
|
|
This driver supports voltage regulators that is connected to ChromeOS
|
||
|
|
EC and controlled through EC host commands.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called cros-ec-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_DA903X
|
||
|
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
||
|
|
depends on PMIC_DA903X
|
||
|
|
depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
|
||
|
|
help
|
||
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
||
|
|
Dialog Semiconductor DA9030/DA9034 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_DA9052
|
||
|
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators"
|
||
|
|
depends on PMIC_DA9052
|
||
|
|
help
|
||
|
|
This driver supports the voltage regulators of DA9052-BC and
|
||
|
|
DA9053-AA/Bx PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_DA9055
|
||
|
|
tristate "Dialog Semiconductor DA9055 regulators"
|
||
|
|
depends on MFD_DA9055
|
||
|
|
help
|
||
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
||
|
|
Dialog Semiconductor DA9055 PMIC.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called da9055-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_DA9062
|
||
|
|
tristate "Dialog Semiconductor DA9061/62 regulators"
|
||
|
|
depends on MFD_DA9062
|
||
|
|
help
|
||
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
||
|
|
DA9061 and DA9062 PMICs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called da9062-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_DA9063
|
||
|
|
tristate "Dialog Semiconductor DA9063 regulators"
|
||
|
|
depends on MFD_DA9063 && OF
|
||
|
|
help
|
||
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
||
|
|
DA9063 PMICs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called da9063-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_DA9121
|
||
|
|
tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support for the Dialog Semiconductor DA9121. The
|
||
|
|
DA9121 is a single channel dual-phase buck converter controlled
|
||
|
|
through an I2C interface.
|
||
|
|
|
||
|
|
DA9121 Single-channel dual-phase 10A buck converter
|
||
|
|
DA9130 Single-channel dual-phase 10A buck converter (Automotive)
|
||
|
|
DA9217 Single-channel dual-phase 6A buck converter
|
||
|
|
DA9122 Dual-channel single-phase 5A buck converter
|
||
|
|
DA9131 Dual-channel single-phase 5A buck converter (Automotive)
|
||
|
|
DA9220 Dual-channel single-phase 3A buck converter
|
||
|
|
DA9132 Dual-channel single-phase 3A buck converter (Automotive)
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called da9121-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_DA9210
|
||
|
|
tristate "Dialog Semiconductor DA9210 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support for the Dialog Semiconductor DA9210.
|
||
|
|
The DA9210 is a multi-phase synchronous step down
|
||
|
|
converter 12A DC-DC Buck controlled through an I2C
|
||
|
|
interface.
|
||
|
|
|
||
|
|
config REGULATOR_DA9211
|
||
|
|
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support for the Dialog Semiconductor DA9211/DA9212
|
||
|
|
/DA9213/DA9214/DA9215.
|
||
|
|
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
|
||
|
|
step down converter 12A or 16A DC-DC Buck controlled through an I2C
|
||
|
|
interface.
|
||
|
|
|
||
|
|
config REGULATOR_DBX500_PRCMU
|
||
|
|
bool
|
||
|
|
|
||
|
|
config REGULATOR_DB8500_PRCMU
|
||
|
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
||
|
|
depends on MFD_DB8500_PRCMU
|
||
|
|
select REGULATOR_DBX500_PRCMU
|
||
|
|
help
|
||
|
|
This driver supports the voltage domain regulators controlled by the
|
||
|
|
DB8500 PRCMU
|
||
|
|
|
||
|
|
config REGULATOR_FAN53555
|
||
|
|
tristate "Fairchild FAN53555 Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports Fairchild FAN53555 Digitally Programmable
|
||
|
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
|
||
|
|
regulator that delivers a digitally programmable output from an
|
||
|
|
input voltage supply of 2.5V to 5.5V. The output voltage is
|
||
|
|
programmed through an I2C interface.
|
||
|
|
|
||
|
|
config REGULATOR_FAN53880
|
||
|
|
tristate "Fairchild FAN53880 Regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports Fairchild (ON Semiconductor) FAN53880
|
||
|
|
regulator. The regulator is a programmable power management IC
|
||
|
|
(PMIC), it is controlled by I2C and provides one BUCK, one BOOST
|
||
|
|
and four LDO outputs.
|
||
|
|
|
||
|
|
config REGULATOR_GPIO
|
||
|
|
tristate "GPIO regulator support"
|
||
|
|
depends on GPIOLIB || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver provides support for regulators that can be
|
||
|
|
controlled via gpios.
|
||
|
|
It is capable of supporting current and voltage regulators
|
||
|
|
and the platform has to provide a mapping of GPIO-states
|
||
|
|
to target volts/amps.
|
||
|
|
|
||
|
|
config REGULATOR_HI6421
|
||
|
|
tristate "HiSilicon Hi6421 PMIC voltage regulator support"
|
||
|
|
depends on MFD_HI6421_PMIC && OF
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
HiSilicon Hi6421 PMU / Codec IC.
|
||
|
|
Hi6421 is a multi-function device which, on regulator part, provides
|
||
|
|
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
|
||
|
|
of them come with support to either ECO (idle) or sleep mode.
|
||
|
|
|
||
|
|
config REGULATOR_HI6421V530
|
||
|
|
tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
|
||
|
|
depends on MFD_HI6421_PMIC && OF
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on
|
||
|
|
HiSilicon Hi6421v530 PMU / Codec IC.
|
||
|
|
Hi6421v530 is a multi-function device which, on regulator part,
|
||
|
|
provides 5 general purpose LDOs, and all of them come with support
|
||
|
|
to either ECO (idle) or sleep mode.
|
||
|
|
|
||
|
|
config REGULATOR_HI655X
|
||
|
|
tristate "Hisilicon HI655X PMIC regulators support"
|
||
|
|
depends on ARCH_HISI || COMPILE_TEST
|
||
|
|
depends on MFD_HI655X_PMIC && OF
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators of the
|
||
|
|
Hisilicon Hi655x PMIC device.
|
||
|
|
|
||
|
|
config REGULATOR_HI6421V600
|
||
|
|
tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
|
||
|
|
depends on MFD_HI6421_SPMI && OF
|
||
|
|
select REGMAP
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on
|
||
|
|
HiSilicon Hi6421v600 PMU / Codec IC.
|
||
|
|
This is used on Kirin 3670 boards, like HiKey 970.
|
||
|
|
|
||
|
|
config REGULATOR_ISL9305
|
||
|
|
tristate "Intersil ISL9305 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports ISL9305 voltage regulator chip.
|
||
|
|
|
||
|
|
config REGULATOR_ISL6271A
|
||
|
|
tristate "Intersil ISL6271A Power regulator"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver supports ISL6271A voltage regulator chip.
|
||
|
|
|
||
|
|
config REGULATOR_LM363X
|
||
|
|
tristate "TI LM363X voltage regulators"
|
||
|
|
depends on MFD_TI_LMU
|
||
|
|
help
|
||
|
|
This driver supports LM3631, LM3632 and LM36274 voltage regulators for
|
||
|
|
the LCD bias.
|
||
|
|
One boost output voltage is configurable and always on.
|
||
|
|
Other LDOs are used for the display module.
|
||
|
|
|
||
|
|
config REGULATOR_LOCHNAGAR
|
||
|
|
tristate "Cirrus Logic Lochnagar regulator driver"
|
||
|
|
depends on MFD_LOCHNAGAR
|
||
|
|
help
|
||
|
|
This enables regulator support on the Cirrus Logic Lochnagar audio
|
||
|
|
development board.
|
||
|
|
|
||
|
|
config REGULATOR_LP3971
|
||
|
|
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
Say Y here to support the voltage regulators and convertors
|
||
|
|
on National Semiconductors LP3971 PMIC
|
||
|
|
|
||
|
|
config REGULATOR_LP3972
|
||
|
|
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
Say Y here to support the voltage regulators and convertors
|
||
|
|
on National Semiconductors LP3972 PMIC
|
||
|
|
|
||
|
|
config REGULATOR_LP872X
|
||
|
|
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports LP8720/LP8725 PMIC
|
||
|
|
|
||
|
|
config REGULATOR_LP873X
|
||
|
|
tristate "TI LP873X Power regulators"
|
||
|
|
depends on MFD_TI_LP873X && OF
|
||
|
|
help
|
||
|
|
This driver supports LP873X voltage regulator chips. LP873X
|
||
|
|
provides two step-down converters and two general-purpose LDO
|
||
|
|
voltage regulators. It supports software based voltage control
|
||
|
|
for different voltage domains
|
||
|
|
|
||
|
|
config REGULATOR_LP8755
|
||
|
|
tristate "TI LP8755 High Performance PMU driver"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports LP8755 High Performance PMU driver. This
|
||
|
|
chip contains six step-down DC/DC converters which can support
|
||
|
|
9 mode multiphase configuration.
|
||
|
|
|
||
|
|
config REGULATOR_LP87565
|
||
|
|
tristate "TI LP87565 Power regulators"
|
||
|
|
depends on MFD_TI_LP87565 && OF
|
||
|
|
help
|
||
|
|
This driver supports LP87565 voltage regulator chips. LP87565
|
||
|
|
provides four step-down converters. It supports software based
|
||
|
|
voltage control for different voltage domains
|
||
|
|
|
||
|
|
config REGULATOR_LP8788
|
||
|
|
tristate "TI LP8788 Power Regulators"
|
||
|
|
depends on MFD_LP8788
|
||
|
|
help
|
||
|
|
This driver supports LP8788 voltage regulator chip.
|
||
|
|
|
||
|
|
config REGULATOR_LTC3589
|
||
|
|
tristate "LTC3589 8-output voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
||
|
|
8-output regulators controlled via I2C.
|
||
|
|
|
||
|
|
config REGULATOR_LTC3676
|
||
|
|
tristate "LTC3676 8-output voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This enables support for the LTC3676
|
||
|
|
8-output regulators controlled via I2C.
|
||
|
|
|
||
|
|
config REGULATOR_MAX14577
|
||
|
|
tristate "Maxim 14577/77836 regulator"
|
||
|
|
depends on MFD_MAX14577
|
||
|
|
help
|
||
|
|
This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
|
||
|
|
The MAX14577 regulators include safeout LDO and charger current
|
||
|
|
regulator. The MAX77836 has two additional LDOs.
|
||
|
|
|
||
|
|
config REGULATOR_MAX1586
|
||
|
|
tristate "Maxim 1586/1587 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 1586 or 1587 voltage output
|
||
|
|
regulator via I2C bus. The provided regulator is suitable
|
||
|
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
||
|
|
|
||
|
|
config REGULATOR_MAX597X
|
||
|
|
tristate "Maxim 597x power switch and monitor"
|
||
|
|
depends on I2C
|
||
|
|
depends on OF
|
||
|
|
depends on MFD_MAX597X
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 5970/5978 switch via I2C bus.
|
||
|
|
The MAX5970/5978 is a smart switch with no output regulation, but
|
||
|
|
fault protection and voltage and current monitoring capabilities.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77620
|
||
|
|
tristate "Maxim 77620/MAX20024 voltage regulator"
|
||
|
|
depends on MFD_MAX77620 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls Maxim MAX77620 voltage output regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
||
|
|
chip to control Step-Down DC-DC and LDOs. Say Y here to
|
||
|
|
enable the regulator driver.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77650
|
||
|
|
tristate "Maxim MAX77650/77651 regulator support"
|
||
|
|
depends on MFD_MAX77650 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Regulator driver for MAX77650/77651 PMIC from Maxim
|
||
|
|
Semiconductor. This device has a SIMO with three independent
|
||
|
|
power rails and an LDO.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8649
|
||
|
|
tristate "Maxim 8649 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8649 voltage output regulator via
|
||
|
|
I2C bus.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8660
|
||
|
|
tristate "Maxim 8660/8661 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8660/8661 voltage output
|
||
|
|
regulator via I2C bus.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8893
|
||
|
|
tristate "Maxim 8893 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8893 voltage output
|
||
|
|
regulator via I2C bus.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8907
|
||
|
|
tristate "Maxim 8907 voltage regulator"
|
||
|
|
depends on MFD_MAX8907 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8907 voltage output regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
||
|
|
chip to control Step-Down DC-DC and LDOs.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8925
|
||
|
|
tristate "Maxim MAX8925 Power Management IC"
|
||
|
|
depends on MFD_MAX8925
|
||
|
|
help
|
||
|
|
Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8952
|
||
|
|
tristate "Maxim MAX8952 Power Management IC"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8952 voltage output regulator
|
||
|
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
|
||
|
|
modes ranging from 0.77V to 1.40V by 0.01V steps.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8973
|
||
|
|
tristate "Maxim MAX8973A voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
depends on THERMAL && THERMAL_OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
|
||
|
|
switching regulator delivers up to 9A of output current. Each
|
||
|
|
phase operates at a 2MHz fixed frequency with a 120 deg shift
|
||
|
|
from the adjacent phase, allowing the use of small magnetic component.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8997
|
||
|
|
tristate "Maxim 8997/8966 regulator"
|
||
|
|
depends on MFD_MAX8997
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8997/8966 regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for S5PC110,
|
||
|
|
S5PV210, and Exynos-4 chips to control VCC_CORE and
|
||
|
|
VCC_USIM voltages.
|
||
|
|
|
||
|
|
config REGULATOR_MAX8998
|
||
|
|
tristate "Maxim 8998 voltage regulator"
|
||
|
|
depends on MFD_MAX8998
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 8998 voltage output regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for S3C6410
|
||
|
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
||
|
|
|
||
|
|
config REGULATOR_MAX20086
|
||
|
|
tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim MAX20086-MAX20089 camera power
|
||
|
|
protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
|
||
|
|
the device model. This driver is only capable to turn on/off them.
|
||
|
|
|
||
|
|
config REGULATOR_MAX20411
|
||
|
|
tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls the Maxim MAX20411 family of high-efficiency,
|
||
|
|
syncrhonous step-down converters.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77686
|
||
|
|
tristate "Maxim 77686 regulator"
|
||
|
|
depends on MFD_MAX77686 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 77686 regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for
|
||
|
|
Exynos-4 chips to control VARM and VINT voltages.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77693
|
||
|
|
tristate "Maxim 77693/77843 regulator"
|
||
|
|
depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 77693/77843 regulators via I2C bus.
|
||
|
|
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
|
||
|
|
and one current regulator 'CHARGER'. This is suitable for
|
||
|
|
Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77802
|
||
|
|
tristate "Maxim 77802 regulator"
|
||
|
|
depends on MFD_MAX77686 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 77802 regulator
|
||
|
|
via I2C bus. The provided regulator is suitable for
|
||
|
|
Exynos5420/Exynos5800 SoCs to control various voltages.
|
||
|
|
It includes support for control of voltage and ramp speed.
|
||
|
|
|
||
|
|
config REGULATOR_MAX77826
|
||
|
|
tristate "Maxim 77826 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver controls a Maxim 77826 regulator via I2C bus.
|
||
|
|
The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
|
||
|
|
It includes support for control of output voltage. This
|
||
|
|
regulator is found on the Samsung Galaxy S5 (klte) smartphone.
|
||
|
|
|
||
|
|
config REGULATOR_MC13XXX_CORE
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config REGULATOR_MC13783
|
||
|
|
tristate "Freescale MC13783 regulator driver"
|
||
|
|
depends on MFD_MC13XXX
|
||
|
|
select REGULATOR_MC13XXX_CORE
|
||
|
|
help
|
||
|
|
Say y here to support the regulators found on the Freescale MC13783
|
||
|
|
PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_MC13892
|
||
|
|
tristate "Freescale MC13892 regulator driver"
|
||
|
|
depends on MFD_MC13XXX
|
||
|
|
select REGULATOR_MC13XXX_CORE
|
||
|
|
help
|
||
|
|
Say y here to support the regulators found on the Freescale MC13892
|
||
|
|
PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_MCP16502
|
||
|
|
tristate "Microchip MCP16502 PMIC"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the MCP16502 PMIC. This driver supports
|
||
|
|
basic operations (get/set voltage, get/set operating mode)
|
||
|
|
through the regulator interface. In addition it enables
|
||
|
|
suspend-to-ram/standby transition.
|
||
|
|
|
||
|
|
config REGULATOR_MP5416
|
||
|
|
tristate "Monolithic MP5416 PMIC"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the MP5416 PMIC. This will enable supports
|
||
|
|
the software controllable 4 buck and 4 LDO regulators.
|
||
|
|
Say M here if you want to include support for the regulator as a
|
||
|
|
module.
|
||
|
|
|
||
|
|
config REGULATOR_MP8859
|
||
|
|
tristate "MPS MP8859 regulator driver"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the MP8859 voltage regulator. This driver
|
||
|
|
supports basic operations (get/set voltage) through the regulator
|
||
|
|
interface.
|
||
|
|
Say M here if you want to include support for the regulator as a
|
||
|
|
module. The module will be named "mp8859".
|
||
|
|
|
||
|
|
config REGULATOR_MP886X
|
||
|
|
tristate "MPS MP8869 regulator driver"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports the MP8869 voltage regulator.
|
||
|
|
|
||
|
|
config REGULATOR_MPQ7920
|
||
|
|
tristate "Monolithic MPQ7920 PMIC"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the MPQ7920 PMIC. This will enable supports
|
||
|
|
the software controllable 4 buck and 5 LDO regulators.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6311
|
||
|
|
tristate "MediaTek MT6311 PMIC"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6311 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6315
|
||
|
|
tristate "MediaTek MT6315 PMIC"
|
||
|
|
depends on SPMI
|
||
|
|
select REGMAP_SPMI
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6315 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6323
|
||
|
|
tristate "MediaTek MT6323 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6323 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6331
|
||
|
|
tristate "MediaTek MT6331 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6331 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface
|
||
|
|
|
||
|
|
config REGULATOR_MT6332
|
||
|
|
tristate "MediaTek MT6332 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6332 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface
|
||
|
|
|
||
|
|
config REGULATOR_MT6357
|
||
|
|
tristate "MediaTek MT6357 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6357 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6358
|
||
|
|
tristate "MediaTek MT6358 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6358 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6359
|
||
|
|
tristate "MediaTek MT6359 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6359 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6360
|
||
|
|
tristate "MT6360 SubPMIC Regulator"
|
||
|
|
depends on MFD_MT6360
|
||
|
|
help
|
||
|
|
Say Y here to enable MT6360 regulator support.
|
||
|
|
This is support MT6360 PMIC/LDO part include
|
||
|
|
2-channel buck with Thermal Shutdown and Overload Protection
|
||
|
|
6-channel High PSRR and Low Dropout LDO.
|
||
|
|
|
||
|
|
config REGULATOR_MT6370
|
||
|
|
tristate "MT6370 SubPMIC Regulator"
|
||
|
|
depends on MFD_MT6370
|
||
|
|
help
|
||
|
|
Say Y here to enable MT6370 regulator support.
|
||
|
|
This driver supports the control for DisplayBias voltages and one
|
||
|
|
general purpose LDO which is commonly used to drive the vibrator.
|
||
|
|
|
||
|
|
config REGULATOR_MT6380
|
||
|
|
tristate "MediaTek MT6380 PMIC"
|
||
|
|
depends on MTK_PMIC_WRAP
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6380 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MT6397
|
||
|
|
tristate "MediaTek MT6397 PMIC"
|
||
|
|
depends on MFD_MT6397
|
||
|
|
help
|
||
|
|
Say y here to select this option to enable the power regulator of
|
||
|
|
MediaTek MT6397 PMIC.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface.
|
||
|
|
|
||
|
|
config REGULATOR_MTK_DVFSRC
|
||
|
|
tristate "MediaTek DVFSRC regulator driver"
|
||
|
|
depends on MTK_DVFSRC
|
||
|
|
help
|
||
|
|
Say y here to control regulator by DVFSRC (dynamic voltage
|
||
|
|
and frequency scaling resource collector).
|
||
|
|
This driver supports to control regulators via the DVFSRC
|
||
|
|
of Mediatek. It allows for voting on regulator state
|
||
|
|
between multiple users.
|
||
|
|
|
||
|
|
config REGULATOR_PALMAS
|
||
|
|
tristate "TI Palmas PMIC Regulators"
|
||
|
|
depends on MFD_PALMAS
|
||
|
|
help
|
||
|
|
If you wish to control the regulators on the Palmas series of
|
||
|
|
chips say Y here. This will enable support for all the software
|
||
|
|
controllable SMPS/LDO regulators.
|
||
|
|
|
||
|
|
The regulators available on Palmas series chips vary depending
|
||
|
|
on the muxing. This is handled automatically in the driver by
|
||
|
|
reading the mux info from OTP.
|
||
|
|
|
||
|
|
config REGULATOR_PBIAS
|
||
|
|
tristate "PBIAS OMAP regulator driver"
|
||
|
|
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
|
||
|
|
help
|
||
|
|
Say y here to support pbias regulator for mmc1:SD card i/o
|
||
|
|
on OMAP SoCs.
|
||
|
|
This driver provides support for OMAP pbias modelled
|
||
|
|
regulators.
|
||
|
|
|
||
|
|
config REGULATOR_PCA9450
|
||
|
|
tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
|
||
|
|
regulator driver.
|
||
|
|
|
||
|
|
config REGULATOR_PCAP
|
||
|
|
tristate "Motorola PCAP2 regulator driver"
|
||
|
|
depends on EZX_PCAP
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators of the
|
||
|
|
PCAP2 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_PCF50633
|
||
|
|
tristate "NXP PCF50633 regulator driver"
|
||
|
|
depends on MFD_PCF50633
|
||
|
|
help
|
||
|
|
Say Y here to support the voltage regulators and converters
|
||
|
|
on PCF50633
|
||
|
|
|
||
|
|
config REGULATOR_PF8X00
|
||
|
|
tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the regulators found on the NXP
|
||
|
|
PF8100/PF8121A/PF8200 PMIC.
|
||
|
|
|
||
|
|
Say M here if you want to support for the regulators found
|
||
|
|
on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
|
||
|
|
"pf8x00-regulator".
|
||
|
|
|
||
|
|
config REGULATOR_PFUZE100
|
||
|
|
tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the regulators found on the Freescale
|
||
|
|
PFUZE100/200/3000/3001 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_PV88060
|
||
|
|
tristate "Powerventure Semiconductor PV88060 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the voltage regulators and convertors
|
||
|
|
PV88060
|
||
|
|
|
||
|
|
config REGULATOR_PV88080
|
||
|
|
tristate "Powerventure Semiconductor PV88080 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the buck convertors on PV88080
|
||
|
|
|
||
|
|
config REGULATOR_PV88090
|
||
|
|
tristate "Powerventure Semiconductor PV88090 regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support the voltage regulators and convertors
|
||
|
|
on PV88090
|
||
|
|
|
||
|
|
config REGULATOR_PWM
|
||
|
|
tristate "PWM voltage regulator"
|
||
|
|
depends on PWM
|
||
|
|
help
|
||
|
|
This driver supports PWM controlled voltage regulators. PWM
|
||
|
|
duty cycle can increase or decrease the voltage.
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_RPM
|
||
|
|
tristate "Qualcomm RPM regulator driver"
|
||
|
|
depends on MFD_QCOM_RPM
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
regulators exposed by the Resource Power Manager found in Qualcomm
|
||
|
|
8660, 8960 and 8064 based devices.
|
||
|
|
|
||
|
|
Say M here if you want to include support for the regulators on the
|
||
|
|
Qualcomm RPM as a module. The module will be named
|
||
|
|
"qcom_rpm-regulator".
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_RPMH
|
||
|
|
tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
|
||
|
|
depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
|
||
|
|
depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
|
||
|
|
help
|
||
|
|
This driver supports control of PMIC regulators via the RPMh hardware
|
||
|
|
block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
|
||
|
|
control allows for voting on regulator state between multiple
|
||
|
|
processors within the SoC.
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_SMD_RPM
|
||
|
|
tristate "Qualcomm SMD based RPM regulator driver"
|
||
|
|
depends on QCOM_SMD_RPM
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
regulators exposed by the Resource Power Manager found in Qualcomm
|
||
|
|
8974 based devices.
|
||
|
|
|
||
|
|
Say M here if you want to include support for the regulators on the
|
||
|
|
Qualcomm RPM as a module. The module will be named
|
||
|
|
"qcom_smd-regulator".
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_SPMI
|
||
|
|
tristate "Qualcomm SPMI regulator driver"
|
||
|
|
depends on SPMI || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
regulators found in Qualcomm SPMI PMICs.
|
||
|
|
|
||
|
|
Say M here if you want to include support for the regulators on the
|
||
|
|
Qualcomm SPMI PMICs as a module. The module will be named
|
||
|
|
"qcom_spmi-regulator".
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_USB_VBUS
|
||
|
|
tristate "Qualcomm USB Vbus regulator driver"
|
||
|
|
depends on SPMI || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
regulator used to enable the VBUS output.
|
||
|
|
|
||
|
|
Say M here if you want to include support for enabling the VBUS output
|
||
|
|
as a module. The module will be named "qcom_usb_vbus_regulator".
|
||
|
|
|
||
|
|
config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
|
||
|
|
tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
|
||
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
||
|
|
depends on I2C
|
||
|
|
depends on OF_GPIO
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports ATTINY regulator on the Raspberry Pi 7-inch
|
||
|
|
touchscreen unit. The regulator is used to enable power to the
|
||
|
|
TC358762, display and to control backlight.
|
||
|
|
|
||
|
|
config REGULATOR_RC5T583
|
||
|
|
tristate "RICOH RC5T583 Power regulators"
|
||
|
|
depends on MFD_RC5T583
|
||
|
|
help
|
||
|
|
Select this option to enable the power regulator of RICOH
|
||
|
|
PMIC RC5T583.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
||
|
|
outputs which can be controlled by i2c communication.
|
||
|
|
|
||
|
|
config REGULATOR_RK808
|
||
|
|
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
|
||
|
|
depends on MFD_RK808
|
||
|
|
help
|
||
|
|
Select this option to enable the power regulator of ROCKCHIP
|
||
|
|
PMIC RK805,RK809&RK817,RK808 and RK818.
|
||
|
|
This driver supports the control of different power rails of device
|
||
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
||
|
|
outputs which can be controlled by i2c communication.
|
||
|
|
|
||
|
|
config REGULATOR_RN5T618
|
||
|
|
tristate "Ricoh RN5T567/618 voltage regulators"
|
||
|
|
depends on MFD_RN5T618
|
||
|
|
help
|
||
|
|
Say y here to support the regulators found on Ricoh RN5T567,
|
||
|
|
RN5T618 or RC5T619 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_ROHM
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config REGULATOR_RT4801
|
||
|
|
tristate "Richtek RT4801 Regulators"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
|
||
|
|
The device supports two regulators (DSVP/DSVN).
|
||
|
|
|
||
|
|
config REGULATOR_RT4831
|
||
|
|
tristate "Richtek RT4831 DSV Regulators"
|
||
|
|
depends on MFD_RT4831
|
||
|
|
help
|
||
|
|
This adds support for voltage regulators in Richtek RT4831.
|
||
|
|
There are three regulators (VLCM/DSVP/DSVN).
|
||
|
|
VLCM is a virtual voltage input for DSVP/DSVN inside IC.
|
||
|
|
And DSVP/DSVN is the real Vout range from 4V to 6.5V.
|
||
|
|
It's common used to provide the power for the display panel.
|
||
|
|
|
||
|
|
config REGULATOR_RT5033
|
||
|
|
tristate "Richtek RT5033 Regulators"
|
||
|
|
depends on MFD_RT5033
|
||
|
|
help
|
||
|
|
This adds support for voltage and current regulators in Richtek
|
||
|
|
RT5033 PMIC. The device supports multiple regulators like
|
||
|
|
current source, LDO and Buck.
|
||
|
|
|
||
|
|
config REGULATOR_RT5120
|
||
|
|
tristate "Richtek RT5120 PMIC Regulators"
|
||
|
|
depends on MFD_RT5120
|
||
|
|
help
|
||
|
|
This adds support for voltage regulator in Richtek RT5120 PMIC.
|
||
|
|
It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN
|
||
|
|
to control external power source. Only BUCK1 is adjustable from
|
||
|
|
600mV to 1395mV, per step 6.250mV. The others are all fixed voltage
|
||
|
|
by external hardware circuit.
|
||
|
|
|
||
|
|
config REGULATOR_RT5190A
|
||
|
|
tristate "Richtek RT5190A PMIC"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This adds support for voltage regulator in Richtek RT5190A PMIC.
|
||
|
|
It integratas 1 channel buck controller, 3 channels high efficiency
|
||
|
|
buck converters, 1 LDO, mute AC OFF depop function, with the general
|
||
|
|
I2C control interface.
|
||
|
|
|
||
|
|
config REGULATOR_RT5759
|
||
|
|
tristate "Richtek RT5759 Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This adds support for voltage regulator in Richtek RT5759.
|
||
|
|
The RT5759 is a high-performance, synchronous step-down DC-DC
|
||
|
|
converter that can deliver up to 9A output current from 3V to 6.5V
|
||
|
|
input supply.
|
||
|
|
|
||
|
|
config REGULATOR_RT6160
|
||
|
|
tristate "Richtek RT6160 BuckBoost voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This adds support for voltage regulator in Richtek RT6160.
|
||
|
|
This device automatically change voltage output mode from
|
||
|
|
Buck or Boost. The mode transition depend on the input source voltage.
|
||
|
|
The wide output range is from 2025mV to 5200mV and can be used on most
|
||
|
|
common application scenario.
|
||
|
|
|
||
|
|
config REGULATOR_RT6190
|
||
|
|
tristate "Richtek RT6190 4-Switch BuckBoost controller"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
The RT6190 is a 4-Switch BuckBoost controller designed for converting
|
||
|
|
input voltage to output voltage that can be equal to, higher or lower
|
||
|
|
than input voltage. It operates with wide input voltage range from
|
||
|
|
4.5V to 36V, and the output voltage can be set from 3V to 36V by
|
||
|
|
external FB pin.
|
||
|
|
|
||
|
|
config REGULATOR_RT6245
|
||
|
|
tristate "Richtek RT6245 voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This adds support for Richtek RT6245 voltage regulator.
|
||
|
|
It can support up to 14A output current and adjustable output voltage
|
||
|
|
from 0.4375V to 1.3875V, per step 12.5mV.
|
||
|
|
|
||
|
|
config REGULATOR_RTQ2134
|
||
|
|
tristate "Richtek RTQ2134 SubPMIC Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver adds support for RTQ2134 SubPMIC regulators.
|
||
|
|
The RTQ2134 is a multi-phase, programmable power management IC that
|
||
|
|
integrate with four high efficient, synchronous step-down converter
|
||
|
|
cores. It features wide output voltage range and the capability to
|
||
|
|
configure the corresponding power stages.
|
||
|
|
|
||
|
|
config REGULATOR_RTMV20
|
||
|
|
tristate "Richtek RTMV20 Laser Diode Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver adds support for the load switch current regulator on
|
||
|
|
the Richtek RTMV20. It can support the load current up to 6A and
|
||
|
|
integrate strobe/vsync/fsin signal to synchronize the IR camera.
|
||
|
|
|
||
|
|
config REGULATOR_RTQ6752
|
||
|
|
tristate "Richtek RTQ6752 TFT LCD voltage regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver adds support for Richtek RTQ6752. RTQ6752 includes two
|
||
|
|
synchronous boost converters for PAVDD, and one synchronous NAVDD
|
||
|
|
buck-boost. This device is suitable for automotive TFT-LCD panel.
|
||
|
|
|
||
|
|
config REGULATOR_S2MPA01
|
||
|
|
tristate "Samsung S2MPA01 voltage regulator"
|
||
|
|
depends on MFD_SEC_CORE || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver controls Samsung S2MPA01 voltage output regulator
|
||
|
|
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
|
||
|
|
|
||
|
|
config REGULATOR_S2MPS11
|
||
|
|
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
|
||
|
|
depends on MFD_SEC_CORE || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
|
||
|
|
output regulator via I2C bus. The chip is comprised of high efficient
|
||
|
|
Buck converters including Dual-Phase Buck converter, Buck-Boost
|
||
|
|
converter, various LDOs.
|
||
|
|
|
||
|
|
config REGULATOR_S5M8767
|
||
|
|
tristate "Samsung S5M8767A voltage regulator"
|
||
|
|
depends on MFD_SEC_CORE || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports a Samsung S5M8767A voltage output regulator
|
||
|
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
||
|
|
supports DVS mode with 8bits of output voltage control.
|
||
|
|
|
||
|
|
config REGULATOR_SC2731
|
||
|
|
tristate "Spreadtrum SC2731 power regulator driver"
|
||
|
|
depends on MFD_SC27XX_PMIC || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
SC2731 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_SKY81452
|
||
|
|
tristate "Skyworks Solutions SKY81452 voltage regulator"
|
||
|
|
depends on MFD_SKY81452
|
||
|
|
help
|
||
|
|
This driver supports Skyworks SKY81452 voltage output regulator
|
||
|
|
via I2C bus. SKY81452 has one voltage linear regulator can be
|
||
|
|
programmed from 4.5V to 20V.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called sky81452-regulator.
|
||
|
|
|
||
|
|
config REGULATOR_SLG51000
|
||
|
|
tristate "Dialog Semiconductor SLG51000 regulators"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
Say y here to support for the Dialog Semiconductor SLG51000.
|
||
|
|
The SLG51000 is seven compact and customizable low dropout
|
||
|
|
regulators.
|
||
|
|
|
||
|
|
config REGULATOR_SM5703
|
||
|
|
tristate "Silicon Mitus SM5703 regulators"
|
||
|
|
depends on MFD_SM5703
|
||
|
|
help
|
||
|
|
This driver provides support for voltage regulators of SM5703
|
||
|
|
multi-function device.
|
||
|
|
|
||
|
|
config REGULATOR_STM32_BOOSTER
|
||
|
|
tristate "STMicroelectronics STM32 BOOSTER"
|
||
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports internal booster (3V3) embedded in some
|
||
|
|
STMicroelectronics STM32 chips. It can be used to supply ADC analog
|
||
|
|
input switches when vdda supply is below 2.7V.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called stm32-booster.
|
||
|
|
|
||
|
|
config REGULATOR_STM32_VREFBUF
|
||
|
|
tristate "STMicroelectronics STM32 VREFBUF"
|
||
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports STMicroelectronics STM32 VREFBUF (voltage
|
||
|
|
reference buffer) which can be used as voltage reference for
|
||
|
|
internal ADCs, DACs and also for external components through
|
||
|
|
dedicated Vref+ pin.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called stm32-vrefbuf.
|
||
|
|
|
||
|
|
config REGULATOR_STM32_PWR
|
||
|
|
bool "STMicroelectronics STM32 PWR"
|
||
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports internal regulators (1V1, 1V8, 3V3) in the
|
||
|
|
STMicroelectronics STM32 chips.
|
||
|
|
|
||
|
|
config REGULATOR_STPMIC1
|
||
|
|
tristate "STMicroelectronics STPMIC1 PMIC Regulators"
|
||
|
|
depends on MFD_STPMIC1
|
||
|
|
help
|
||
|
|
This driver supports STMicroelectronics STPMIC1 PMIC voltage
|
||
|
|
regulators and switches. The STPMIC1 regulators supply power to
|
||
|
|
an application processor as well as to external system
|
||
|
|
peripherals such as DDR, Flash memories and system devices.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called stpmic1_regulator.
|
||
|
|
|
||
|
|
config REGULATOR_TI_ABB
|
||
|
|
tristate "TI Adaptive Body Bias on-chip LDO"
|
||
|
|
depends on ARCH_OMAP || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Select this option to support Texas Instruments' on-chip Adaptive Body
|
||
|
|
Bias (ABB) LDO regulators. It is recommended that this option be
|
||
|
|
enabled on required TI SoC. Certain Operating Performance Points
|
||
|
|
on TI SoCs may be unstable without enabling this as it provides
|
||
|
|
device specific optimized bias to allow/optimize functionality.
|
||
|
|
|
||
|
|
config REGULATOR_STW481X_VMMC
|
||
|
|
bool "ST Microelectronics STW481X VMMC regulator"
|
||
|
|
depends on MFD_STW481X || COMPILE_TEST
|
||
|
|
default y if MFD_STW481X
|
||
|
|
help
|
||
|
|
This driver supports the internal VMMC regulator in the STw481x
|
||
|
|
PMIC chips.
|
||
|
|
|
||
|
|
config REGULATOR_SY7636A
|
||
|
|
tristate "Silergy SY7636A voltage regulator"
|
||
|
|
depends on MFD_SY7636A
|
||
|
|
help
|
||
|
|
This driver supports Silergy SY3686A voltage regulator.
|
||
|
|
|
||
|
|
config REGULATOR_SY8106A
|
||
|
|
tristate "Silergy SY8106A regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports SY8106A single output regulator.
|
||
|
|
|
||
|
|
config REGULATOR_SY8824X
|
||
|
|
tristate "Silergy SY8824C/SY8824E regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports SY8824C single output regulator.
|
||
|
|
|
||
|
|
config REGULATOR_SY8827N
|
||
|
|
tristate "Silergy SY8827N regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports SY8827N single output regulator.
|
||
|
|
|
||
|
|
config REGULATOR_TPS51632
|
||
|
|
tristate "TI TPS51632 Power Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS51632 voltage regulator chip.
|
||
|
|
The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
|
||
|
|
with Serial VID control and DVFS.
|
||
|
|
The voltage output can be configure through I2C interface or PWM
|
||
|
|
interface.
|
||
|
|
|
||
|
|
config REGULATOR_TPS6105X
|
||
|
|
tristate "TI TPS6105X Power regulators"
|
||
|
|
depends on TPS6105X
|
||
|
|
default y if TPS6105X
|
||
|
|
help
|
||
|
|
This driver supports TPS61050/TPS61052 voltage regulator chips.
|
||
|
|
It is a single boost converter primarily for white LEDs and
|
||
|
|
audio amplifiers.
|
||
|
|
|
||
|
|
config REGULATOR_TPS62360
|
||
|
|
tristate "TI TPS6236x Power Regulator"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS6236x voltage regulator chip. This
|
||
|
|
regulator is meant for processor core supply. This chip is
|
||
|
|
high-frequency synchronous step down dc-dc converter optimized
|
||
|
|
for battery-powered portable applications.
|
||
|
|
|
||
|
|
config REGULATOR_TPS6286X
|
||
|
|
tristate "TI TPS6286x Power Regulator"
|
||
|
|
depends on I2C && OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS6236x voltage regulator chips. These are
|
||
|
|
high-frequency synchronous step-down converters with an I2C
|
||
|
|
interface.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65023
|
||
|
|
tristate "TI TPS65023 Power regulators"
|
||
|
|
depends on I2C
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
|
||
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
||
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
||
|
|
|
||
|
|
config REGULATOR_TPS6507X
|
||
|
|
tristate "TI TPS6507X Power regulators"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides
|
||
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
||
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65086
|
||
|
|
tristate "TI TPS65086 Power regulators"
|
||
|
|
depends on MFD_TPS65086
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on
|
||
|
|
TI TPS65086 PMICs.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65090
|
||
|
|
tristate "TI TPS65090 Power regulator"
|
||
|
|
depends on MFD_TPS65090
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
TI TPS65090 PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65132
|
||
|
|
tristate "TI TPS65132 Dual Output Power regulators"
|
||
|
|
depends on I2C && GPIOLIB
|
||
|
|
select REGMAP_I2C
|
||
|
|
help
|
||
|
|
This driver supports TPS65132 single inductor - dual output
|
||
|
|
power supply specifically designed for display panels.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65217
|
||
|
|
tristate "TI TPS65217 Power regulators"
|
||
|
|
depends on MFD_TPS65217
|
||
|
|
help
|
||
|
|
This driver supports TPS65217 voltage regulator chips. TPS65217
|
||
|
|
provides three step-down converters and four general-purpose LDO
|
||
|
|
voltage regulators. It supports software based voltage control
|
||
|
|
for different voltage domains
|
||
|
|
|
||
|
|
config REGULATOR_TPS65218
|
||
|
|
tristate "TI TPS65218 Power regulators"
|
||
|
|
depends on MFD_TPS65218 && OF
|
||
|
|
help
|
||
|
|
This driver supports TPS65218 voltage regulator chips. TPS65218
|
||
|
|
provides six step-down converters and one general-purpose LDO
|
||
|
|
voltage regulators. It supports software based voltage control
|
||
|
|
for different voltage domains
|
||
|
|
|
||
|
|
config REGULATOR_TPS65219
|
||
|
|
tristate "TI TPS65219 Power regulators"
|
||
|
|
depends on MFD_TPS65219 && OF
|
||
|
|
help
|
||
|
|
This driver supports TPS65219 voltage regulator chips.
|
||
|
|
TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs
|
||
|
|
voltage regulators. It supports software based voltage control
|
||
|
|
for different voltage domains.
|
||
|
|
|
||
|
|
config REGULATOR_TPS6524X
|
||
|
|
tristate "TI TPS6524X Power regulators"
|
||
|
|
depends on SPI
|
||
|
|
help
|
||
|
|
This driver supports TPS6524X voltage regulator chips. TPS6524X
|
||
|
|
provides three step-down converters and two general-purpose LDO
|
||
|
|
voltage regulators. This device is interfaced using a customized
|
||
|
|
serial interface currently supported on the sequencer serial
|
||
|
|
port controller.
|
||
|
|
|
||
|
|
config REGULATOR_TPS6586X
|
||
|
|
tristate "TI TPS6586X Power regulators"
|
||
|
|
depends on MFD_TPS6586X
|
||
|
|
help
|
||
|
|
This driver supports TPS6586X voltage regulator chips.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65910
|
||
|
|
tristate "TI TPS65910/TPS65911 Power Regulators"
|
||
|
|
depends on MFD_TPS65910
|
||
|
|
help
|
||
|
|
This driver supports TPS65910/TPS65911 voltage regulator chips.
|
||
|
|
|
||
|
|
config REGULATOR_TPS65912
|
||
|
|
tristate "TI TPS65912 Power regulator"
|
||
|
|
depends on MFD_TPS65912
|
||
|
|
help
|
||
|
|
This driver supports TPS65912 voltage regulator chip.
|
||
|
|
|
||
|
|
config REGULATOR_TPS68470
|
||
|
|
tristate "TI TPS68470 PMIC Regulators Driver"
|
||
|
|
depends on INTEL_SKL_INT3472 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver adds support for the TPS68470 PMIC to register
|
||
|
|
regulators against the usual framework.
|
||
|
|
|
||
|
|
The module will be called "tps68470-regulator".
|
||
|
|
|
||
|
|
config REGULATOR_TWL4030
|
||
|
|
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
|
||
|
|
depends on TWL4030_CORE
|
||
|
|
help
|
||
|
|
This driver supports the voltage regulators provided by
|
||
|
|
this family of companion chips.
|
||
|
|
|
||
|
|
config REGULATOR_UNIPHIER
|
||
|
|
tristate "UniPhier regulator driver"
|
||
|
|
depends on ARCH_UNIPHIER || COMPILE_TEST
|
||
|
|
depends on OF
|
||
|
|
select REGMAP_MMIO
|
||
|
|
default ARCH_UNIPHIER
|
||
|
|
help
|
||
|
|
Support for regulators implemented on Socionext UniPhier SoCs.
|
||
|
|
|
||
|
|
config REGULATOR_VCTRL
|
||
|
|
tristate "Voltage controlled regulators"
|
||
|
|
depends on OF
|
||
|
|
help
|
||
|
|
This driver provides support for voltage regulators whose output
|
||
|
|
voltage is controlled by the voltage of another regulator.
|
||
|
|
|
||
|
|
config REGULATOR_VEXPRESS
|
||
|
|
tristate "Versatile Express regulators"
|
||
|
|
depends on VEXPRESS_CONFIG
|
||
|
|
help
|
||
|
|
This driver provides support for voltage regulators available
|
||
|
|
on the ARM Ltd's Versatile Express platform.
|
||
|
|
|
||
|
|
config REGULATOR_VQMMC_IPQ4019
|
||
|
|
tristate "IPQ4019 VQMMC SD LDO regulator support"
|
||
|
|
depends on ARCH_QCOM
|
||
|
|
help
|
||
|
|
This driver provides support for the VQMMC LDO I/0
|
||
|
|
voltage regulator of the IPQ4019 SD/EMMC controller.
|
||
|
|
|
||
|
|
config REGULATOR_WM831X
|
||
|
|
tristate "Wolfson Microelectronics WM831x PMIC regulators"
|
||
|
|
depends on MFD_WM831X
|
||
|
|
help
|
||
|
|
Support the voltage and current regulators of the WM831x series
|
||
|
|
of PMIC devices.
|
||
|
|
|
||
|
|
config REGULATOR_WM8350
|
||
|
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
|
||
|
|
depends on MFD_WM8350
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage and current regulators
|
||
|
|
of the WM8350 AudioPlus PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_WM8400
|
||
|
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
|
||
|
|
depends on MFD_WM8400
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators of the
|
||
|
|
WM8400 AudioPlus PMIC.
|
||
|
|
|
||
|
|
config REGULATOR_WM8994
|
||
|
|
tristate "Wolfson Microelectronics WM8994 CODEC"
|
||
|
|
depends on MFD_WM8994
|
||
|
|
help
|
||
|
|
This driver provides support for the voltage regulators on the
|
||
|
|
WM8994 CODEC.
|
||
|
|
|
||
|
|
config REGULATOR_QCOM_LABIBB
|
||
|
|
tristate "QCOM LAB/IBB regulator support"
|
||
|
|
depends on SPMI || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports Qualcomm's LAB/IBB regulators present on the
|
||
|
|
Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
|
||
|
|
based PMIC implementations. LAB can be used as positive
|
||
|
|
boost regulator and IBB can be used as a negative boost regulator
|
||
|
|
for LCD display panel.
|
||
|
|
|
||
|
|
endif
|