kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/usb/host/xhci-hub.c

1998 lines
56 KiB
C
Raw Permalink Normal View History

Initial commit
2023-08-30 17:53:23 +02:00
// SPDX-License-Identifier: GPL-2.0
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <linux/bitfield.h>
#include "xhci.h"
#include "xhci-trace.h"
#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_PE)
/* Default sublink speed attribute of each lane */
static u32 ssp_cap_default_ssa[] = {
0x00050034, /* USB 3.0 SS Gen1x1 id:4 symmetric rx 5Gbps */
0x000500b4, /* USB 3.0 SS Gen1x1 id:4 symmetric tx 5Gbps */
0x000a4035, /* USB 3.1 SSP Gen2x1 id:5 symmetric rx 10Gbps */
0x000a40b5, /* USB 3.1 SSP Gen2x1 id:5 symmetric tx 10Gbps */
0x00054036, /* USB 3.2 SSP Gen1x2 id:6 symmetric rx 5Gbps */
0x000540b6, /* USB 3.2 SSP Gen1x2 id:6 symmetric tx 5Gbps */
0x000a4037, /* USB 3.2 SSP Gen2x2 id:7 symmetric rx 10Gbps */
0x000a40b7, /* USB 3.2 SSP Gen2x2 id:7 symmetric tx 10Gbps */
};
static int xhci_create_usb3x_bos_desc(struct xhci_hcd *xhci, char *buf,
u16 wLength)
{
struct usb_bos_descriptor *bos;
struct usb_ss_cap_descriptor *ss_cap;
struct usb_ssp_cap_descriptor *ssp_cap;
struct xhci_port_cap *port_cap = NULL;
u16 bcdUSB;
u32 reg;
u32 min_rate = 0;
u8 min_ssid;
u8 ssac;
u8 ssic;
int offset;
int i;
/* BOS descriptor */
bos = (struct usb_bos_descriptor *)buf;
bos->bLength = USB_DT_BOS_SIZE;
bos->bDescriptorType = USB_DT_BOS;
bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE +
USB_DT_USB_SS_CAP_SIZE);
bos->bNumDeviceCaps = 1;
/* Create the descriptor for port with the highest revision */
for (i = 0; i < xhci->num_port_caps; i++) {
u8 major = xhci->port_caps[i].maj_rev;
u8 minor = xhci->port_caps[i].min_rev;
u16 rev = (major << 8) | minor;
if (i == 0 || bcdUSB < rev) {
bcdUSB = rev;
port_cap = &xhci->port_caps[i];
}
}
if (bcdUSB >= 0x0310) {
if (port_cap->psi_count) {
u8 num_sym_ssa = 0;
for (i = 0; i < port_cap->psi_count; i++) {
if ((port_cap->psi[i] & PLT_MASK) == PLT_SYM)
num_sym_ssa++;
}
ssac = port_cap->psi_count + num_sym_ssa - 1;
ssic = port_cap->psi_uid_count - 1;
} else {
if (bcdUSB >= 0x0320)
ssac = 7;
else
ssac = 3;
ssic = (ssac + 1) / 2 - 1;
}
bos->bNumDeviceCaps++;
bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE +
USB_DT_USB_SS_CAP_SIZE +
USB_DT_USB_SSP_CAP_SIZE(ssac));
}
if (wLength < USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE)
return wLength;
/* SuperSpeed USB Device Capability */
ss_cap = (struct usb_ss_cap_descriptor *)&buf[USB_DT_BOS_SIZE];
ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
ss_cap->bmAttributes = 0; /* set later */
ss_cap->wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION);
ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
ss_cap->bU1devExitLat = 0; /* set later */
ss_cap->bU2DevExitLat = 0; /* set later */
reg = readl(&xhci->cap_regs->hcc_params);
if (HCC_LTC(reg))
ss_cap->bmAttributes |= USB_LTM_SUPPORT;
if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
reg = readl(&xhci->cap_regs->hcs_params3);
ss_cap->bU1devExitLat = HCS_U1_LATENCY(reg);
ss_cap->bU2DevExitLat = cpu_to_le16(HCS_U2_LATENCY(reg));
}
if (wLength < le16_to_cpu(bos->wTotalLength))
return wLength;
if (bcdUSB < 0x0310)
return le16_to_cpu(bos->wTotalLength);
ssp_cap = (struct usb_ssp_cap_descriptor *)&buf[USB_DT_BOS_SIZE +
USB_DT_USB_SS_CAP_SIZE];
ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac);
ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
ssp_cap->bReserved = 0;
ssp_cap->wReserved = 0;
ssp_cap->bmAttributes =
cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) |
FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic));
if (!port_cap->psi_count) {
for (i = 0; i < ssac + 1; i++)
ssp_cap->bmSublinkSpeedAttr[i] =
cpu_to_le32(ssp_cap_default_ssa[i]);
min_ssid = 4;
goto out;
}
offset = 0;
for (i = 0; i < port_cap->psi_count; i++) {
u32 psi;
u32 attr;
u8 ssid;
u8 lp;
u8 lse;
u8 psie;
u16 lane_mantissa;
u16 psim;
u16 plt;
psi = port_cap->psi[i];
ssid = XHCI_EXT_PORT_PSIV(psi);
lp = XHCI_EXT_PORT_LP(psi);
psie = XHCI_EXT_PORT_PSIE(psi);
psim = XHCI_EXT_PORT_PSIM(psi);
plt = psi & PLT_MASK;
lse = psie;
lane_mantissa = psim;
/* Shift to Gbps and set SSP Link Protocol if 10Gpbs */
for (; psie < USB_SSP_SUBLINK_SPEED_LSE_GBPS; psie++)
psim /= 1000;
if (!min_rate || psim < min_rate) {
min_ssid = ssid;
min_rate = psim;
}
/* Some host controllers don't set the link protocol for SSP */
if (psim >= 10)
lp = USB_SSP_SUBLINK_SPEED_LP_SSP;
/*
* PSIM and PSIE represent the total speed of PSI. The BOS
* descriptor SSP sublink speed attribute lane mantissa
* describes the lane speed. E.g. PSIM and PSIE for gen2x2
* is 20Gbps, but the BOS descriptor lane speed mantissa is
* 10Gbps. Check and modify the mantissa value to match the
* lane speed.
*/
if (bcdUSB == 0x0320 && plt == PLT_SYM) {
/*
* The PSI dword for gen1x2 and gen2x1 share the same
* values. But the lane speed for gen1x2 is 5Gbps while
* gen2x1 is 10Gbps. If the previous PSI dword SSID is
* 5 and the PSIE and PSIM match with SSID 6, let's
* assume that the controller follows the default speed
* id with SSID 6 for gen1x2.
*/
if (ssid == 6 && psie == 3 && psim == 10 && i) {
u32 prev = port_cap->psi[i - 1];
if ((prev & PLT_MASK) == PLT_SYM &&
XHCI_EXT_PORT_PSIV(prev) == 5 &&
XHCI_EXT_PORT_PSIE(prev) == 3 &&
XHCI_EXT_PORT_PSIM(prev) == 10) {
lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS;
lane_mantissa = 5;
}
}
if (psie == 3 && psim > 10) {
lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS;
lane_mantissa = 10;
}
}
attr = (FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ssid) |
FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, lp) |
FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, lse) |
FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, lane_mantissa));
switch (plt) {
case PLT_SYM:
attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
USB_SSP_SUBLINK_SPEED_ST_SYM_RX);
ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
attr &= ~USB_SSP_SUBLINK_SPEED_ST;
attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
USB_SSP_SUBLINK_SPEED_ST_SYM_TX);
ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
break;
case PLT_ASYM_RX:
attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
USB_SSP_SUBLINK_SPEED_ST_ASYM_RX);
ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
break;
case PLT_ASYM_TX:
attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
USB_SSP_SUBLINK_SPEED_ST_ASYM_TX);
ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
break;
}
}
out:
ssp_cap->wFunctionalitySupport =
cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID,
min_ssid) |
FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
return le16_to_cpu(bos->wTotalLength);
}
static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc, int ports)
{
u16 temp;
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
temp = 0;
/* Bits 1:0 - support per-port power switching, or power always on */
if (HCC_PPC(xhci->hcc_params))
temp |= HUB_CHAR_INDV_PORT_LPSM;
else
temp |= HUB_CHAR_NO_LPSM;
/* Bit 2 - root hubs are not part of a compound device */
/* Bits 4:3 - individual port over current protection */
temp |= HUB_CHAR_INDV_PORT_OCPM;
/* Bits 6:5 - no TTs in root ports */
/* Bit 7 - no port indicators */
desc->wHubCharacteristics = cpu_to_le16(temp);
}
/* Fill in the USB 2.0 roothub descriptor */
static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
int ports;
u16 temp;
__u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
u32 portsc;
unsigned int i;
struct xhci_hub *rhub;
rhub = &xhci->usb2_rhub;
ports = rhub->num_ports;
xhci_common_hub_descriptor(xhci, desc, ports);
desc->bDescriptorType = USB_DT_HUB;
temp = 1 + (ports / 8);
desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.8 says 20ms */
/* The Device Removable bits are reported on a byte granularity.
* If the port doesn't exist within that byte, the bit is set to 0.
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
portsc = readl(rhub->ports[i]->addr);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
if (portsc & PORT_DEV_REMOVE)
/* This math is hairy because bit 0 of DeviceRemovable
* is reserved, and bit 1 is for port 1, etc.
*/
port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
}
/* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
* ports on it. The USB 2.0 specification says that there are two
* variable length fields at the end of the hub descriptor:
* DeviceRemovable and PortPwrCtrlMask. But since we can have less than
* USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
* to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to
* 0xFF, so we initialize the both arrays (DeviceRemovable and
* PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each
* set of ports that actually exist.
*/
memset(desc->u.hs.DeviceRemovable, 0xff,
sizeof(desc->u.hs.DeviceRemovable));
memset(desc->u.hs.PortPwrCtrlMask, 0xff,
sizeof(desc->u.hs.PortPwrCtrlMask));
for (i = 0; i < (ports + 1 + 7) / 8; i++)
memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
sizeof(__u8));
}
/* Fill in the USB 3.0 roothub descriptor */
static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
int ports;
u16 port_removable;
u32 portsc;
unsigned int i;
struct xhci_hub *rhub;
rhub = &xhci->usb3_rhub;
ports = rhub->num_ports;
xhci_common_hub_descriptor(xhci, desc, ports);
desc->bDescriptorType = USB_DT_SS_HUB;
desc->bDescLength = USB_DT_SS_HUB_SIZE;
desc->bPwrOn2PwrGood = 50; /* usb 3.1 may fail if less than 100ms */
/* header decode latency should be zero for roothubs,
* see section 4.23.5.2.
*/
desc->u.ss.bHubHdrDecLat = 0;
desc->u.ss.wHubDelay = 0;
port_removable = 0;
/* bit 0 is reserved, bit 1 is for port 1, etc. */
for (i = 0; i < ports; i++) {
portsc = readl(rhub->ports[i]->addr);
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
}
static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
if (hcd->speed >= HCD_USB3)
xhci_usb3_hub_descriptor(hcd, xhci, desc);
else
xhci_usb2_hub_descriptor(hcd, xhci, desc);
}
static unsigned int xhci_port_speed(unsigned int port_status)
{
if (DEV_LOWSPEED(port_status))
return USB_PORT_STAT_LOW_SPEED;
if (DEV_HIGHSPEED(port_status))
return USB_PORT_STAT_HIGH_SPEED;
/*
* FIXME: Yes, we should check for full speed, but the core uses that as
* a default in portspeed() in usb/core/hub.c (which is the only place
* USB_PORT_STAT_*_SPEED is used).
*/
return 0;
}
/*
* These bits are Read Only (RO) and should be saved and written to the
* registers: 0, 3, 10:13, 30
* connect status, over-current status, port speed, and device removable.
* connect status and port speed are also sticky - meaning they're in
* the AUX well and they aren't changed by a hot, warm, or cold reset.
*/
#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
/*
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
* bits 5:8, 9, 14:15, 25:27
* link state, port power, port indicator state, "wake on" enable state
*/
#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
/*
* These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
* bit 4 (port reset)
*/
#define XHCI_PORT_RW1S ((1<<4))
/*
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
* bits 1, 17, 18, 19, 20, 21, 22, 23
* port enable/disable, and
* change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
* over-current, reset, link state, and L1 change
*/
#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
/*
* Bit 16 is RW, and writing a '1' to it causes the link state control to be
* latched in
*/
#define XHCI_PORT_RW ((1<<16))
/*
* These bits are Reserved Zero (RsvdZ) and zero should be written to them:
* bits 2, 24, 28:31
*/
#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
/**
* xhci_port_state_to_neutral() - Clean up read portsc value back into writeable
* @state: u32 port value read from portsc register to be cleanup up
*
* Given a port state, this function returns a value that would result in the
* port being in the same state, if the value was written to the port status
* control register.
* Save Read Only (RO) bits and save read/write bits where
* writing a 0 clears the bit and writing a 1 sets the bit (RWS).
* For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
*
* Return: u32 value that can be written back to portsc register without
* changing port state.
*/
u32 xhci_port_state_to_neutral(u32 state)
{
/* Save read-only status and port state */
return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
}
EXPORT_SYMBOL_GPL(xhci_port_state_to_neutral);
/**
* xhci_find_slot_id_by_port() - Find slot id of a usb device on a roothub port
* @hcd: pointer to hcd of the roothub
* @xhci: pointer to xhci structure
* @port: one-based port number of the port in this roothub.
*
* Return: Slot id of the usb device connected to the root port, 0 if not found
*/
int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 port)
{
int slot_id;
int i;
enum usb_device_speed speed;
slot_id = 0;
for (i = 0; i < MAX_HC_SLOTS; i++) {
if (!xhci->devs[i] || !xhci->devs[i]->udev)
continue;
speed = xhci->devs[i]->udev->speed;
if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
&& xhci->devs[i]->fake_port == port) {
slot_id = i;
break;
}
}
return slot_id;
}
EXPORT_SYMBOL_GPL(xhci_find_slot_id_by_port);
/*
* Stop device
* It issues stop endpoint command for EP 0 to 30. And wait the last command
* to complete.
* suspend will set to 1, if suspend bit need to set in command.
*/
static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
{
struct xhci_virt_device *virt_dev;
struct xhci_command *cmd;
unsigned long flags;
int ret;
int i;
ret = 0;
virt_dev = xhci->devs[slot_id];
if (!virt_dev)
return -ENODEV;
trace_xhci_stop_device(virt_dev);
cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
if (!cmd)
return -ENOMEM;
spin_lock_irqsave(&xhci->lock, flags);
for (i = LAST_EP_INDEX; i > 0; i--) {
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
struct xhci_ep_ctx *ep_ctx;
struct xhci_command *command;
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i);
/* Check ep is running, required by AMD SNPS 3.1 xHC */
if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING)
continue;
command = xhci_alloc_command(xhci, false, GFP_NOWAIT);
if (!command) {
spin_unlock_irqrestore(&xhci->lock, flags);
ret = -ENOMEM;
goto cmd_cleanup;
}
ret = xhci_queue_stop_endpoint(xhci, command, slot_id,
i, suspend);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_free_command(xhci, command);
goto cmd_cleanup;
}
}
}
ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
goto cmd_cleanup;
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
/* Wait for last stop endpoint command to finish */
wait_for_completion(cmd->completion);
if (cmd->status == COMP_COMMAND_ABORTED ||
cmd->status == COMP_COMMAND_RING_STOPPED) {
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
ret = -ETIME;
}
cmd_cleanup:
xhci_free_command(xhci, cmd);
return ret;
}
/*
* Ring device, it rings the all doorbells unconditionally.
*/
void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
{
int i, s;
struct xhci_virt_ep *ep;
for (i = 0; i < LAST_EP_INDEX + 1; i++) {
ep = &xhci->devs[slot_id]->eps[i];
if (ep->ep_state & EP_HAS_STREAMS) {
for (s = 1; s < ep->stream_info->num_streams; s++)
xhci_ring_ep_doorbell(xhci, slot_id, i, s);
} else if (ep->ring && ep->ring->dequeue) {
xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
}
}
return;
}
static void xhci_disable_port(struct xhci_hcd *xhci, struct xhci_port *port)
{
struct usb_hcd *hcd;
u32 portsc;
hcd = port->rhub->hcd;
/* Don't allow the USB core to disable SuperSpeed ports. */
if (hcd->speed >= HCD_USB3) {
xhci_dbg(xhci, "Ignoring request to disable SuperSpeed port.\n");
return;
}
if (xhci->quirks & XHCI_BROKEN_PORT_PED) {
xhci_dbg(xhci,
"Broken Port Enabled/Disabled, ignoring port disable request.\n");
return;
}
portsc = readl(port->addr);
portsc = xhci_port_state_to_neutral(portsc);
/* Write 1 to disable the port */
writel(portsc | PORT_PE, port->addr);
portsc = readl(port->addr);
xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, portsc);
}
static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
u16 wIndex, __le32 __iomem *addr, u32 port_status)
{
char *port_change_bit;
u32 status;
switch (wValue) {
case USB_PORT_FEAT_C_RESET:
status = PORT_RC;
port_change_bit = "reset";
break;
case USB_PORT_FEAT_C_BH_PORT_RESET:
status = PORT_WRC;
port_change_bit = "warm(BH) reset";
break;
case USB_PORT_FEAT_C_CONNECTION:
status = PORT_CSC;
port_change_bit = "connect";
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
status = PORT_OCC;
port_change_bit = "over-current";
break;
case USB_PORT_FEAT_C_ENABLE:
status = PORT_PEC;
port_change_bit = "enable/disable";
break;
case USB_PORT_FEAT_C_SUSPEND:
status = PORT_PLC;
port_change_bit = "suspend/resume";
break;
case USB_PORT_FEAT_C_PORT_LINK_STATE:
status = PORT_PLC;
port_change_bit = "link state";
break;
case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
status = PORT_CEC;
port_change_bit = "config error";
break;
default:
/* Should never happen */
return;
}
/* Change bits are all write 1 to clear */
writel(port_status | status, addr);
port_status = readl(addr);
xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
wIndex + 1, port_change_bit, port_status);
}
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
if (hcd->speed >= HCD_USB3)
return &xhci->usb3_rhub;
return &xhci->usb2_rhub;
}
/*
* xhci_set_port_power() must be called with xhci->lock held.
* It will release and re-aquire the lock while calling ACPI
* method.
*/
static void xhci_set_port_power(struct xhci_hcd *xhci, struct xhci_port *port,
bool on, unsigned long *flags)
__must_hold(&xhci->lock)
{
struct usb_hcd *hcd;
u32 temp;
hcd = port->rhub->hcd;
temp = readl(port->addr);
xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, on ? "ON" : "OFF", temp);
temp = xhci_port_state_to_neutral(temp);
if (on) {
/* Power on */
writel(temp | PORT_POWER, port->addr);
readl(port->addr);
} else {
/* Power off */
writel(temp & ~PORT_POWER, port->addr);
}
spin_unlock_irqrestore(&xhci->lock, *flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
port->hcd_portnum);
if (temp)
usb_acpi_set_power_state(hcd->self.root_hub,
port->hcd_portnum, on);
spin_lock_irqsave(&xhci->lock, *flags);
}
static void xhci_port_set_test_mode(struct xhci_hcd *xhci,
u16 test_mode, u16 wIndex)
{
u32 temp;
struct xhci_port *port;
/* xhci only supports test mode for usb2 ports */
port = xhci->usb2_rhub.ports[wIndex];
temp = readl(port->addr + PORTPMSC);
temp |= test_mode << PORT_TEST_MODE_SHIFT;
writel(temp, port->addr + PORTPMSC);
xhci->test_mode = test_mode;
if (test_mode == USB_TEST_FORCE_ENABLE)
xhci_start(xhci);
}
static int xhci_enter_test_mode(struct xhci_hcd *xhci,
u16 test_mode, u16 wIndex, unsigned long *flags)
__must_hold(&xhci->lock)
{
int i, retval;
/* Disable all Device Slots */
xhci_dbg(xhci, "Disable all slots\n");
spin_unlock_irqrestore(&xhci->lock, *flags);
for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
if (!xhci->devs[i])
continue;
retval = xhci_disable_slot(xhci, i);
xhci_free_virt_device(xhci, i);
if (retval)
xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
i, retval);
}
spin_lock_irqsave(&xhci->lock, *flags);
/* Put all ports to the Disable state by clear PP */
xhci_dbg(xhci, "Disable all port (PP = 0)\n");
/* Power off USB3 ports*/
for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
xhci_set_port_power(xhci, xhci->usb3_rhub.ports[i], false, flags);
/* Power off USB2 ports*/
for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
xhci_set_port_power(xhci, xhci->usb2_rhub.ports[i], false, flags);
/* Stop the controller */
xhci_dbg(xhci, "Stop controller\n");
retval = xhci_halt(xhci);
if (retval)
return retval;
/* Disable runtime PM for test mode */
pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller);
/* Set PORTPMSC.PTC field to enter selected test mode */
/* Port is selected by wIndex. port_id = wIndex + 1 */
xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
test_mode, wIndex + 1);
xhci_port_set_test_mode(xhci, test_mode, wIndex);
return retval;
}
static int xhci_exit_test_mode(struct xhci_hcd *xhci)
{
int retval;
if (!xhci->test_mode) {
xhci_err(xhci, "Not in test mode, do nothing.\n");
return 0;
}
if (xhci->test_mode == USB_TEST_FORCE_ENABLE &&
!(xhci->xhc_state & XHCI_STATE_HALTED)) {
retval = xhci_halt(xhci);
if (retval)
return retval;
}
pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
xhci->test_mode = 0;
return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
}
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
u32 link_state)
{
u32 temp;
u32 portsc;
portsc = readl(port->addr);
temp = xhci_port_state_to_neutral(portsc);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
writel(temp, port->addr);
xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",
port->rhub->hcd->self.busnum, port->hcd_portnum + 1,
portsc, temp);
}
static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
struct xhci_port *port, u16 wake_mask)
{
u32 temp;
temp = readl(port->addr);
temp = xhci_port_state_to_neutral(temp);
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
temp |= PORT_WKCONN_E;
else
temp &= ~PORT_WKCONN_E;
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
temp |= PORT_WKDISC_E;
else
temp &= ~PORT_WKDISC_E;
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
temp |= PORT_WKOC_E;
else
temp &= ~PORT_WKOC_E;
writel(temp, port->addr);
}
/* Test and clear port RWC bit */
void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
u32 port_bit)
{
u32 temp;
temp = readl(port->addr);
if (temp & port_bit) {
temp = xhci_port_state_to_neutral(temp);
temp |= port_bit;
writel(temp, port->addr);
}
}
/* Updates Link Status for super Speed port */
static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
u32 *status, u32 status_reg)
{
u32 pls = status_reg & PORT_PLS_MASK;
/* When the CAS bit is set then warm reset
* should be performed on port
*/
if (status_reg & PORT_CAS) {
/* The CAS bit can be set while the port is
* in any link state.
* Only roothubs have CAS bit, so we
* pretend to be in compliance mode
* unless we're already in compliance
* or the inactive state.
*/
if (pls != USB_SS_PORT_LS_COMP_MOD &&
pls != USB_SS_PORT_LS_SS_INACTIVE) {
pls = USB_SS_PORT_LS_COMP_MOD;
}
/* Return also connection bit -
* hub state machine resets port
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
} else {
/*
* Resume state is an xHCI internal state. Do not report it to
* usb core, instead, pretend to be U3, thus usb core knows
* it's not ready for transfer.
*/
if (pls == XDEV_RESUME) {
*status |= USB_SS_PORT_LS_U3;
return;
}
/*
* If CAS bit isn't set but the Port is already at
* Compliance Mode, fake a connection so the USB core
* notices the Compliance state and resets the port.
* This resolves an issue generated by the SN65LVPE502CP
* in which sometimes the port enters compliance mode
* caused by a delay on the host-device negotiation.
*/
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
(pls == USB_SS_PORT_LS_COMP_MOD))
pls |= USB_PORT_STAT_CONNECTION;
}
/* update status field */
*status |= pls;
}
/*
* Function for Compliance Mode Quirk.
*
* This Function verifies if all xhc USB3 ports have entered U0, if so,
* the compliance mode timer is deleted. A port won't enter
* compliance mode if it has previously entered U0.
*/
static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
u16 wIndex)
{
u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1);
bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
return;
if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
xhci->port_status_u0 |= 1 << wIndex;
if (xhci->port_status_u0 == all_ports_seen_u0) {
del_timer_sync(&xhci->comp_mode_recovery_timer);
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"All USB3 ports have entered U0 already!");
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Compliance Mode Recovery Timer Deleted.");
}
}
}
static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
u32 portsc,
unsigned long *flags)
{
struct xhci_bus_state *bus_state;
struct xhci_hcd *xhci;
struct usb_hcd *hcd;
int slot_id;
u32 wIndex;
hcd = port->rhub->hcd;
bus_state = &port->rhub->bus_state;
xhci = hcd_to_xhci(hcd);
wIndex = port->hcd_portnum;
if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) {
return -EINVAL;
}
/* did port event handler already start resume timing? */
if (!port->resume_timestamp) {
/* If not, maybe we are in a host initated resume? */
if (test_bit(wIndex, &bus_state->resuming_ports)) {
/* Host initated resume doesn't time the resume
* signalling using resume_done[].
* It manually sets RESUME state, sleeps 20ms
* and sets U0 state. This should probably be
* changed, but not right now.
*/
} else {
/* port resume was discovered now and here,
* start resume timing
*/
unsigned long timeout = jiffies +
msecs_to_jiffies(USB_RESUME_TIMEOUT);
set_bit(wIndex, &bus_state->resuming_ports);
port->resume_timestamp = timeout;
mod_timer(&hcd->rh_timer, timeout);
usb_hcd_start_port_resume(&hcd->self, wIndex);
}
/* Has resume been signalled for USB_RESUME_TIME yet? */
} else if (time_after_eq(jiffies, port->resume_timestamp)) {
int time_left;
xhci_dbg(xhci, "resume USB2 port %d-%d\n",
hcd->self.busnum, wIndex + 1);
port->resume_timestamp = 0;
clear_bit(wIndex, &bus_state->resuming_ports);
reinit_completion(&port->rexit_done);
port->rexit_active = true;
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
xhci_set_link_state(xhci, port, XDEV_U0);
spin_unlock_irqrestore(&xhci->lock, *flags);
time_left = wait_for_completion_timeout(
&port->rexit_done,
msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS));
spin_lock_irqsave(&xhci->lock, *flags);
if (time_left) {
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
return -ENODEV;
}
xhci_ring_device(xhci, slot_id);
} else {
int port_status = readl(port->addr);
xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
hcd->self.busnum, wIndex + 1, port_status);
/*
* keep rexit_active set if U0 transition failed so we
* know to report PORT_STAT_SUSPEND status back to
* usbcore. It will be cleared later once the port is
* out of RESUME/U3 state
*/
}
usb_hcd_end_port_resume(&hcd->self, wIndex);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
}
return 0;
}
static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
{
u32 ext_stat = 0;
int speed_id;
/* only support rx and tx lane counts of 1 in usb3.1 spec */
speed_id = DEV_PORT_SPEED(raw_port_status);
ext_stat |= speed_id; /* bits 3:0, RX speed id */
ext_stat |= speed_id << 4; /* bits 7:4, TX speed id */
ext_stat |= PORT_RX_LANES(port_li) << 8; /* bits 11:8 Rx lane count */
ext_stat |= PORT_TX_LANES(port_li) << 12; /* bits 15:12 Tx lane count */
return ext_stat;
}
static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status,
u32 portsc)
{
struct xhci_bus_state *bus_state;
struct xhci_hcd *xhci;
struct usb_hcd *hcd;
u32 link_state;
u32 portnum;
bus_state = &port->rhub->bus_state;
xhci = hcd_to_xhci(port->rhub->hcd);
hcd = port->rhub->hcd;
link_state = portsc & PORT_PLS_MASK;
portnum = port->hcd_portnum;
/* USB3 specific wPortChange bits
*
* Port link change with port in resume state should not be
* reported to usbcore, as this is an internal state to be
* handled by xhci driver. Reporting PLC to usbcore may
* cause usbcore clearing PLC first and port change event
* irq won't be generated.
*/
if (portsc & PORT_PLC && (link_state != XDEV_RESUME))
*status |= USB_PORT_STAT_C_LINK_STATE << 16;
if (portsc & PORT_WRC)
*status |= USB_PORT_STAT_C_BH_RESET << 16;
if (portsc & PORT_CEC)
*status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
/* USB3 specific wPortStatus bits */
if (portsc & PORT_POWER) {
*status |= USB_SS_PORT_STAT_POWER;
/* link state handling */
if (link_state == XDEV_U0)
bus_state->suspended_ports &= ~(1 << portnum);
}
/* remote wake resume signaling complete */
if (bus_state->port_remote_wakeup & (1 << portnum) &&
link_state != XDEV_RESUME &&
link_state != XDEV_RECOVERY) {
bus_state->port_remote_wakeup &= ~(1 << portnum);
usb_hcd_end_port_resume(&hcd->self, portnum);
}
xhci_hub_report_usb3_link_state(xhci, status, portsc);
xhci_del_comp_mod_timer(xhci, portsc, portnum);
}
static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
u32 portsc, unsigned long *flags)
{
struct xhci_bus_state *bus_state;
u32 link_state;
u32 portnum;
int err;
bus_state = &port->rhub->bus_state;
link_state = portsc & PORT_PLS_MASK;
portnum = port->hcd_portnum;
/* USB2 wPortStatus bits */
if (portsc & PORT_POWER) {
*status |= USB_PORT_STAT_POWER;
/* link state is only valid if port is powered */
if (link_state == XDEV_U3)
*status |= USB_PORT_STAT_SUSPEND;
if (link_state == XDEV_U2)
*status |= USB_PORT_STAT_L1;
if (link_state == XDEV_U0) {
if (bus_state->suspended_ports & (1 << portnum)) {
bus_state->suspended_ports &= ~(1 << portnum);
bus_state->port_c_suspend |= 1 << portnum;
}
}
if (link_state == XDEV_RESUME) {
err = xhci_handle_usb2_port_link_resume(port, portsc,
flags);
if (err < 0)
*status = 0xffffffff;
else if (port->resume_timestamp || port->rexit_active)
*status |= USB_PORT_STAT_SUSPEND;
}
}
/*
* Clear usb2 resume signalling variables if port is no longer suspended
* or resuming. Port either resumed to U0/U1/U2, disconnected, or in a
* error state. Resume related variables should be cleared in all those cases.
*/
if (link_state != XDEV_U3 && link_state != XDEV_RESUME) {
if (port->resume_timestamp ||
test_bit(portnum, &bus_state->resuming_ports)) {
port->resume_timestamp = 0;
clear_bit(portnum, &bus_state->resuming_ports);
usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum);
}
port->rexit_active = 0;
}
}
/*
* Converts a raw xHCI port status into the format that external USB 2.0 or USB
* 3.0 hubs use.
*
* Possible side effects:
* - Mark a port as being done with device resume,
* and ring the endpoint doorbells.
* - Stop the Synopsys redriver Compliance Mode polling.
* - Drop and reacquire the xHCI lock, in order to wait for port resume.
*/
static u32 xhci_get_port_status(struct usb_hcd *hcd,
struct xhci_bus_state *bus_state,
u16 wIndex, u32 raw_port_status,
unsigned long *flags)
__releases(&xhci->lock)
__acquires(&xhci->lock)
{
u32 status = 0;
struct xhci_hub *rhub;
struct xhci_port *port;
rhub = xhci_get_rhub(hcd);
port = rhub->ports[wIndex];
/* common wPortChange bits */
if (raw_port_status & PORT_CSC)
status |= USB_PORT_STAT_C_CONNECTION << 16;
if (raw_port_status & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
if ((raw_port_status & PORT_OCC))
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
if ((raw_port_status & PORT_RC))
status |= USB_PORT_STAT_C_RESET << 16;
/* common wPortStatus bits */
if (raw_port_status & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
status |= xhci_port_speed(raw_port_status);
}
if (raw_port_status & PORT_PE)
status |= USB_PORT_STAT_ENABLE;
if (raw_port_status & PORT_OC)
status |= USB_PORT_STAT_OVERCURRENT;
if (raw_port_status & PORT_RESET)
status |= USB_PORT_STAT_RESET;
/* USB2 and USB3 specific bits, including Port Link State */
if (hcd->speed >= HCD_USB3)
xhci_get_usb3_port_status(port, &status, raw_port_status);
else
xhci_get_usb2_port_status(port, &status, raw_port_status,
flags);
if (bus_state->port_c_suspend & (1 << wIndex))
status |= USB_PORT_STAT_C_SUSPEND << 16;
return status;
}
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
unsigned long flags;
u32 temp, status;
int retval = 0;
int slot_id;
struct xhci_bus_state *bus_state;
u16 link_state = 0;
u16 wake_mask = 0;
u16 timeout = 0;
u16 test_mode = 0;
struct xhci_hub *rhub;
struct xhci_port **ports;
struct xhci_port *port;
int portnum1;
rhub = xhci_get_rhub(hcd);
ports = rhub->ports;
max_ports = rhub->num_ports;
bus_state = &rhub->bus_state;
portnum1 = wIndex & 0xff;
spin_lock_irqsave(&xhci->lock, flags);
switch (typeReq) {
case GetHubStatus:
/* No power source, over-current reported per port */
memset(buf, 0, 4);
break;
case GetHubDescriptor:
/* Check to make sure userspace is asking for the USB 3.0 hub
* descriptor for the USB 3.0 roothub. If not, we stall the
* endpoint, like external hubs do.
*/
if (hcd->speed >= HCD_USB3 &&
(wLength < USB_DT_SS_HUB_SIZE ||
wValue != (USB_DT_SS_HUB << 8))) {
xhci_dbg(xhci, "Wrong hub descriptor type for "
"USB 3.0 roothub.\n");
goto error;
}
xhci_hub_descriptor(hcd, xhci,
(struct usb_hub_descriptor *) buf);
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
if ((wValue & 0xff00) != (USB_DT_BOS << 8))
goto error;
if (hcd->speed < HCD_USB3)
goto error;
retval = xhci_create_usb3x_bos_desc(xhci, buf, wLength);
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
case GetPortStatus:
if (!portnum1 || portnum1 > max_ports)
goto error;
wIndex--;
port = ports[portnum1 - 1];
temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
break;
}
trace_xhci_get_port_status(wIndex, temp);
status = xhci_get_port_status(hcd, bus_state, wIndex, temp,
&flags);
if (status == 0xffffffff)
goto error;
xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
hcd->self.busnum, portnum1, temp, status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
/* if USB 3.1 extended port status return additional 4 bytes */
if (wValue == 0x02) {
u32 port_li;
if (hcd->speed < HCD_USB31 || wLength != 8) {
xhci_err(xhci, "get ext port status invalid parameter\n");
retval = -EINVAL;
break;
}
port_li = readl(port->addr + PORTLI);
status = xhci_get_ext_port_status(temp, port_li);
put_unaligned_le32(status, &buf[4]);
}
break;
case SetPortFeature:
if (wValue == USB_PORT_FEAT_LINK_STATE)
link_state = (wIndex & 0xff00) >> 3;
if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
wake_mask = wIndex & 0xff00;
if (wValue == USB_PORT_FEAT_TEST)
test_mode = (wIndex & 0xff00) >> 8;
/* The MSB of wIndex is the U1/U2 timeout */
timeout = (wIndex & 0xff00) >> 8;
wIndex &= 0xff;
if (!portnum1 || portnum1 > max_ports)
goto error;
port = ports[portnum1 - 1];
wIndex--;
temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
break;
}
temp = xhci_port_state_to_neutral(temp);
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = readl(port->addr);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port, XDEV_U0);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10);
spin_lock_irqsave(&xhci->lock, flags);
}
/* In spec software should not attempt to suspend
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
temp = readl(port->addr);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
hcd->self.busnum, portnum1);
goto error;
}
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
portnum1);
if (!slot_id) {
xhci_warn(xhci, "slot_id is zero\n");
goto error;
}
/* unlock to execute stop endpoint commands */
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
temp = readl(port->addr);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
temp = readl(port->addr);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d-%d\n",
hcd->self.busnum, portnum1);
temp = xhci_port_state_to_neutral(temp);
/*
* Clear all change bits, so that we get a new
* connection event.
*/
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
writel(temp | PORT_PE, port->addr);
temp = readl(port->addr);
break;
}
/* Put link in RxDetect (enable port) */
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
xhci_dbg(xhci, "Enable port %d-%d\n",
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
temp = readl(port->addr);
break;
}
/*
* For xHCI 1.1 according to section 4.19.1.2.4.1 a
* root hub port's transition to compliance mode upon
* detecting LFPS timeout may be controlled by an
* Compliance Transition Enabled (CTE) flag (not
* software visible). This flag is set by writing 0xA
* to PORTSC PLS field which will allow transition to
* compliance mode the next time LFPS timeout is
* encountered. A warm reset will clear it.
*
* The CTE flag is only supported if the HCCPARAMS2 CTC
* flag is set, otherwise, the compliance substate is
* automatically entered as on 1.0 and prior.
*/
if (link_state == USB_SS_PORT_LS_COMP_MOD) {
if (!HCC2_CTC(xhci->hcc_params2)) {
xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n");
break;
}
if ((temp & PORT_CONNECT)) {
xhci_warn(xhci, "Can't set compliance mode when port is connected\n");
goto error;
}
xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
temp = readl(port->addr);
break;
}
/* Port must be enabled */
if (!(temp & PORT_PE)) {
retval = -ENODEV;
break;
}
/* Can't set port link state above '3' (U3) */
if (link_state > USB_SS_PORT_LS_U3) {
xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
hcd->self.busnum, portnum1, link_state);
goto error;
}
/*
* set link to U0, steps depend on current link state.
* U3: set link to U0 and wait for u3exit completion.
* U1/U2: no PLC complete event, only set link to U0.
* Resume/Recovery: device initiated U0, only wait for
* completion
*/
if (link_state == USB_SS_PORT_LS_U0) {
u32 pls = temp & PORT_PLS_MASK;
bool wait_u0 = false;
/* already in U0 */
if (pls == XDEV_U0)
break;
if (pls == XDEV_U3 ||
pls == XDEV_RESUME ||
pls == XDEV_RECOVERY) {
wait_u0 = true;
reinit_completion(&port->u3exit_done);
}
if (pls <= XDEV_U3) /* U1, U2, U3 */
xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U0);
if (!wait_u0) {
if (pls > XDEV_U3)
goto error;
break;
}
spin_unlock_irqrestore(&xhci->lock, flags);
if (!wait_for_completion_timeout(&port->u3exit_done,
msecs_to_jiffies(500)))
xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
hcd->self.busnum, portnum1);
spin_lock_irqsave(&xhci->lock, flags);
temp = readl(port->addr);
break;
}
if (link_state == USB_SS_PORT_LS_U3) {
int retries = 16;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
portnum1);
if (slot_id) {
/* unlock to execute stop endpoint
* commands */
spin_unlock_irqrestore(&xhci->lock,
flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
while (retries--) {
usleep_range(4000, 8000);
temp = readl(port->addr);
if ((temp & PORT_PLS_MASK) == XDEV_U3)
break;
}
spin_lock_irqsave(&xhci->lock, flags);
temp = readl(port->addr);
bus_state->suspended_ports |= 1 << wIndex;
}
break;
case USB_PORT_FEAT_POWER:
/*
* Turn on ports, even if there isn't per-port switching.
* HC will report connect events even before this is set.
* However, hub_wq will ignore the roothub events until
* the roothub is registered.
*/
xhci_set_port_power(xhci, port, true, &flags);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
writel(temp, port->addr);
temp = readl(port->addr);
xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port, wake_mask);
temp = readl(port->addr);
xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
writel(temp, port->addr);
temp = readl(port->addr);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port->addr + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
temp |= PORT_U1_TIMEOUT(timeout);
writel(temp, port->addr + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port->addr + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
temp |= PORT_U2_TIMEOUT(timeout);
writel(temp, port->addr + PORTPMSC);
break;
case USB_PORT_FEAT_TEST:
/* 4.19.6 Port Test Modes (USB2 Test Mode) */
if (hcd->speed != HCD_USB2)
goto error;
if (test_mode > USB_TEST_FORCE_ENABLE ||
test_mode < USB_TEST_J)
goto error;
retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
&flags);
break;
default:
goto error;
}
/* unblock any posted writes */
temp = readl(port->addr);
break;
case ClearPortFeature:
if (!portnum1 || portnum1 > max_ports)
goto error;
port = ports[portnum1 - 1];
wIndex--;
temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
break;
}
/* FIXME: What new port features do we need to support? */
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = readl(port->addr);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
goto error;
if ((temp & PORT_PLS_MASK) == XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
set_bit(wIndex, &bus_state->resuming_ports);
usb_hcd_start_port_resume(&hcd->self, wIndex);
xhci_set_link_state(xhci, port, XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(USB_RESUME_TIMEOUT);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port, XDEV_U0);
clear_bit(wIndex, &bus_state->resuming_ports);
usb_hcd_end_port_resume(&hcd->self, wIndex);
}
bus_state->port_c_suspend |= 1 << wIndex;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
portnum1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
}
xhci_ring_device(xhci, slot_id);
break;
case USB_PORT_FEAT_C_SUSPEND:
bus_state->port_c_suspend &= ~(1 << wIndex);
fallthrough;
case USB_PORT_FEAT_C_RESET:
case USB_PORT_FEAT_C_BH_PORT_RESET:
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_OVER_CURRENT:
case USB_PORT_FEAT_C_ENABLE:
case USB_PORT_FEAT_C_PORT_LINK_STATE:
case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
xhci_clear_port_change_bit(xhci, wValue, wIndex,
port->addr, temp);
break;
case USB_PORT_FEAT_ENABLE:
xhci_disable_port(xhci, port);
break;
case USB_PORT_FEAT_POWER:
xhci_set_port_power(xhci, port, false, &flags);
break;
case USB_PORT_FEAT_TEST:
retval = xhci_exit_test_mode(xhci);
break;
default:
goto error;
}
break;
default:
error:
/* "stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
}
EXPORT_SYMBOL_GPL(xhci_hub_control);
/*
* Returns 0 if the status hasn't changed, or the number of bytes in buf.
* Ports are 0-indexed from the HCD point of view,
* and 1-indexed from the USB core pointer of view.
*
* Note that the status change bits will be cleared as soon as a port status
* change event is generated, so we use the saved status from that event.
*/
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
{
unsigned long flags;
u32 temp, status;
u32 mask;
int i, retval;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
struct xhci_bus_state *bus_state;
bool reset_change = false;
struct xhci_hub *rhub;
struct xhci_port **ports;
rhub = xhci_get_rhub(hcd);
ports = rhub->ports;
max_ports = rhub->num_ports;
bus_state = &rhub->bus_state;
/* Initial status is no changes */
retval = (max_ports + 8) / 8;
memset(buf, 0, retval);
/*
* Inform the usbcore about resume-in-progress by returning
* a non-zero value even if there are no status changes.
*/
spin_lock_irqsave(&xhci->lock, flags);
status = bus_state->resuming_ports;
/*
* SS devices are only visible to roothub after link training completes.
* Keep polling roothubs for a grace period after xHC start
*/
if (xhci->run_graceperiod) {
if (time_before(jiffies, xhci->run_graceperiod))
status = 1;
else
xhci->run_graceperiod = 0;
}
mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
temp = readl(ports[i]->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
break;
}
trace_xhci_hub_status_data(i, temp);
if ((temp & mask) != 0 ||
(bus_state->port_c_suspend & 1 << i) ||
(ports[i]->resume_timestamp && time_after_eq(
jiffies, ports[i]->resume_timestamp))) {
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
status = 1;
}
if ((temp & PORT_RC))
reset_change = true;
if (temp & PORT_OC)
status = 1;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping usb%d port polling\n",
__func__, hcd->self.busnum);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;
}
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, port_index;
struct xhci_bus_state *bus_state;
unsigned long flags;
struct xhci_hub *rhub;
struct xhci_port **ports;
u32 portsc_buf[USB_MAXCHILDREN];
bool wake_enabled;
rhub = xhci_get_rhub(hcd);
ports = rhub->ports;
max_ports = rhub->num_ports;
bus_state = &rhub->bus_state;
wake_enabled = hcd->self.root_hub->do_remote_wakeup;
spin_lock_irqsave(&xhci->lock, flags);
if (wake_enabled) {
if (bus_state->resuming_ports || /* USB2 */
bus_state->port_remote_wakeup) { /* USB3 */
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "usb%d bus suspend to fail because a port is resuming\n",
hcd->self.busnum);
return -EBUSY;
}
}
/*
* Prepare ports for suspend, but don't write anything before all ports
* are checked and we know bus suspend can proceed
*/
bus_state->bus_suspended = 0;
port_index = max_ports;
while (port_index--) {
u32 t1, t2;
int retries = 10;
retry:
t1 = readl(ports[port_index]->addr);
t2 = xhci_port_state_to_neutral(t1);
portsc_buf[port_index] = 0;
/*
* Give a USB3 port in link training time to finish, but don't
* prevent suspend as port might be stuck
*/
if ((hcd->speed >= HCD_USB3) && retries-- &&
(t1 & PORT_PLS_MASK) == XDEV_POLLING) {
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(XHCI_PORT_POLLING_LFPS_TIME);
spin_lock_irqsave(&xhci->lock, flags);
xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",
hcd->self.busnum, port_index + 1);
goto retry;
}
/* bail out if port detected a over-current condition */
if (t1 & PORT_OC) {
bus_state->bus_suspended = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
return -EBUSY;
}
/* suspend ports in U0, or bail out for new connect changes */
if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
if ((t1 & PORT_CSC) && wake_enabled) {
bus_state->bus_suspended = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
return -EBUSY;
}
xhci_dbg(xhci, "port %d-%d not suspended\n",
hcd->self.busnum, port_index + 1);
t2 &= ~PORT_PLS_MASK;
t2 |= PORT_LINK_STROBE | XDEV_U3;
set_bit(port_index, &bus_state->bus_suspended);
}
/* USB core sets remote wake mask for USB 3.0 hubs,
* including the USB 3.0 roothub, but only if CONFIG_PM
* is enabled, so also enable remote wake here.
*/
if (wake_enabled) {
if (t1 & PORT_CONNECT) {
t2 |= PORT_WKOC_E | PORT_WKDISC_E;
t2 &= ~PORT_WKCONN_E;
} else {
t2 |= PORT_WKOC_E | PORT_WKCONN_E;
t2 &= ~PORT_WKDISC_E;
}
if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
(hcd->speed < HCD_USB3)) {
if (usb_amd_pt_check_port(hcd->self.controller,
port_index))
t2 &= ~PORT_WAKE_BITS;
}
} else
t2 &= ~PORT_WAKE_BITS;
t1 = xhci_port_state_to_neutral(t1);
if (t1 != t2)
portsc_buf[port_index] = t2;
}
/* write port settings, stopping and suspending ports if needed */
port_index = max_ports;
while (port_index--) {
if (!portsc_buf[port_index])
continue;
if (test_bit(port_index, &bus_state->bus_suspended)) {
int slot_id;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
port_index + 1);
if (slot_id) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
}
writel(portsc_buf[port_index], ports[port_index]->addr);
}
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irqrestore(&xhci->lock, flags);
if (bus_state->bus_suspended)
usleep_range(5000, 10000);
return 0;
}
/*
* Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
* warm reset a USB3 device stuck in polling or compliance mode after resume.
* See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
*/
static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
{
u32 portsc;
portsc = readl(port->addr);
/* if any of these are set we are not stuck */
if (portsc & (PORT_CONNECT | PORT_CAS))
return false;
if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
return false;
/* clear wakeup/change bits, and do a warm port reset */
portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
portsc |= PORT_WR;
writel(portsc, port->addr);
/* flush write */
readl(port->addr);
return true;
}
int xhci_bus_resume(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_bus_state *bus_state;
unsigned long flags;
int max_ports, port_index;
int slot_id;
int sret;
u32 next_state;
u32 temp, portsc;
struct xhci_hub *rhub;
struct xhci_port **ports;
rhub = xhci_get_rhub(hcd);
ports = rhub->ports;
max_ports = rhub->num_ports;
bus_state = &rhub->bus_state;
if (time_before(jiffies, bus_state->next_statechange))
msleep(5);
spin_lock_irqsave(&xhci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd)) {
spin_unlock_irqrestore(&xhci->lock, flags);
return -ESHUTDOWN;
}
/* delay the irqs */
temp = readl(&xhci->op_regs->command);
temp &= ~CMD_EIE;
writel(temp, &xhci->op_regs->command);
/* bus specific resume for ports we suspended at bus_suspend */
if (hcd->speed >= HCD_USB3)
next_state = XDEV_U0;
else
next_state = XDEV_RESUME;
port_index = max_ports;
while (port_index--) {
portsc = readl(ports[port_index]->addr);
/* warm reset CAS limited ports stuck in polling/compliance */
if ((xhci->quirks & XHCI_MISSING_CAS) &&
(hcd->speed >= HCD_USB3) &&
xhci_port_missing_cas_quirk(ports[port_index])) {
xhci_dbg(xhci, "reset stuck port %d-%d\n",
hcd->self.busnum, port_index + 1);
clear_bit(port_index, &bus_state->bus_suspended);
continue;
}
/* resume if we suspended the link, and it is still suspended */
if (test_bit(port_index, &bus_state->bus_suspended))
switch (portsc & PORT_PLS_MASK) {
case XDEV_U3:
portsc = xhci_port_state_to_neutral(portsc);
portsc &= ~PORT_PLS_MASK;
portsc |= PORT_LINK_STROBE | next_state;
break;
case XDEV_RESUME:
/* resume already initiated */
break;
default:
/* not in a resumeable state, ignore it */
clear_bit(port_index,
&bus_state->bus_suspended);
break;
}
/* disable wake for all ports, write new link state if needed */
portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
writel(portsc, ports[port_index]->addr);
}
/* USB2 specific resume signaling delay and U0 link state transition */
if (hcd->speed < HCD_USB3) {
if (bus_state->bus_suspended) {
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(USB_RESUME_TIMEOUT);
spin_lock_irqsave(&xhci->lock, flags);
}
for_each_set_bit(port_index, &bus_state->bus_suspended,
BITS_PER_LONG) {
/* Clear PLC to poll it later for U0 transition */
xhci_test_and_clear_bit(xhci, ports[port_index],
PORT_PLC);
xhci_set_link_state(xhci, ports[port_index], XDEV_U0);
}
}
/* poll for U0 link state complete, both USB2 and USB3 */
for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) {
sret = xhci_handshake(ports[port_index]->addr, PORT_PLC,
PORT_PLC, 10 * 1000);
if (sret) {
xhci_warn(xhci, "port %d-%d resume PLC timeout\n",
hcd->self.busnum, port_index + 1);
continue;
}
xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
if (slot_id)
xhci_ring_device(xhci, slot_id);
}
(void) readl(&xhci->op_regs->command);
bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
/* re-enable irqs */
temp = readl(&xhci->op_regs->command);
temp |= CMD_EIE;
writel(temp, &xhci->op_regs->command);
temp = readl(&xhci->op_regs->command);
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
}
unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd)
{
struct xhci_hub *rhub = xhci_get_rhub(hcd);
/* USB3 port wakeups are reported via usb_wakeup_notification() */
return rhub->bus_state.resuming_ports; /* USB2 ports only */
}
#endif /* CONFIG_PM */