96 lines
2.5 KiB
YAML
96 lines
2.5 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Calxeda AHCI SATA Controller
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The Calxeda SATA controller mostly conforms to the AHCI interface
|
||
|
|
with some special extensions to add functionality, to map GPIOs for
|
||
|
|
activity LEDs and for mapping the ComboPHYs.
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Andre Przywara <andre.przywara@arm.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: calxeda,hb-ahci
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
dma-coherent: true
|
||
|
|
|
||
|
|
calxeda,pre-clocks:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Indicates the number of additional clock cycles to transmit before
|
||
|
|
sending an SGPIO pattern.
|
||
|
|
|
||
|
|
calxeda,post-clocks:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Indicates the number of additional clock cycles to transmit after
|
||
|
|
sending an SGPIO pattern.
|
||
|
|
|
||
|
|
calxeda,led-order:
|
||
|
|
description: Maps port numbers to offsets within the SGPIO bitstream.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8
|
||
|
|
|
||
|
|
calxeda,port-phys:
|
||
|
|
description: |
|
||
|
|
phandle-combophy and lane assignment, which maps each SATA port to a
|
||
|
|
combophy and a lane within that combophy
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8
|
||
|
|
items:
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
calxeda,tx-atten:
|
||
|
|
description: |
|
||
|
|
Contains TX attenuation override codes, one per port.
|
||
|
|
The upper 24 bits of each entry are always 0 and thus ignored.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8
|
||
|
|
|
||
|
|
calxeda,sgpio-gpio:
|
||
|
|
maxItems: 3
|
||
|
|
description: |
|
||
|
|
phandle-gpio bank, bit offset, and default on or off, which indicates
|
||
|
|
that the driver supports SGPIO indicator lights using the indicated
|
||
|
|
GPIOs.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
sata@ffe08000 {
|
||
|
|
compatible = "calxeda,hb-ahci";
|
||
|
|
reg = <0xffe08000 0x1000>;
|
||
|
|
interrupts = <115>;
|
||
|
|
dma-coherent;
|
||
|
|
calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
|
||
|
|
<&combophy0 2>, <&combophy0 3>;
|
||
|
|
calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
|
||
|
|
calxeda,led-order = <4 0 1 2 3>;
|
||
|
|
calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
|
||
|
|
calxeda,pre-clocks = <10>;
|
||
|
|
calxeda,post-clocks = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|