140 lines
3.3 KiB
YAML
140 lines
3.3 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Analog Devices AD5758 DAC
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Michael Hennerich <Michael.Hennerich@analog.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: adi,ad5758
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
spi-cpha: true
|
||
|
|
|
||
|
|
adi,dc-dc-mode:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum: [1, 2, 3]
|
||
|
|
description: |
|
||
|
|
Mode of operation of the dc-to-dc converter
|
||
|
|
Dynamic Power Control (DPC)
|
||
|
|
In this mode, the AD5758 circuitry senses the output voltage and
|
||
|
|
dynamically regulates the supply voltage, VDPC+, to meet compliance
|
||
|
|
requirements plus an optimized headroom voltage for the output buffer.
|
||
|
|
|
||
|
|
Programmable Power Control (PPC)
|
||
|
|
In this mode, the VDPC+ voltage is user-programmable to a fixed level
|
||
|
|
that needs to accommodate the maximum output load required.
|
||
|
|
|
||
|
|
The output of the DAC core is either converted to a current or
|
||
|
|
voltage output at the VIOUT pin. Only one mode can be enabled at
|
||
|
|
any one time.
|
||
|
|
|
||
|
|
The following values are currently supported:
|
||
|
|
* 1: DPC current mode
|
||
|
|
* 2: DPC voltage mode
|
||
|
|
* 3: PPC current mode
|
||
|
|
|
||
|
|
Depending on the selected output mode (voltage or current) one of the
|
||
|
|
two properties must be present:
|
||
|
|
|
||
|
|
adi,range-microvolt:
|
||
|
|
description: |
|
||
|
|
Voltage output range specified as <minimum, maximum>
|
||
|
|
oneOf:
|
||
|
|
- items:
|
||
|
|
- const: 0
|
||
|
|
- enum: [5000000, 10000000]
|
||
|
|
- items:
|
||
|
|
- const: -5000000
|
||
|
|
- const: 5000000
|
||
|
|
- items:
|
||
|
|
- const: -10000000
|
||
|
|
- const: 10000000
|
||
|
|
|
||
|
|
adi,range-microamp:
|
||
|
|
description: |
|
||
|
|
Current output range specified as <minimum, maximum>
|
||
|
|
oneOf:
|
||
|
|
- items:
|
||
|
|
- const: 0
|
||
|
|
- enum: [20000, 24000]
|
||
|
|
- items:
|
||
|
|
- const: 4
|
||
|
|
- const: 24000
|
||
|
|
- items:
|
||
|
|
- const: -20000
|
||
|
|
- const: 20000
|
||
|
|
- items:
|
||
|
|
- const: -24000
|
||
|
|
- const: 24000
|
||
|
|
- items:
|
||
|
|
- const: -1000
|
||
|
|
- const: 22000
|
||
|
|
|
||
|
|
reset-gpios: true
|
||
|
|
|
||
|
|
adi,dc-dc-ilim-microamp:
|
||
|
|
enum: [150000, 200000, 250000, 300000, 350000, 400000]
|
||
|
|
description: |
|
||
|
|
The dc-to-dc converter current limit.
|
||
|
|
|
||
|
|
adi,slew-time-us:
|
||
|
|
description: |
|
||
|
|
The time it takes for the output to reach the full scale [uS]
|
||
|
|
minimum: 133
|
||
|
|
maximum: 1023984375
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- spi-cpha
|
||
|
|
- adi,dc-dc-mode
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
adi,dc-dc-mode:
|
||
|
|
enum: [1, 3]
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
adi,range-microvolt: false
|
||
|
|
required:
|
||
|
|
- adi,range-microamp
|
||
|
|
else:
|
||
|
|
properties:
|
||
|
|
adi,range-microamp: false
|
||
|
|
required:
|
||
|
|
- adi,range-microvolt
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
spi {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
dac@0 {
|
||
|
|
compatible = "adi,ad5758";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
spi-cpha;
|
||
|
|
|
||
|
|
reset-gpios = <&gpio 22 0>;
|
||
|
|
|
||
|
|
adi,dc-dc-mode = <2>;
|
||
|
|
adi,range-microvolt = <0 10000000>;
|
||
|
|
adi,dc-dc-ilim-microamp = <200000>;
|
||
|
|
adi,slew-time-us = <125000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
...
|