209 lines
7.3 KiB
YAML
209 lines
7.3 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: ARM MHUv2 Mailbox Controller
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Tushar Khandelwal <tushar.khandelwal@arm.com>
|
||
|
|
- Viresh Kumar <viresh.kumar@linaro.org>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has
|
||
|
|
between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional
|
||
|
|
communication with remote processor(s), where the number of channel windows
|
||
|
|
are implementation dependent.
|
||
|
|
|
||
|
|
Given the unidirectional nature of the controller, an MHUv2 mailbox may only
|
||
|
|
be written to or read from. If a pair of MHU controllers is implemented
|
||
|
|
between two processing elements to provide bidirectional communication, these
|
||
|
|
must be specified as two separate mailboxes.
|
||
|
|
|
||
|
|
If the interrupts property is present in device tree node, then its treated as
|
||
|
|
a "receiver" mailbox, otherwise a "sender".
|
||
|
|
|
||
|
|
An MHU controller must be specified along with the supported transport
|
||
|
|
protocols. The transport protocols determine the method of data transmission
|
||
|
|
as well as the number of provided mailbox channels.
|
||
|
|
|
||
|
|
Following are the possible transport protocols.
|
||
|
|
|
||
|
|
- Data-transfer: Each transfer is made of one or more words, using one or more
|
||
|
|
channel windows.
|
||
|
|
|
||
|
|
- Doorbell: Each transfer is made up of single bit flag, using any one of the
|
||
|
|
bits in a channel window. A channel window can support up to 32 doorbells
|
||
|
|
and the entire window shall be used in doorbell protocol. Optionally, data
|
||
|
|
may be transmitted through a shared memory region, wherein the MHU is used
|
||
|
|
strictly as an interrupt generation mechanism but that is out of the scope
|
||
|
|
of these bindings.
|
||
|
|
|
||
|
|
# We need a select here so we don't match all nodes with 'arm,primecell'
|
||
|
|
select:
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
contains:
|
||
|
|
enum:
|
||
|
|
- arm,mhuv2-tx
|
||
|
|
- arm,mhuv2-rx
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
oneOf:
|
||
|
|
- description: Sender mode
|
||
|
|
items:
|
||
|
|
- const: arm,mhuv2-tx
|
||
|
|
- const: arm,primecell
|
||
|
|
|
||
|
|
- description: Receiver-mode
|
||
|
|
items:
|
||
|
|
- const: arm,mhuv2-rx
|
||
|
|
- const: arm,primecell
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
description: |
|
||
|
|
The MHUv2 controller always implements an interrupt in the "receiver"
|
||
|
|
mode, while the interrupt in the "sender" mode was not available in the
|
||
|
|
version MHUv2.0, but the later versions do have it.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
arm,mhuv2-protocols:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
||
|
|
description: |
|
||
|
|
The MHUv2 controller may contain up to 124 channel windows (each 32-bit
|
||
|
|
wide). The hardware and the DT bindings allows any combination of those to
|
||
|
|
be used for various transport protocols.
|
||
|
|
|
||
|
|
This property allows a platform to describe how these channel windows are
|
||
|
|
used in various transport protocols. The entries in this property shall be
|
||
|
|
present as an array of tuples, where each tuple describes details about
|
||
|
|
one of the transport protocol being implemented over some channel
|
||
|
|
window(s).
|
||
|
|
|
||
|
|
The first field of a tuple signifies the transfer protocol, 0 is reserved
|
||
|
|
for doorbell protocol, and 1 is reserved for data-transfer protocol.
|
||
|
|
Using any other value in the first field of a tuple makes it invalid.
|
||
|
|
|
||
|
|
The second field of a tuple signifies the number of channel windows where
|
||
|
|
the protocol would be used and should be set to a non zero value. For
|
||
|
|
doorbell protocol this field signifies the number of 32-bit channel
|
||
|
|
windows that implement the doorbell protocol. For data-transfer protocol,
|
||
|
|
this field signifies the number of 32-bit channel windows that implement
|
||
|
|
the data-transfer protocol.
|
||
|
|
|
||
|
|
The total number of channel windows specified here shouldn't be more than
|
||
|
|
the ones implemented by the platform, though one can specify lesser number
|
||
|
|
of windows here than what the platform implements.
|
||
|
|
|
||
|
|
mhu: mailbox@2b1f0000 {
|
||
|
|
...
|
||
|
|
|
||
|
|
arm,mhuv2-protocols = <0 2>, <1 1>, <1 5>, <1 7>;
|
||
|
|
}
|
||
|
|
|
||
|
|
The above example defines the protocols of an ARM MHUv2 mailbox
|
||
|
|
controller, where a total of 15 channel windows are used. The first two
|
||
|
|
windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and
|
||
|
|
7 windows (separately) used in data-transfer protocol.
|
||
|
|
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 124
|
||
|
|
items:
|
||
|
|
items:
|
||
|
|
- enum: [ 0, 1 ]
|
||
|
|
- minimum: 0
|
||
|
|
maximum: 124
|
||
|
|
|
||
|
|
|
||
|
|
'#mbox-cells':
|
||
|
|
description: |
|
||
|
|
It is always set to 2. The first argument in the consumers 'mboxes'
|
||
|
|
property represents the channel window group, which may be used in
|
||
|
|
doorbell, or data-transfer protocol, and the second argument (only
|
||
|
|
relevant in doorbell protocol, should be 0 otherwise) represents the
|
||
|
|
doorbell number within the 32 bit wide channel window.
|
||
|
|
|
||
|
|
From the example given above for arm,mhuv2-protocols, here is how a client
|
||
|
|
node can reference them.
|
||
|
|
|
||
|
|
mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5.
|
||
|
|
mboxes = <&mhu 1 7>; // Channel Window Group 1, doorbell 7.
|
||
|
|
mboxes = <&mhu 2 0>; // Channel Window Group 2, data transfer protocol with 1 window.
|
||
|
|
mboxes = <&mhu 3 0>; // Channel Window Group 3, data transfer protocol with 5 windows.
|
||
|
|
mboxes = <&mhu 4 0>; // Channel Window Group 4, data transfer protocol with 7 windows.
|
||
|
|
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
if:
|
||
|
|
# Interrupt is compulsory for receiver
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
contains:
|
||
|
|
const: arm,mhuv2-rx
|
||
|
|
then:
|
||
|
|
required:
|
||
|
|
- interrupts
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- '#mbox-cells'
|
||
|
|
- arm,mhuv2-protocols
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
# Multiple transport protocols implemented by the mailbox controllers
|
||
|
|
- |
|
||
|
|
soc {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
|
||
|
|
mhu_tx: mailbox@2b1f0000 {
|
||
|
|
#mbox-cells = <2>;
|
||
|
|
compatible = "arm,mhuv2-tx", "arm,primecell";
|
||
|
|
reg = <0 0x2b1f0000 0 0x1000>;
|
||
|
|
clocks = <&clock 0>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
interrupts = <0 45 4>;
|
||
|
|
arm,mhuv2-protocols = <1 5>, <1 2>, <1 5>, <1 7>, <0 2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mhu_rx: mailbox@2b1f1000 {
|
||
|
|
#mbox-cells = <2>;
|
||
|
|
compatible = "arm,mhuv2-rx", "arm,primecell";
|
||
|
|
reg = <0 0x2b1f1000 0 0x1000>;
|
||
|
|
clocks = <&clock 0>;
|
||
|
|
clock-names = "apb_pclk";
|
||
|
|
interrupts = <0 46 4>;
|
||
|
|
arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mhu_client: dsp@596e8000 {
|
||
|
|
compatible = "fsl,imx8qxp-dsp";
|
||
|
|
reg = <0 0x596e8000 0 0x88000>;
|
||
|
|
clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>;
|
||
|
|
clock-names = "ipg", "ocram", "core";
|
||
|
|
power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>;
|
||
|
|
mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
|
||
|
|
mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx
|
||
|
|
<&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx
|
||
|
|
<&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx
|
||
|
|
<&mhu_rx 0 0>; //data-transfer protocol with 1 window, mhu-rx
|
||
|
|
memory-region = <&dsp_reserved>;
|
||
|
|
};
|
||
|
|
};
|