100 lines
2.3 KiB
YAML
100 lines
2.3 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
- Mark Greer <mgreer@animalcreek.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: ti,trf7970a
|
||
|
|
|
||
|
|
autosuspend-delay:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Specify autosuspend delay in milliseconds.
|
||
|
|
|
||
|
|
clock-frequency:
|
||
|
|
description: |
|
||
|
|
Set to specify that the input frequency to the trf7970a is 13560000Hz or
|
||
|
|
27120000Hz
|
||
|
|
|
||
|
|
en2-rf-quirk:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
Specify that the trf7970a being used has the "EN2 RF" erratum
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
irq-status-read-quirk:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
Specify that the trf7970a being used has the "IRQ Status Read" erratum
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,enable-gpios:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
description: |
|
||
|
|
One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
|
||
|
|
is optional.
|
||
|
|
|
||
|
|
vdd-io-supply:
|
||
|
|
description: |
|
||
|
|
Regulator specifying voltage for VDD-IO
|
||
|
|
|
||
|
|
vin-supply:
|
||
|
|
description: |
|
||
|
|
Regulator for supply voltage to VIN pin
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- interrupts
|
||
|
|
- reg
|
||
|
|
- spi-max-frequency
|
||
|
|
- ti,enable-gpios
|
||
|
|
- vin-supply
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
nfc@0 {
|
||
|
|
compatible = "ti,trf7970a";
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&trf7970a_default>;
|
||
|
|
spi-max-frequency = <2000000>;
|
||
|
|
interrupt-parent = <&gpio2>;
|
||
|
|
interrupts = <14 0>;
|
||
|
|
|
||
|
|
ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
|
||
|
|
<&gpio2 5 GPIO_ACTIVE_HIGH>;
|
||
|
|
vin-supply = <&ldo3_reg>;
|
||
|
|
vdd-io-supply = <&ldo2_reg>;
|
||
|
|
autosuspend-delay = <30000>;
|
||
|
|
irq-status-read-quirk;
|
||
|
|
en2-rf-quirk;
|
||
|
|
clock-frequency = <27120000>;
|
||
|
|
};
|
||
|
|
};
|