219 lines
5.5 KiB
YAML
219 lines
5.5 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
%YAML 1.2
|
||
|
---
|
||
|
$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
|
||
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||
|
|
||
|
title: Cadence Torrent SD0801 PHY
|
||
|
|
||
|
description:
|
||
|
This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
|
||
|
hardware included with the Cadence MHDP DisplayPort controller. Torrent
|
||
|
PHY also supports multilink multiprotocol combinations including protocols
|
||
|
such as PCIe, USB, SGMII, QSGMII etc.
|
||
|
|
||
|
maintainers:
|
||
|
- Swapnil Jakhade <sjakhade@cadence.com>
|
||
|
- Yuti Amonkar <yamonkar@cadence.com>
|
||
|
|
||
|
properties:
|
||
|
compatible:
|
||
|
enum:
|
||
|
- cdns,torrent-phy
|
||
|
- ti,j721e-serdes-10g
|
||
|
|
||
|
'#address-cells':
|
||
|
const: 1
|
||
|
|
||
|
'#size-cells':
|
||
|
const: 0
|
||
|
|
||
|
'#clock-cells':
|
||
|
const: 1
|
||
|
|
||
|
clocks:
|
||
|
minItems: 1
|
||
|
maxItems: 2
|
||
|
description:
|
||
|
PHY reference clock for 1 item. Must contain an entry in clock-names.
|
||
|
Optional Parent to enable output reference clock.
|
||
|
|
||
|
clock-names:
|
||
|
minItems: 1
|
||
|
items:
|
||
|
- const: refclk
|
||
|
- const: phy_en_refclk
|
||
|
|
||
|
assigned-clocks:
|
||
|
maxItems: 3
|
||
|
|
||
|
assigned-clock-parents:
|
||
|
maxItems: 3
|
||
|
|
||
|
reg:
|
||
|
minItems: 1
|
||
|
items:
|
||
|
- description: Offset of the Torrent PHY configuration registers.
|
||
|
- description: Offset of the DPTX PHY configuration registers.
|
||
|
|
||
|
reg-names:
|
||
|
minItems: 1
|
||
|
items:
|
||
|
- const: torrent_phy
|
||
|
- const: dptx_phy
|
||
|
|
||
|
resets:
|
||
|
minItems: 1
|
||
|
items:
|
||
|
- description: Torrent PHY reset.
|
||
|
- description: Torrent APB reset. This is optional.
|
||
|
|
||
|
reset-names:
|
||
|
minItems: 1
|
||
|
items:
|
||
|
- const: torrent_reset
|
||
|
- const: torrent_apb
|
||
|
|
||
|
patternProperties:
|
||
|
'^phy@[0-3]$':
|
||
|
type: object
|
||
|
description:
|
||
|
Each group of PHY lanes with a single master lane should be represented as a sub-node.
|
||
|
properties:
|
||
|
reg:
|
||
|
description:
|
||
|
The master lane number. This is the lowest numbered lane in the lane group.
|
||
|
minimum: 0
|
||
|
maximum: 3
|
||
|
|
||
|
resets:
|
||
|
minItems: 1
|
||
|
maxItems: 4
|
||
|
description:
|
||
|
Contains list of resets, one per lane, to get all the link lanes out of reset.
|
||
|
|
||
|
"#phy-cells":
|
||
|
const: 0
|
||
|
|
||
|
cdns,phy-type:
|
||
|
description:
|
||
|
Specifies the type of PHY for which the group of PHY lanes is used.
|
||
|
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
minimum: 1
|
||
|
maximum: 9
|
||
|
|
||
|
cdns,num-lanes:
|
||
|
description:
|
||
|
Number of lanes.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
enum: [1, 2, 3, 4]
|
||
|
default: 4
|
||
|
|
||
|
cdns,ssc-mode:
|
||
|
description:
|
||
|
Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
|
||
|
EXTERNAL_SSC or INTERNAL_SSC.
|
||
|
Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
enum: [0, 1, 2]
|
||
|
default: 0
|
||
|
|
||
|
cdns,max-bit-rate:
|
||
|
description:
|
||
|
Maximum DisplayPort link bit rate to use, in Mbps
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
|
||
|
default: 8100
|
||
|
|
||
|
required:
|
||
|
- reg
|
||
|
- resets
|
||
|
- "#phy-cells"
|
||
|
- cdns,phy-type
|
||
|
- cdns,num-lanes
|
||
|
|
||
|
additionalProperties: false
|
||
|
|
||
|
required:
|
||
|
- compatible
|
||
|
- "#address-cells"
|
||
|
- "#size-cells"
|
||
|
- clocks
|
||
|
- clock-names
|
||
|
- reg
|
||
|
- reg-names
|
||
|
- resets
|
||
|
- reset-names
|
||
|
|
||
|
additionalProperties: false
|
||
|
|
||
|
examples:
|
||
|
- |
|
||
|
#include <dt-bindings/phy/phy.h>
|
||
|
|
||
|
bus {
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
torrent-phy@f0fb500000 {
|
||
|
compatible = "cdns,torrent-phy";
|
||
|
reg = <0xf0 0xfb500000 0x0 0x00100000>,
|
||
|
<0xf0 0xfb030a00 0x0 0x00000040>;
|
||
|
reg-names = "torrent_phy", "dptx_phy";
|
||
|
resets = <&phyrst 0>;
|
||
|
reset-names = "torrent_reset";
|
||
|
clocks = <&ref_clk>;
|
||
|
clock-names = "refclk";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
phy@0 {
|
||
|
reg = <0>;
|
||
|
resets = <&phyrst 1>, <&phyrst 2>,
|
||
|
<&phyrst 3>, <&phyrst 4>;
|
||
|
#phy-cells = <0>;
|
||
|
cdns,phy-type = <PHY_TYPE_DP>;
|
||
|
cdns,num-lanes = <4>;
|
||
|
cdns,max-bit-rate = <8100>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
- |
|
||
|
#include <dt-bindings/phy/phy.h>
|
||
|
#include <dt-bindings/phy/phy-cadence.h>
|
||
|
|
||
|
bus {
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
torrent-phy@f0fb500000 {
|
||
|
compatible = "cdns,torrent-phy";
|
||
|
reg = <0xf0 0xfb500000 0x0 0x00100000>;
|
||
|
reg-names = "torrent_phy";
|
||
|
resets = <&phyrst 0>, <&phyrst 1>;
|
||
|
reset-names = "torrent_reset", "torrent_apb";
|
||
|
clocks = <&ref_clk>;
|
||
|
clock-names = "refclk";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
phy@0 {
|
||
|
reg = <0>;
|
||
|
resets = <&phyrst 2>, <&phyrst 3>;
|
||
|
#phy-cells = <0>;
|
||
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
||
|
cdns,num-lanes = <2>;
|
||
|
cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
|
||
|
};
|
||
|
|
||
|
phy@2 {
|
||
|
reg = <2>;
|
||
|
resets = <&phyrst 4>;
|
||
|
#phy-cells = <0>;
|
||
|
cdns,phy-type = <PHY_TYPE_SGMII>;
|
||
|
cdns,num-lanes = <1>;
|
||
|
cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
...
|