377 lines
12 KiB
YAML
377 lines
12 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Mediatek MT7622 Pin Controller
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Sean Wang <sean.wang@kernel.org>
|
||
|
|
|
||
|
|
description: |+
|
||
|
|
The MediaTek's MT7622 Pin controller is used to control SoC pins.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- mediatek,mt7622-pinctrl
|
||
|
|
- mediatek,mt7629-pinctrl
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reg-names:
|
||
|
|
items:
|
||
|
|
- const: eint
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
"#gpio-cells":
|
||
|
|
const: 2
|
||
|
|
description: |
|
||
|
|
Number of cells in GPIO specifier. Since the generic GPIO
|
||
|
|
binding is used, the amount of cells must be specified as 2. See the below
|
||
|
|
mentioned gpio binding representation for description of particular cells.
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
"#interrupt-cells":
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: "pinctrl.yaml#"
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- gpio-controller
|
||
|
|
- "#gpio-cells"
|
||
|
|
|
||
|
|
if:
|
||
|
|
required:
|
||
|
|
- interrupt-controller
|
||
|
|
then:
|
||
|
|
required:
|
||
|
|
- reg-names
|
||
|
|
- interrupts
|
||
|
|
- "#interrupt-cells"
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
'-pins(-[a-z]+)?$':
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
patternProperties:
|
||
|
|
'^mux(-|$)':
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
description: |
|
||
|
|
pinmux configuration nodes.
|
||
|
|
$ref: "/schemas/pinctrl/pinmux-node.yaml"
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
description: |
|
||
|
|
A string containing the name of the function to mux to the group.
|
||
|
|
enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
|
||
|
|
spi, tdm, uart, watchdog, wifi]
|
||
|
|
|
||
|
|
groups:
|
||
|
|
description: |
|
||
|
|
An array of strings. Each string contains the name of a group.
|
||
|
|
|
||
|
|
drive-strength:
|
||
|
|
enum: [4, 8, 12, 16]
|
||
|
|
|
||
|
|
required:
|
||
|
|
- groups
|
||
|
|
- function
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: emmc
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [emmc, emmc_rst]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: eth
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
|
||
|
|
rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: i2c
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
|
||
|
|
i2c2_1, i2c2_2]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: i2s
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
|
||
|
|
i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
|
||
|
|
i2s1_out_data, i2s2_out_data, i2s3_out_data,
|
||
|
|
i2s4_out_data]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: ir
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: led
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
|
||
|
|
ephy4_led, wled, wf2g_led, wf5g_led]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: flash
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [par_nand, snfi, spi_nor]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: pcie
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
|
||
|
|
pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
|
||
|
|
pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
|
||
|
|
pcie_wake, pcie_clkreq]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: pmic
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [pmic_bus]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: pwm
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
|
||
|
|
pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
|
||
|
|
pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
|
||
|
|
pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
|
||
|
|
pwm_ch7_0, pwm_0, pwm_1]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: sd
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [sd_0, sd_1]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: spi
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
|
||
|
|
spic2_0, spi_0, spi_1, spi_wp, spi_hold]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: tdm
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
|
||
|
|
tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
|
||
|
|
tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: uart
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
|
||
|
|
uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
|
||
|
|
uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
|
||
|
|
uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
|
||
|
|
uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
|
||
|
|
uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
|
||
|
|
uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
|
||
|
|
uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
|
||
|
|
uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
|
||
|
|
uart2_1_txd_rxd, uart2_1_cts_rts]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: watchdog
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [watchdog]
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
function:
|
||
|
|
const: wifi
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
enum: [wf0_2g, wf0_5g]
|
||
|
|
|
||
|
|
'^conf(-|$)':
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
description: |
|
||
|
|
pinconf configuration nodes.
|
||
|
|
$ref: "/schemas/pinctrl/pincfg-node.yaml"
|
||
|
|
|
||
|
|
properties:
|
||
|
|
groups:
|
||
|
|
description: |
|
||
|
|
An array of strings. Each string contains the name of a group.
|
||
|
|
Valid values are the same as the pinmux node.
|
||
|
|
|
||
|
|
pins:
|
||
|
|
description: |
|
||
|
|
An array of strings. Each string contains the name of a pin.
|
||
|
|
enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
|
||
|
|
RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
|
||
|
|
I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
|
||
|
|
I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
|
||
|
|
G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
|
||
|
|
G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
|
||
|
|
NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
|
||
|
|
MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
|
||
|
|
MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
|
||
|
|
MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
|
||
|
|
MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
|
||
|
|
PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
|
||
|
|
GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
|
||
|
|
PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
|
||
|
|
AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
|
||
|
|
PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
|
||
|
|
WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
|
||
|
|
WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
|
||
|
|
EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
|
||
|
|
EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
|
||
|
|
WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
|
||
|
|
UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
|
||
|
|
UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
|
||
|
|
PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
|
||
|
|
GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
|
||
|
|
TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
|
||
|
|
WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
|
||
|
|
|
||
|
|
bias-disable: true
|
||
|
|
|
||
|
|
bias-pull-up: true
|
||
|
|
|
||
|
|
bias-pull-down: true
|
||
|
|
|
||
|
|
input-enable: true
|
||
|
|
|
||
|
|
input-disable: true
|
||
|
|
|
||
|
|
output-enable: true
|
||
|
|
|
||
|
|
output-low: true
|
||
|
|
|
||
|
|
output-high: true
|
||
|
|
|
||
|
|
input-schmitt-enable: true
|
||
|
|
|
||
|
|
input-schmitt-disable: true
|
||
|
|
|
||
|
|
drive-strength:
|
||
|
|
enum: [4, 8, 12, 16]
|
||
|
|
|
||
|
|
slew-rate:
|
||
|
|
enum: [0, 1]
|
||
|
|
|
||
|
|
mediatek,tdsel:
|
||
|
|
description: |
|
||
|
|
An integer describing the steps for output level shifter duty
|
||
|
|
cycle when asserted (high pulse width adjustment). Valid arguments
|
||
|
|
are from 0 to 15.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
mediatek,rdsel:
|
||
|
|
description: |
|
||
|
|
An integer describing the steps for input level shifter duty cycle
|
||
|
|
when asserted (high pulse width adjustment). Valid arguments are
|
||
|
|
from 0 to 63.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
required:
|
||
|
|
- pins
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
|
||
|
|
soc {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
|
||
|
|
pio: pinctrl@10211000 {
|
||
|
|
compatible = "mediatek,mt7622-pinctrl";
|
||
|
|
reg = <0 0x10211000 0 0x1000>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
|
||
|
|
pinctrl_eth_default: eth-pins {
|
||
|
|
mux-mdio {
|
||
|
|
groups = "mdc_mdio";
|
||
|
|
function = "eth";
|
||
|
|
drive-strength = <12>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mux-gmac2 {
|
||
|
|
groups = "rgmii_via_gmac2";
|
||
|
|
function = "eth";
|
||
|
|
drive-strength = <12>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mux-esw {
|
||
|
|
groups = "esw";
|
||
|
|
function = "eth";
|
||
|
|
drive-strength = <8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
conf-mdio {
|
||
|
|
pins = "MDC";
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|