142 lines
3.9 KiB
YAML
142 lines
3.9 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Richtek RT5190A PMIC Regulator
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- ChiYuan Huang <cy_huang@richtek.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
|
||
|
|
synchronous buck converters, 1 LDO, I2C control interface and peripherial
|
||
|
|
logical control.
|
||
|
|
|
||
|
|
It also supports mute AC OFF depop sound and quick setting storage while
|
||
|
|
input power is removed.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- richtek,rt5190a
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
vin2-supply:
|
||
|
|
description: phandle to buck2 input voltage.
|
||
|
|
|
||
|
|
vin3-supply:
|
||
|
|
description: phandle to buck3 input voltage.
|
||
|
|
|
||
|
|
vin4-supply:
|
||
|
|
description: phandle to buck4 input voltage.
|
||
|
|
|
||
|
|
vinldo-supply:
|
||
|
|
description: phandle to ldo input voltage
|
||
|
|
|
||
|
|
richtek,mute-enable:
|
||
|
|
description: |
|
||
|
|
The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
|
||
|
|
signal. When enabled, The normal behavior is to bypass the 'mutein' signal
|
||
|
|
'muteout'. But if the power source removal is detected from 'vdet',
|
||
|
|
whatever the 'mutein' signal is, it will pull down the 'muteout' to force
|
||
|
|
speakers mute. this function is commonly used to prevent the speaker pop
|
||
|
|
noise during AC power turned off in the modern TV system design.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
regulators:
|
||
|
|
type: object
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
"^buck[1-4]$|^ldo$":
|
||
|
|
type: object
|
||
|
|
$ref: regulator.yaml#
|
||
|
|
description: |
|
||
|
|
regulator description for buck1 to buck4, and ldo.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
regulator-allowed-modes:
|
||
|
|
description: |
|
||
|
|
buck operating mode, only buck1/4 support mode operating.
|
||
|
|
0: auto mode
|
||
|
|
1: force pwm mode
|
||
|
|
items:
|
||
|
|
enum: [0, 1]
|
||
|
|
|
||
|
|
richtek,latchup-enable:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
If specified, undervolt protection mode changes from the default
|
||
|
|
hiccup to latchup.
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- regulators
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
|
||
|
|
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
pmic@64 {
|
||
|
|
compatible = "richtek,rt5190a";
|
||
|
|
reg = <0x64>;
|
||
|
|
interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
vin2-supply = <&rt5190_buck1>;
|
||
|
|
vin3-supply = <&rt5190_buck1>;
|
||
|
|
vin4-supply = <&rt5190_buck1>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
rt5190_buck1: buck1 {
|
||
|
|
regulator-name = "rt5190a-buck1";
|
||
|
|
regulator-min-microvolt = <5090000>;
|
||
|
|
regulator-max-microvolt = <5090000>;
|
||
|
|
regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
buck2 {
|
||
|
|
regulator-name = "rt5190a-buck2";
|
||
|
|
regulator-min-microvolt = <600000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
buck3 {
|
||
|
|
regulator-name = "rt5190a-buck3";
|
||
|
|
regulator-min-microvolt = <600000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
buck4 {
|
||
|
|
regulator-name = "rt5190a-buck4";
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <850000>;
|
||
|
|
regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
ldo {
|
||
|
|
regulator-name = "rt5190a-ldo";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|