160 lines
3.8 KiB
YAML
160 lines
3.8 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Richtek RTMV20 laser diode regulator
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- ChiYuan Huang <cy_huang@richtek.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Richtek RTMV20 is a load switch current regulator that can supply up to 6A.
|
||
|
|
It is used to drive laser diode. There're two signals for chip controls
|
||
|
|
(Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication.
|
||
|
|
There're still four pins for camera control, two inputs (strobe and vsync),
|
||
|
|
the others for outputs (fsin1 and fsin2). Strobe input to start the current
|
||
|
|
supply, vsync input from IR camera, and fsin1/fsin2 output for the optional.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: richtek,rtmv20
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
wakeup-source: true
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
enable-gpios:
|
||
|
|
description: A connection of the 'enable' gpio line.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
richtek,ld-pulse-delay-us:
|
||
|
|
description: |
|
||
|
|
load current pulse delay in microsecond after strobe pin pulse high.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 100000
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
richtek,ld-pulse-width-us:
|
||
|
|
description: |
|
||
|
|
Load current pulse width in microsecond after strobe pin pulse high.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 10000
|
||
|
|
default: 1200
|
||
|
|
|
||
|
|
richtek,fsin1-delay-us:
|
||
|
|
description: |
|
||
|
|
Fsin1 pulse high delay in microsecond after vsync signal pulse high.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 100000
|
||
|
|
default: 23000
|
||
|
|
|
||
|
|
richtek,fsin1-width-us:
|
||
|
|
description: |
|
||
|
|
Fsin1 pulse high width in microsecond after vsync signal pulse high.
|
||
|
|
minimum: 40
|
||
|
|
maximum: 10000
|
||
|
|
default: 160
|
||
|
|
|
||
|
|
richtek,fsin2-delay-us:
|
||
|
|
description: |
|
||
|
|
Fsin2 pulse high delay in microsecond after vsync signal pulse high.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 100000
|
||
|
|
default: 23000
|
||
|
|
|
||
|
|
richtek,fsin2-width-us:
|
||
|
|
description: |
|
||
|
|
Fsin2 pulse high width in microsecond after vsync signal pulse high.
|
||
|
|
minimum: 40
|
||
|
|
maximum: 10000
|
||
|
|
default: 160
|
||
|
|
|
||
|
|
richtek,es-pulse-width-us:
|
||
|
|
description: Eye safety function pulse width limit in microsecond.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 10000
|
||
|
|
default: 1200
|
||
|
|
|
||
|
|
richtek,es-ld-current-microamp:
|
||
|
|
description: Eye safety function load current limit in microamp.
|
||
|
|
minimum: 0
|
||
|
|
maximum: 6000000
|
||
|
|
default: 3000000
|
||
|
|
|
||
|
|
richtek,lbp-level-microvolt:
|
||
|
|
description: Low battery protection level in microvolt.
|
||
|
|
minimum: 2400000
|
||
|
|
maximum: 3700000
|
||
|
|
default: 2700000
|
||
|
|
|
||
|
|
richtek,lbp-enable:
|
||
|
|
description: Low battery protection function enable control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
richtek,strobe-polarity-high:
|
||
|
|
description: Strobe pin active polarity control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
richtek,vsync-polarity-high:
|
||
|
|
description: Vsync pin active polarity control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
richtek,fsin-enable:
|
||
|
|
description: Fsin function enable control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
richtek,fsin-output:
|
||
|
|
description: Fsin function output control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
richtek,es-enable:
|
||
|
|
description: Eye safety function enable control.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
lsw:
|
||
|
|
description: load switch current regulator description.
|
||
|
|
type: object
|
||
|
|
$ref: "regulator.yaml#"
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- wakeup-source
|
||
|
|
- interrupts
|
||
|
|
- enable-gpios
|
||
|
|
- lsw
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
rtmv20@34 {
|
||
|
|
compatible = "richtek,rtmv20";
|
||
|
|
reg = <0x34>;
|
||
|
|
wakeup-source;
|
||
|
|
interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
enable-gpios = <&gpio26 3 0>;
|
||
|
|
|
||
|
|
richtek,strobe-polarity-high;
|
||
|
|
richtek,vsync-polarity-high;
|
||
|
|
|
||
|
|
lsw {
|
||
|
|
regulator-name = "rtmv20,lsw";
|
||
|
|
regulator-min-microamp = <0>;
|
||
|
|
regulator-max-microamp = <6000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
...
|