114 lines
3.8 KiB
ReStructuredText
114 lines
3.8 KiB
ReStructuredText
|
Kernel driver abituguru
|
||
|
|
=======================
|
||
|
|
|
||
|
|
Supported chips:
|
||
|
|
|
||
|
|
* Abit uGuru revision 1 & 2 (Hardware Monitor part only)
|
||
|
|
|
||
|
|
Prefix: 'abituguru'
|
||
|
|
|
||
|
|
Addresses scanned: ISA 0x0E0
|
||
|
|
|
||
|
|
Datasheet: Not available, this driver is based on reverse engineering.
|
||
|
|
A "Datasheet" has been written based on the reverse engineering it
|
||
|
|
should be available in the same dir as this file under the name
|
||
|
|
abituguru-datasheet.
|
||
|
|
|
||
|
|
Note:
|
||
|
|
The uGuru is a microcontroller with onboard firmware which programs
|
||
|
|
it to behave as a hwmon IC. There are many different revisions of the
|
||
|
|
firmware and thus effectively many different revisions of the uGuru.
|
||
|
|
Below is an incomplete list with which revisions are used for which
|
||
|
|
Motherboards:
|
||
|
|
|
||
|
|
- uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) [1]_
|
||
|
|
- uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
|
||
|
|
- uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
|
||
|
|
- uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
|
||
|
|
- uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
|
||
|
|
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
|
||
|
|
AW9D-MAX) [2]_
|
||
|
|
|
||
|
|
.. [1] For revisions 2 and 3 uGuru's the driver can autodetect the
|
||
|
|
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
|
||
|
|
this does not always work. For these uGuru's the autodetection can
|
||
|
|
be overridden with the bank1_types module param. For all 3 known
|
||
|
|
revision 1 motherboards the correct use of this param is:
|
||
|
|
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
|
||
|
|
You may also need to specify the fan_sensors option for these boards
|
||
|
|
fan_sensors=5
|
||
|
|
|
||
|
|
.. [2] There is a separate abituguru3 driver for these motherboards,
|
||
|
|
the abituguru (without the 3 !) driver will not work on these
|
||
|
|
motherboards (and visa versa)!
|
||
|
|
|
||
|
|
Authors:
|
||
|
|
- Hans de Goede <j.w.r.degoede@hhs.nl>,
|
||
|
|
- (Initial reverse engineering done by Olle Sandberg
|
||
|
|
<ollebull@gmail.com>)
|
||
|
|
|
||
|
|
|
||
|
|
Module Parameters
|
||
|
|
-----------------
|
||
|
|
|
||
|
|
* force: bool
|
||
|
|
Force detection. Note this parameter only causes the
|
||
|
|
detection to be skipped, and thus the insmod to
|
||
|
|
succeed. If the uGuru can't be read the actual hwmon
|
||
|
|
driver will not load and thus no hwmon device will get
|
||
|
|
registered.
|
||
|
|
* bank1_types: int[]
|
||
|
|
Bank1 sensortype autodetection override:
|
||
|
|
|
||
|
|
* -1 autodetect (default)
|
||
|
|
* 0 volt sensor
|
||
|
|
* 1 temp sensor
|
||
|
|
* 2 not connected
|
||
|
|
* fan_sensors: int
|
||
|
|
Tell the driver how many fan speed sensors there are
|
||
|
|
on your motherboard. Default: 0 (autodetect).
|
||
|
|
* pwms: int
|
||
|
|
Tell the driver how many fan speed controls (fan
|
||
|
|
pwms) your motherboard has. Default: 0 (autodetect).
|
||
|
|
* verbose: int
|
||
|
|
How verbose should the driver be? (0-3):
|
||
|
|
|
||
|
|
* 0 normal output
|
||
|
|
* 1 + verbose error reporting
|
||
|
|
* 2 + sensors type probing info (default)
|
||
|
|
* 3 + retryable error reporting
|
||
|
|
|
||
|
|
Default: 2 (the driver is still in the testing phase)
|
||
|
|
|
||
|
|
Notice: if you need any of the first three options above please insmod the
|
||
|
|
driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
|
||
|
|
dmesg | grep abituguru
|
||
|
|
|
||
|
|
|
||
|
|
Description
|
||
|
|
-----------
|
||
|
|
|
||
|
|
This driver supports the hardware monitoring features of the first and
|
||
|
|
second revision of the Abit uGuru chip found on Abit uGuru featuring
|
||
|
|
motherboards (most modern Abit motherboards).
|
||
|
|
|
||
|
|
The first and second revision of the uGuru chip in reality is a Winbond
|
||
|
|
W83L950D in disguise (despite Abit claiming it is "a new microprocessor
|
||
|
|
designed by the ABIT Engineers"). Unfortunately this doesn't help since the
|
||
|
|
W83L950D is a generic microcontroller with a custom Abit application running
|
||
|
|
on it.
|
||
|
|
|
||
|
|
Despite Abit not releasing any information regarding the uGuru, Olle
|
||
|
|
Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part
|
||
|
|
of the uGuru. Without his work this driver would not have been possible.
|
||
|
|
|
||
|
|
Known Issues
|
||
|
|
------------
|
||
|
|
|
||
|
|
The voltage and frequency control parts of the Abit uGuru are not supported.
|
||
|
|
|
||
|
|
.. toctree::
|
||
|
|
:maxdepth: 1
|
||
|
|
|
||
|
|
abituguru-datasheet.rst
|